Digital Commons Network^™

Performance Enhancement Of Ev Drive System Under Open-Phase Fault Using Reinforcement Learning With Mpc, Ahmed M. Hassan, Mohammed E. Metwally Dr.

Journal of Engineering Research

Improving the operation of electric vehicles (EVs) under fault is a very important subject because it increases their ability to operate in case of an emergency. This paper proposes a fault-tolerant control methodology for an EV drive system under open phase fault (OPF). The 5-ph interior permanent magnet synchronous motor (IPMSM) is employed in the drive system because it has several merits, such as high efficiency and reliability. The proposed technique is based on utilizing a reinforcement learning (RL) control algorithm, based twin-delayed deep deterministic policy gradient (TD3) algorithm, to operate the motor at maximum torque per ampere under OPF. …

Grades Are Bugs, Jordan Freitas

Computer Science Faculty Works

This paper argues that grades are bugs in our educational system, undermining desired behaviors and outcomes. Grades were introduced into higher education for purposes directly at odds with the goals of inclusive pedagogy today, as well as the neuroscience of human motivation and learning. Students enter computer science programs from increasingly varied backgrounds and experiences, and face a rapidly evolving landscape of prospective career paths while higher education costs in the United States are ever increasing. Computer science educators have a responsibility to adapt and carefully re-examine typical approaches to all aspects of the learning environments we build and curricula …

Grid Fragility, Blackouts, And Control Co-Design Solutions, Mario Garcia-Sanz

Faculty Scholarship

The grid is undergoing a large-scale transformation, including a significant reduction of synchronous generators, a high penetration of inverter-based resources and renewables, substantial demand growth, new extra-large loads, aging infrastructure and a concerning vulnerability to contingencies. Some of the recent massive blackouts in Spain/Portugal, Chile and Texas are exposing the fragility of the grid as we know it today. This paper introduces new solutions to stabilize the grid under undesired dynamic interactions and extreme contingencies, with the goal of avoiding cascading failures and blackouts. Using control co-design methodologies, the paper proposes three interdependent categories to improve the reliability and controllability …

The Evolution Of Global Gold And Copper Trade Networks, Oleksandr Hulianskyi

Northeast Journal of Complex Systems (NEJCS)

Gold and copper have emerged as two of the most vital commodities in global trade. Despite serving distinct purposes, their international trade networks reveal interconnected patterns, critical to understanding the dynamics of global economics. This paper studies these attributes and their evolution during the last 36 years for both metals and finds correlations between them. The first part of the research is focused on the sustainability of networks through efficiency and robustness indexes; the second part is dedicated to interconnectedness – the Louvain and Bayesian SBM algorithms, partition, and modularity instruments are used. Community detection algorithms provide valuable insights into …

Replicating Associative Learning Of Rodents With A Neuromorphic Robot In An Open-Field Arena, Tianze Liu, Kang Jun Bai, Hongyu An

Michigan Tech Publications

This study emulates associative learning in rodents by using a neuromorphic robot navigating an open-field arena. The goal is to investigate how biologically inspired neural models can reproduce animal-like learning behaviors in real-world robotic systems. We constructed a neuromorphic robot by deploying computational models of spatial and sensory neurons onto a mobile platform. Different coding schemes—rate coding for vibration signals and population coding for visual signals—were implemented. The associative learning model employs 19 spiking neurons and follows Hebbian plasticity principles to associate visual cues with favorable or unfavorable locations. Our robot successfully replicated classical rodent associative learning behavior by memorizing …

How’S It Growing? Tools For Observing Snow And Sea Ice In A Changing Arctic Ocean, Ian Alexander Raphael

Dartmouth College Ph.D Dissertations

September Arctic sea ice extent has diminished by roughly 50% in the 45 years since satellite observations began. The Arctic Ocean may experience ice-free summers within the next decade, with implications for habitat, resource extraction, geopolitics, and local and global climate change. To predict how Arctic sea ice will change in the future, we need to understand its behavior in the present. In situ sea ice mass balance measurements (snow accumulation, ice growth, snow and ice surface melt, and bottom melt) are essential for studying the processes driving rapid changes in the ice pack, and for validating remote sensing measurements …

