Digital Commons Network^™

Distributed Sensor Network For Civil Infrastructure Health Monitoring, Jose Humberto Mata Hernandez

Masters Theses

"This thesis focuses on the development of a robust, low power consumption and cost effective wireless data acquisition, system to be used for civil infrastructure health monitoring. The complete solution that has been developed for this application integrates micro-electromechanical sensing elements (e.g. PVDF sensor); a wireless data acquisition system based on a Bluetooth-enabled radio, a microcontroller with analog to digital conversion capabilities, a power source including a solar cell array for long term operation, and a weatherproof enclosure for on-site installation. The complementary part of the solution is a weatherproof On-site Remote Access Point (ORAP) which collects, stores, and transmits …

Methods Of Cutting Profiles With Sharp Curvature In Co2 Laser Cutting, Pau Loong Chu

Student Works (2000-2009)

The main objective of this project is to develop a sharp curvature cutting algorithm and integrate into a CO2 Laser Cutting (2D CAD/CAM) program. The existing 8-tube FAF CW CO2 laser system developed· at the University of Malaya together with an existing XY control table is utilized to study the cutting of sharp curvature profiles. A CO2 laser cutting program with user-friendly graphical user interface is developed using Visual Basic 6 and MINT programming language via MINT Interface Library to drive the controller card and hence the motor. A Rounded Comer cutting algorithm is developed which blends an arc motion …

Characterization Of Polished Silicon Wafer, Rajan Subramaniam

Student Works (2000-2009)

The quality of polished silicon wafer in terms of flatness, sub-surface damages, lifetime of minority carriers and micro-roughness are part of the key parameters in characterization used in the wafer manufacturing industry today. Prior to polishing, wafers were usually etched to minimize mechanical damages from earlier processes such as slicing and lapping. Two etching methods namely 'Concave' and 'Convex' etching were compared. Their effects on the quality parameters of the wafers as described above were determined through flatness measurement using microscanning, subsurface measurement using OSDA and minority lifetime measurement using EL YMAT. Determination of particles and microroughness on the wafer …

Design Of A Tem-Cell With Increased Usable Test Area, Kresimir Malaric, Juraj Bartolic

Turkish Journal of Electrical Engineering and Computer Sciences

Transversal electromagnetic mode cells (TEM-cells) are used for electromagnetic compatibility measurements (emission and immunity), and for biomedical applications. Over the years, higher and higher frequencies are being used, which demands smaller transmission structures in order to obtain the homogeneous field distribution due to resonance. Such resonance destroys the TEM field, introducing higher order modes. The goal was to design the TEM-cell for GSM frequencies that will have a larger area with a homogeneous field used for testing, while still obtaining the characteristic impedance. Commercial TEM-cells used for frequencies of 900 MHz have only 2 cm in height available for testing, …

New Modified Smith Predictor Designs, Pauline Sourdille, Aidan O'Dwyer

Conference papers

By combining several existing modified Smith predictor structures, presented in a literature review, a generalised form of the Smith predictor is proposed. From this structure, excellent servo and regulator responses can be obtained by specifying three controller dynamic elements. Two new modified Smith predictor structures are presented with their associated tuning rules. The results of the simulations indicate that the two new designs give better overall responses than the original Smith predictor.

Comparison Of Process Identification Techniques In The Time And Frequency Domains, Tony Kealy, Aidan O'Dwyer

Conference papers

This paper describes ten methods to identify a mathematical model for a real process with a time delay. The process is the Process Trainer, PT326 from Feedback Instruments Limited. Six of the methods use step response data and one of the methods uses impulse response data for identification. Two of the methods use frequency response data and the final method uses information from relay-based experiments. The best results are obtained using a combined analytical and gradient method [6] in the frequency-domain and, in the time-domain, using the two-point algorithm [1] and a method proposed by Suganda et al. [5].

