Digital Commons Network^™

A Concept Of Controlling Grover Diffusion Operator: A New Approach To Solve Arbitrary Boolean-Based Problems, Ali Al-Bayaty, Marek A. Perkowski

Electrical and Computer Engineering Faculty Publications and Presentations

A controlled-diffusion operator for Boolean oracles is designed as a new approach for Grover’s algorithm to search for solutions for arbitrary logical structures of such oracles, since the Grover diffusion operator is not able to find correct solutions for some logical structures of Boolean oracles. We also show that the Phase oracles do not work sometimes correctly using the Grover diffusion operator. Our proposed controlled-diffusion operator relies on the states of output qubit, as the reflection of Boolean decisions from a Boolean oracle without relying on the phase kickback. We prove that on many examples of Boolean and Phase oracles …

Long-Distance Photon-Mediated And Short-Distance Entangling Gates In Three-Qubit Quantum Dot Spin Systems, Nooshin M. Estakhri, Ada Warren, Sophia E. Economou, Edwin Barnes

Engineering Faculty Articles and Research

Superconducting resonator couplers will likely become an essential component in modular semiconductor quantum dot (QD) spin qubit processors, as they help alleviate crosstalk and wiring issues as the number of qubits increases. Here, we focus on a three-qubit system composed of two modules: a two-electron triple QD resonator coupled to a single-electron double QD. Using a combination of analytical techniques and numerical results, we derive an effective Hamiltonian that describes the three-qubit logical subspace and show that it accurately captures the dynamics of the system. We examine the performance of short-range and long-range entangling gates, revealing the effect of a …

Experimentally Validated Dynamic Equivalent Circuit Model Of Perovskite Solar Cells: Utilizing Machine Learning Algorithms For Parameter Extraction Using I-V And C-V Characteristics, Zahraa Ismail, Eman Sawires, Fathy Amer, Sameh O. Abdellatif

Electrical Engineering

No abstract provided.

M3t-Lm: A Multi-Modal Multi-Task Learning Model For Jointly Predicting Patient Length Of Stay And Mortality, Junde Chen, Qing Li, Feng Liu, Yuxin Wen

Engineering Faculty Articles and Research

Ensuring accurate predictions of inpatient length of stay (LoS) and mortality rates is essential for enhancing hospital service efficiency, particularly in light of the constraints posed by limited healthcare resources. Integrative analysis of heterogeneous clinic record data from different sources can hold great promise for improving the prognosis and diagnosis level of LoS and mortality. Currently, most existing studies solely focus on single data modality or tend to single-task learning, i.e., training LoS and mortality tasks separately. This limits the utilization of available multi-modal data and prevents the sharing of feature representations that could capture correlations between different tasks, ultimately …

Study Of The Synthesis Mechanism And Some Properties Of Oligomers Based On Epichlorohydrin And Diphenylguanidine, Rovshan Israilovich Ismailov, Normuhamad Edgarov, Alisher Israilovich Ismailov

Technical science and innovation

In this work, the synthesis and the scheme for obtaining an oligomer based on epiiodhydrin with diphenylguanidine were studied, the proportions of epiiodhydrin in the initial mixture, the yield of oligomers, and the reduced viscosity were studied. The results of spectroscopic and elemental analyzes are obtained, which show that changes in the ratio of monomers have almost no effect on the iodine content in the oligomer. This is apparently due to the fact that epiiodhydrin is much more active in reactions than amino compounds. By studying the degree of conversion on the viscosity of the oligomerization products, the effects on …

Development Of A Universal Humidity Converter At Ultra High Frequency, Hulkar Asadullayevna Usmonova, Asadulla Turgunbayev

Technical science and innovation

The article proposes the and principle of operation of a universal primary measuring transducer of humidity at an ultra-high frequency with reciprocating motion along the vertical axis of rotation, which allows increasing the information redundancy of the primary measuring transducer (the influence of inhomogeneities, including humidity in the composition of the material, on the measurement result is averaged). The design of the primary measuring transducer under consideration provides for correction of the moisture measurement result by the mass (density) of the material, which will make it possible to carry out measurements without preliminary weighing the sample. The obtained results of …

Possibility Of Applying Methods Of Analysis And Synthesis Of Linear Electrical Circuits To Some Nonlinear Circuits, Qudrat Gayratovich Abidov, Anvar Ismatullaevich Rahmatullaev, Mexrnoz Odiljonovna Gafurova

