Digital Commons Network^™

Design And Performance Analysis Of A Frequency-Reconfigurable Rectangular Patch Antenna With Dual-Slot Defected Ground Structure For Gsm Band, Sara Abdelbaset, Ashraf Khalaf, Amr Hussien, Ahmed A. Kabeel

Journal of Engineering Research

In this paper, an innovative frequency-tunable rectangular patch antenna is presented, featuring interlaced circular and U-shaped narrow slots, combined with a rectangular-shaped defected ground structure (DGS). This design is specifically developed to produce radiation patterns similar to those of traditional dipole antennas. The integration of the rectangular DGS with three RF varactor diodes, along with two equivalent microstrip conductors, enables a tunable operating frequency band that ranges from 1.08 GHz to 1.7 GHz, achieving a total bandwidth of 0.62 GHz. The DC biasing network connected to the three RF varactor diodes is utilized to finely tune and adjust the resonance …

Underwater Acoustic Integrated Sensing And Communication: A Spatio-Temporal Freshness For Intelligent Resource Prioritization, Ananya Hazarika, Mehdi Rahmati

Electrical and Computer Engineering Faculty Publications

Underwater acoustic communication faces significant challenges including limited bandwidth, high propagation delays, severe multipath fading, and stringent energy constraints. While integrated sensing and communication (ISAC) has shown promise in radio frequency systems, its adaptation to underwater environments remains challenging due to the unique acoustic channel characteristics and the inadequacy of traditional delay-based performance metrics that fail to capture the spatio-temporal value of information in dynamic underwater scenarios. This paper presents a comprehensive underwater ISAC framework centered on a novel Spatio-Temporal Information-Theoretic Freshness metric that fundamentally transforms resource allocation from delay minimization to value maximization. Unlike conventional approaches that treat all …

Detecting Electrical Submersible Pump (Esp) Failures And Estimating Run Life Using Artificial Neural Networks, Mostafa Ahmed Sobhy

Theses and Dissertations

Electric Submersible Pumps (ESPs) are one of the important artificial lift methods for sustaining production in mature and high-water-cut wells; but may suffer frequent failures due to mechanical, electrical, hydraulic, chemical, and operational failures. These failures can yield substantial deferred production and intervention costs. Plenty of ESP installations are fitted with downhole sensors. Yet, it is observed that the current industry practice underutilizes the wealth of available sensor and operational data and lacks standardized, explainable failure-type identification and classification.

In this thesis, a comprehensive Machine Learning (ML) and Deep Learning (DL) framework was introduced for ESPs that simultaneously estimates remaining …

Application Of Neural Networks For Intelligent Processing Of Sensor Signals In The Control Of Technological Process Parameters, N.R. Yusupbekov, Yu.Sh. Avazov, G.Kh. Rashidov

Chemical Technology, Control and Management

This scientific article investigates the problem of analyzing technological process parameters in the fields of chemistry, energy, and metallurgy based on sensor data and applying intelligent signal processing methods. The main objective is to evaluate the effectiveness of artificial intelligence and deep learning models for intelligent analysis, forecasting, and anomaly detection of data obtained from sensors. Time-series data collected from industrial sensors were analyzed using LSTM (Long Short-Term Memory) and Autoencoder neural networks, as well as the Kalman filter. At the first stage of the study, sensor signals were denoised and their true state was estimated using the Kalman filter. …

Research And Development Of Intelligent Measurement Systems, Odil Abdujalilovich Jumaev, Mahmudov Giyosjon Baqoyevich

Chemical Technology, Control and Management

The article discusses modern methods for developing intelligent measuring systems. Intelligent measuring systems are systems based on intelligent technologies that not only accurately measure physical or chemical quantities, but also have the ability to self-analyze, diagnose and make management decisions. The article comprehensively examines the architecture, components of such systems, the organization of their software and hardware, the relationship of sensors and artificial intelligence algorithms. It also analyzes the practical application and prospects of intelligent measuring systems in such areas as industry, medicine, energy, ecology, transport.