Development Of An Embedded Iot Board For Real-Time Floor Estimation Of Autonomous Robots, Carter J. Sorensen

Electronic Theses and Dissertations

As service robots become more prevalent in multi-story environments such as hospitals, hotels, and laboratories, accurate floor-level detection is critical to ensuring operational reliability. Consider a robot tasked with delivering medical samples in a multi-story laboratory. Without accurate feedback, a robot exiting on the wrong floor could introduce delays, disrupt workflows, or compromise sample integrity. Internet of Things (IoT) technologies offer a way to address these risks by providing real-time error detection and corrective capability. However, current IoT-based floor estimation systems often require invasive modifications to building infrastructure—particularly elevator control panels. These approaches introduce challenges related to cost, liability, backward …

Remote Sensing Of Seismic Signals Via Enhanced Moiré-Based Apparatus Integrated With Active Convolved Illumination, Adrian A. Moazzam, Anindya Ghoshroy, Durdu Güney, Roohollah Askari

Michigan Tech Publications

The remote sensing of seismic waves in challenging and hazardous environments, such as active volcanic regions, remains a critical yet unresolved challenge. Conventional methods, including laser Doppler interferometry, InSAR, and stereo vision, are often hindered by atmospheric turbulence or necessitate access to observation sites, significantly limiting their applicability. To overcome these constraints, this study introduces a Moiré-based apparatus augmented with active convolved illumination (ACI). The system leverages the displacement-magnifying properties of Moiré patterns to achieve high precision in detecting subtle ground movements. Additionally, ACI effectively mitigates atmospheric fluctuations, reducing the distortion and alteration of measurement signals caused by these fluctuations. …

Online Hyperparameter Tuning For Llm Optimization, Ethan Lin, Nathan Yu, Jeromy Chang

Computer Science and Engineering Senior Theses

Large Language Models (LLMs) are becoming increasingly popular in modern society. However, despite their popularity, the deployment of LLMs in real-world scenarios is extremely challenging due to substantial computational costs and memory constraints. Edge devices, like smartphones and IoT devices, lack resources needed to run these models locally, instead offloading computations for cloud computing. Cloud computing requires users to send their data over the internet leading to numerous privacy and security concerns. In some domains, such as health and finances, sending such sensitive information is not an option. Existing solutions to compress or increase inference speed include Small Language Models …

Measurement Of Moisture Levels In Oils And Lubricants Using A Novel Moisture Sensor, Aaron Swartz, Ronak Ali

Electrical and Computer Engineering Graduate Research

It is very challenging to measure moisture levels in oils. There is not a good method to measure it. Using the novel moisture sensor invented by Dr. Zhi David Chen, we tried various methods to measure the moisture levels in oils. The initial trials are to immerse the sensor chip into the oils to see any sensor reading changes with the change of moisture levels in oils. It was observed that the sensor reading was unstable even after immersion into the oil for two weeks. The idea for immersion of the sensor chip into the oils failed due to the …

Llm Music Creation And Recommendation Applications, Curtis Robinson, Allan Yang, Thomas Liu

Electrical and Computer Engineering Senior Theses

This thesis explores the application of large language models (LLMs) in music analysis, creation, and interaction, focusing on their potential to reshape traditional workflows in the music domain. The study begins by contextualizing the role of artificial intelligence in music technology, particularly emphasizing the emergence of LLMs like GPT and their unique capabilities in multimodal and musical contexts. A comprehensive survey of current research and toolsets highlights both creative and analytical implementations, ranging from text-based music generation to music information retrieval. The core contribution is an experimental framework that integrates LLMs with music processing libraries, enabling novel interactions such as …

The Grd Companion, Julius Gamboa, Muti Shuman, Tro Hovasapian

Electrical and Computer Engineering Senior Theses

This project introduces the design and development of the GRD Companion. This gesture-controlled reminder device aims to support individuals with special needs in their daily routines, in the hope of them being more independent. The system we designed integrates a Raspberry Pi Zero 2 W, PAJ7620U2 gesture sensor, and audio playback components, all housed in a custom 3D-printed case. Some of our key design priorities included accessibility by relying only on gesture recognition to control the device, eliminating screens and buttons, as well as portability, enabling all users to carry the device anywhere. The device is paired with our WaveLink …

