Digital Commons Network^™

Depth And Frequency Dependence Of Geoacoustic Properties On The New England Mud Patch From Reflection Coefficient Inversion, Jiang Yong-Min, Charles W. Holland, Stan E. Dosso, Jan Dettmer

Electrical and Computer Engineering Faculty Publications and Presentations

Muddy sediments cover significant portions of continental shelves, but their physical properties remain poorly understood compared to sandy sediments. This paper presents a generally applicable model for sediment-column structure and variability on the New England Mud Patch (NEMP), based on trans-dimensional Bayesian inversion of wide-angle, broadband reflection-coefficient data in this work and in two previously published reflection-coefficient inversions at different sites on the NEMP. The data considered here include higher frequencies and larger bandwidth and cover lower reflection grazing angles than the previous studies, hence, resulting in geoacoustic profiles with significantly better structural resolution and smaller uncertainties. The general sediment-column …

Generation Of Dna Oligomers With Similar Chemical Kinetics Via In-Silico Optimization, Michael Tobiason, Bernard Yurke, William L. Hughes

Electrical and Computer Engineering Faculty Publications and Presentations

Networks of interacting DNA oligomers are useful for applications such as biomarker detection, targeted drug delivery, information storage, and photonic information processing. However, differences in the chemical kinetics of hybridization reactions, referred to as kinetic dispersion, can be problematic for some applications. Here, it is found that limiting unnecessary stretches of Watson-Crick base pairing, referred to as unnecessary duplexes, can yield exceptionally low kinetic dispersions. Hybridization kinetics can be affected by unnecessary intra-oligomer duplexes containing only 2 base-pairs, and such duplexes explain up to 94% of previously reported kinetic dispersion. As a general design rule, it is recommended that unnecessary …

Fortifying Iot Against Crimpling Cyber-Attacks: A Systematic Review, Usman Tariq, Irfan Ahmed, Muhammad Attique Khan, Ali Kashif Bashir

Karbala International Journal of Modern Science

The rapid growth and increasing demand for Internet of Things (IoT) devices in our everyday lives create exciting opportunities for human involvement, data integration, and seamless automation. This fully interconnected ecosystem considerably impacts crucial aspects of our lives, such as transportation, healthcare, energy management, and urban infrastructure. However, alongside the immense benefits, the widespread adoption of IoT also brings a complex web of security threats that can influence society, policy, and infrastructure conditions. IoT devices are particularly vulnerable to security violations, and industrial routines face potentially damaging vulnerabilities. To ensure a trustworthy and robust security framework, it is crucial to …

Smart Service Function Chain System For Dynamic Traffic Steering Using Reinforcement Learning (Chrl), Ahmed Nadhum, Ahmed Al-Saadi

Karbala International Journal of Modern Science

The rapid development of the Internet and network services coupled with the growth of communication infrastructure necessitates the employment of intelligent systems. The complexity of the network is heightened by these systems, as they offer diverse services contingent on traffic type, user needs, and security considerations. In this context, a service function chain offers a toolkit to facilitate the management of intricate network systems. However, various traffic types require dynamic adaptation in the sets of function chains. The problem of optimizing the order of service functions in the chain must be solved using the proposed approach, along with balancing the …

Cyber-Physical Multi-Robot Systems In A Smart Factory: A Networked Ai Agents Approach, Zixiang Nie

USF Tampa Graduate Theses and Dissertations

This dissertation focuses on addressing the technical challenges of non-stationarity in smart factories through the use of cyber-physical AI agents. Industry 4.0 and smart manufacturing with smart factories as a central role, have a growing demand for Just-in-Time (JIT) and on-demand production, as well as mass customization—all while maintaining high productivity, resource efficiency and resilience. This research positions Multi-Robot Systems (MRS)-driven smart factories. The heterogeneous production and transportation robots in an MRS collaborate to form multiple real-time adjusted production flows achieving the flexibility to accommodate such on-demand, mass customization.

