Digital Commons Network^™

Adaptive Active Snore Noise Control Using Microphone And Loudspeaker Arrays, Nathan Walker

All Graduate Theses and Dissertations, Fall 2023 to Present

Snoring can wreck a good night’s sleep, not just for the snorer but for their partner, and over time it can strain relationships. Common fixes like CPAP machines, nasal strips, and earplugs either have to be worn or don’t do much against the deep, low-pitched rumble that makes snoring so hard to ignore.

This research explores a different approach, a device that doesn’t need to be worn at all. It uses a small set of microphones to listen to the snoring and a set of speakers to play back carefully timed anti-snore noise, which is sound designed to cancel out …

Extending Geometric Acoustic Ray Tracing To Multi-Room Environments: A Case Study On Gunshot Sound Transmission Between Adjacent Rooms, Tyler Ton

Theses and Dissertations

Accurate localization of gunshots in multi-room building environments remains a challenging problem in acoustic forensics and public safety applications. Existing approaches model sound propagation within a single room, neglecting the transmission of acoustic energy through walls and other building materials. This thesis presents a study on modeling multi-room gunshot acoustic transmission, combining geometric ray tracing with structural acoustic transmission-loss modeling to generate impulse responses for two horizontally adjacent rooms separated by a shared wall, providing a foundation for future inter-room gunshot localization work. The proposed system uses GSound-SIR, a geometric acoustics engine, to simulate sound propagation in both of the …

Lrq-Solver: A Transformer-Based Neural Operator For Fast And Accurate Solving Of Large-Scale 3d Pdes, Peijian Zeng, Guan Wang, Haohao Gu, Xiaoguang Hu, Tiezhu Gao, Zhuowei Wang, Aimin Yang, Xiaoyu Song

Electrical and Computer Engineering Faculty Publications and Presentations

Solving large-scale PDEs on complex three-dimensional geometries remains a central challenge in scientific and engineering computing, often due to expensive pre-processing stages and high computational overhead. We present Low-Rank Query-based PDE Solver (LRQ-Solver), a physics-integrated deep learning framework for efficient CAE simulations of complex three-dimensional geometries in CAD-driven design analysis. Built upon the Parameter-Conditioned Lagrangian Modeling (PCLM) that embeds physical consistency into the learning process and the Low-Rank Query Attention (LR-QA) module that reduces attention complexity from O(N2) to O(NC2+C3) via covariance decomposition, LRQ-Solver supports multi-configuration analysis within iterative design workflows. On two benchmark datasets, it achieves a 28.6% error …

Influence Of Particle Properties And Grain Size On Aggregation In Dry Particle-Laden Volcanic Jets, Md Miraz Hossain, Stephen A. Solovitz, Josef Dufek, Joshua S. Mendez Harper, Alexa R. Van Eaton, Mary C. Benage, Larry G. Mastin, Benjamin J. Andrews

Electrical and Computer Engineering Faculty Publications and Presentations

Explosive volcanic eruptions can inject large amounts of ash into the atmosphere. These suspended particles pose hazards to aircraft, so a better understanding of the ash residence time and transport distance is needed. Fine particles combine to form larger aggregates, altering their settling behavior. Ash aggregation is influenced by liquid bonding, electrostatic forces, and preferential concentration driven by turbulence. We examine particle aggregation through controlled, low-humidity experiments at similar particle-fluid scaling to conditions near a volcanic vent. Particle-laden jets used compressed air containing three types of particles at controlled mass loadings: hollow glass spheres (∼10 μm diameter), solid nickel spheres …

Comprehensive Variable-Temperature Raman And Spectroscopic Ellipsometry Investigation Of Bulk Undoped, Fe-Doped, And Ge-Doped Gan: Correlated Phonon, Carrier, Optical, And Disorder Dynamics, Manika Tun Nafisa, Sm Atiqur Rahman, Zhe Chuan Feng, Sandip Das, James N. Hilfiker, Nina Jong, Ian T. Ferguson, Benjamin Klein

