Digital Commons Network^™

Monolithic Silicon Opto-Electro-Mechanical Light Modulator, Ching-Horng Wu

Theses

A Fabry-Perot light beam modulator of the reflection-type has been designed with process and performance parameters optimized. This design takes advantage of the economies of surface micromaching using silicon substrates and selected thin films. High performance with a low drive voltage are achieved using electrostatic actuation of a thin polysilicon diaphragm. The diaphragm is a novel corrugated structure which has maximum compliance and maintains planarity during actuation. In addition, the corrugationsuspension used provides an improved linearity of amplitude modulation response as a function of the actuation voltage.

A preliminary version of this device has been fabricated through a contract foundry …

A Systolic Simulation And Transformation System, Ronald I. Greenberg, H.-C. Oh

Computer Science: Faculty Publications and Other Works

This paper presents a CAD tool, SystSim, to ease the design of systolic systems. Given a high-level, functional description of processors, and a high-level description of their interconnection, SystSim will perform simulations and provide graphical output. SystSim will also perform transformations such as retiming, which eases use of the methodology of Leiserson and Saxe of designing a system with broadcasting and then obtaining a systolic system through retiming.

Minimizing Channel Density With Movable Terminals, Ronald I. Greenberg, Jau-Der Shih

Computer Science: Faculty Publications and Other Works

We give algorithms to minimize density for channels with terminals that are movable subject to certain constraints. The main cases considered are channels with linear order constraints, channels with linear order constraints and separation constraints, channels with movable modules containing fixed terminals, and channels with movable modules and terminals. In each case, previous results for running time and space are improved by a factor of L/lg n and L , respectively, where L is the channel length and n is the number of terminals.

Terrain Classification In Sar Images Using Principal Components Analysis And Neural Networks, Mahmood R. Azimi-Sadjadi, Saleem Ghaloum, R. Zoughi

Electrical and Computer Engineering Faculty Research & Creative Works

The development of a neural network-based classifier for classifying three distinct scenes (urban, park and water) from several polarized SAR images of San Francisco Bay area is discussed. The principal component (PC) scheme or Karhunen-Loeve (KL) transform is used to extract the salient features of the input data, and to reduce the dimensionality of the feature space prior to the application to the neural networks. Employing PC scheme along with polarized images used in this study, led to substantial improvements in the classification rates when compared with previous studies. When a combined polarization architecture is used the classification rate for …

Self-Referenced Speckle Holography (Srsh) Image Reconstruction Performance, John R. Devey

Theses and Dissertations

The Speckle Holography technique uses a series of short exposure images and associated wave front sensor measurements to reconstruct astronomical images. The reconstruction technique effectively boosts the amplitude of high spatial frequencies to allow for finer resolution of astronomical objects. A simulation package that calculates the optical transfer function (OTF) of a telescopic system was previously developed for the Phillips Laboratory. This software was modified slightly to provide the Speckle Holography system transfer function (STF) for a telescopic system under varying seeing conditions.

Frequency Domain Speech Compression Using The Karhunen-Loeve Transform, Donald W. Dryley

Theses and Dissertations

The purpose of this study was test the influence of phase on the quality of speech reproduced by a speaker dependent compression system. The tests consisted of compressing frequency domain speech vectors using the Karhunen-Loeve Transform, with and without phase, then making subjective judgements as to the reproduced quality. Error Metrics were then tested for their suitability as predictors of reproduced quality. The compression software transformed each speech vector into a vector of complex Fourier coefficients (only half of the coefficients are needed as transform is hermitian). Phase was preserved by using the real frequency components to form one vector …

Exact Modeling Of Time-Interval-Modulated Switched Networks, Weihe Niu

Dissertations and Theses

The frequency response analysis of switched networks plays a very important part in designing various kinds of power converter circuits. In this thesis two frequency response techniques for analyzing switching power converters are discussed. One method provides a mathematical description which treats the converter as a periodic time varying system. A linearized small signal model is subsequently derived. The major part of the thesis concentrates on this accurate exact small-signal technique. The derivation involves state space representation and the use of the time varying transfer function. A Fourier analysis is performed to show the relationship between the frequency response of …

Using Spreadsheets To Teach Problem Solving In A First Year Class, A. John Boye, P. F. Williams, Rodney J. Soukup

P. F. (Paul Frazer) Williams Publications

The “problem solving” portion of a two semester first year electrical engineering course is described. This course makes use of personal computers and spreadsheets to try to improve students’ problem solving skills. The goal is to give students a better understanding of engineering concepts and not just mathematical details. In addition to describing the course contents, a brief review of the rationale that was used in selecting the hardware and software used in the course is also given.