However, the implementation of MRS introduces new sets of challenges, including …

Enhancing Exploration-Exploitation In Harmony Search For Airborne Hyperspectral Imaging Band Selection (E3hs), Mohammed Abdulmajeed Moharram, Divya Meena Sundaram

Turkish Journal of Electrical Engineering and Computer Sciences

Hyperspectral imaging has emerged as a prominent area of research in the field of remote sensing science. However, hyperspectral images (HSIs) pose a notable challenge due to the presence of numerous irrelevant and redundant spectral bands exhibiting high correlation. Therefore, it is necessary to enhance the classification performance for HSI processing by selecting the most relevant discriminative spectral bands. To this end, this paper introduces a metaheuristic search method called enhancing exploration-exploitation in harmony search (E3HS). The standard harmony search suffers from many weaknesses, such as premature convergence and falling easily into the local optimum. Consequently, E3HS was proposed to …

Multi-View Brain Tumor Segmentation (Mvbts): An Ensemble Of Planar And Triplanar Attention Unets, Snehal Rajput, Rupal Kapdi, Mehul Raval, Mohendra Roy

Turkish Journal of Electrical Engineering and Computer Sciences

3D UNet has achieved high brain tumor segmentation performance but requires high computation, large memory, abundant training data, and has limited interpretability. As an alternative, the paper explores using 2D triplanar (2.5D) processing, which allows images to be examined individually along axial, sagittal, and coronal planes or together. The individual plane captures spatial relationships, and combined planes capture contextual (depth) information. The paper proposes and analyzes an ensemble of uniplanar and triplanar UNets combined with channel and spatial attention for brain tumor segmentation. It investigates the significance of each plane and analyzes the impact of uniplanar and triplanar ensembles with …

A Unique Hybrid Domain Hand-Crafted Feature To Classify Colorectal Tissue Histopathological Images Using Multiheaded Cnn, Anurodh Kumar, Amit Vishwakarma, Varun Bajaj

Turkish Journal of Electrical Engineering and Computer Sciences

Early diagnosis of colorectal cancer lengthens human life and is helpful in efforts to cure the illness. Histopathological inspection is a routinely utilized technique to diagnose it. Visual assessment of histopathological images takes more investigation time, and the decision is based on the individual perceptions of clinicians. The existing methods for colorectal cancer classification use only spatial information. However, studies on the spectral domains of information are lacking in the literature. Therefore, the performance of the existing techniques is moderate. To improve the performance of colorectal cancer classification, this work proposes a unique hybrid domain hand-crafted feature formulated using scale-invariant …

Hybrid Machine Learning Model To Predict Chronic Kidney Diseases Using Handcrafted Features For Early Health Rehabilitation, Amjad Rehman, Tanzila Saba, Haider Ali, Narmine Elhakim, Noor Ayesha

Turkish Journal of Electrical Engineering and Computer Sciences

Chronic kidney diseases proliferate due to hypertension, diabetes, anemia, obesity, smoking etc. Patients with such conditions are sometimes unaware of first symptoms, complicating disease diagnosis. This paper presents chronic kidney disease (CKD) prediction model to classify CKD patients from NCKD (Non-CKD). The proposed study has two main stages. First, we found the odds ratio through logistic regression and comparison test to identify early risk factors from kidneys? MRI and differentiate CKD from NCKD subjects. In stage 2, LR, LDA, MLP classifiers were applied to predict CKD and NCKD by extracting features from MRI. The odds ratio of blood glucose random …

Cognitive Digital Modelling For Hyperspectral Image Classification Using Transfer Learning Model, Mohammad Shabaz, Mukesh Soni

Turkish Journal of Electrical Engineering and Computer Sciences

Deep convolutional neural networks can fully use the intrinsic relationship between features and improve the separability of hyperspectral images, which has received extensive in recent years. However, the need for a large number of labelled samples to train deep network models limits the application of such methods. The idea of transfer learning is introduced into remote sensing image classification to reduce the need for the number of labelled samples. In particular, the situation in which each class in the target picture only has one labelled sample is investigated. In the target domain, the number of training samples is enlarged by …

Classification Of Chronic Pain Using Fmri Data: Unveiling Brain Activity Patterns For Diagnosis, Rejula V, Anitha J, Belfin Robinson

Turkish Journal of Electrical Engineering and Computer Sciences

Millions of people throughout the world suffer from the complicated and crippling condition of chronic pain. It can be brought on by several underlying disorders or injuries and is defined by chronic pain that lasts for a period exceeding three months. To better understand the brain processes behind pain and create prediction models for pain-related outcomes, machine learning is a potent technology that may be applied in Functional magnetic resonance imaging (fMRI) chronic pain research. Data (fMRI and T1-weighted images) from 76 participants has been included (30 chronic pain and 46 healthy controls). The raw data were preprocessed using fMRIprep …

Trcaptionnet: A Novel And Accurate Deep Turkish Image Captioning Model With Vision Transformer Based Image Encoders And Deep Linguistic Text Decoders, Serdar Yildiz, Abbas Memi̇ş, Songül Varli

