Digital Commons Network^™

Parallel Computer Needs At Dartmouth College, David Kotz, Fillia Makedon, Matt Bishop, Scot Drysdale, Don Johnson, Takis Metaxas

Computer Science Technical Reports

To determine the need for a parallel computer on campus, a committee of the Graduate Program in Computer Science surveyed selected Dartmouth College faculty and students in December, 1991, and January, 1992. We hope that the information in this report can be used by many groups on campus, including the Computer Science graduate program and DAGS summer institute, Kiewit's NH Supercomputer Initiative, and by numerous researchers hoping to collaborate with people in other disciplines.

We found significant interest in parallel supercomputing on campus. An on-campus parallel supercomputing facility would not only support numerous courses and research projects, but would provide …

Primality Testing, Per Brinch Hansen

Electrical Engineering and Computer Science - Technical Reports

This tutorial describes the Miller-Rabin method for testing the primality of large integers. The method is illustrated by a Pascal algorithm. The performance of the algorithm was measured on a Computing Surface.

Sequential And Parallel Discrete Event Simulation On Computer Communication Networks, Tao Zhou

Masters Theses

This thesis presents the discrete event simulation technique on the network design, focusing on the methodology, modeling and implementation. The developed technique is suitable for the analysis of any store-and-forward computer communication networks with any level of complexity. The proposed generic simulation model can be used to test the architectures and protocols of existing networks and networks being designed. In implementation of the sequential discrete event simulation, an object-oriented programming strategy is applied to the network simulation using the C++ language. The parallel discrete event simulation is introduced to solve the problem of long time execution of the sequential simulation …

Design Of A Laboratory Computer Interface, Douglas L. Durand

Theses and Dissertations

An interface for the LSI-11 computer was designed and implemented so that the computer supports data acquisition, data reduction, and equipment control. The design includes both hardware and software and addresses both parallel and serial input/output (I/0). The serial interface's hardware is simply a Serial Line Unit card. This card plugs into the LSI-11 bus and provides the signals necessary to interface EIA RS-232 compatible devices. A software utility was developed to allow communication with the serial device and to allow exchange of data files. Routines were written to allow serial I/O through a FORTRAN program. The interface's parallel hardware …

Graphical Image Persistence And Code Generation For Object Oriented Databases, Subrata Chatterjee

Theses

Attached is the detailed description of the design and implementation of graphical image persistence and code generation for object oriented databases. Graphical image persistent is incorporated into a graphics editor called OODINI. OODINI creates and manipulates graphical schemas for object-oriented databases. This graphical image on secondary storage is then translated into an abstract, generic code for dual model databases. This abstract code, DAL can then be converted into different dual model database languages. We provide an example by generating code for the VODAK Data Modeling language. It is also possible to generate a different abstract language code, OODAL from a …

Future Research Directions In Problem Solving Environments For Computational Science, Stratis Gallopoulos, Elias N. Houstis, John R. Rice

Department of Computer Science Technical Reports

No abstract provided.

Stabilty Conditions For Some Multiqueue Distributed Systems: Buffered Random Access Systems, Wojciech Szpankowski

Department of Computer Science Technical Reports

No abstract provided.

Wright State University College Of Engineering And Computer Science Bits And Pcs Newsletter, Volume 8, Number 5, May 1992, College Of Engineering And Computer Science, Wright State University

BITs and PCs Newsletter

A six page newsletter created by the Wright State University College of Engineering and Computer Science that addresses the current affairs of the college.

Computer Science Education At Wku, Malcolm Stallings

Mahurin Honors College Capstone Experience/Thesis Projects

No abstract provided.

Ua66/3/2 Computer Science Alumni Newsletter, Vol. 7, Wku Computer Science

WKU Administration Documents

Newsletter created by WKU Computer Science for alumni of the program. This issue includes course offerings, computer lab diagram and an alumni survey.