Finding The Shortest And Optimal Path With Metaheuristic And Madm Methods, Narmin Ibrahim Hasanli

Chemical Technology, Control and Management

The article had described a method for finding the shortest and most optimal path among cities. The data had been taken from the TSPLIB library, which had provided standard examples for the Traveling Salesman Problem. This approach had integrated the advantages of the meta-heuristic technique and the Multi Attribute Decision Making method to solve the problem effectively. In the first stage, the population based meta-heuristic method ACO (Ant Colony Optimization) had found optimal solutions in large search spaces. The use of pheromone trails, heuristic information and an iterative search process had given the opportunity to find the best or near-best …

Clinic Vs. Daily Life Gait Characteristics In Patients With Spinocerebellar Ataxia, Vrutangkumar V. Shah, Daniel Muzyka, Adam Jagodinsky, Hannah Casey, James Mcnames, Mahmoud El-Gohary, Kristen Sowalsky, Delaram Safarpour, Patricia Carlson-Kuhta, Fay B. Horak, Christopher M. Gomez

Electrical and Computer Engineering Faculty Publications and Presentations

Background:

Recent findings suggest that a single gait assessment in a clinic may not reflect everyday mobility.ObjectiveWe compared gait measures that best differentiated individuals with spinocerebellar ataxia (SCA) from age-matched healthy controls (HC) during a supervised gait test in the clinic vs. a week of unsupervised gait during daily life.

Methods: Twenty-six individuals with SCA types 1, 2, 3, and 6, and 13 (HC) wore three Opal inertial sensors (on both feet and lower back) during a 2-minute walk in the clinic and for seven days in daily life. Seventeen gait measures were analyzed to investigate the group differences using …

Optimizing Object Detection For Remote Monitoring With Owl Ducklink Radios, Colin Ren-Jin Babian

Electrical Engineering

This project develops an AI powered object detection system integrated with OWL DuckLink radios to enable real time remote monitoring. The system benchmarks multiple AI accelerators using a Raspberry Pi 5 to determine their efficiency in low power, long range communication environments. By evaluating the Raspberry Pi 5 CPU (7.62W, 14.5 camera FPS, 3.8 inference FPS), Raspberry Pi AI Camera with Sony IMX500 (6.45W, 30 camera FPS, 9.2 inference FPS), and Raspberry Pi AI Hat with Hailo-8L chipset (7.80W, 30 camera FPS, >30 inference FPS), this project identifies the most effective combination of hardware and software for edge AI applications. …

Restoration Of 6-Axis Industrial-Grade Robotic Arms, Bryce Andrew Paulson, Warren Douglas Howard

Electrical Engineering

The Staubli TX60 and TX60CR are industrial-grade, six-axis robotic arms originally designed to perform complex automation tasks in manufacturing environments. Following their retirement from active industrial use, both units were restored to full operational status. As part of this project, they were reprogrammed to execute a pick-and-place routine using kids shape-sorting toys that mirrors typical workflows found in factory settings. The six degrees of freedom afforded by each robot enable a wide range of motion, making them well-suited for tasks such as material handling, product sorting, and repetitive operations typically carried out by human workers. Each model is equipped with …

A Tailored Analog-To-Digital Converter Architecture For Optimal Performance In Troponin Cardiac Protein Detection, Karem Abdelgawad, Sameh O. Abdellatif

Electrical Engineering

In recent years, the detection of troponin cardiac proteins has emerged as a crucial component in the diagnosis and management of acute coronary syndromes. This paper presents a tailored analog-to digital converter(ADC) architecture specifically designed to enhance the performance of diagnostic systems for troponin detection. Utilizing a 180 nm CMOS process technology, the developed 8-bit Successive Approximation Register(SAR) ADC integrates key components, including a preamplifier, comparator, and a digital-to-analog converter(DAC), to optimize signal processing and ensure accurate data conversion from analog to digital formats. The ADC architecture is evaluated for its ability to achieve a substantial sampling rate of 10 …

