Digital Commons Network^™

Optical Bandgap Formation In Alingan Alloys, G. Tamulaitis, K. Kazlauskas, S. Juršėnas, A. Žukauskas, M. A. Khan, J. W. Yang, J. Zhang, Grigory Simin, M. S. Shur, R. Gaska

Faculty Publications

We report on the spectral dynamics of the reflectivity, site-selectively excited photoluminescence,photoluminescence excitation, and time-resolved luminescence in quaternary AlInGaN epitaxial layers grown on GaN templates. The incorporation of a few percents of In into AlGaN causes significant smoothening of the band-bottom potential profile in AlInGaN layers owing to improved crystal quality. An abrupt optical bandgap indicates that a nearly lattice-matched AlInGaN/GaN heterostructure with large energy band offsets can be grown for high-efficiency light-emitting devices.

Design And Rule Base Reduction Of A Fuzzy Filter For The Estimation Of Motor Currents, Daniel J. Simon

Electrical and Computer Engineering Faculty Publications

Fuzzy systems have been used extensively and successfully in control systems over the past few decades, but have been applied much less often to filtering problems. This is somewhat surprising in view of the dual relationship between control and estimation. This paper discusses and demonstrates the application of fuzzy filtering to motor winding current estimation in permanent magnet synchronous motors. Motor winding current estimation is an important problem because in order to implement effective closed-loop control, a good estimation of the current is needed. Motor winding currents are notoriously noisy because of electrical noise in the motor drive. We use …

Laboratories Teaching Concepts In Microcontrollers And Hardware-Software Co-Design, Daryl G. Beetner, Hardy J. Pottinger, Kyle Mitchell

Electrical and Computer Engineering Faculty Research & Creative Works

Hardware software co-design is becoming increasingly important to the embedded systems industry. It will soon be fundamental to digital systems design. As such, students in electrical and computer engineering and in computer science should be introduced to hardware-software co-design early in their undergraduate education.

We are designing laboratory modules which introduce concepts of hardware-software co-design in an undergraduate's first course on microcontrollers and digital systems design. Students use design automation tools to develop FPGA-based hardware for use with an 8051-microcontroller and use common software development tools to develop microcontroller software in C or assembly language. Co-simulation of hardware and software …

Fabrication And Characterization Of Silicon Field Emitter Arrays, Aaron M. Brock

Electrical & Computer Engineering Theses & Dissertations

Field emission is a process through which the application of a large electric field to the surface of a material causes electron emission into vacuum. The electron emission current is a strong function of the geometry of the emitting material. The focus of this thesis is to investigate the effect of geometry on the emission current. Specifically, silicon field emitter arrays were fabricated using two separate fabrication processes termed the standard process and the new process. The uniformity of the arrays was measured experimentally. The arrays were used in field emission tests from which parameters controlling field emission were extracted. …

Distributed Arithmetic Implementation Of Multivariable Controllers For Smart Structural Systems, Lingfeng Yuan, Sridhar Sana, Hardy J. Pottinger, Vittal S. Rao

Electrical and Computer Engineering Faculty Research & Creative Works

Smart structural systems require the electronic control systems which are integrated into the structures to be small, lightweight and power-efficient. The field programmable gate array (FPGA) is a good platform to implement such controllers. In our previous work, FPGA-based digital controllers were built and tested on a simple structural system. In order to implement multivariable controllers, the hardware resources for FPGA-based architecture need to be further reduced. Distributed arithmetic (DA) has long been proven to be a very efficient means to mechanize computations that are dominated by inner products involving constant multiplicand. The computational requirements of the smart structural controllers …

Emi From Airflow Aperture Arrays In Shielding Enclosures-Experiments, Fdtd, And Mom Modeling, Min Li, Joe Nuebel, James L. Drewniak, Richard E. Dubroff, Todd H. Hubing, Thomas Van Doren

Electrical and Computer Engineering Faculty Research & Creative Works

Aperture arrays designed to provide airflow through shielding enclosures can provide part of the coupling path from interior sources to external electromagnetic interference (EMI). In this work, radiation through aperture arrays is investigated numerically and experimentally. FDTD modeling is compared with measurements on aperture arrays in a test enclosure. The method of moments (MoM) is also utilized to study radiation from apertures and to investigate the mutual coupling between apertures in an infinite conducting plane. A simple design equation for the relation between aperture size and number and shielding effectiveness is proposed.