Design Of Backpropagation Neural Network Architectures Using A Decision Tree Classifier, B. M. Van Horn, D. C. St. Clair

Computer Science Technical Reports

The backpropagation neural network algorithm is a popular machine learning methodology. One difficulty with using the algorithm is that the network architecture must be designed before learning can occur. This includes deciding the number of layers, the number of nodes in each layer, and the number of connections. Traditionally this problem is solved by heuristics gained by an expert through experience.

This paper presents an algorithm for using ID3 decision trees to design the network architecture. Previous approaches rely on binary decision trees. The proposed technique utilizes n-ary trees. These trees are easier to understand, are better suited for continuous-valued …

Optimizing Accuracy And Generalization In Numeric Classification Systems, M. D. Walters, D. C. St. Clair

Computer Science Technical Reports

Classifier systems are knowledge-based learning algorithms that take training instances as input and produce a set of rules as output. The classifier systems focused on in this paper represent the knowledge they learn in the form of decision trees, and are built upon Quinlan's [ 1986] inductive algorithm ID3.

The ID3 algorithm suffers from the inability to easily and effectively handle domains with numeric-valued attributes. Numeric attributes are those whose values are taken from a continuous domain or from a domain with a large number of discrete values. A number of approaches have been developed for extending ID3 to handle …

The Identification And Processing Of Don't-Care Attribute Values In Id3 Decision Tree Construction, P. D. Dorr, D. C. St. Clair

Computer Science Technical Reports

ID3 is most successful when used with sets of training and testing data that contain no missing attribute values. Many times, however, real-world domains have attributes with missing values. Sometimes these attribute values may not be needed to classify an instance. Such attribute values are called don't-care attribute values. In other cases, the values are needed but are unavailable. These values are called unknown attribute values. This paper describes the difference between unknown and don't-care attribute values and discusses several ways of identifying don't-care attribute values in ID3. Numerical results are described which validate the practicality of these approaches.

Network Key Management In A Large Distributed Environment, J. J. Stapleton, D. C. St. Clair

Computer Science Technical Reports

The technique of using encryption for protecting information in a network environment involves managing encryption keys within that same network. In large distributed networks the goal of achieving a secure environment requires a secure method of performing network key management. Network security, system security, and application security by means of data encryption rely on encryption keys remaining secret.

Both international and domestic standards organizations such as the International Organization for Standardization (ISO), the American National Standards Institute (ANSI), and the National Institute of Standards and Technology (NIST) address the issues of encryption through various standards. However, these standards discuss methods …

Deterministic Approximations To Co-Production Problems With Service Constraints And Random Yields, Gabriel R. Bitran, Thin Yin Leong

Research Collection School Of Computing and Information Systems

Production planning problems where multiple item categories are produced simultaneously are examined. The items have random yields and are used to satisfy the demands of many products. These products have specification requirements that overlap. An item originally targeted to satisfy the demand of one product may be used to satisfy the demand of other products when it conforms to their specifications. Customers' demand must be satisfied from inventory. The problem is formulated with service constraints and a near-optimal solution is provided to the problem with a fixed planning horizon. Simple heuristics are proposed for the problem solved with a rolling …

The Development And Application Of Testing Techniques In An Object-Oriented Paradigm, Robert F. Kozal

Masters Theses

This thesis is the study of testing object-oriented programs. Aspects of object-oriented programs for which testing techniques are developed include classes, methods, inheritance, polymorphism, and encapsulation. The application of these techniques are illustrated, and a comparison between traditional testing techniques and object-oriented techniques is also drawn.

A Vml Based Implementation Of A Neural Network Library On General Purpose Parallel Processors, H. Byun, S. K. Kortesis, Elias N. Houstis

Department of Computer Science Technical Reports

No abstract provided.

Wright State University College Of Engineering And Computer Science Bits And Pcs Newsletter, Volume 8, Number 4, April 1992, College Of Engineering And Computer Science, Wright State University

BITs and PCs Newsletter

An eight page newsletter created by the Wright State University College of Engineering and Computer Science that addresses the current affairs of the college.

