Digital Commons Network^™

Analysis And Control Of Monolithic Piezoelectric Nano-Actuator, Xuemei Sun

Dissertations

The study of the monolithic piezoelectric actuator, the dominant type of micropositioner is an attractive and challenging area, where realtime control theory and digital signal processing are effectively applied. The actuator can be applied in precision instruments and precision control, such as microscopes, medical and optics instruments because of the piezoelectric ceramic's high resolution, fast transient response, and potential low cost. However, hysteresis nonlinearity and lightly damped vibration exist in the system, which limit the actuator applications.

This work focuses on the hysteresis characteristics in time and frequency domains along with experimental and simulated results to verify the effectiveness of …

Microelectronics Process Engineering: A Non-Traditional Approach To Ms&E (Ingeniería De Procesos Microelectrónicos: Un Acercamiento No Tradicional A La Ciencia De Materiales E Ingeniería), E. Allen, Stacy H. Gleixner, G. Young, David W. Parent, Yasser Dessouky, L. Vanasupa

Faculty Publications

Materials Science and Engineering straddles the fence between engineering and science. In order to produce more work-ready undergraduates, we offer a new interdisciplinary program to educate materials engineers with a particular emphasis on microelectronics-related manufacturing. The bachelor's level curriculum in Microelectronics Process Engineering (J1ProE) is interdisciplinary, drawing from materials, chemical, electrical and industrial engineering programs and tied together with courses, internships and projects which integrate thin film processing with manufacturing control methods. Our graduates are prepared for entry level engineering jobs that require knowledge and experience in microelectronics-type fabrication and statistics applications in manufacturing engineering. They also go on to …

A Method Of Implementing The Interleaver In 3g Wireless Communication Systems For Randomization Of Burst Errors, Eric Duquette

Inquiry: The University of Arkansas Undergraduate Research Journal

In less than a year or two, third generation ( 3G) wireless communication systems will be replacing the currently existing second generation (2G) wireless systems and be used worldwide. The 3G systems will have a higher data transfer capacity, which allows for simultaneous data, voice, and video transfer (e.g., multimedia applications) while most of 2G systems only allow for low-rate data and voice transfer. The wireless communications industry has set standards for 3G, which detail various operations of the technology. It should be noted that the 3G standards outline only the different operations and not the processes for the production …

Design And Applications Of Volume Holographic Optical Elements, Steven C. Dunn

Retrospective Theses and Dissertations

Volume gratings were studied both theoretically and experimentally in order to design and analyze practical volume holographic optical elements. The diffraction of finite (Gaussian) beams by transmission gratings is investigated. A closed form solution for the off-Bragg profiles is obtained, and the distortion in the resulting profiles is analyzed. Criteria for when the finiteness of the beam has a minimal effect on the angular selectivity response are given. A model is developed to investigate the cross talk in multiplexed gratings Experimental verification in LiNb0₃ and PTR glass is demonstrated. The diffraction efficiency and output profiles of finite beams diffracted …

Cubic Hamiltonian Graphs And Generalized Knight's Tours, Siew Hui Ong

Student Works (2000-2009)

This thesis is divided into two parts, both related to hamiltonian graphs. The first part deals with 3-connected cubic bipartite planar graphs. By assuming that all 3-connected cubic bipartite planar graphs are hamiltonian, lower bounds for the number of Hamilton cycles in cubic bipartite planar graphs with given cyclic connectivity are obtained in Chapter 2. In Chapter 3, we show that Barnette's Conjecture is equivalent to the conjecture which states that for any two edges x and y on the same face of a 3-connected cubic bipartite planar hamiltonian graph, there is a Hamilton cycle passing through x and y1 …

Vhdl Implementation For Jawi Character Recognition, Mustafa Norita Adila

Student Works (2000-2009)