Technical science and innovation

This article discusses the possibility of applying the analysis and calculation methods used in linear electric circuits to certain nonlinear circuits. It is shown that if we abandon the quantitative criteria for the analysis and synthesis of nonlinear circuits using linear principles, some problems in nonlinear electrical engineering can be correctly solved based on linear theory. As an example, the simplest ferroresonant voltage stabilizer is considered, using the method of superposition and the equivalence of ferroresonant circuits in series and parallel connections. The electrical diagram is shown, and a formula for the stabilization coefficient is derived, representing a complex nonlinear …

Analysis Of The Drives Of Pumping Stations In The Southern Part Of The Angren Coal Mine Of Uzbekugol Jsc, Shukhrat Badretdinovich Umarov, Murakam Mirzakhmatovich Mirsaidov, Islombek A’Lobekovich Abdullabekov, Saidamirkhon Hayrullakhon O‘G‘Li Oripov

Technical science and innovation

This article presents the results of a comprehensive analysis of the operation of pumping station drives in the southern part of the Angren coal mine of Uzbekugol JSC. The modes of operation and designs of pumps of various types are considered, including СPSH 850-240, D320-50, D1200-125 and GR170-30. The study covers the performance characteristics of these pumps, as well as their adaptation to the specific conditions of the coal mine. Special attention is paid to the impact of climate change on the operating modes of pumping units. Changes in the amount and intensity of precipitation, as well as fluctuations in …

Algorithm Of Adaptive Cyclic Control Of Position-Trajectory Moving Objects (In The Case Of An Industrial Robot Manipulator), Zaripov Oripjon Olimovich, Sevinova Dildora Usmonovna

Technical science and innovation

This article is devoted to the adaptive cyclic control of an industrial robot manipulator on the example of moving objects with a positional trajectory. The specific features of applying the principle of adaptive cyclic control to industrial robots are also presented. The kinematic scheme describing the movement of the robot working body with the adaptive cycle control system and the transition states of the working body based on limited positions in space are presented, the sequence of movement of the manipulator links and the selection of information about the actions at individual levels of mobility, control in the case of …

Predictive Residual Neural Networks For Optical Trapping Of Small Particles, Nasim Mohammadi Estrakhri, Ponthea Zahraii, Saman Kashanchi, Nooshin M. Estakhri

Engineering Faculty Articles and Research

Optical tweezers provide a non-contact method to trap, move, and manipulate micro- and nano-sized objects. Using properly designed dielectric and plasmonic nanostructure configurations, optical tweezers have been tailored to create stable and precise trapping for nanoscale objects. Recent advances in numerical optimization techniques allow further enhancement in nanoscale optical traps through inverse optimization of such configurations. One of the main challenges in such optimization approaches is the time-consuming nature of full-wave simulation of nanostructures and postprocessing steps to extract optical forces. To address this challenge, we introduce a surrogate solver based on residual neural networks that can accurately predict the …

Impulse, Fall 2024, Jill Fier, Micayla Standish, Jerome J. Lohr College Of Engineering

Impulse (Jerome J. Lohr College of Engineering Publication)

2 | Math Teacher Counts Her Blessings
3 | New Roles for Burckhard
4 | Three New Department Heads
6 | New Faculty and Staff
8 | Taking Engineering on The Road
10 | Dennis Helder Named Distinguished Alum
12 | Mccomish Endowment Making an Impact
14 | Innovate Sodak Supports Local Projects
16 | R1 the SDSU Way
18 | Nation’s Top Civil Engineering Student Chapter
22 | Hunter Wallster Setting Records
24 | Jenna Currier: When Passion Meets Talent
28 | Student Teams Compete
30 | RASC-AL Team Overcomes Setback
32 | Break the Ice Team Comes Home …

Analysis And Design Of Synchronous Machines With Reluctance Rotor And Pm Stator Combined Excitation, Oluwaseun A. Badewa, Dan M. Ionel

Electrical and Computer Engineering Graduate Research

This paper studies motors that are part of a general class of synchronous machines with stator-only excitation including those that may be referred to in recent literature as of the flux switching, variable flux reluctance, or hybrid excitation type. In the studied example machine, the active stator has circumferentially magnetized spoke-type PMs and concentrated toroidal coils for improved slot fill and shortened end turns. A systematic analysis of the mmf produced by the toroidal coils in the stator and open-circuit airgap flux is developed to define feasible polarities of this synchronous motor and to establish that the dominant pole pair …