Turkish Journal of Electrical Engineering and Computer Sciences

Image captioning is known as a fundamental computer vision task aiming to figure out and describe what is happening in an image or image region. Through an image captioning process, it is ensured to describe and define the actions and the relations of the objects within the images. In this manner, the contents of the images can be understood and interpreted automatically by visual computing systems. In this paper, we proposed the TRCaptionNet a novel deep learning-based Turkish image captioning (TIC) model for the automatic generation of Turkish captions. The model we propose essentially consists of a basic image encoder, …

Yolo And Lsh-Based Video Stream Analytics Landscape For Short-Term Traffic Density Surveillance At Road Networks, Lavanya K, Stuti Tiwari, Rahul Anand, Jude Hemanth

Turkish Journal of Electrical Engineering and Computer Sciences

The duty of monitoring traffic during rush hour is difficult due to the fact that modern roadways are getting more crowded every day. The automated solutions that have already been created in this area are ineffective at processing enormous amounts of data in a short amount of time, leading to ineffectiveness and inconsistent results. The YOLO (you only look once) and LSH (locality sensitive hashing) algorithms are combined with the Kafka architecture in this study to create a method for assessing traffic density in real-time scenarios. Our concept, which is specifically designed for vehicular networks, predicts the traffic density in …

Deep Feature Extraction, Dimensionality Reduction, And Classification Of Medical Images Using Combined Deep Learning Architectures, Autoencoder, And Multiple Machine Learning Models, Ahmet Hi̇dayet Ki̇raz, Fatime Oumar Djibrillah, Mehmet Emi̇n Yüksel

Turkish Journal of Electrical Engineering and Computer Sciences

Accurate analysis and classification of medical images are essential factors in clinical decision-making and patient care. A novel comparative approach for medical image classification is proposed in this study. This new approach involves several steps: deep feature extraction, which extracts the informative features from medical images; concatenation, which concatenates the extracted deep features to form a robust feature vector; dimensionality reduction with autoencoder, which reduces the dimensionality of the feature vector by transforming it into a different feature space with a lower dimension; and finally, these features obtained from all these steps were fed into multiple machine learning classifiers (SVM, …

Feature Distillation From Vision-Language Model For Semisupervised Action Classification, Asli Çeli̇k, Ayhan Küçükmani̇sa, Oğuzhan Urhan

Turkish Journal of Electrical Engineering and Computer Sciences

The training of supervised machine learning approaches is critically dependent on annotating large-scale datasets. Semisupervised learning approaches aim to achieve compatible performance with supervised methods using relatively less annotation without sacrificing good generalization capacity. In line with this objective, ways of leveraging unlabeled data have been the subject of intense research. However, semisupervised video action recognition has received relatively less attention compared to image domain implementations. Existing semisupervised video action recognition methods trained from scratch rely heavily on augmentation techniques, complex architectures, and/or the use of other modalities while distillation-based methods use models that have only been trained for 2D …

Cccd: Corner Detection And Curve Reconstruction For Improved 3d Surface Reconstruction From 2d Medical Images, Mriganka Sarmah, Arambam Neelima

Turkish Journal of Electrical Engineering and Computer Sciences

The conventional approach to creating 3D surfaces from 2D medical images is the marching cube algorithm, but it often results in rough surfaces. On the other hand, B-spline curves and nonuniform rational B-splines (NURBSs) offer a smoother alternative for 3D surface reconstruction. However, NURBSs use control points (CTPs) to define the object shape and corners play an important role in defining the boundary shape as well. Thus, in order to fill the research gap in applying corner detection (CD) methods to generate the most favorable CTPs, in this paper corner points are identified to predict organ shape. However, CTPs must …

Focal Modulation Network For Lung Segmentation In Chest X-Ray Images, Şaban Öztürk, Tolga Çukur

Turkish Journal of Electrical Engineering and Computer Sciences

Segmentation of lung regions is of key importance for the automatic analysis of Chest X-Ray (CXR) images, which have a vital role in the detection of various pulmonary diseases. Precise identification of lung regions is the basic prerequisite for disease diagnosis and treatment planning. However, achieving precise lung segmentation poses significant challenges due to factors such as variations in anatomical shape and size, the presence of strong edges at the rib cage and clavicle, and overlapping anatomical structures resulting from diverse diseases. Although commonly considered as the de-facto standard in medical image segmentation, the convolutional UNet architecture and its variants …

Infrared Imaging Segmentation Employing An Explainable Deep Neural Network, Xinfei Liao, Dan Wang, Zairan Li, Nilanjan Dey, Rs Simon, Fuqian Shi