Kewujudan tulisan jawi sejak dahulu lagi telah menghasilkan pelbagai karya penting dalam perkembangan islam. Sebagai satu bahasa pengantara, tulisan jawi dianggap penting dalam bidang penulisan. Tidak terhad hanya kepada buku-buku, dokumen-dokumen dan manuskrip-manuskrip yang ditulis dalam tulisan jawi, malah penggunaanya amat meluas dan meliputi keseluruhan bidang. Menyedari kepentingannya, timbul minat saya untuk mengkaji dengan lebih mendalam bagaimana komputer boleh mengenali dan memahami tulisan ini tanpa menggunakan tenaga manusia berdasarkan kepada beberapa kajian yang sedia ada yang telah dijalankan oleb mereka yang pakar dalam teknologi komputer digital. Secara keseluruhan, kajian ini akan membantu memudahkan lagi pengecaman tulisan tangan jawi yang dilakukan …

Optical Coherent Communication System Using Phase Shift Keying, Syed Javaid Iqbal

Student Works (2000-2009)

This thesis presents the experimental study and design of a coherent communication system by using phase shift keying (PSK). Systems are designed by using all passive elements, which make the system very easy to operate, and less maintenance is required. All the PSK designs are based on a single light source. In this thesis there are five different types of PSK with a single light source communication systems are designed. All designs are experimentally tested in free space. The systems are • All optical two-channel PSK communication system, by using single light source, "All optical single channel, two-way PSK communication, …

Analysis And Synthesis Of Primary Side Cycle By Cycle Control Of Isolated Flyback Converters, Radoslaw Nalepa

Theses

This work presents the analysis and design of an isolated flyback converter, without feedback from the load side. The converter is controlled from the primary side using the switch voltage and innovative control circuit topologies.

A detail study of the flyback circuit is undertaken including all known parasitics. Besides the standard parasitics, for example the capacitor resistive effect, other more subtle effects are included in the model development such as inter coil couplingj source capacitance etc. Development of these models has provided information about circuit simplifications without losing accuracy of the model. As a consequence of this model development, it …

Remote Monitoring System, Chin Kee Tan

Student Works (2000-2009)

Research is conducted to analysis and evaluate about the Remote Monitoring System. The details process of developing the Remote Monitoring System will be discussed throughout whole section of this project. The primary objective of this project is to explore on how Remote Monitoring CCTV process work as well as the application area used in Remote Monitoring CCTV system. This project involves creating a real time monitoring video camera system as a prototype. The developer will perform the development of the system according to system development life cycle. Stages of the system development life cycle for developing the remote monitoring software …

Study Of Dynamics And Mechanism Of Metal-Induced Silicon Growth, Elena A. Guliants, Wayne A. Anderson

Electrical and Computer Engineering Faculty Publications

The present study addresses the mechanism of metal-induced growth of device-quality silicon thin films. Si deposition was performed by magnetron sputtering on a 25-nm-thick Ni prelayer at 525–625 °C and yielded a continuous, highly crystalline film with a columnar structure. A Ni disilicide intermediate layer formed as a result of the Ni reaction with Si deposit provides a sufficient site for the Si epitaxial growth because lattice mismatch is small between the two materials. The reaction between Ni and Si was observed to progress in several stages. The NixSiy phase evolution in a Ni:Si layer was studied by x-ray photoelectron …

Resonant Energy Transfer From Argon Dimers To Atomic Oxygen In Microhollow Cathode Discharges, M. Moselhy, R. H. Stark, K. H. Schoenbach, U. Kogelschatz

Bioelectrics Publications

The emission of atomic oxygen lines at 130.2 and 130.5 nm from a microhollow cathode discharge in argon with oxygen added indicates resonant energy transfer from argon dimers to oxygen atoms. The internal efficiency of the vacuum-ultraviolet (VUV) radiation was measured as 0.7% for a discharge in 1100 Torr argon with 0.1% oxygen added. The direct current VUV point source operates at voltages below 300 V and at current levels of milliamperes.