Two-Level Design Optimization Of Ac Machines With Dc Stator Excitation And Minimal Torque Ripple Using Reluctance Rotor Profile Shaping, Ali Mohammadi, Oluwaseun A. Badewa, Yaser Chulaee, Dan M. Ionel

Electrical and Computer Engineering Graduate Research

Torque ripple mitigation in electric machines is important for a smooth and stable operation, minimize mechanical vibrations, and enhance the overall performance. In this paper, a novel two-level optimization method is proposed for the design of synchronous flux-switching and hybrid excitation machines with an innovative multi-point spline shaping method to minimize the torque ripple. This study uses models that are validated by experimental tests from a prototype with similar topology, and exemplifies the aforementioned optimization process on a 28 pole machine. The analysis results indicate that the torque ripple can be substantially reduced with improved electromagnetic torque of the electric …

Measurement Automation & Measurement System Research Endowment, Brian Bivinetto, Beneda Loya, Shiron Bendrihem

College of Engineering Summer Undergraduate Research Program

Road travel safety is always the most important issue in transportation systems. In general, several factors cause road accidents, such as human error, vehicle mechanical failure, roadway limitations (e.g. pavement, lane geometry, etc.), and inclement weather conditions. The major focus of today’s transportation developments is related to making highway transportation safer, smarter, and greener to enhance livability. Many accidents are caused when drivers lack a better understanding of the surrounding traffic conditions because the driver not only needs to control his/her vehicle but also needs to be aware of the movements of the vehicles around him/her. A driver cannot be …

Assessing The Impact Of Femur Morphological Variations On Pediatric Hip Joint Biomechanics Using Statistical Shape Modeling, Tamara Chambers

Doctoral Dissertations and Master's Theses

This dissertation aimed to (1) quantify morphological variations in the pediatric hip joint and (2) evaluate the sensitivity of an infant musculoskeletal model (MSM) to these variations, considering hip joint center estimation errors. A shape statistical model (SSM) of decedent infant femurs from the Ortolani collection was created using ShapeWorks, capturing key morphological features, such as variations in the femoral neck-shaft and anteversion angles. Seven synthetic femurs were generated from the SSM to create SSM-informed MSMs, which were systematically evaluated through kinematics and kinetics analyses in OpenSim. Incorporating the SSM led to slight changes in the pediatric MSMs’ kinematics but …

Gratings In Optical Waveguides And Lasers, Weida Zhang

Electrical Engineering Theses and Dissertations

Gratings play a crucial role in Distributed Bragg reflector (DBR) lasers, influencing their performance and characteristics. The focus of this work is aimed at the design of DBR lasers that significantly impact the laser's spectral and temporal behavior, making it a key component in optimizing DBR laser functionality.

The SMU developed grating software, compared with commercially available photonics software, has improved accuracy and much smaller computation times. The improved accuracy and reduced computation times compared with commercial photonics software occur because commercial software is typically based on numerical methods such as finite-difference time-domain (FDTD), eigenmode expansion and beam propagation methods …

Bht-Qaoa: The Generalization Of Quantum Approximate Optimization Algorithm To Solve Arbitrary Boolean Problems As Hamiltonians, Ali Al-Bayaty, Marek Perkowski

Electrical and Computer Engineering Faculty Publications and Presentations

A new methodology is introduced to solve classical Boolean problems as Hamiltonians, using the quantum approximate optimization algorithm (QAOA). This methodology is termed the “Boolean-Hamiltonians Transform for QAOA” (BHT-QAOA). Because a great deal of research and studies are mainly focused on solving combinatorial optimization problems using QAOA, the BHTQAOA adds an additional capability to QAOA to find all optimized approximated solutions for Boolean problems, by transforming such problems from Boolean oracles (in different structures) into Phase oracles, and then into the Hamiltonians of QAOA. From such a transformation, we noticed that the total utilized numbers of qubits and quantum gates …

Production Box Cost Estimating Relationships For Dod Avionics, Carla J. Cisneros, Edward D. White, Brandon M. Lucas, Jonathan D. Ritschel, Robert D. Fass, Shawn M. Valentine