Emg Vocal Translations, Lucas Amlicke, Raphael Kusuma, Cole Heider, Kayleigh Vu, Monica Sommer

Electrical and Computer Engineering Senior Theses

In this paper, we propose a novel augmentative and alternative communication (AAC) framework for silent speech. Many individuals with speech impairments are unable to vocalize effectively due to various conditions that affect the vocal cords. To engage in social activities, many rely on AAC devices that often lack flexibility and expressiveness. Users may still find self-expression and spontaneity difficult with such devices. This project presents a novel approach to developing a silent speech interface (SSI), providing a more adaptable and user-centered solution to give the vocally impaired a voice. Using surface electromyography (sEMG) alongside machine learning techniques, we aim to …

Santa Clara Radio Astronomy Project Iv: Data Acquisition, Nicholas Alva, Peter Lattimer

Electrical and Computer Engineering Senior Theses

Santa Clara Radio Astronomy Project (SCRAP) is a multi-year project that aims to make radio astronomy accessible to the Santa Clara University community. Previous iterations have focused on constructing and improving a parabolic radio telescope located on the balcony of the fourth floor at The Sobrato Campus for Discovery and Innovation at Santa Clara University. Until this year, the radio telescope has been stationary. As a consequence, the telescope is only capable of observing celestial objects directly above it, severely limiting the data capture area. This thesis describes the contributions of SCRAP IV Data Acquisition to the project: enabling 2D …

Ergonomic Human Robot Handovers Using Surface Electromyography (Semg) Sensors, Maya Murphy, Michael Mishkanian

Electrical and Computer Engineering Senior Theses

For decades, robots have been kept in cages in industry. With the advances of collaborative robots and Artificial Intelligence (AI), there is a shift towards humans and robots working together. In this research, we propose an ergonomically friendly collaborative robotic cell that enables a human and a collaborative robot to work synergistically to assemble a mobile robot. The collaborative robot provides the parts while explaining the process through a computer, and the human co-worker follows the instructions to complete the assembly. The proposed collaborative robotic cell is evaluated in a user study to ensure that the handovers of the parts …

Passive Radar In Metropolitan Environments (Prime), Hannah Bajakian, Carson Crisafulli, Dylan Olson

Electrical and Computer Engineering Senior Theses

Radio Detection and Ranging (radar) is a core application of RF engineering, traditionally implemented through active systems that transmit high-power signals and process their reflections to estimate target range and velocity. However, active radar systems require significant power, cost, and regulatory overhead. This thesis explores the design and implementation of a passive radar system as a low-power, cost-effective alternative for real-time aircraft tracking.

The system capitalizes on existing ultra-high frequency (UHF) television broadcast signals as illuminators of opportunity. These signals, along with their reflected signals from airborne targets, are received using Yagi-Uda directional antennas and captured using a USRP B210 …

Secure Your Hardware With Randomization And Redundancy, Dennis Cao, Joseph Khamisy, Sumeet Upadhya

Computer Science and Engineering Senior Theses

Differential Fault Analysis (DFA) is a potent hardware attack that threatens cryptographic security by injecting faults into a cipher implementation to reveal secret keys. This project aims to mitigate DFA attacks on the Advanced Encryption Standard (AES) by implementing targeted countermeasures in an embedded AES-128 encryption core. Two key techniques are explored: Randomization and Triple Modular Redundancy (TMR). The randomization approach introduces unpredictability into the encryption process, which involves inserting dummy rounds, artificial noise, and random delays, to disrupt an attacker’s timing and analysis, while TMR provides redundancy by replicating critical rounds of computation and using majority voting to correct …

Control Strategies In Wind Energy Systems: A Comprehensive Overview, Abeer Awad, Mohamed Al Hasheem

Future Engineering Journal

This paper reviews different control methods used in wind energy systems to improve how they work and connect to the power grid. It covers simple control methods like Proportional-Integral (PI) controllers, as well as more advanced ones like Sliding Mode Control and intelligent controls such as fuzzy logic and neural networks. The strengths and weaknesses of each method are discussed, focusing on how well they handle changes in wind and load, keep power quality high, and stay stable. Challenges like system complexity and unpredictable wind are also explained. The paper ends by suggesting that future work should focus on combining …