Investigation Of The Consumer Electronics Bus, Jaesoo Yang

Dissertations

The objectives of this dissertation are to investigate the performance of the Consumer Electronics Bus (CEBus) and to develop a theoretical formulation of the Carrier Sense Multiple Access with Contention Detection and Contention Resolution (CSMA/CDCR) with three priority classes protocol utilized by the CEBus

A new priority channel assigned multiple access with embedded priority resolution (PAMA/PR) theoretical model is formulated. It incorporates the main features of the CEBus with three priority classes. The analytical results for throughput and delay obtained by this formulation were compared to simulation experiments. A close agreement has been found thus validated both theory and simulation …

On Adaptive Censored Cfar Detection, Loizos Anastasiou Prastitis

Dissertations

In an automatic radar detection system the received signal in every range resolution cell is compared with a threshold to test for the presence of a target. A Neyman-Pearson type test is used which maximizes the probability of detection for a fixed probability of false alarm. For the simple case where the noise is homogeneous a fixed threshold is chosen to achieve the designed constant false alarm rate (CFAR). In the more realistic case the noise background is non-stationary due to clutter and interference. In this situation, the threshold used for testing a particular cell is usually set adaptively using …

Timed Petri Net Simulation Of Flexible Manufacturing Systems, Yan Chen

Theses

Standard Petri nets have been used to model and analyze Flexible Manufacturing Systems. The timed Petri net, which can incorporate the time delay associated with manufacturing events, provides additional information about real time behavior of practical systems. The Timed Petri Net Simulation Tool, a highly interactive graphical tool, is applied to simulate the modeled flexible manufacturing systems. Timed Petri net models are experimented with. Machine utilization data and throughput are obtained. Analysis of the results shows that the system performance can be optimized by choosing proper parameters.

Optical Flow Determination And Motion Analysis, Qian Wang

Theses

Optical flow, also known as image flow, is of fundamental importance in the processing of image sequences. Various approaches to determine optical flow have been proposed --- others continue to appear. Using several sets of real image sequences, here, the results of three different approaches to the the determination of optical flow are reported, the approaches are the Gradient-based approach, the Correlation-based approach and the Correlation-feedback approach. The comparisons are primarily empirical, and they show that the performance of these different algorithms differs significantly among the different image sequences, indicating that there does not exists one superior algorithm which could …

An Improved Human Gait Model Incorporating The Effects Of Muscle Activity And Joint Friction, Tae Ho Choi

Theses

In designing an artificial leg for an amputee, it is important to find those underlying principles which determine the normal human gait. For this purpose we have developed a model of human walking, in which it is possible to predict an optimal gait at any given speed of walking based on the principle of minimum mechanical energy consumption.

Our model is an extension of the model proposed by Mochon and McMahon (1980). Their model assumes that during the swing phase of walking mechanical energy is conserved. Non-conservative forces due to muscle activity are assumed to occur during the double support …

Microwave Gaas Mesfet Nonlinearity And Large-Signal Modeling, Yan He

Theses

The nonlinearity analysis for a 0.5μm gate length microwave GaAs metal-semiconductor field-effect transistor (MESFET) by HP85150B Microwave Design System was investigated. The analysis starts with the construction of a large-signal MESFET equivalent circuit model. This model consists of bias dependent elements that were extracted by the optimization of DC and small-signal S-parameter measurement data. The details on this construction procedure are included in this work. The MESFET third-order intermodulation distortion was then simulated by HP85150B Microwave Design System. Reasonable agreement was obtained between simulation and measurement results. Microwave GaAs MESFET nonlinearity principles and large-signal modeling technique review are also presented. …

Modal Control Of Flexible Beam Using Smart Mateirals, Sujata Mallepalle

Theses

In this work, the dynamics and control aspects of a vibrating flexible beam using modal analysis are studied. To damp the vibrations of the system, the vibrations of each mode has to he controlled, which can he done if we know the individual mode shape. and the resonance frequency. These quantities can be derived mathematically or measured experimentally with a spectrum analyzer. Individual modal velocities can be computed by integration of the product of beam velocity and the mode shape, over the interval of beam length. The integration is carried out using numerical methods. The necessary discrete ordinates are obtained …

Performance Analysis Of Pyramid Mapping Algorithms For The Hypercube, Jing-Chiou Liou

Theses

Comparative performance analysis of algorithms that map pyramids and multilevel structures onto the hypercube are presented. The pyramid structure is appropriate for low-level and intermediate-level computer vision algorithms. It is not only efficient for the support of both local and global operations but also capable of supporting the implementation of multilevel solvers. Nevertheless, pyramids lack the capability of efficient implementation of the majority of scientific algorithms and their cost may become unacceptably high. On a different horizon, hypercube machines have widely been used in the field of parallel computing due to their small diameter, high degree of fault tolerance, and …

Reduction Of Acoustic Feedback Oscillations By Use Of Spectrum Shifting, Youssef Abdelilah

Theses

The problem of whistling noise or self-oscillation in public address systems operating in closed halls or rooms can be very disturbing to the listeners. This noise is sustained when the positive acoustic feedback, of the public address-room system, meets the oscillation criteria. This feedback system results from the acoustic sound signal reflected off the room walls and any other obstacles in the room, originating from the public address speakers and then re-entering the microphone.