The Emi Benefits Of Ground Plane Stitching In Multi-Layer Power Bus Stacks, Xiaoning Ye, David M. Hockanson, Min Li, Wei Cui, S. Radu, James L. Drewniak, Thomas Van Doren, Todd H. Hubing, Richard E. Dubroff

Electrical and Computer Engineering Faculty Research & Creative Works

The effect on EMI of stitching multiple ground planes together along the periphery of multi-layer PCB stacks is studied. Power bus noise induced EMI and radiation from the board edges is the major concern herein. The EMI at 3 meters for different via stitch spacing and layer thickness is modeled with FDTD modeling. It is shown that the ground plane stitching effectively reduces the radiated EMI that results from fringing fields at the power bus edges. Two families of curves are generated to demonstrate the variation of the radiated EMI as a function of layer thickness and stitch spacing. Further …

Real-Time Performance Analysis Of Wireless Multimedia Networks Based On Partially Observed Multivariate Point Processes, William S. Hortos

Electrical Engineering and Computer Science Faculty Publications

Third-generation (3G) wireless networks will support integrated multimedia services based on a cellular extension of a packet-switched architecture using variants of the Internet protocol (IP). Services can be categorized as real-time and delaysensitive, or non-real-time and delay-insensitive. Each call, arriving to or active within the network, carries demand for one or more services in parallel; each service type with a guaranteed quality of service (QoS). Admission of new calls to the wireless IP network (WIN) from the gateway of a wired network or from a mobile subscriber (MS) is allowed by call admission control (CAC) procedures. Roaming of the MSs …

Pattern Classification Approach To Underwater Acoustic Communications Based On The Wigner-Ville Distribution, Frank M. Caimi, Gamal A. Hassan

Electrical Engineering and Computer Science Faculty Publications

This paper describes an approach and preliminary results associated with the use of pattern recognition techniques to identify transmitted information (symbols) in a temporally variant acoustic channel. The method allows the observation of the transmitted signal simultaneously in both time and frequency space and does not necessarily rely on the application of adaptive algorithms for reception. The observation of the symbol energy from the Wigner-Ville Distribution as two-dimensional pattern can allow the determination of channel characteristics over short symbol sequences and can provide a means for symbol detection. For the QPSK modulation used, wavelet filtering provides a basis for noise …

2deg Channel-Dependent Model For Hg1-Xcdxte Based Pseudomorphic Hemts, Hang-Ming Dai, Thomas J. Sanders

Electrical Engineering and Computer Science Faculty Publications

HgCdTe has emerged as an important electronic material because of its IRFPA applications. Technologies for growing the material are advanced and current sources for the material are more readily available than in the past. This brings an advantage to the manufacturing other types of HgCdTe devices. PHEMTs are attractive as applications of high-speed devices. In this paper, a model for PHEMT devices by using Hg1 Cd1Te as device materials is presented. High digital performance of the device is expected because electron mobility ofthe material is very high at low temperatures.

Optical Properties Of Bulk And Thin-Film Srtio3 On Si And Pt, Stefan Zollner, A. A. Demkov, R. Liu, P. L. Fejes, R.B. Gregory, Prasad Alluri, J. A. Curless, Z. Yu, J. Ramdani, R. Droopad, T. E. Tiwald, J. N. Hilfiker, John A. Woollam

Department of Electrical and Computer Engineering: Faculty Publications

We have studied the optical properties (complex dielectric function) of bulk SrTiO₃ and thin films on Si and Pt using spectroscopic ellipsometry over a very broad spectral range, starting at 0.03 eV [using Fourier transform infrared (FTIR) ellipsometry] to 8.7 eV. In the bulk crystals, we analyze the interband transitions in the spectra to determine the critical-point parameters. To interpret these transitions, we performed band structure calculations based on ab initio pseudopotentials within the local-density approximation. The dielectric function was also calculated within this framework and compared with our ellipsometry data. In the FTIR ellipsometry data, we notice a …

Thermal Lattice Boltzmann Simulation For Multispecies Fluid Equilibration, Linda L. Vahala, Darren Wah, George Vahala, Jonathan Carter, Pavol Pavlo