D.A.M.P.E.R.: Delay And Attenuation Modules For Propagation Emulation And Response, Matthew Guntz

Electrical and Computer Engineering Senior Theses

The DAMPER project, which stands for Delay and Attenuation Modules for Propagation Emulation and Response, is a hands-on system designed to help test how radio signals behave in the real world. When radio waves travel over long distances or through different environments, they often get weaker (attenuated) or arrive later than expected (delayed). DAMPER lets students, researchers, and engineers simulate those conditions in a lab using simple, low-voltage electronics.

Vector Extension On A Risc-V Cpu, Muhammad Ibrahim Lawai, Niels Holzmann, Khondakar Mujtaba

Electrical and Computer Engineering Senior Theses

Electricians face significant health and safety hazards when inspecting drop ceilings, including exposure to dust, asbestos, and the risk of falls. To address these challenges, this project proposes a lightweight, autonomous robot capable of inspecting drop ceilings and assisting with wire tracing tasks—thereby distancing electricians from hazardous environments. The robot employs tread-based mobility to navigate fragile ceiling panels, integrated ultrasonic sensors and bumpers for obstacle avoidance, and an antenna system to detect and follow energized wire signals. Visual feedback is provided to the operator through a real-time video feed over a secure NoMachine interface, with manual and semi-autonomous operation modes …

Open Source Arm Cortex M0 Processor, Zack Boyle

Electrical and Computer Engineering Senior Theses

Despite becoming a standard for low-power microcontrollers, the ARM Cortex- M0’s proprietary nature poses difficulties for developers looking for cost, flexibility, and transparency, especially in startup, academic, and hobbyist contexts. In order to overcome these drawbacks, this paper offers an open-source implementation of the ARM Cortex-M0 processor that is easily accessible and customizable. My design encourages development of open-source hardware while still maintaining compatibility with the vast ARM software ecosystem. Unlike other architectures, such as RISC-V, which do not have native support for ARM-based infrastructure, my technology allows for easy integration into current development processes. With this research, I hope …

Improvements To Cal Poly's Hybrid Ac/Dc House, Brandon Ng, Andrew Nguyen, Logan Tom

Electrical Engineering

This senior project details the improvements made to Cal Poly’s Hybrid AC/DC House project. The previous state of the house experienced issues with proper reading of the current power being drawn from the connected AC sources, as well as with the system’s multiple-input single-output converter, where thermal overheating of specific FETs prevented the system from reaching its maximum output power. The updates made to the AC/DC house include improved code to prevent faulty readings and display failure and a cleaned-up power monitoring board that removes noisy signals and allows for the correct power implementation to be displayed. In addition, the …

Field Deployable Mobile Manipulator For Autonomous Apple Harvesting, Gabriel K. Basus, Antonio Bowen, Andrew Daouda

Electrical Engineering

Increasing labor costs and agricultural demands have created a need for automated apple harvesting. However, automated apple harvesting via robotic manipulation must overcome certain challenges to be an effective and efficient method. First, the system must compete with or perform better than manual human labor. Second, it must safely and accurately navigate an apple orchard autonomously. Third, the robotic manipulator must be able to securely grasp and pick apples without causing damage. To address these challenges, this project utilizes a Husky UGV equipped with a 2D LiDAR sensor, an RGB-D camera, an IMU, an OpenManipulator-X robot arm, and a soft …

Reverse Engineering Bring Up And Profiling Of Multi-Fpga Systems, Henry A. Evans

Master's Theses

FPGAs have long been used for prototyping and verifying high-speed digital designs in industry and in academic research. As ASIC designs have grown in complexity and size, prototyping those designs on FPGAs has required multiple FPGAs that sometimes span multiple servers. Western Digital donated multiple FPGA-based systems to Cal Poly in 2023. These servers contain multiple high-end AMD FPGAs that are ideal for prototyping large high-speed digital designs, however the full documentation on how to use the servers and how the servers work was not provided. The servers did not come with any information on how to program the FPGAs, …

Streamlined Intelligence: Resource-Efficient Machine Learning For 5g Nr V2v Channel Equalization, Jacqueline G. Radding