When all of the audio signal components entering the public address system are shifted by a frequency increment Δf of 6 Hz, an increase of 5 …

Studies Of Wet Thermal Oxidation Of Silicon And Porous Silicon, Nilesh A. Gharia

Theses

Wet Thermal Oxidation of Silicon in VLSI is an extremely important step in the formation of field oxides. Understanding oxidation kinetics is critical for process reproducibility. The present study aims at gaining an insight into the oxidation kinetics through large experimental data at process temperatures of 800°C, 900°C, 1000°C and 1100°C with a bubbler temperature of 98°C. Oxides with thicknesses ranging from 100A to 7000A have been grown. Rate constants are obtained for the growth kinetics. Extensive characterization studies have been performed on MOS structures produced after wet oxidation.

In addition, porous silicon which assumes a growing significance in the …

Optimizing Energy Usage In A Solar-Powered Vehicle, William R. Macneil

Opportunities for Undergraduate Research Experience Program (OURE)

The University of Missouri - Rolla (UMR) will be entering SUNRAYCE '93 and the World Solar Challenge and expects to excel in these solar-powered car races. Some of the factors involved in winning a race include efficiency, reliability, and high power. All of these are important considerations, but will be ineffective unless appropriately harnessed by a power management scheme appropriate to a race strategy. The power management scheme will be used to efficiently and effectively distribute available power to the car's systems throughout a race day. My goal was to produce a software framework into which the specifications and performance …

The Anatomy Of Programming Languages, Alice E. Fischer, Frances S. Grodzinsky

Electrical & Computer Engineering and Computer Science Book Series

The specific goals of this book are to help students learn: *To reason clearly about programming languages. *To develop principles of communication so that we can evaluate the wisdom and utility of the decisions made in the process of language design. *To break down language into its major components, and each component in to small pieces so that we can focus on competing alternatives. *To define a consistent and general set of terms for the components out of which programming languages are built, and the concepts on which they are based. * To use these terms to describe existing languages, …

Measuring And Compensating For Transport Delay In Real-Time Interactive Driving Simulation, Joseph D. Dumas Ii

Retrospective Theses and Dissertations

Real-time, man-in-the-loop simulators are important tools for operator training as well as human performance research. Simulator implementation using digital computers offers many important advantages but may also cause problems. One of the most significant and troublesome artifacts of digital computer simulation is the presence of transport delays in the operator/vehicle control loop. Transport delays have been shown to destabilize the system, resulting in poorer control of the simulated vehicle. They may also contribute to an increased likelihood of simulator sickness in human operators. Therefore, it is desirable to be able to quantify simulator transport delays and to compensate the system …

Paschen's Law For A Hollow Cathode Discharge, H. Eichhorn, K. H. Schoenbach, T. Tessnow

Bioelectrics Publications

An expression for the breakdown voltage of a one‐dimensional hollow cathode discharge has been derived. The breakdown condition which corresponds to Paschen’s law contains, in addition to the first Townsend coefficient, and the secondary electron emission coefficient two parameters which characterize the reflecting action of the electric field and the lifetime of the electrons in the discharge. The breakdown voltage for a hollow cathode discharge in helium was calculated and compared to that of a glow discharge operating under similar conditions.

A Magnetic Suspension System With A Large Angular Range, Colin P. Britcher, Mehran Ghofrani

Mechanical & Aerospace Engineering Faculty Publications

In order to explore and develop technology required for the magnetic suspension of objects over large ranges of orientation, a small-scale laboratory system, the large-angle magnetic suspension test fixture (LAMSTF) has been constructed at NASA Langley Research Center. This apparatus falls into the category of large-gap, actively stabilized magnetic levitation systems. The hardware comprises five conventional electromagnets in a circular arrangement, each driven from a separate bipolar power amplifier. Electromagnet currents are commanded by a digital control system, implemented on a microcomputer, which in turn derives the position and attitude of the suspended element from an infrared optical system. The …

Direct Measurements Of The Transport Of Nonequilibrium Electrons In Gold Films With Different Crystal Structures, T. Juhasz, H. E. Elsayed-Ali, G. O. Smith, C. Suárez, W. E. Bron