Electrical & Computer Engineering Faculty Publications

The equilibration rate for multispecies fluids is examined using thermal lattice Boltzmann simulations. Two-dimensional free-decay simulations are performed for effects of velocity shear layer turbulence on sharp temperature profiles. In particular, parameters are so chosen that the lighter species is turbulent while the heavier species is laminar-and so its vorticity layers would simply decay and diffuse in time. With species coupling, however, there is velocity equilibration followed by the final relaxation to one large co- and one large counter-rotating vortex. The temperature equilibration proceeds on a slower time scale and is in good agreement with the theoretical order of magnitude …

Signal Modeling With Non-Uniform Time Sampling Of Features For Automatic Speech Recognition, Montri Karnjanadecha

Electrical & Computer Engineering Theses & Dissertations

This dissertation presents an investigation of non-uniform time sampling methods for spectral/temporal feature extraction in speech. Frame-based features were computed based on an encoding of the global spectral shape using a Discrete Cosine Transform. In most current “standard” methods, trajectory (dynamic) features are determined from frame-based parameters using a fixed time sampling, i.e., fixed block length and fixed block spacing. In this research, new methods are proposed and investigated in which block length and/or block spacing are variable. The idea was initially tested with HMM-based isolated word recognition, and a significant performance improvement resulted when a variable block length and …

Simulation Studies Of Cellular Electroporation Due To Ultra-Fast Electric Pulses, Gayathri R. Barthaki

Electrical & Computer Engineering Theses & Dissertations

Biological systems, from cells to ecosystems, are intrinsically complex information-processing networks. It often becomes difficult to predict their behavior during an experimental investigation, as their behavior is fundamentally chaotic, Hence, building models that mimic the dynamics of such systems and performing computer simulations would help in understanding, predicting, controlling and optimizing these systems. This thesis is aimed at the development of a mathematical model for the process of electroporation in biological cells when they are subjected to ultra-fast electric pulses and at conducting simulations to understand its dynamic behavior with special emphasis on the physics of ultra-short time scales.

With …

An Iterative Approach To Multisensor Sea Ice Classification, David G. Long, Mark R. Drinkwater, Quinn P. Remund

Faculty Publications

Characterizing the variability in sea ice in the polar regions is fundamental to an understanding of global climate and the geophysical processes governing climate changes. Sea ice can be grouped into a number of general classes with different characteristics. Multisensor data from NSCAT, ERS-2, and SSM/I are reconstructed into enhanced resolution imagery for use in ice-type classification. The resulting twelve-dimensional data set is linearly transformed through principal component analysis to reduce data dimensionality and noise levels. An iterative statistical data segmentation algorithm is developed using maximum likelihood (ML) and maximum a posteriori (MAP) techniques. For a given ice type, the …

Azimuth Variation In Microwave Scatterometer And Radiometer Data Over Antarctica, David G. Long, Mark R. Drinkwater

Faculty Publications

While designed for ocean observation, scatterometer and radiometer data have proven very useful in a variety of cryosphere studies. Over large regions of Antarctica, ice sheet and bedrock topography and the snow deposition, drift, and erosional environment combine to produce roughness on various scales. Roughness ranges from broad, basin-scale ice-sheet topography at 100 km wavelengths to large, spatially coherent dune fields at 10 km wavelength to erosional features on the meter scale known as sastrugi. These roughness scales influence the microwave backscattering and emission properties of the surface, combining to introduce azimuth-angle dependencies in the satellite observation data. In this …

X-Ray Rocking Curve Analysis Of Tetragonally Distorted Ternary Semiconductors On Mismatched (001) Substrates, X. Zhang, David W. Parent, P. Li, A. Rodriguez, G. Zhao, J. Ayers, F. Jain

Faculty Publications

For ternary heteroepitaxial layers, the independent determination of the composition and state of strain requires x-ray rocking curve measurements for at least two different hkl reflections because the relaxed lattice constant is a function of the composition. The usual approach involves the use of one symmetric reflection and one asymmetric reflection. Two rocking curves are measured at opposing azimuths for each hkl reflection. Thus, it is possible to account for tilting of the hkl planes in the epitaxial layer with respect to the hkl planes in the substrate, by averaging the peak separations obtained at the opposing azimuths. This procedure …