Faculty Articles

Bulk gallium nitride (GaN) substrates with controlled electrical compensation and doping are foundational materials for high-power electronics, optoelectronics, and emerging spintronic devices. Despite extensive studies on epitaxial GaN thin films, a complete and correlated understanding of crystal, phonon, free-carrier, birefringence, optical, and disorder-driven processes in high-quality bulk GaN crystals remains limited. In this work, a comprehensive temperature-dependent (25–300 °C) investigation of free-standing bulk undoped, Fe-doped, and Ge-doped GaN substrates using Raman spectroscopy, spectroscopic ellipsometry (SE), and atomic force microscopy (AFM) has been presented. A detailed analysis of phonon evolution, apparent Raman-shift-derived biaxial stress and in-plane strain, longitudinal optical phonon–plasmon coupling …

Estimation Of Unmeasurable External Disturbances Of A Dynamic Object Based On A Robust Adaptive Kalman Filter, Bunyod Mamurjon Ugli Buronov

Technical science and innovation

This article considers the problem of directly estimating unmeasurable external disturbances acting on a dynamic object under the condition that the state vector of the object is available for measurement. In the considered case, the problem is reduced to the estimation of an unknown input of a dynamic system. It is shown that when the system state is measurable, both a direct inversion scheme based on the object’s dynamic equation and filtering methods that eliminate the need for coarse numerical differentiation can be applied. For slowly varying disturbances, a random walk model with a small process noise covariance is proposed, …

Mathematical Modelling Of Nitrification And Denitrification Processes Based On Neuro-Fuzzy Bioreactor Models, Mirkhalil Agzamovich Ismailov, Boburbek Zokirjon Ugli Mannobjonov

Technical science and innovation

This paper presents the development and investigation of hybrid neural network and fuzzy models for the mathematical modelling of nitrification and denitrification processes in a biological wastewater treatment bioreactor. A comprehensive approach is proposed, integrating a mechanistic model of the ASM1/ASM2d type with neural networks (LSTM and Gaussian Process Regression), as well as a fuzzy control system based on an extended set of expert rules. A digital twin of the bioreactor was developed to allow for the prediction of the dynamic behavior of key parameters such as NH₄⁺, NO₃⁻, dissolved oxygen, etc. within a prediction range of 1 to 12 …

Investigation Of The Production Technology Of Environmentally Safe Urethane Oligomers Based On Local Raw Materials, Bakhtiyor Kudratovich Shaykulov, Dilafruza Ruziboevna Akbarova Gulboeva, Fayzulla Nurmuminovich Nurqulov

Technical science and innovation

This paper investigates the step-by-step poly condensation pathway for synthesizing environmentally friendly, non-isocyanate urethane oligomers derived from local and safe raw materials: urea and ethylene glycol. The influence of thermodynamic parameters on the target product yield was systematically evaluated to determine the optimum technological matrix. Specifically, a 1:2 reactant mass ratio, a stable stationary temperature of 150-155 °C, and a reaction duration of 2 hours under an inert nitrogen atmosphere resulted in a sustainable and reproducible yield of 72%. Thermal degradation and competitive side-product condensations were activated above 160 °C, leading to a sharp drop in overall chemical efficiency. The …

Evaluation Of Level Measurement Uncertainty For Three Types Of Laser Level Meters Using The Gum Methodology: Calculated Uncertainty Budgets, Uncertainty Profile, And Hardware Component Requirements, Lazizbek Furkatjanovich Saidoripov, Barat Makhmudovich Akhmedov

Technical science and innovation

A methodology is presented for evaluating the uncertainty of liquid petroleum product level measurements using laser level meters based on different measurands’ informative parameters: propagation time, phase difference, and image coordinates. Based on analytical expressions for error components and a traceability chain to the national length standard, calculated uncertainty budgets are developed in accordance with JCGM 100 for time-of-flight, phase-based, and laser–television level meters. Under the assumed input conditions, the expanded uncertainties (k = 2) are 1.66, 0.73, and 1.02 mm, respectively. For the laser–television level meter budget, the Gaussian approximation is verified using the Monte Carlo method (JCGM 101): …

A Nonlinear Viscoelastic 3d Bellows Microspring Fabricated With Two-Photon Polymerization, Harris J. Hall, Tyler Grunzke, Samuel Campbell, Hengky Chandrahalim

Faculty Publications

In the past decade, two-photon polymerization (TPP) based 3D printing has gained popularity for prototype fabrication of micro and nanoscale structures and mechanical metamaterials. However, practical considerations including response uniformity, nonlinear behaviors, and material aging effects remain challenges for device maturation and are seldom reported. In this work, a pair of cylindrical microscale bellows springs (~ 100 μm diameter), fabricated with a commercial TPP 3D printer, are shown to exhibit nonlinear stiffness profiles under compression (up to ~ 7%), with distinct linear and nonlinear regions, that change significantly after ~ 9–10 months of open air exposure in ambient lab conditions. …