Electrical & Computer Engineering Faculty Publications

The transport of femtosecond-laser-excited nonequilibrium electrons across polycrystalline and single-crystalline gold films has been investigated through time-of-flight measurements. The thicknesses of the films range from 25 to 400 nm. Ballistic electrons as well as electrons interacting with other electrons and/or with the lattice have been observed. The ballistic component dominates the transport in the thinner films, whereas the interactive transport mechanism is dominant at the upper end of the thickness range. A slower effective velocity of the interactive component is observed in the polycrystalline samples, and is assumed to arise from the presence of grain boundaries. The reflection coefficient of …

Studies Of Electron-Beam Penetration And Free-Carrier Generation In Diamond Films, R. P. Joshi, K. H. Schoenbach, C. Molina, W. W. Hofer

Bioelectrics Publications

Experimental observations of the energy‐dependent electron‐beam penetration in type II‐A natural diamond are reported. The experimental data are compared with results obtained from numerical Monte Carlo simulations, and the results are in very good agreement. The results also reveal that a threshold energy of about 125 keV is necessary for complete penetration for a 35 μm sample. It is found that over the 30–180 keV range, the energy dependence of the penetration depth and total path length exhibits a power‐law relation. Monte Carlo simulations have also been performed to investigate the excess carrier‐generation profiles within diamond for a set of …

Temporal Development Of Electric Field Structures In Photoconductive Gaas Switches, K. H. Schoenbach, J. S. Kenney, F.E. Peterkin, R. J. Allen

Bioelectrics Publications

The temporal development of the electric field distribution in semi‐insulating GaAs photoconductive switches operated in the linear and lock‐on mode has been studied. The field structure was obtained by recording a change in the absorption pattern of the switch due to the Franz–Keldysh effect at a wavelength near the band edge of GaAs. In the linear mode, a high field layer develops at the cathode contact after laser activation. With increasing applied voltage, domainlike structures become visible in the anode region and the switch transits into the lock‐on state, a permanent filamentary electrical discharge. Calibration measurements show the field intensity …

A Spectral Flux Method For Solving The Boltzmann Equation, Muhammad A. Alam, Mark A. Stettler, Mark S. Lundstrom

Department of Electrical and Computer Engineering Faculty Publications

A spectral method for solving the Boltzmann equation by the scattering matrix approach is presented, The algorithm discussed can be used to simulate both bulk and device properties with arbitrary field profiles. Although the primary goal is to reduce the data storage problem of the scattering matrix approach, many of the concepts and mathematical properties developed may be useful for other traditional spectral methods as well.

Concentration‐Dependent Optical‐Absorption Coefficient In N‐Type Gaas, Gregory Benedict Lush, H. F. Macmillan, S. Asher, Michael R. Melloch, Mark S. Lundstrom

Department of Electrical and Computer Engineering Faculty Publications

The doping-dependent, near-band-edge optical-absorption coefficient CY(h v) was deduced from optical transmission measurements in n-type GaAs thin films. The selenium-doped films were grown by metalorganic chemical-vapor deposition and do ed to produce room-temperature electron concentrations from 1.3 x 10” to 3.8X 1018 cm- P . The transmission measurements covered photon energies between 1.35 and 1.7 eV and were performed on double heterostructures with the substrate removed by selective etching. The results show good qualitative agreement with previous studies and good quantitative agreement, except for the heavily doped samples. For na=3.8 X 10” cme3, a( 1.42 eV> is approximately four times …

Feature Extraction And Classification Algorithms For High Dimensional Data, Chulhee Lee, David Landgrebe

Department of Electrical and Computer Engineering Technical Reports

In this research, feature extraction and classification algorithms for high dimensional data are investigated. Developments with regard to sensors for Earth observation are moving in the direction of providing much higher dimensional multispectral imagery than is now possible. In analyzing such high dimensional data, processing time becomes an important factor. With large increases in dimensionality and the number of classes, processing time will increase significantly. To address this problem, a multistage classification scheme is proposed which reduces the processing time substantially by eliminating unlikely classes from further consideration at each stage. Several truncation criteria are developed and the relationship between …

Reliability Trend Analyses With Statistical Confidence Limits Using The Luke Reliability Trend Chart, Stephen R. Luke

Engineering Management & Systems Engineering Theses & Dissertations

In electronic systems, it is interesting to understand exactly how the reliability is changing with time. Dynamic performance changes when a system passes from infant mortality stage into useful life phase and when the system passes from useful life phase into wearout phase. Dynamic performance also changes when the system is redesigned or when the system is acted on by a number of other outside forces such as a change in maintenance policy, escalation of alignment problems, or a change in training program. It is important to know when a system is changing dynamically in order to assess design, policy …