Switching Performance Optimization Of Sic Mosfets With Digital Active Gate Drivers, Liyang Du

Graduate Theses and Dissertations

Silicon carbide (SiC) metal-oxide-semiconductor field-effect transistors (MOSFETs) have extensive applications in high-power density devices, but they exhibit quick switching transients that are problematic, including electromagnetic interference (EMI), voltage overshoot, and current imbalance between paralleled devices. The purpose of this dissertation is to maximize the switching performance of SiC MOSFETs using digital active gate drivers (AGDs). A three-level gate driving approach is presented to improve current sharing in paralleled SiC MOSFETs through turn-on voltage and gate signal delay adjustment. Closed-loop control with real-time feedback ensures high-reliability operation. For better practicability, a compact AGD structure of a single-path Class-B amplifier-based topology is …

Exopg Maturation And Owl Interface, Duncan Michael Louden

Electrical Engineering

The maturation of the ExOPG buoy generator consists of an interface to facilitate remote data acquisition of an existing battery charge controller. This module telemeters battery controller data including voltage, temperature, and state of battery charge. The data is transmitted to a communication system and is able to be viewed by humans on a 24/7 basis for continuous operation and human usage. The module works seamlessly as an addition to the existing ExOPG generator, and it does not interfere with any existing and planned components of the generator. The module is highly efficient and draws minimal power from the existing …

Validation And Proposed Expansion Of The Data-Driven D Region Model, Kevin M. Watson

Theses and Dissertations

Predicting ionosphere effects on radio wave propagation is critical for communications and over-the-horizon radar systems. The D region is challenging to model for several reasons, one of which is chemical complexity. Ion density changes during sunrise/sunset introduce substantial uncertainty in electron density profiles (EDPs). The Data Driven D Region (D3R) model solves electron densities through an ion chemistry model and assimilates relevant space weather inputs. This study evaluates D3R against the Faraday International Reference Ionosphere (FIRI) and measurements using Very Low Frequency (VLF) propagation paths. Space weather event impacts on D3R EDPs are evaluated during the disturbed period from 8-12 …

Single-Molecule Orientation And Localization Microscopy, Sophie Brasselet, Matthew D. Lew

Electrical & Systems Engineering Publications and Presentations

Single-molecule localization microscopy (SMLM) offers enhanced spatial resolution in optical microscopy, providing detailed insights into the spatial organization of proteins in cells at the nanoscale. Over the past decade, SMLM has progressively incorporated the capability to retrieve the orientations of single molecules using their polarized dipolar emission pattern. Here we explore recent advancements in single-molecule orientation and localization microscopy (SMOLM), which yields super-resolved images of molecular three-dimensional (3D) orientations, wobble and 3D positions. This advancement opens possibilities to explore the nanoscale organization and conformation of biological molecules as well as to monitor and design local 3D optical fields in nanophotonics. …

Large Lithium-Ion Battery Model For Secure Shared E-Bike Battery In Smart Cities, Donghui Ding, Zhao Li, Linhao Luo, Ming Jin, Bin Zhu, Yichen Zhong, Junhao Hu, Peng Cai, Huiqi Hu

Research Collection School Of Computing and Information Systems

Electric bikes powered by lithium-ion batteries are increasingly used in smart cities to promote sustainable mobility and efficient delivery services. However, limited battery range and slow plug-in charging remain key challenges. Shared electric bike battery systems, facilitated by battery swapping stations, offer a promising solution by enabling quick and efficient battery replacements. However, their success hinges on accurate anomaly detection, battery health estimation and remain range prediction. These tasks remain challenging due to data scarcity, battery diversity and environmental variability. Here we show that a large-scale lithium-ion battery model trained on over ten million battery time series data enables robust …

Optimizing Hip And Knee Assistance For Walking And Sit-To-Stand Transitions: An Intrinsic Muscle Mechanics Based Predictive Approach, Neethan Ratnakumar