Analytical Ise Calculation And Optimum Control System Design, Tony Kealy, Aidan O'Dwyer

Conference papers

In control system theory, a performance index is a quantitative measure of the performance of a system and is chosen so that emphasis is given to the important system parameters. In this paper, the authors demonstrate two methods to determine analytically the ISE performance index value for a FOPDT process model under PI control. The ability of proportional/integral (PI) and proportional/integral/derivative (PID) controllers to compensate most practical industrial processes has led to their wide acceptance in industrial applications. The most direct way to set up PI/PID controller parameters is the use of tuning rules. The second part of this paper …

Blind Fault Detection Using Spectral Signatures, Pallavi Chethan

LSU Master's Theses

This work studies a blind fault detection method, which only analyses a system's output signal for any change in the characteristics from pre-fault to post-fault to identify the occurrence of faults. In our case the fault considered to develop the procedure is change in time constant of an aircraft's aileron-actuator system and its simplified version - a position servo system. The method is studied as an alternative to conventional fault detection and identification methods. The output signal is passed through a filter bank to enhance the effect of a fault. The Short time Fourier transform is performed on the enhanced …

Transmission Of Electromagnetic Power Through A Biological Medium, Ripan Das

LSU Master's Theses

Primary goal of this work is to study transmission of EM power through a multilayered biological medium. For a particular case study, EM power transmission from an external transmitter to a coupled receiver implanted inside a biological medium simulating a human body is studied to find solutions for factors such as optimum transmission frequency and excitation current. Different aspects of interaction of EM waves with biological bodies and tissues are discussed. Two major factors that may affect transmission of EM power through a biological body are absorption and reflection of EM waves. A simulation in which exact Maxwell's equations are …

Orthogonal Frequency Division Multiplexing Modulation And Inter-Carrier Interference Cancellation, Yao Xiao

LSU Master's Theses

The Orthogonal Frequency Division Multiplexing (OFDM) technique, wireless channel models, and a pair of new intercarrier interference self-cancellation methods are investigated in this thesis. The first chapter addresses the history of OFDM, along with its principles and applications. Chapter two consists of three parts: the principal, the modern OFDM models, and the Peak to Average Power Ratio (PAPR) problem. Chapter two also summarizes possible PAPR solutions. Chapter three discusses a series of well-known wireless channel models, as well as the general formula for wireless channels. In Chapter four, ICI problem has been discussed, along with its existing solutions. Chapter five …

Design Of Power Efficient Multicast Algorithms For Sparse Split Wdm Networks, Kavitha Devi Buddharaju

LSU Master's Theses

Recent years witnessed tremendous increase in data traffic as new Internet applications were launched. Optical networks employing recent technologies such as DWDM and EDFA`s emerged as the most prominent and most promising solutions in terms of their ability to keep with the demand on bandwidth. However for a class of applications bandwidth is not the only important requirement, These applications require efficient multicast operations. They include data bases, audio/video conferencing, distributed computing etc. Multicasting in the optical domain however has its own unique set of problems. First, an optical signal can be split among the outputs of a node but …

Denoising Techniques - A Comparison, Sarita Veera Dangeti

LSU Master's Theses

Visual information transmitted in the form of digital images is becoming a major method of communication in the modern age, but the image obtained after transmission is often corrupted with noise. The received image needs processing before it can be used in applications. Image denoising involves the manipulation of the image data to produce a visually high quality image. This thesis reviews the existing denoising algorithms, such as filtering approach, wavelet based approach, and multifractal approach, and performs their comparative study. Different noise models including additive and multiplicative types are used. They include Gaussian noise, salt and pepper noise, speckle …

Modeling Intracranial Fluid Flows And Volumes During Traumatic Brain Injury To Better Understand Pressure Dynamics, Wayne W. Wakeland, James Mcnames, Mateo Aboy, D. Hollemon, Brahm Goldstein

Complex Systems Faculty Publications and Presentations

See additional files below for the Presentation.