Self-Consistent Simulations Of Electroporation Dynamics In Biological Cells Subjected To Ultrashort Electrical Pulses, R. P. Joshi, Q. Hu, R. Aly, K. H. Schoenbach, H. P. Hjalmarson

Bioelectrics Publications

The temporal dynamics of electroporation of cells subjected to ultrashort voltage pulses are studied based on a coupled scheme involving the Laplace, Nernst-Plank, and Smoluchowski equations. A pore radius dependent energy barrier for ionic transport, accounts for cellular variations. It is shown that a finite time delay exists in pore formation, and leads to a transient overshoot of the transmembrane potential V_mem beyond 1.0 V. Pore resealing is shown to consist of an initial fast process, a 10⁻⁴s delay, followed by a much slower closing at a time constant of about 10 ⁻¹s. This establishes a …

Isolated Ramp Metering Feedback Control Utilizing Mixed Sensitivity For Desired Mainline Density And The Ramp Queues, Pushkin Kachroo, Kaan Ozbay, Donald E. Grove

Electrical & Computer Engineering Faculty Research

This paper presents a feedback control design for isolated ramp metering control. This feedback control design, unlike the existing isolated feedback ramp controllers, also takes into account the ramp queue length. Using a nonlinear H∞ control design methodology, we formulate the problem in the desired setting to be able to utilize the results of the methodology.

Modeling, Fabrication, And Optimization Of Niobium Cavities: Phase I, Robert A. Schill Jr., Mohamed Trabia

Transmutation Sciences Materials (TRP)

Niobium cavities are important parts of the integrated NC/SC high-power linacs. Over the years, researchers in several countries have tested various cavity shapes. They concluded that elliptically shaped cells and buffered chemical polishing produce good performance. The objective of the proposed research is to maximize the performance of the niobium cavities through studying multipacting, studying the effect of chemical etching on the surface roughness, and redesigning the cavities.

The US Congress has recently authorized exploring an alternative way to deal with spent nuclear fuel: Accelerator Transmuting of Waste (ATW). In this approach, a particle accelerator produces protons that react with …

Comparison Of Two B-Polynomial Methods: Application To The Identification Of Time Delayed Processes, Ruiyao Gao, Aidan O'Dwyer

Conference papers

An extensive literature exists on the estimation of the model parameters of time delayed processes. The objective of this paper is to review the main B-polynomial approaches to the delay estimation problem. More specifically, two algorithms are discussed and compared theoretically and in simulation. The algorithms involve various procedures to assess how the model relates to the observed data, to a priori knowledge, and to the algorithms’ intended use. Simulation results indicate that both the algorithms can suitably identify the model parameters, including the time delay. This paper also discusses advantages and disadvantages of the methods and gives some guidelines …

Combining Multiple Representations For Pen-Based Handwritten Digit Recognition, Fevzi̇ Ali̇moğlu, Ethem Alpaydin

Turkish Journal of Electrical Engineering and Computer Sciences

We investigate techniques to combine multiple representations of a handwritten digit to increase classification accuracy without significantly increasing system complexity or recognition time. In pen-based recognition, the input is the dynamic movement of the pentip over the pressure sensitive tablet. There is also the image formed as a result of this movement. On a real-world database of handwritten digits containing more than 11,000 handwritten digits, we notice that the two multi-layer perceptron (MLP) based classifiers using these representations make errors on different patterns implying that a suitable combination of the two would lead to higher accuracy. We implement and compare …

Meta-Genetic Programming: Co-Evolving The Operators Of Variation, Bruce Edmonds

Turkish Journal of Electrical Engineering and Computer Sciences

The standard Genetic Programming approach is augmented by co-evolving the genetic operators. To do this the operators are coded as trees of indefinite length. In order for this technique to work, the language that the operators are defined in must be such that it preserves the variation in the base population. This technique can varied by adding further populations of operators and changing which populations act as operators for others, including itself, thus to provide a framework for a whole set of augmented GP techniques. The technique is tested on the parity problem. The pros and cons of the technique …

Fuzzy Modeling Approach For Integrated Assessments Using Cultural Theory, Adnan Yazici, Fred E. Petry, Curt Pendergraft

Turkish Journal of Electrical Engineering and Computer Sciences

It has already been noted that the accurate prediction of societal responses requires the use of a formal model based on some social or cultural taxonomy. One such taxonomic candidate is Cultural Theory (CT). CT argues that all societies, irrespective of time or place, are informed by their underlying worldviews, which must be more or less Hierarchic, more or less Individualistic, more or less Egalitarian, and more or less Fatalistic. This approach appears to have a potential for cross-temporal and spatial comparisons that makes it a particularly attractive instrument for a study of the human dimensions of global climate change. …