Faculty Publications

The authors use historical information obtained from the Cost Assessment Data Enterprise to estimate recurring production unit cost for DoD avionics via cost estimating relationships (CERs). The specific modeled responses include mean unit cost, median unit cost, and the 100th production unit cost (T100) utilizing learning curve theory. For T100, the authors adopt both a multiplicative and an additive error for CER comparison. Recommended CERs consist of the mean unit cost and the T100 utilizing a multiplicative error. Moreover, results reveal that weight has a significant effect on cost as well as a potential underaccounting of real price change or …

Real-Time Synthesis Of A Nonuniformly Correlated, Partially Coherent Beam Using An Optical Coordinate Tansformation, Milo W. Hyde Iv

Faculty Publications

We design, build, and validate an optical system for generating light beams with complex spatial coherence properties in real time. Beams of this type self-focus and are resistant to turbulence degradation, making them potentially useful in applications such as optical communications. We begin with a general theoretical analysis of our proposed design. Our approach starts by generating a Schell-model (uniformly correlated or shift-invariant) source by spatially filtering incoherent light. We then pass this light through an optical coordinate transformer, which converts the Schell-model source into a nonuniformly correlated field. After the general analysis, we discuss system engineering, including trade-offs among …

Thermal Management For Optimal Performance Of Unitized Regenerative Fuel Cells, Mythy T. Tran

Mechanical & Aerospace Engineering Theses & Dissertations

As the race to net zero energy intensifies around the world, hydrogen production and fuel cell technologies are attracting more attention, and the technologies are growing rapidly. Together, hydrogen production and fuel cell technologies hold potential for a reliable, green, and sustainable energy system. Hydrogen is an excellent energy carrier and can be produced from various sources, especially green and renewable sources. Fuel cells generate electricity and water from hydrogen and oxygen. In reverse mode, fuel cells operate as electrolyzers to produce hydrogen and oxygen from electricity and water. However, the major drawback that keeps hydrogen and fuel cells from …

Optical Investigation Of A Low-Pressure Plasma In A Superconducting Radio-Frequency Cavity, Zachary A. Caudell

Electrical & Computer Engineering Theses & Dissertations

The state-of-the-art cryomodules for particle accelerators use superconducting radio-frequency (SRF) cavities. It is known that accumulation of hydrocarbon impurities reduces the cavity surface work function, decreasing cryomodule performance metrics such as field emission, thermal stability, and accelerating gradients. An in-situ method of plasma processing has recently been developed to clean the cavities and restore cryomodule performance [1]. This study is to understand the properties of the low-pressure plasmas generated in a C100 SRF cavity and ultimately to improve the performance of plasma surface cleaning using optical emission spectroscopy. Using a 500 mm focal length Czerny-Turner monochromator coupled with a photomultiplier …

Design Of An Above Pavement Wireless Sensor Node (Apwsn) For Real-Time Roadway Monitoring Using Piezoelectric Energy-Harvesting, Jochy Jonathan Perez

Theses and Dissertations

The evolution of Smart Highway and Internet of Things (IoT) technologies offers new opportunities to improve the safety and efficiency of vehicular traffic on roads. This research effort describes the development of a wireless pavement sensor that provides a novel method to detect key pavement parameters while incorporating low-power energy harvesting that leverages the kinetic energy generated by vehicular traffic. The Above Pavement Wireless Sensor Node (APWSN) is the embodiment of the approach. APWSN can facilitate the strategic deployment of sensors on a wide variety of roads to enable real-time data collection to support decision-making processes for road infrastructure maintenance …

Zhong-Qun Tian, Academician And Honorary Member Of Electrochemistry Committee Chinese Chemical Society, Achieved "Raman Lifetime Award", Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Optimization Of Channel Structure Of Alkaline Water Electrolyzer By Using An Expanded Mesh As A Bipolar Plate, Hai-Yan Xiong, Zhen-Xiao Zhu, Xin Gao, Chen-Ming Fan, Hui-Bao Luan, Bing Li

Journal of Electrochemistry

Alkaline water electrolysis (AWE) is the most mature technology for hydrogen production by water electrolysis. Alkaline water electrolyzer consists of multiple electrolysis cells, and a single cell consists of a diaphragm, electrodes, bipolar plates and end plates, etc. The existing industrial bipolar plate channel is concave-convex structure, which is manufactured by complicated and high-cost mold punching. This structure still results in uneven electrolyte flow and low current density in the electrolytic cell, further increasing in energy consumption and cost of AWE. Thereby, in this article, the electrochemical and flow model is firstly constructed, based on the existing industrial concave and …

Chinese Chemical Society: First Young Scholars' Symposium On Electrosynthesis Held Successfully, Chinese Society Of Electrochemistry (Cse)

Journal of Electrochemistry

No abstract provided.