We describe a computer model of intracranial pressure (ICP) dynamics that evaluates clinical treatment options for elevated ICP during traumatic brain injury (TBI). The model uses fluid volumes as primary state variables and explicitly models fluid flows as well as the resistance, compliance, and pressure associated with each intra - and extracranial compartment (arteries and arterioles, capillary bed, veins, venous sinus, ventricles, and brain parenchyma). The model evaluates clinical events and therapies such as intra - and extra-parenchymal hemorrhage, cerebral edema, cerebrospinal fluid drainage, mannitol administration, head elevation, and mild hyperventilation. The model …

How To Establish Successful Cooperative Student Learning Centers For Stem Courses, Ronald James Bieniek, Douglas R. Carroll, Cesar Mendoza, Oran Allan Pringle, Ekkehard Sinn, Kai-Tak Wan, Donald C. Wunsch

Physics Faculty Research & Creative Works

Students learn more if they are actively involved in the learning process, particularly in a cooperative manner. Several UMR faculty have operated course-based learning centers (LCs) as part of the campus-wide Learning Enhancement Across Disciplines (LEAD) Program of student learning assistance and enhancement. LCs are designed to assist large numbers of students in a cost- and time-efficient manner that promotes student engagement without requiring undue amounts of faculty time. Course instructors spend time in the open learning environment of the LC, in lieu of office hours, guiding students to master course material and skills in their evolution from novice to …

Protocols For Disease Classification From Mass Spectrometry Data, Michael Wagner, Dayanand Naik, Alex Pothen

Mathematics & Statistics Faculty Publications

We report our results in classifying protein matrix-assisted laser desorption/ionizationtime of flight mass spectra obtained from serum samples into diseased and healthy groups. We discuss in detail five of the steps in preprocessing the mass spectral data for biomarker discovery, as well as our criterion for choosing a small set of peaks for classifying the samples. Cross-validation studies with four selected proteins yielded misclassification rates in the 10-15% range for all the classification methods. Three of these proteins or protein fragments are down-regulated and one up-regulated in lung cancer, the disease under consideration in this data set. When cross-validation studies …

Quantum Mechanical Analysis Of Channel Access Geometry And Series Resistance In Nanoscale Transistors, R. Venugopal, S. Goasguen, Supriyo Datta, Mark S. Lundstrom

Department of Electrical and Computer Engineering Faculty Publications

We apply a two-dimensional quantum mechanical simulation scheme to study the effect of channel access geometries on device performance. This simulation scheme solves the nonequilibrium Green’s function equations self-consistently with Poisson’s equation and treats the effect of scattering using a simple approximation inspired by Büttiker. It is based on an expansion of the device Hamiltonian in coupled mode space. Simulation results are used to highlight quantum effects and discuss the importance of scattering when examining the transport properties of nanoscale transistors with differing channel access geometries. Additionally, an efficient domain decomposition scheme for evaluating the performance of nanoscale transistors is …

Iddq Testing Of A Cmos 10-Bit Charge Scaling Digital-To-Analog Converter, Srinivas Rao Aluri

LSU Master's Theses

This work presents an effective built-in current sensor (BICS), which has a very small impact on the performance of the circuit under test (CUT). The proposed BICS works in two-modes the normal mode and the test mode. In the normal mode the BICS is isolated from the CUT due to which there is no performance degradation of the CUT. In the testing mode, our BICS detects the abnormal current caused by permanent manufacturing defects. Further more our BICS can also distinguish the type of defect induced (Gate-source short, source-drain short and drain-gate short). Our BICS requires neither an external voltage …

Kalman Filtering For Adaptive Nonuniformity Correction In Infrared Focal-Plane Arrays, Sergio N. Torres, Majeed M. Hayat