Dissertations

As the global population ages, the demand for wearable assistive technologies continues to rise, driven by their potential to enhance mobility and independence in older adults. Effectively designed controllers for lower-limb exoskeletons to assist sit-to-stand (STS) and walking are crucial for delivering efficient, safe, and comfortable assistance during daily activities. Traditionally, controller optimization involves biomechanical modeling and user-specific customization. Musculoskeletal simulations play a central role in this process by providing insights into human-exoskeleton interaction dynamics, thereby informing and refining control strategies.

This work presents a simulation-driven approach for developing exoskeleton controllers for walking and STS using two distinct methods: optimal …

Direct Control Strategy Using Polynomial Fuzzy-Based Adaptive Fractional Order Pid Controller, Ali Rospawan, Clara Lavita Angelina, Faisal Samsuri, Muhammad Yeza Baihaqi, Edmun Halawa, Muhammad Munajat, Vincent Vincent, Surawan Setiyadi, Irwan Purnama, Joni Welman Simatupang

Makara Journal of Technology

This paper presents a novel direct control strategy using a polynomial fuzzy neural network-based adaptive fractional order proportional integral derivative (PFNN-AFOPID) controller for nonlinear and time-varying systems. The proposed approach integrates the enhanced flexibility of fractional order calculus PID with the superior nonlinear approximation capabilities of polynomial fuzzy models, enabling dynamic adjustment of all control parameters without requiring precise mathematical modeling of system dynamics. By extending traditional PID control with fractional-order operations, the controller achieves improved frequency response and robustness against disturbances. Experimental validation on a DC motor position control system demonstrates significant performance improvements. Compared to traditional PID, the …

Analog To Digital Converters Topologies For Radar System Application: A Comparison, Kulsoom Mateen, Wafa Alharbi, Aziza I. Hussein

Effat Undergraduate Research Journal

Analog-to-digital converters (ADCs) that convert analog signals into digital ones play a significant role in radar systems. The accuracy and resolution of radar readings are significantly influenced by the quality and performance of ADCs. This paper discusses and compares the application of five different types of ADCs in radar systems. It also elaborates on each ADC's working principle, advantages, and limitations. The parameters compared are resolution and dynamic range, signal-to-noise ratio (SNR), latency and sampling rate, power consumption, size, and cost. After thorough research, we concluded that each ADC differs depending on the designer’s desired application. For example, flash ADCs …

Satellite Internet Technology: Connect The Unconnected, Nora Turki Alamoudi Ms., Aziza I.Hussien Proffessor

Effat Undergraduate Research Journal

Satellite Internet is the internet provided through a network of communication satellite constellations in space. This type of internet can cover an area of a wider range than the commonly used cable internet. The development of small-sized satellite technology in the commercial space sector has entered a vigorous phase of development. However, approximately four billion individuals worldwide lack internet access. Most of these citizens live in developing countries. It is in this context that the industry of satellite internet is expanding its social and economic development through connectivity. The implementation of the idea requires examining the advantages provided by satellite …

Sar Analog-To-Digital Converters For Point-Of-Care Biosensors: A Comparison, Eithar Alammari, Joud Alamro, Sara Alashwali, Ghadah S. Alyami, Aziza I. Hussein

Effat Undergraduate Research Journal

The SAR ADC, recognized for its low power consumption, moderate resolution, and satisfactory processing speed, stands as an ideal choice for ultra-low power biomedical applications. Recent efforts have been concentrated on enhancing the power efficiency of the SAR ADC sub-components through intricate refinements and innovative techniques. These efforts aim to minimize energy consumption without compromising the ADC's performance. Therefore, this paper aims to thoroughly examine various implementation approaches for the main components of the SAR ADC, highlighting their individual strengths, weaknesses, and limitations within wireless biomedical applications.