An Integrated Design-Object Modeling Environment -- Pluggable Metamodel Mechanism --, Masaharu Yoshioka, Takayuki Sekiya, Tetsuo Tomiyama

Turkish Journal of Electrical Engineering and Computer Sciences

We propose a new integrated computational environment to support design object modeling, during engineering design process that requires a variety of design object models, such as a geometric model, a control model, and a finite element model. To integrate multiple design object models, we have developed a mechanism called a metamodel mechanism that maintains consistency among various models. The metamodel mechanism represents relationships among concepts used in these models and is useful, for example, to conduct concurrent engineering practices. In this framework, we formalize a design process as operations to the metamodel. This paper expands the concept of the metamodel …

Bag Distributed Real-Time Operating System And Task Migration, Beki̇r Tevfi̇k Akgün

Turkish Journal of Electrical Engineering and Computer Sciences

BAG is a distributed operating system designed for real-time applications which is run on a distributed real-time system. The heterogeneously distributed BAG system consists of nodes which have VME-bus chassis, different types of processor modules, and an interconnection network. The operating system has three main parts having distributed properties: task migration, load balancing and a distributed file system. Heterogeneous task migration is based on the extended finite state machine (EFSM) programming model. The EFMS model has also eased the implementation of the migration mechanism. The load balancing algorithm is centralized in one node. But the overall system will be a …

All-Optical Networking, Altan Koçyi̇ği̇t, Demeter Gökişik, Semi̇h Bi̇lgen

Turkish Journal of Electrical Engineering and Computer Sciences

A survey of recent literature on all optical networking is presented. Starting from multiplexing techniques and topological features, network design and performance issues are reviewed. Particular attention is devoted to Wavelength Division Multiplexing (WDM) networks. Static and dynamic solutions of the routing and wavelength assignment (RWA) problem are considered. Issues of current research are summarized.

Avalanche And Bit Independence Properties For The Ensembles Of Randomly Chosen N \Times N S-Boxes, Işil Vergi̇li̇, Melek D. Yücel

Turkish Journal of Electrical Engineering and Computer Sciences

Cryptographic test methods such as avalanche, strict avalanche and bit independence criteria, which measure the degree of security of the s-boxes of substitution-permutation networks, are applied to randomly generated ensembles of ( n \times n \) s-boxes. Statistical analysis of experimental data directs the work towards defining ``relative errors'' and examining the avalanche and strict avalanche criteria within ``relative error ranges''. Histograms of relative errors in each ensemble are evaluated, and combining the results of different ensembles corresponding to different values of the s-box size, variations of maximum relative errors versus the size of the s-box are depicted. Some predictions …

Performance Evaluation Of Safer K-64 And S-Boxes Of The Safer Family, Ekrem Aras, Melek D. Yücel

Turkish Journal of Electrical Engineering and Computer Sciences

If the characteristics of s-boxes of the SAFER family of ciphers are examined for the criteria of strict avalanche, bit independence, and XOR table distribution, experiments show that the ``exponentiating'' s-box has a weakness for an input difference of 128 (=10000000_{2}) and the ``logarithm-taking'' s-box has a weakness for an input difference of 253 (=11111101_{2}). However, since these experiments are performed by isolating the s-boxes from the general structure, they do not necessarily indicate a weakness in the overall algorithm. We propose a quick and rough test method, called the avalanche weight distribution criterion, to evaluate the overall performance of …

A More Efficient Design And Implementation Of Cal Programs In Natural Science Using Object-Oriented Technology, Jurgen Friedrich

Turkish Journal of Electrical Engineering and Computer Sciences

With the amount and complexity of science topics and applications increasing, the need for appropriate and effective science education is constantly growing. Computer-based education is very promising to help both teachers and learners in their difficult task, which involves complex psychological processes. This complexity is reflected in high demands on the design and implementation methods used to create computer-assisted learning (CAL) programs. Due to their concepts, flexibility, maintainability and extended library resources, object-oriented technology (OOT) is very suitable to producing this type of pedagogical tool. The introduced approach is demonstrated by a basketball simulation program for instruction in Newtonian mechanics …