Analysis And Study Of The Content Of Chloride Salts In Oil, Natalia Evgenievna Sheina, Muborak Akramovna Mirshomilova

Technical science and innovation

The article addresses the critical issue of crude oil quality control, specifically focusing on the determination of chloride salts (sodium, calcium, and magnesium), which exert a destructive impact on processing equipment. The paper provides a detailed analysis of the adverse effects of salts, which lead to severe equipment corrosion, scaling, and a reduced yield of valuable oil fractions. The chemical principles and specific applications of two standardized methods for analyzing aqueous extracts according to GOST 21534-2021 and ASTM D3230 are described: indicator (argentometric and mercurimetric) and potentiometric titration. The experimental section presents the results of a comparative analysis of crude …

Automatic +1 Diffraction Order Detection In Off-Axis Digital Holographic Interferometry Using An Energy-Based Spectral Model, Nigora Alimdjanovna Akbarova, Dilnoza Ibrokhim Kizi Abdulkhayeva

Technical science and innovation

This paper presents an automatic +1 diffraction order detection algorithm for off-axis digital holographic interferometry (DHI Manual spectral filtering is widely used to find out the desired order of diffraction in the Fourier domain in conventional digital holographic reconstruction. Nevertheless, this approach is very subjective and must be subject to expert guidance, thus, the reconstruction reproducibility and stability can often deteriorate. To address these limitations, this designed scheme constructs a spectral model utilizing energy-maximization as well as adaptive DC suppression and dynamic filter radius estimates. The algorithm itself can automatically observe the distribution of energy in the hologram spectrum and …

Evaluation Of The Metrological Characteristics Of An Ultrasonic Flowmeter For Water Resources, Makhsud Idrisovich Makhmudov, Uktam Farkhodovich Mamirov, Siroj Sobirovich Nurov

Technical science and innovation

This paper presents the results of evaluating the metrological characteristics of a developed ultrasonic flowmeter intended for measuring water flow in open channels. The study analyzes the main sources of measurement errors and classifies them into methodological, instrumental, additional, systematic, and random components. Experimental investigations were carried out to estimate the random and systematic errors under steady-state flow conditions. Using the least-squares method, the systematic error was separated into additive and multiplicative components, providing a basis for calibration and correction of the measurement results. The reliability of the developed measuring instrument was evaluated using the failure rate method based on …

Development Of An Experimental Stand For The Study Of The Directions Of Movement And Velocity Of Air Flows In The Pneumatic Channel Of The Final Aspiration Of The Muz-16 Air Sieve Separator, Hanna Borisovna Torgan, Zulfiya Kakhramonovna Ergasheva

Technical science and innovation

The article presents the results of experimental studies on the rheological properties of pasta dough obtained from various types of wheat flour (bakery highest grade, as well as durum varieties of Belarusian selection). The regularities of changes in the yield shear stress, plastic viscosity, and shear rate of the semi-finished product were studied depending on the key technological factors of extrusion: moisture content (0.28–0.335 kg/kg), temperature (25–55 °C), and discharge pressure (up to 88 · 10^-5 Pa). The operating principle and design features of the modernized pressing unit and die using special converging-diverging (confuser-diffuser) inserts (according to the patents …

Research On The Effectiveness Of Various Methods For Primary Processing Of Silkworm Cocoons, Doston Ishmukhammat Ugli Samandarov

Technical science and innovation

This article presents the results of experimental studies of the primary processing (killing) of silkworm pupae using existing technological methods, as well as three different combinations of infrared (IR) and ultrasound (US). A series of pilot studies was conducted in the laboratory of the Department of Service Technology at Tashkent State Technical University on nine cocoon samples using existing technological equipment and an experimental setup developed under project AL-8724053050 and based on the combined effects of infrared radiation and ultrasound. A comparative evaluation of the studied processing methods was conducted based on the degree of pupal killing, moth hatching, process …

Integrating Gis With Interim Payment Valuation In Road Construction Projects: A Conceptual Framework, Abdulrahman I. Iro, Juma M. Matindana, Julian Ijumulana

Tanzania Journal of Engineering and Technology (TJET)