Turkish Journal of Electrical Engineering and Computer Sciences

Explainable AI (XAI) improved by a deep neural network (DNN) of a residual neural network (ResNet) and long short-term memory networks (LSTMs), termed XAIRL, is proposed for segmenting foot infrared imaging datasets. First, an infrared sensor imaging dataset is acquired by a foot infrared sensor imaging device and preprocessed. The infrared sensor image features are then defined and extracted with XAIRL being applied to segment the dataset. This paper compares and discusses our results with XAIRL. Evaluation indices are applied to perform various measurements for foot infrared image segmentation including accuracy, precision, recall, F1 score, intersection over union (IoU), Dice …

Enabling Intelligent Network Management Through Multi-Agent Systems: An Implementation Of Autonomous Network System, Petro Mushidi Tshakwanda

Electrical and Computer Engineering ETDs

This Ph.D. dissertation presents a pioneering Multi-Agent System (MAS) approach for intelligent network management, particularly suited for next-generation networks like 5G and 6G. The thesis is segmented into four critical parts. Firstly, it contrasts the benefits of agent-based design over traditional micro-service architectures. Secondly, it elaborates on the implementation of network service agents in Python Agent Development Environment (PADE), employing machine learning and deep learning algorithms for performance evaluation. Thirdly, a new scalable approach, Scalable and Efficient DevOps (SE-DO), is introduced to optimize agent performance in resource-constrained settings. Fourthly, the dissertation delves into Quality of Service (QoS) and Radio Resource …

Overview Of Hil Co-Simulation For Very Large Distribution Systems And Power Electronic Converters With A Dc Fast Charging Ev Benchmark Study On An Ieee Test Feeder, Rosemary E. Alden, Donovin D. Lewis, Dan M. Ionel

Electrical and Computer Engineering Graduate Research

Current development towards implementation of the future smart grid includes advanced controller and power hardware-in-the-loop (CHIL/PHIL) testing of new technology. The impact of new loads, distributed energy resources (DER) equipment, and controls spans two fields, both electric distribution power systems modeling, typically completed in the phasor domain, and electromagnetic transient (EMT) analysis across the frequency domain. The co-simulation of distribution power systems and power electronic converter controls is a growing field of research for improved design using real-time HIL capability. Within this paper, over fifty references are reviewed to summarize the current state of HIL technology, specifically with co-simulation in …

The Role Of Feedback Within Scrum For Engineering Department Operations, Massood Towhidnejad, Omar Ochoa, James J. Pembridge, Radu Babiceanu

Posters

The Scrum framework is built on the principles of inspection and adaptation. Feedback drives the inspection process, and the team adapts based on that feedback to optimize its performance and outcomes. Within engineering departments, Scrum requires departments to examine how and when feedback is obtained to ensure that the department is remaining agile. This poster illustrates the role of feedback within two Scrum teams, one focused on student success and the other focused on faculty rewards and incentives. The two cases emphasize the need for continuous introspection at team and department levels.

Simulation-Based Optimization Of A Dc Microgrid: With Machine-Learning-Based Models And Hybrid Meta-Heuristic Algorithms, Tyler Van Deese

Theses and Dissertations

The field of economic dispatch (ED) focuses on optimizing power flow in a power system to minimize costs. It has the potential to significantly enhance system effectiveness, and efficiency, and reduce operating costs. Various techniques have been employed to tackle this problem, each with its own strengths and weaknesses. One promising approach is simulation-based optimization (SBO), which allows for accurate modeling of system interactions and improved representation of expected results. However, SBO requires running numerous simulations to identify an optimal solution, and there is a possibility of not achieving the global optimum. This work aims to address these challenges using …

Optimal Allocation Of Battery Energy Storage Systems To Enhance System Performance And Reliability In Unbalanced Distribution Networks, Dong Zhang, G. M. Shafiullah, Choton K. Das, Kok W. Wong

Research outputs 2022 to 2026

The continuously increasing renewable distributed generation (DG) penetration rate significantly reduces environmental pollution and power generation cost and satisfies society’s rapid growth in electricity demand. Nevertheless, high penetration of renewable DGs, such as wind power and photovoltaics (PV), might deteriorate the system’s efficiency and reliability due to its intermittent and stochastic natures. Introducing battery energy storage systems (BESSs) to the distribution system provides a practical method to compensate for the above deficiency since it can deliver and absorb power when needed. Hence, it is important to determine the optimal allocation of BESS to achieve maximum assistance in the grid. This …

Spoken Language Processing And Modeling For Aviation Communications, Aaron Van De Brook