Gaussian Beams In Hollow Metal Waveguides, Lee W. Casperson

Electrical and Computer Engineering Faculty Publications and Presentations

Various families of Gaussian beams have been explored previously to represent the propagation of nearly plane electromagnetic waves in media having at most quadratic transverse variations of the index of refraction and the gain or loss in the vicinity of the beam. However, such beams cannot directly represent the wave solutions for propagation in planar or rectangular waveguides, and sinusoidal mode functions are more commonly used for such waveguides. On the other hand, it is also useful to consider the possibility of recurring Gaussian beams that have an approximately Gaussian transverse profile at certain distinct planes along the propagation path. …

Planar Approximation For The Least Reliable Bit Log-Likelihood Ratio Of 8-Psk Modulation, William H. Thesling, Fuqin Xiong, M. J. Vanderaar

Electrical and Computer Engineering Faculty Publications

The optimum decoding of component codes in block coded modulation (BCM) schemes requires the use of the log-likelihood ratio (LLR) as the signal metric. An approximation to the LLR for the least reliable bit (LRB) in an 8-PSK modulation based on planar equations with fixed-point arithmetic is developed that is both accurate and easily realisable for practical BCM schemes. Through an error power analysis and an example simulation it is shown that the approximation results in less than 0.06 dB in degradation over the exact expression at an E_s/N₀ of 10 dB. It is also shown that …

A New Approach For Computing The Bandwidth Statistics Of Avalanche Photodiodes, Majeed M. Hayat, Guoquan Dong

Electrical and Computer Engineering Faculty Research and Publications

A new approach for characterizing the avalanche-buildup-time-limited bandwidth of avalanche photodiodes (APDs) is introduced which relies on the direct knowledge of the statistics of the random response time. The random response time is the actual duration of the APD’s finite buildup-limited random impulse response function. A theory is developed characterizing the probability distribution function (PDF) of the random response time. Recurrence equations are derived and numerically solved to yield the PDF of the random response time. The PDF is then used to compute the mean and the standard deviation of the bandwidth. The dependence of the mean and the standard …

Investigation Of The Baroreflex Of The Rat : Steady State And Dynamic Features, Xiaorui Tang

Dissertations

The baroreflex is one of the most important feedback systems in the body to maintain blood pressure variation within the homeostatic range. In this dissertation, the important features of the carotid and aortic baroreflexes have been extensively investigated on ventilated, central nervous system intact, neuromuscular blocked (NMB) rats using different control system and signal processing tools. Studies have demonstrated that sinoaortic denervation (SAD) caused substantial increases in the blood pressure variability. Comparing the pre- and post-SAD blood pressure spectra, there was a significant increase of power in the very low frequency region (0.00195 -0.2 Hz), and a significant decrease of …

Programmable Latching Probe Microstructures For Wafer Testing Applications, Salima Taifa Sadeq

Theses

The objective of this thesis is to design a programmable wafer testing array on a single chip based on micro electromechanical systems (MEMS) and VLSI. The wafer-scale integration in this thesis is a programmable array of test probes that are used for engineering test of VLSI and ULSI silicon integrated circuits at the wafer level. This consists of two subsystems (1) the VLSI address circuits used for addressing and controlling the MEMS on the chip and (2) the latching probe MEMS microstructure array that actuates into position for testing VLSI wafers. Each of the subsystems have been designed, analyzed and …

Circular Optimal Trade-Off And Distance-Classifier Correlation Filters, Samuel Peter Kozaitis, Sila Thangwaritorn

Electrical Engineering and Computer Science Faculty Publications

We use circular versions of advanced distortion-invariant filters such as optimal trade-off synthetic discriminant function and distance classifier correlation filters to obtain rotation invariance with an optical correlator. The filter noise performance is compared using a common measure of probability of error because the filters have different characteristics. The filters are real-valued so they can be implemented on a variety of SLMs. The circular symmetry of the filters significantly decreases their computational requirement.

3d Outside Cell Interference Factor For An Air-Ground Cdma ‘Cellular’ System, David W. Matolak

Faculty Publications

We compute the outside-cell interference factor of a code-division multiple-access (CDMA) system for a three-dimensional (3-D) air-to-ground (AG) "cellular-like" network consisting of a set of uniformly distributed ground base stations and airborne mobile users. The CDMA capacity is roughly inversely proportional to the outside-cell interference factor. It is shown that for the nearly free-space propagation environment of these systems, the outside-cell interference factor can be larger than that for terrestrial propagation models (as expected) and depends approximately logarithmically upon both the cell height and cell radius.