Continuous Versus Discrete-Time Sigma-Delta Analog To Digital Converters For Biomedical Applications: A Comparison, Haya H. Binsalim, Batool Alaidroos, Basma Shigdar, Salma Badaam, Aziza I. Hussein

Effat Undergraduate Research Journal

Continuous-time (CT) and discrete-time (DT) sigma-delta (ΔΣ) converters are two commonly used techniques for analog-to-digital conversion. While both methods operate based on the principles of oversampling and noise shaping, they differ in their implementation and performance characteristics. CT ΔΣ converters use analog circuits to sample and process signals continuously, while DT ΔΣ utilizes digital circuits to sample and process signals at discrete intervals. This paper presents a comprehensive comparison between CT and DT ΔΣ converters, highlighting their advantages and limitations. The comparison is made in terms of design complexity, power consumption, signal-to-noise ratio (SNR), and other essential parameters in medical …

Wideband Spectrum Sensing For Cognitive Radio Using Under-Sampled Successive Approximation Adc, Aziza I. Hussein

Effat Undergraduate Research Journal

The radio spectrum, an inherently limited resource, has been increasingly utilized owing to the recent exponential growth of wireless services. This has led to a new approach, termed cognitive radio, predicated upon exploitation of spectrum holes for omnipresent spectrum utilization. This is made possible via cognitive radio networks’ employment of spectrum sensing. Wideband spectrum sensing has been the focal challenge point in cognitive radio technology, since existing techniques are reliant on analog to digital converters (ADC) with sampling at the Nyquist rate. Unfortunately, in order to perform digitization of wideband RF signals at the Nyquist rate, a very high sampling …

Fault Detection In Analog Vlsi Circuits Based On Artificial Intelligence

Effat Undergraduate Research Journal

In thepastdecade,artificialintelligence(AI)hasbeenonthe rise asatooltobeutilizedacrossallthefieldsavailableintheindustry. Specificallyinthemicroelectronicsfield,exploringthecurrentoptionsof VLSI faultdetectionandtheirtypesiscrucialforadvancementandis importantinidentifyingwhetherthereisroomforimprovementorthe optimumisalreadybeingdone.Therefore,thepurposeofthisresearch is tocompareandcontrastbetweenVLSIfaultdetectionindigitaland analog circuitsusingAI.Techniquestoimproveefficiencysuchastrou- bleshootinginsmallsegmentsratherthanthewholesystemandsome resolutions todrawbacksthataren’tdetectibletohumansliketimingare discussed andresolvedinthispaper.Moreover,somenon-idealitiesand risks likemarginalstabilitywereconsidered.Finally,presentelements that areusedintoday’sfaultdetectioncircuitslikeneuralcontrollers and theANNswerediscussedaswell.Currently,theANNsarethemost utilized toolforfaultdiagnosesanddetection;however,forthecontinu- ation ofthistechnology’sgrowth,developersneedtofindmoreefficient methodstomovepastit.

Evaluation Of The Performance Of The Traveling Wave Differential Element In Protective Relays, Niranjan Kc

Master's Theses

This thesis evaluates the dependability, security, and limitations of the traveling wave differential protection function (TW87) in modern time-domain-based protective relays, using a combination of simulations and hardware testing in a laboratory environment. Fault transients are first generated using the electromagnetic transients program model of a real, 230 kV, 65.7 km long overhead transmission line, which are then played back on real time-domain-based protective relays. Various fault scenarios are chosen to evaluate the impacts of factors such as fault inception angle, distance to fault from line terminals, fault type, fault impedance, and external faults on the relay functions’ performance. Results …

Developing Deep Learning Methods For Cognitive Impairment Detection Based On Non-Invasive Data, Muath Alsuhaibani