Electrical and Computer Engineering Faculty Research and Publications

A novel statistical approach is undertaken for the adaptive estimation of the gain and bias nonuniformity in infrared focal-plane array sensors from scene data. The gain and the bias of each detector are regarded as random state variables modeled by a discrete-time Gauss–Markov process. The proposed Gauss–Markov framework provides a mechanism for capturing the slow and random drift in the fixed-pattern noise as the operational conditions of the sensor vary in time. With a temporal stochastic model for each detector’s gain and bias at hand, a Kalman filter is derived that uses scene data, comprising the detector’s readout values sampled …

Network Traffic Properties Of Bimodal Multicast Protocol, Öznur Özkasap, Mi̇ne Çağlar

Turkish Journal of Electrical Engineering and Computer Sciences

The popularity of large-scale distributed applications, such as videoconferencing, multimedia dissemination, electronic stock exchange and distributed cooperative work, has grown with the availability of high-speed networks and the expansion of the Internet. The key property of this type of applications is the need to distribute data among multiple participants together with an application-specific quality of service needs. This fact makes scalable multicast protocols an essential underlying communication structure. Although there exist several studies investigating the traffic characteristics of unicast communication, multicast traffic has not been examined extensively in previous studies. It is well known that the aggregate traffic properties of …

Zero-Crossing Based Demodulation Of Minimum Shift Keying, Mi̇ne Kalkan, Feza Keresteci̇oğlu

Turkish Journal of Electrical Engineering and Computer Sciences

Minimum shift keying (MSK) modulation has features such as constant envelope, compact spectrum and good error performance, which are all desirable in many digital applications including mobile radio. Numerous receiver structures to demodulate MSK have been suggested, such as correlation receivers, differential detectors and frequency discriminators. MSK is a form of biphase keying and can be detected by a zero-crossing based phase demodulator which gives near optimum performance. In this paper, the bit error performance of a zero-crossing based coherent MSK demodulator is theoretically investigated and a closed-form expression for the bit error rate is derived. The results indicate that …

Music, Cbf And Differential Algebraic Constant Modulus Algorithms For Direction Of Arrival Estimation In Passive Coherent Locators, Ahmet Özçeti̇n

Turkish Journal of Electrical Engineering and Computer Sciences

In passive coherent locators (PCL) systems, noise and the precision of direction of arrival (DOA) estimation are key issues. This paper addresses the implementation of high-resolution DOA estimation methods, in particular the multiple signal classification (MUSIC) algorithm, the conventional beam forming (CBF) algorithm, and the algebraic constant modulus algorithm (ACMA). The goal is to compare the ACMA to the MUSIC and CBF algorithms for application to PCL. The results and analysis presented here support the use of constant modulus information, where available, as an important addition to DOA estimation. The ACMA offers many simple solutions to noise and separation related …

Design Of Optimal Equalizers And Precoders For Mimo Channels, Lijuan Li

LSU Doctoral Dissertations

Channel equalization has been extensively studied as a method of combating ISI and ICI for high speed MIMO data communication systems. This dissertation focuses on optimal channel equalization in the presence of non-white observation noises with unknown PSD but bounded power-norm. A worst-case approach to optimal design of channel equalizers leads to an equivalent optimal H-infinity filtering problem for the MIMO communication systems. An explicit design algorithm is derived which not only achieves the zero-forcing (ZF) condition, but also minimizes the RMS error between the transmitted symbols and the received symbols. The second part of this dissertation investigates the design …

Adaptive Baseband Predistortion For Rf Power Amplifier Linearization., Laura Faus-Ferrer

Theses

In order to make use of spectrally efficient linear modulation methods for mobile communications, it is necessary to linearise the underlying RF power amplifier (PA). A number of techniques for linearizing a PA have been studied, focusing on the Adaptive Baseband Predistortion. The work is centred on the research concentrates on the analysis of different algorithms, their simulation using MatLab, and implementation of a predistorter as a subsystem of a prototype Cartesian based transmitter.