Abstract

Interim Payment Valuation is a critical process in road construction contract administration, yet conventional valuation practices remain heavily dependent on manual measurements, fragmented documentation, spreadsheets, and professional judgement. These limitations can affect measurement accuracy, transparency, traceability, and the timeliness of payment certification. Although Geographic Information Systems have increasingly been applied to construction planning, quantity measurement, progress monitoring, infrastructure management, and decision support, their integration with contractual and financial processes for interim payment valuation remains insufficiently explored. This study therefore develops a conceptual framework for integrating GIS with Interim Payment Valuation in road construction projects. A PRISMA-guided structured literature review …

Voltage-Related Power Quality Issues And Impacts On Distribution Networks With Sensitive Loads - A Review, Godwin Elinazi Mnkeni, Jackson Justo, Aviti Thadei Mushi, Bakari M. M. Mwinyiwiwa

Tanzania Journal of Engineering and Technology (TJET)

Voltage disturbances are the most important power quality (PQ) complications that customers and power utilities face in this smart era. The growing adoption of sophisticated electronic equipment and integration of renewable energy sources (RES) into power grids has increased the susceptibility of power distribution networks (PDNs) to voltage sags, swells, interruptions, flicker, and voltage imbalance. These disturbances, mainly caused by upstream faults, switching operations, and RES integration, compromise voltage PQ and system reliability. Consequently, they accelerate equipment degradation, increase electronic waste (e-waste), raise reactive power demand and maintenance costs, increase power losses, and impose substantial economic losses on customers and …

Analysis And Design Of Multi-Winding Current Ballasted Magnetics For Integrated Dc-Dc Conversion, Kishalay Datta

Dartmouth College Ph.D Dissertations

Power conversion circuits have become a bottleneck in terms of reducing the size and cost of modern electronic systems in a vast number of applications ranging from personal devices, to automotive systems, to data centers. This has motivated designs at higher frequencies where smaller passive components can be used. Unfortunately, magnetic components scale poorly to smaller dimensions. In addition, the AC resistance of magnetic components deteriorates due to current crowding effects at high frequencies. This has resulted in fully- integrated power converters with planar magnetic components having efficiencies lower than what may be theoretically achieved. In this work, we investigate …

Ph-Compensated Hydrogen Peroxide Quantification Using A Dual-Modal Fiber-Optic Probe, Homayoon Soleimani Dinani, Bohong Zhang, Maryam Karimi, Rex E. Gerald, Shelley D. Minteer, Jie Huang

Electrical and Computer Engineering Faculty Research & Creative Works

We report a dual-modal fiber-optic probe that integrates electrochemical quantification of hydrogen peroxide (H₂O₂) with co-localized fluorescent pH sensing for pH-indexed interpretation of the H₂O₂ response. H₂O₂ is a reactive oxygen species involved in oxidative stress, inflammation, and cellular signaling, and local pH modulates both its production and electrochemical response. Many electrochemical H₂O₂ sensors exhibit pH-dependent sensitivity, creating ambiguity unless pH is measured and used for compensation, which is difficult in small, heterogeneous, or rapidly changing microenvironments. A three-electrode configuration—working (WE), counter (CE), and Ag/AgCl pseudo-reference (pRE) electrodes—is fabricated directly on the cylindrical surface of a 710-µm-diameter optical fiber using …

Disturbance-Learning Inertia Estimation Using Artificial Neural Networks For Power System Stability, Sospeter Igaanja Gabriel, Francis Mwasilu, Peter Makolo Dr.

Tanzania Journal of Engineering and Technology (TJET)

ABSTRACT

Power systems are progressively shifting towards low inertia as a result of incorporating significant amounts of intermittent and converter-based renewable energy sources, such as wind and solar power, into the current power grid network. This integration poses considerable problems to inertia and frequency control within the network due to a reduction in the proportion of synchronous generators. Furthermore, rapid frequency deviations occur due to the disparity between supply and demand during contingencies, complicating the maintenance of frequency stability within the power system. The disturbance-learning inertia estimation method for power system stability is presented. The simulation analysis is performed using …

Fast Sparse Image Reconstruction Models In Through-The-Wall Radars: A Review, Aude Kileo, Hashimu U. Iddi, Abdi Abdalla