Doctoral Dissertations and Master's Theses

With recent advances in machine learning and deep learning technologies and the creation of larger aviation-specific corpora, applying natural language processing technologies, especially those based on transformer neural networks, to aviation communications is becoming increasingly feasible. Previous work has focused on machine learning applications to natural language processing, such as N-grams and word lattices. This thesis experiments with a process for pretraining transformer-based language models on aviation English corpora and compare the effectiveness and performance of language models transfer learned from pretrained checkpoints and those trained from their base weight initializations (trained from scratch). The results suggest that transformer language …

Modeling And Compensating Of Noise In Time-Of-Flight Sensors, Bryan Rodriguez

Electrical Engineering Theses and Dissertations

Three-dimensional (3D) sensors provide the ability to perform contactless measurements of objects and distances that are within their field of view. Unlike traditional two-dimensional (2D) cameras, which only provide RGB data about objects within a scene, 3D sensors are able to directly provide depth information for objects within a scene. Of these 3D sensing technologies, Time-of-Flight (ToF) sensors are becoming more compact which allows them to be more easily integrated with other devices and to find use in more applications. ToF sensors also provide several benefits over other 3D sensing technologies that increase the types of applications where ToF sensors …

Novel Approach To In-Situ Mocvd Oxide/Dielectric Deposition For Iii-Nitride-Based Heterojunction Field Effect Transistors, Samiul Hasan

Theses and Dissertations

III-Nitride-based compound semiconductors have unique properties such as high bandgap and high breakdown field, which make them attractive for a variety of applications, including high-power and high-frequency electronics and optoelectronics. The most common types of III-Nitride-based field effect transistors (FETs) are aluminum gallium nitride (AlGaN)/gallium nitride (GaN) based, which suffer from some inherent problems such as virtual gate effect, current collapse, gate leakage, etc. The solution to this problem can be the inclusion of a dielectric passivation layer under the gate. However, the addition of the dielectric layer impacts one of the most critical device-controlling parameters, “threshold voltage”, which suffers …

Probabilistic Cable Aging Diagnosis And Prognosis With Reflectometry And Capacitance Methods, Xuan Wang

Theses and Dissertations

Safe and reliable operation of power plants and power transmission are critical to economy and society. Cables in power generation and transmission are subject to various thermal, chemical, and mechanical stresses, which generally lead to aging and degradation of cable insulation. It is reported that some cables with a projected lifetime of 40 years need to be replaced in 10-15 years. Poorly maintained aged cables can adversely affect power delivery and lead to catastrophic events, such as blackout, fires, and loss of lives. The current research on cable is mainly focused on the detection and localization of hard faults, which …

Deep-Learning-Based Classification Of Digitally Modulated Signals, John A. Snoap

Electrical & Computer Engineering Theses & Dissertations

This dissertation presents several novel deep-learning (DL)-based approaches for classifying digitally modulated signals, one method of which involves the use of capsule networks (CAPs) together with cyclic cumulant (CC) features of the signals. These were blindly estimated using cyclostationary signal processing (CSP) and were then input into the CAP for training and classification. The classification performance and the generalization abilities of the proposed approach were tested using two distinct datasets that contained the same types of digitally modulated signals but had distinct generation parameters. The results showed that the classification of digitally modulated signals using CAPs and CCs proposed in …

On The Prediction Of The Mechanical Properties Of Limestone Calcined Clay Cement: A Random Forest Approach Tailored To Cement Chemistry, Taihao Han, Bryan K. Aylas-Paredes, Jie Huang, Ashutosh Goel, Narayanan Neithalath, Aditya Kumar

Materials Science and Engineering Faculty Research & Creative Works

Limestone calcined clay cement (LC3) is a sustainable alternative to ordinary Portland cement, capable of reducing the binder's carbon footprint by 40% while satisfying all key performance metrics. The inherent compositional heterogeneity in select components of LC3, combined with their convoluted chemical interactions, poses challenges to conventional analytical models when predicting mechanical properties. Although some studies have employed machine learning (ML) to predict the mechanical properties of LC3, many have overlooked the pivotal role of feature selection. Proper feature selection not only refines and simplifies the structure of ML models but also enhances these models' prediction performance and interpretability. This …

Framework For Implementing Advanced Radar Plotting Aid Capability For Small Maritime Vessels, Jason Stark Harris

Electrical & Computer Engineering Theses & Dissertations

Every year in the United States many people are killed or injured when maritime vessels collide with other vessels or fixed objects. According to the United States Coast Guard, the top contributing factors to these collisions are operator inattention, operator inexperience and an improper lookout. Larger commercial vessels are required to have RADAR systems which support Automatic RADAR Plotting Aid (ARPA) which can automatically detect collisions and alert an operator to change course. These systems can be very expensive which put them out of reach of the average recreational boater. It is however possible to implement a low cost ARPA …