Master's Theses

As autonomous vehicles continue to evolve, reliable and efficient real-time communication between vehicles is essential for safety and performance. This thesis explores Streamlined Intelligence: Resource Efficient machine learning for 5G NR V2V Channel Equalization, focusing on lightweight random forest decision tree models to address the challenges of channel equalization in 5G New Radio (NR) vehicle to vehicle (V2V) systems. Using orthogonal frequency division multiplexing (OFDM) with QPSK modulation, the study simulates data transmission in nonlinear channels characterized by obstructions, Doppler shifts, and fading. Decision trees are proposed as a computationally efficient alternative to other machine learning methods while being compared …

Coherent Synchronization For Distributed Digital Phased Arrays, Zachary C. Numa

Master's Theses

Distributed digital phased arrays are rising technologies that help enable applications such as search and rescue operations, wireless communication, radar navigation, and military operations, among many others. Due to their improved angular resolution, digital phased arrays offer superior direction-finding capabilities compared to traditional analog phased array systems. However, this improvement comes at the cost of increased complexity—specifically, the need for precise synchronization of phase, time, and frequency across physically separated nodes. Without synchronization, the distributed phased array's gain and direction-of-arrival (DoA) estimations deteriorate significantly.

There are multiple aspects to implementing and synchronizing a non-stationary distributed digital phased array. This research …

Open Source Microgrid Integration, Zachary J. Kwast

Master's Theses

Microgrids are small-scale electrical systems that operate in tandem with a centralized grid to provide power to a smaller group of target devices. These microgrids are used for a wide range of different purposes, which invites the need for a generalized model that can be tweaked for a variety of uses. This document goes over the theory used to design an open source AC and DC microgrid meant for use by anyone. The microgrid is created using a Raspberry Pi that controls two different power converters so that a wide range of voltage and current characteristics can be achieved. These …

Hybrid Fea And Meta-Modeling For De Optimization Of A Pm Stator-Excited Motor With A Reluctance Rotor, Oluwaseun A. Badewa, Dan M. Ionel

Electrical and Computer Engineering Graduate Research

This paper presents an innovative method for designing high-performance electric motors by integrating machine learning (ML) based meta-modeling with a differential evolution (DE) optimization algorithm. The approach utilizes finite element analysis (FEA) data to train the ML meta-model, allowing for efficient optimization of high-power-density machines, such as the reluctance rotor and permanent magnet (PM) stator combined excitation motor, which is characterized by nonlinearities. The meta-modeling process employs an Artificial Neural Network (ANN) with 3 hidden layers and uses the motor’s geometrical variables as inputs. The accuracy of the meta-model in capturing the nonlinear relationships between design parameters, core losses, and …

Prepare Lora Physical Layer For Testing In Low Earth Orbit On A Cubesat, Sammy Brunton

Electrical Engineering

This project is a collaboration with OWL Integrations, a company that specializes in adaptable, low-cost communication systems. OWL has developed a board specifically designed for space applications called the Space Quacker Advanced Development (SQuAD), which is an adaptation of their existing board called the Quaker Advanced Development (QUAD).

This project focuses on testing the existing SQuAD board design to make sure that it is flight-ready for deployment on Cal Poly CubeSat’s satellite, SAL-E. To achieve this, the project must ensure compatibility with Low Earth Orbit (LEO) conditions by testing the integrated high-power long-range (LoRa) receiver and enhanced hardware to meet …

2024 – 2025 Cal Poly Wind Power Ac-Dc Rectification Subsystem For Collegiate Wind Competition 2025, Ryan Rayos, Annabella Piercey, Alex Liu

Electrical Engineering

This project focuses on the design and development of a bidirectional AC-DC rectification subsystem for a wind energy conversion system (WECS), tailored for the 2025 Collegiate Wind Competition. The subsystem is defined by its core inputs and outputs where it receives AC power from the wind turbine generator and delivers stable DC power to auxiliary electronics and variable loads. Conversely, the system can also accept DC power, such as from wall power, and output AC power to drive the permanent magnet synchronous machine (PMSM) as a motor, overcoming cogging torque and initiating turbine blade rotation. This bidirectional functionality is enabled …