2024 Tianmulake Advanced Anode Materials Innovation Forum And Sixth National Conference Of Advanced Battery Failure Analysis And Testing Technology Concluded Successfully, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Electronic Communication Between Co And Ru Sites Decorated On Nitrogen-Doped Carbon Nanotubes Boost The Alkaline Hydrogen Evolution Reaction, Meng-Ting Gao, Ying Wei, Xue-Meng Hu, Wenj-Jie Zhu, Qing-Qing Liu, Jin-Yuan Qiang, Wan-Wan Liu, Ying Wang, Xu Li, Jian-Feng Huang, Yong-Qiang Feng

Journal of Electrochemistry

Designing highly efficient Pt-free electrocatalysts with low overpotential for an alkaline hydrogen evolution reaction (HER) remains a significant challenge. Here, a novel and efficient cobalt (Co), ruthenium (Ru) bimetallic electrocatalyst composed of CoRu nanoalloy decorated on the N-doped carbon nanotubes (CoRu@N-CNTs), was prepared by reacting fullerenol with melamine via hydrothermal treatment and followed by pyrolysis. Benefiting from the electronic communication between Co and Ru sites, the as-obtained CoRu@N-CNTs catalyst exhibited superior electrocatalytic HER activity. To deliver a current density of 10 mA·cm^–2, it required an overpotential of merely 19 mV along with a Tafel slope of 26.19 mV·dec …

Aging Characteristics Of Lithium-Ion Battery Under Fast Charging Based On Electrochemical-Thermal-Mechanical Coupling Model, Dong-Xu Zuo, Pei-Chao Li

Journal of Electrochemistry

The aging characteristics of lithium-ion battery (LIB) under fast charging is investigated based on an electrochemical-thermal-mechanical (ETM) coupling model. Firstly, the ETM coupling model is established by COMSOL Multiphysics. Subsequently, a long cycle test was conducted to explore the aging characteristics of LIB. Specifically, the effects of charging (C) rate and cycle number on battery aging are analyzed in terms of nonuniform distribution of solid electrolyte interface (SEI), SEI formation, thermal stability and stress characteristics. The results indicate that the increases in C rate and cycling led to an increase in the degree of nonuniform distribution of SEI, and thus …

Power Quality Enhancement In Hybrid Pv-Bes System Based On Ann-Mppt, Heli̇n Bozkurt, Özgür Çeli̇k, Ahmet Teke

Turkish Journal of Electrical Engineering and Computer Sciences

Battery energy systems (BESs) assisted photovoltaic (PV) plants are among the popular hybrid power systems in terms of energy efficiency, energy management, uninterrupted power supply, grid-connected and off-grid availability. The primary objective of this study is to enhance the power quality of a grid-tied PV-BES hybrid system by developing an operation strategy based on Artificial Neural Network (ANN) based maximum power point tracking (MPPT) method. A test system comprising a 10-kWh BES and a 12.4 kW PV plant is structured and simulated on the MATLAB/Simulink platform. The hybrid system is validated with three different cases: constant radiation, rapid changing radiation, …

Mention Detection In Turkish Coreference Resolution, Şeni̇z Demi̇r, Hani̇fi̇ İbrahi̇m Akdağ

Turkish Journal of Electrical Engineering and Computer Sciences

A crucial step in understanding natural language is detecting mentions that refer to real-world entities in a text and correctly identifying their boundaries. Mention detection is commonly considered a preprocessing step in coreference resolution which is shown to be helpful in several language processing applications such as machine translation and text summarization. Despite recent efforts on Turkish coreference resolution, no standalone neural solution to mention detection has been proposed yet. In this article, we present two models designed for detecting Turkish mentions by using feed-forward neural networks. Both models extract all spans up to a fixed length from input text …