The thesis describes the typical architecture of a transceiver with an emphasis on the nonlinear analysis. Cavers’ algorithm has been examined in terms of its computational …

Multiple Model Control With Intelligent Switching To Ensure Robustness To Process Variations., Peter Cunningham

Theses

One of the most popular approaches for dealing with process that undergo large variations with time, of late, is the multiple model approach. This method has considerable intuitive appeal and has received widespread dissemination in academia. Numerous successful simulations have been reported although few real-time results have been published. The principal contribution of this thesis is the application of the multiple model control scheme in real-time.

A number of practical concepts that enable the use of multiple model control in real-time are discussed. Many of these issues arose when the multiple model control scheme was applied to a laboratory scale …

Modern Control Techniques For Induction Machines In High-Performance Adjustable-Speed Drives, Pat Cronin

Theses

Induction Motors (IM’s) are increasingly being considered for and used in high-performance motor drive (HPMD) systems. Their application has only gained acceptance since the 1970’s with the advent of vector control, microprocessors and improvements in power converter technology. D.C. motors were traditionally the preferred choice in HPMD systems. The main reasons for IM acceptance in HPMD systems are ruggedness, durability, low maintenance, cost, and small size by comparison with D.C. motors.

Alternating current asynchronous motors of the IM type are considered to be the universal workhorses of the manufacturing industry. It has been estimated that they are used in seventy …

Dynamically Biased Radio Frequency Power Amplifier, Tom Twomey

Theses

With the current trend in mobile communications towards more complex modulation schemes to enhance spectral efficiency, the design of RF power amplifiers is the subject of considerable interest and research. The newer more spectrally efficient modulation schemes require a much higher level of linearity due to the non-constant level of their signal envelope. A variable envelope signal would in non-linear amplifiers lead to unacceptable levels of distortion. Linear amplifiers solve this problem at the cost of significant loss of efficiency. With the evolution towards more spectrally efficient modulation schemes, the trade off between linearity and power efficiency has become more …

On Stability Of Affine Blending Systems, Ruiyao Gao, Aidan O'Dwyer, Seamus Mcloone, Eugene Dermot Coyle Professor

Conference papers

This paper presents a novel approach to stability analysis of affine blending systems. The analysis is based on Quadratic Lyapunov functions. The approach considers the nonlinear offset term in affine blending systems as non-vanishing perturbations added to the corresponding nominal linear blending systems. The affine blending systems will be bounded if the corresponding linear blending system is exponentially stable. The bound is determined by an ultimate limit, which is proportional to the maximum of the offset terms of each affine system.

An Outline And Further Development Of Smith Predictor Based Methods For The Compensation Of Processes With Time Delay, Pauline Sourdille, Aidan O'Dwyer

Conference papers

An extensive literature review is presented and a new modified Smith predictor is subsequently presented.

System Identification Using Higher Order Spectra, Aidan O'Dwyer

Conference papers

This communication will explore the use of particular types of frequency domain concepts, labelled higher order spectra, to help determine the frequency response of a process. This will allow the identification of the parameters of a single input, single output (SISO) model for a process (which includes a time delay), in both open loop and closed loop environments.

Device Structure Effects On Electrical Crosstalk In Backwall Illuminated Cmos Compatible Photodiode Arrays, Paul Vernon Jansz

Theses : Honours

This research has made a comparative investigated of crosstalk in backside illuminated and frontside illuminated single junction photodiode and vertical double junction photodiode CMOS compatible pixels, using a commercial 2D device simulation package, SEMICAD DEVICE (1994). Comparison of pixel total, electron and hole quantum efficiency response and Absorption Volume data is undertaken. This is so that the underlying carrier drift-diffusion dynamics responsible for optimal pixel response resolution may be qualitatively understood, allowing prediction of even more optimal photodiode pixel configurations. The effect of varying the double junction and single junction photodiode pixel's geometry on response resolution is considered. Only for …