Multilevel Coded Modulation For Unequal Error Protection And Multistage Decoding—Part Ii: Asymmetric Constellations, Motohiko Isaka, Marc P. C. Fossorier, Robert H. Morelos-Zaragoza, Shu Lin, Hideki Imai

Faculty Publications

In this paper, multilevel coded asymmetric modulation with multistage decoding and unequal error protection (UEP) is discussed. These results further emphasize the fact that unconventional signal set partitionings are more promising than traditional (Ungerboeck-type) partitionings, to achieve UEP capabilities with multilevel coding and multistage decoding. Three types of unconventional partitionings are analyzed for asymmetric 8-PSK and 16-QAM constellations over the additive white Gaussian noise channel to introduce design guidelines. Generalizations to other PSK and QAM type constellations follow the same lines. Upper bounds on the bit-error probability based on union bound arguments are first derived. In some cases, these bounds …

Emi Reduction From Airflow Aperture Arrays Using Dual-Perforated Screens And Loss, Min Li, Joe Nuebel, James L. Drewniak, Todd H. Hubing, Richard E. Dubroff, Thomas Van Doren

Electrical and Computer Engineering Faculty Research & Creative Works

Airflow perforations in shielding enclosures can act as apertures facilitating the coupling from internal sources to external electromagnetic interference (EMI). This EMI radiation for single- and dual-screen configurations was studied herein experimentally and with finite-difference time-domain (FDTD) modeling. A general EMI reduction of more than 20 dB was achieved for dual-perforated screens spaced 1 cm apart when compared to EMI for a single perforated screen. However, in the dual-screen case, the space between the screens can act as a thin cavity, which, in turn, can lead to significant radiation at distinct angles. Damping the resonances by loading the space between …

Emi Resulting From A Signal Via Transition Through Dc Power Bus-Effectiveness Of Focal Smt Decoupling, Wei Cui, Xiaoning Ye, Bruce Archambeault, Doug White, Min Li, James L. Drewniak

Electrical and Computer Engineering Faculty Research & Creative Works

Signal vias are commonly used in multilayer printed circuit board (PCB) design. For a signal via transitioning through the internal power and ground planes, the return current has to jump from one reference plane to another reference plane. The discontinuity of the return current at the via excites the power and ground planes, and results in power bus noise, and can produce an EMI problem as well. Numerical methods, such as finite-difference time-domain (FDTD), moment methods (MoM), and partial element equivalent circuit (PEEC), were employed herein to study this problem. The modeled results were supported by the measurements. In addition, …

Maintenance Registers With Boundary Scan Interface, Shianling Wu, Ramesh Karri, Charles Eugene Stroud

Electrical and Computer Engineering Faculty Patents

Concurrent Fault Detector Circuits (CFDCs) are test components of a main system, e.g. an Application Specific Integrated Circuit, and provide the results of the tests in parallel to at least one Error Source Register (ESR). Instead of reading out the ESR in parallel, its contents are copied to a serial shadow register so the contents can be read out in series to an error correcting application, thus reducing the number of output pins and the burden on resources of the main system. The ESR's receipt and transfer of information is under the control of a Boundary Scan Interface. In one …

Bulk Micromachining Of Silicon For Moems Prototype, Sung-Dong Suh

Doctoral Dissertations

In this dissertation, the optical application of silicon micromachining technology was investigated in order to create the three-dimensional microstructures that can be used as the components for the MOEMS prototype. These microstructures were designed and fabricated by utilizing corner compensation techniques and silicon bulk micromachining technologies. The fabricated microstructures are silicon mirror arrays that have a 1250 μm etch depth and through-holes across the OE-MCM substrate that has sixteen-fan-out OCDN on front side and a 1mm thickness.

Guided-wave OCDN on MCMs are designed and fabricated to meet the high-speed clocking requirements of next-generation digital systems through a realization of superior …

A Cmos Chaotic Oscillator, Boonsin Chansilp

Masters Theses

A chaotic oscillator may be used as the basic component of an associative memory (AM). An AM is capable of pattern separation and noise reduction. Chua's circuit is a widely used chaotic oscillator. This circuit consists of a nonlinear resistor, two capacitors, an inductor and a resistor. A discrete implementation of Chua's circuit may be built using operational amplifiers, resistors, diodes, or discrete bipolar transistors. CMOS integrated circuit technology provides the opportunity for a compact implementation which enables construction of systems requiring a large number of oscillators. This thesis develops an integrated circuit design based on previous work performed by …