Tanzania Journal of Science

Through-the-Wall Radar Imaging (TWRI) is a modern technology that uses electromagnetic waves to detect objects behind walls, with key applications in surveillance, rescue operations, and reconnaissance. Achieving high resolution in both down-range and cross-range requires ultra-wideband signals and long apertures, resulting in large data volumes, increased acquisition time, and high memory demands. TWRI employs Compressive Sensing (CS) to reduce computational time, which has proved its significance in many recent TWRI applications. However, in CS, image reconstruction approaches shift the computational burden from the sensing stage to the recovery stage, which prolongs the reconstruction times, making it unsuitable in time-sensitive applications. …

Dense Platinum Nanoparticles Confined In Mn-N-C Nanocages For Robust Heavy-Duty Pemfcs, Lei Zhao, Zhen-Min Cao, Jia-Yu Zuo, Ming-Liang Yang, Hong-Yan Qiao, Jun-Song Chen, Rui Wu

Journal of Electrochemistry

High-loading Pt cathodes are essential for heavy-duty proton exchange membrane fuel cells but suffer from a critical tradeoff between ionomer sulfonate poisoning and nanoparticle instability. Herein, we report a spatial confinement strategy to encapsulate dense Pt nanoparticles (~51.8 wt%) within Mn/N-co-doped mesoporous carbon nanocages (denoted as Pt-MnNC). This architecture excludes bulky ionomers to create an ionomer-shielded environment against sulfonate poisoning, while Mn-N_x-mediated strong metal-support interactions anchor the Pt nanoparticles to prevent agglomeration and further boost durability. In the 5 × 5 cm² membrane electrode assembly tests, the Pt-MnNC catalyst delivers an exceptional power density of 1.26 W·cm …

Engineering Small-Sized Cations With Strong Solvation For High-Voltage Supercapacitors, Tong Huo, Pan Liu, Hao Chen, Peng Zhang, Zhen-Lei Chen, Guo-Fu Sun, Zhi-Qiang Shi, Jing Wang

Journal of Electrochemistry

Supercapacitors (SCs) have attracted much attention in the field of energy storage due to their high power density and long cycle life. However, their relatively low energy density limits their application in a wider range of fields. Methods to increase energy density include enhancing specific capacitance and extending operating voltage window. Herein, we report a novel electrolyte salt, tetramethylammonium bis(fluorosulfonyl)imide (TMA-FSI), the resulting electrolyte formed with propylene carbonate (PC), designated as TMF, exhibited a wide electrochemical stability window (ESW) of 5.09 V. On the one hand, we found that the small size of TMA⁺ enables it to enter the …

Efficient Acidic H2O2 Electrosynthesis Over Co Atoms Anchored On Nitrogen-Doped Hierarchical Porous Carbon, Xiao Huang, Zi-Hao Zhan, Hao-Xu Niu, Guan-Yu Luo, Jin-Tao Huang, Bo-Xuan Jin, De-Li Wang

Journal of Electrochemistry

The two-electron oxygen reduction reaction (2e⁻ ORR) presents a promising route for the on-site production of hydrogen peroxide (H₂O₂), offering a green alternative to energy-consuming anthraquinone process. However, the high selectivity toward the competing 4e⁻ ORR over the desired 2e⁻ pathway leads to low Faradaic efficiency for H₂O₂, posing a critical challenge in catalyst design. In this work, a nitrogen-doped hollow hierarchical porous carbon with anchored Co atoms (CoN/HPC) was constructed for high-performance H₂O₂ production. The as-prepared Co-N/HPC catalyst showed excellent 2e⁻ ORR performance, achieving …

Superiorgat: Graph Attention Networks For Sparse Lidar Point Cloud Reconstruction In Autonomous Systems, Khalfalla Awedat, Mohamed Abidalrekab, Gurcan Comert, Mustafa Ayad, Negash Begashaw

Electrical and Computer Engineering Faculty Publications and Presentations

LiDAR-based perception in autonomous systems is fundamentally limited by sparse vertical sampling and further degraded by structured beam dropout caused by occlusions, sensor faults, or reduced-cost LiDAR hardware. These degradations disrupt vertical geometric continuity and negatively affect downstream perception tasks such as object detection, localization, and scene understanding. Existing reconstruction approaches often struggle to balance reconstruction accuracy with the computational efficiency required for real-time autonomous operation. This paper presents SuperiorGAT, a graph attention–based framework for reconstructing missing elevation information in sparse LiDAR point clouds under structured beam loss. The proposed method models LiDAR scans as beam-aware graphs and enhances standard …