Electronic Theses and Dissertations

Cognitive impairment detection is on the rise to help reduce the burden of healthcare costs on institutions and individuals. Mild Cognitive Impairment (MCI) is an early stage of cognitive decline progressing to Alzheimer’s disease (AD) or AD-related Dementia (ADRD). Detecting the early stages of AD/ADRD is crucial for early interventions among older adults to mitigate cognitive decline over time. However, the current diagnostic methods are often costly and/or invasive, such as MRI and PET scans. Thus, the search for non-invasive and cost-effective screening tools for the early detection of cognitive impairment using speech, language, visual, and motor data is growing. …

Response Of Dynamic Processes With Control Implemented On A Noisy Quantum Computer, Shilpa Narashimhan, Dominic Messina, Henrique Oyama, Helen Durand

Chemical Engineering and Materials Science Faculty Research Publications

A major challenge to determining the applicability (and potential outperformance over classical computers) of a quantum computer (QC) within chemical manufacturing processes is quantum noise. Computations by a QC are error-prone due to the influence of quantum noise inherent to the hardware. Errors in control inputs may destabilize a chemical process and lead to unsafe conditions for manufacturing personnel and the environment. The response of a process with control implemented on a QC to errors due to noise must be investigated thoroughly. In this work, the impacts of control input errors due to quantum noise on a process are modeled …

Tools To Design Algorithms For Implementing Control Over Quantum Computers, Shilpa Narashimhan, Jihan Abou Halloun, Kip Nieman, Helen Durand

Chemical Engineering and Materials Science Faculty Research Publications

Quantum computers (QCs) may find future applications within control systems that operate manufacturing processes. For application within control engineering, quantum algorithm development must be led by control engineers. However, control engineers may face challenges in designing quantum algorithms for control engineering problems. In this work, we provide several path-finding studies that leverage engineering tools such as optimization, encryption, and computational "short-cuts" toward making algorithm design for QC easier for control engineers.

Design And Evaluation Of An Electromagnetic Band Gap Structure For Self-Interference Reduction In Mmwave Full-Duplex Systems, Adewale Kehinde Oladeinde

Dissertations and Theses

Full-duplex (FD) wireless is a new technology that allows a device to transmit and receive at the same time and on the same frequency band. It has the potential to double the capacity and spectral efficiency of a wireless link compared to the family of conventional half-duplex wireless systems. The key challenge in implementing FD wireless communication is self-interference (SI): a node's transmitting signal generates significant interference to its receiver. Several previous studies have demonstrated the potential to reduce SI and develop FD radios; however, these studies are mostly limited to sub-6 GHz systems. Previous and on-going research explored various …

Multi-Layered Framework For Llm Hallucination Mitigation In High-Stakes Applications: A Tutorial, Sachin Hiriyanna, Wenbing Zhao

Electrical and Computer Engineering Faculty Publications

Large language models (LLMs) now match or exceed human performance on many open-ended language tasks, yet they continue to produce fluent but incorrect statements, which is a failure mode widely referred to as hallucination. In low-stakes settings this may be tolerable; in regulated or safety-critical domains such as financial services, compliance review, and client decision support, it is not. Motivated by these realities, we develop an integrated mitigation framework that layers complementary controls rather than relying on any single technique. The framework combines structured prompt design, retrieval-augmented generation (RAG) with verifiable evidence sources, and targeted fine-tuning aligned with domain truth …

Beyond Single Metrics: A Holistic Benchmarking Framework For Low-Power Embedded Systems, Hassan Adam

UNLV Theses, Dissertations, Professional Papers, and Capstones

Modern embedded systems encounter a notable challenge in evaluation. While devices may meet traditional benchmarks, they often underperform in real-world applications due to neglected interactions at the system level. Current benchmarking suites, such as MLPerf Tiny and EEMBC ULPMark, evaluate specific metrics including computational throughput, energy efficiency, and memory usage. However, they do not consider the complex interdependencies that affect real-world performance. This thesis presents a benchmarking framework that concurrently evaluates multiple performance dimensions under realistic workloads, revealing system behaviors that are often hidden in conventional benchmarks.Through the comprehensive evaluation of three representative algorithms: Fast Fourier Transform, quantized neural network …