Ota-C Based Proportional-Integral-Derivative (Pid) Controller And Calculating Optimum Parameter Tolerances, Cevat Erdal, Ali̇ Toker, Cevdet Acar

Turkish Journal of Electrical Engineering and Computer Sciences

Proportional-integral-derivative (PID) controllers are one of the most important control elements used in the process control industry. In practice, operational amplifiers are generally used in analog controllers. On the other hand, the operational transconductance amplifiers recently developed, which have some positive properties compared to operational amplifiers, are not used in analog controller design at present. Furthermore, the optimum parameter tolerances for the proposed PID circuit by the use of parameter sensitivities are determined. These tolerances keep the relative error at the output of the controller due to parameter variations in the tolerance region.

Time-Domain Electric-Field Integral Equation With Central Finite Difference, Baek Ho Jung, Tapan Kumar Sarkar

Electrical Engineering and Computer Science - All Scholarship

In this paper, we present a new formulation using the time-domain electric-field integral equation (TD-EFIE) to obtain a transient scattering response from arbitrarily shaped conducting bodies. The time derivative of the magnetic vector potential is approximated with a central finite difference, and the scalar potential is time averaged by dividing it into two terms. This approach with an implicit method using central-difference results in accurate and stable transient scattering responses from conducting objects. Detailed mathematical steps are included, and several numerical results are presented.

Stm And Electrochemical Investigation Of Homoepitaxial Boron-Doped Cvd Diamond Films, John B. Cooper, Jason A. Moulton, Sacharia Albin, Bing Xiao

Chemistry & Biochemistry Faculty Publications

Homoepitaxial growth of boron-doped CVD diamond films was carried out on (100) and (111) oriented substrates. Atomic resolution images were obtained for both (100) and (111) surfaces using scanning tunneling microscopy. STM images reveal the presence of a 2x1-monohydride reconstruction for the untreated (100) surface and a lxl reconstruction for the untreated (111) surface. No other atomically resolved reconstructions were observed under a wide range of growth conditions. Non-aqueous electrochemical investigations were carried out on the films exhibiting atomically resolved reconstructions. Evidence for potential-induced surface-reconstruction and surface chemical modification of the (100) 2xl-monohydride surface has been observed.

Advances In Computer And Information Sciences: From Abacus To Holonic Agents, Tuncer Ören

Turkish Journal of Electrical Engineering and Computer Sciences

The shift of paradigm emphasizing the importance of the ability to process knowledge rather then being knowledgeable is stressed. A taxonomy of knowledge processing tools, machines, or systems is offered. Major possibilities for future achievements that the author would like to underline are listed with emphasis on agent technology, agent-directed simulation, holonic agents, holonic-agent simulation, and contribution of system theories for cognitive abilities such as understanding, learning, adaptation, and anticipation in computerization.

The Problem Of A Viscoelastic Cylinder Rolling On A Rigid Half-Space, John Murrough Golden, G.A.C. Graham

Articles

The problem of a viscoelastic cylinder rolling on a rigid base, propelled by a line force acting at its centre, is solved in the noninertial approximation. The method used is based on a decomposition of hereditary integrals developed by the authors in previous work, and on the viscoelastic Kolosov-Muskhelishvili equations which are used to generate a Hilbert problem. In this formulation, the problem reduces to a nonsingular integral equation in space and time, which simplifies under steady-state conditions and for exponential decay materials, to algebraic form. There are also two subsidiary conditions.

In the case of a standard linear model, …

Fingerprint Recognition Using Neural Networks, Eng Hoe Kennie Yeoh

Student Works (2000-2009)

Traditional methods of fingerprint verification uses either complicated feature detection algorithms that are not specific to each fingerprint, or compare two fingerprint images directly using image processing toots. The former involves very complicated calculations and tedious algorithms, and the latter tend to work poorly. In this paper it is described a new method which takes the middle ground. This paper studies the implementation of the Fast Fourier Transform and Artificial Neural Networks into the recognition of fingerprints. With tests conducted on the implementation of the Fourier Transform as a method of fingerprint feature extraction, the use of the Fourier Transform …