Multi-Solution Ternary Grover’S Algorithm For Logic-Based Quantum Machine Learning With Pseudo-Kronecker Reed–Muller Form Minimization, Sophia Lee, Ali Al-Bayaty, Marek Perkowski

Electrical and Computer Engineering Faculty Publications and Presentations

Optimization problems in machine-learning (ML) applications can be computationally challenging for classical methods, particularly when they involve large, unstructured search spaces. Quantum computing offers a promising approach to combinatorial optimization by utilizing quantum superposition and amplitude amplification. This paper presents a new methodology using logic-based quantum machine learning (QML) as a complete framework for employing a multi-solution ternary Grover’s algorithm to minimize incomplete binary functions represented by Pseudo-Kronecker Reed–Muller (PKRO) expansions, consistent with Occam’s razor principle. Unlike previous quantum approaches based on Kronecker Reed–Muller (KRO) or fixed-polarity Reed–Muller (FPRM) representations, our work introduces the first Grover-based optimization framework for PKRO …

A Quad-Port Dual-Band Elliptical Patch Mimo Antenna For 5g And Wlan Applications, Livingstone L. Kimaro, Hashimu Uledi Iddi, Mussa M. Kissaka, Neema S. Joseph

Tanzania Journal of Engineering and Technology (TJET)

A dual-band multiple-input multiple-output (MIMO) antenna for wireless local area network (WLAN) and fifth-generation new radio (5G NR) band n104 applications is presented. Two U-shaped slots interconnected back to back are etched on an elliptical shaped patch, four identical patch elements are then arranged orthogonally to form a quad-port antenna that resonates at 5.8 GHz and 6.7 GHz. Without additional extrinsic decoupling structures, the proposed design achieves measured isolation levels above 25.13 dB and 21.31dB, realized gains of 7 dBi and 7.2 dBi and -10 dB impedance bandwidths of 155.4 MHz and 90 MHz in the lower and upper frequency …

Design Of Permanent Magnet Synchronous Motor For Railways Traction Application, Anna S. Mwang'onda, Jackson J. Justo, Francis Mwasilu

Tanzania Journal of Engineering and Technology (TJET)

This paper presents the design of surface mounted permanent magnet synchronous motor (SMPMSM) intended for traction applications in standard gauge railway (SGR) for passengers. The proposed motor is rated 350 kW with a base speed of 3000 rpm. Moreover, speed control strategy with stability analysis is incorporated in the design to validate the performance of the SPMSM. The simulation results achieved a torque of approximately 1115 Nm at a terminal voltage of 800 V. The flux linkage of 150 mVs which ensures effective electromagnetic pertinence while maintaining safe magnetic loading because the flux density is less than 1.5 T. The …

Challenges, Trends, And The Role Of Lstm In Ai-Based Predictive Maintenance Of Electrolyzers For Solar Hydrogen Systems: A Review, Yani Koerniawan Kuatno, Muhamad Zahim Sujod

Turkish Journal of Electrical Engineering and Computer Sciences

The transition toward low-carbon energy systems has increased interest in hydrogen as a clean energy carrier, with solar-driven water electrolysis emerging as a promising technology due to its high efficiency and compatibility with renewable energy sources. However, dynamic operating conditions and intermittent renewable input accelerate electrolyzer degradation, reducing reliability and system lifespan. Predictive maintenance (PdM), supported by artificial intelligence (AI), offers a data-driven approach to anticipate failures and improve operational durability. This review systematically investigates AI-based PdM approaches for electrolyzers, with an emphasis on long short-term memory (LSTM) networks and Internet of things (IoT) integration. Following PRISMA 2020 guidelines, 35 …

Dynamic Focal Loss Adjustment For Railway Defect Detection, Mehmet Koç, Ridvan Özdemi̇r, Ömer Gerek

Turkish Journal of Electrical Engineering and Computer Sciences

Railway infrastructure is critical to the safe and efficient operation of transportation systems, and the early detection of defects is essential for preventing catastrophic failures. Automated defect detection methods are therefore crucial for maintaining continuous safety while reducing maintenance costs. Although Focal Loss is widely used in object detection under class-imbalanced conditions, its fixed α parameter may limit its effectiveness in detecting rare defects. In this study, we propose an adaptive α-tuned Focal Loss approach that dynamically adjusts class weights based on average precision (AP) values. By iteratively optimizing α without relying on gradient-based optimization, the proposed method improves the …