A Survey Of Computer Use In Occupational Therapy Fieldwork Sites, Martha E. Parks

Masters Theses

Eighty-three Western Michigan University occupational therapy fieldwork sites were surveyed to determine: (a) extent of computer use, (b) diagnostic categories with which computers are used, (c) extent of computer knowledge of registered occupational therapists (OTRs), and (d) adequacy of computer knowledge of fieldwork students. Forty-seven (56.6%) of the 83 surveys were returned. OTRs at 36 (76.6%) of the 47 sites currently use computers. Word processing is the most common way in which these OTRs use computers. The most common clinical use of computers is perceptual/motor assessment and treatment, while the most common research use of computers is for report writing. …

Feature Extraction And Classification Of Flir Imagery Using Relative Locations Of Non-Homogeneous Regions With Feedforward Neural Networks, Kevin L. Priddy

Theses and Dissertations

The classification of forward looking infrared (FLIR) imagery is explored using Gabor transform decomposition and relative locations of non- homogeneous regions combined with feedforward neural networks. A feature saliency metric is developed from a Bayesian sensitivity analysis of feedforward neural networks. This metric is then used to reduce the dimensionality of the feature vectors used to identify FLIR imagery without any degradation of classification accuracy. Several system architectures are developed using a roving window combined with a series of Gabor filters to produce feature vectors for presentation to a neural network classifier. One architecture uses the Gabor filter coefficients to …

Integrated Symbolic-Numeric Computing In //Ellpack: Experiences And Plans, Sanjiva Weerawarana, Ann C. Catlin, Elias N. Houstis, John R. Rice

Department of Computer Science Technical Reports

No abstract provided.

Wright State University College Of Engineering And Computer Science Bits And Pcs Newsletter, Volume 8, Number 3, March 1992, College Of Engineering And Computer Science, Wright State University

BITs and PCs Newsletter

An eight page newsletter created by the Wright State University College of Engineering and Computer Science that addresses the current affairs of the college.

Hardware-Verification Through Logic Extraction, Michael A. Dukes

Theses and Dissertations

A Prolog-based system is described which employs logic-extraction to perform hardware-verification. The extraction rules are built automatically from hierarchical structural VHDL models, enabling the equivalence of a structural VHDL description and a layout specification to be verified. Pin-to-pin critical- path analysis is performed within the logic-extraction process; many noncritical paths are pruned early, making pin-to-pin critical path analysis of large circuits feasible. It is demonstrated that a design methodology based on logic extraction, VHDL, and a layout tool can provide a fabricated functionally- correct IC design without circuit-level or switch-level simulation. This methodology is shown to be practical for VLSI …

Boolean Reasoning And Informed Search In The Minimization Of Logic Circuits, James J. Kainec

Theses and Dissertations

The minimization of logic circuits has been an important area of research for more than a half century. The approaches taken in this field, however, have for the most part been ad hoc. Boolean techniques have been employed to manipulate formulas, but not to perform symbolic reasoning. Boolean equations are employed principally as icons; they are never solved. The first objective of this dissertation is to apply Boolean reasoning systematically and uniformly to the minimization problem. Boolean reasoning entails the reduction of systems of Boolean equations to a single equation; the single equation is an abstraction, independent of the form …

An Examination Of Hypercube Implementations Of Genetic Algorithms, Andrew Dymek

Theses and Dissertations

Genetic algorithms are stochastic search algorithms which model natural adaptive systems. In support of the development of a genetic search package for AFIT's iPSC/2 Hypercube, this study focused on two problem areas associated with hypercube implementations. Premature convergence occurs when the population becomes dominated by locally optimal, but globally inferior, solutions. Based on an examination of past hypercube implementations, the selection and communication strategies were hypothesized as causes of premature convergence. Experiments to test these hypotheses were conducted on Rosenbrock's saddle, a function often associated with premature convergence. Communication of best solutions led to premature convergence in small population sizes, …

Development Of A Flight Information System Using The Structured Method, Yeong-Lae Kwak

Theses and Dissertations

This thesis documents the development of a database system for the Flight Information System (FIS) of the Korean Air Force. The scope of the FIS is too large to be covered by this thesis. Thus, this thesis covers only the core part of the FIS due to the limitation of time and man-power. This thesis uses the structured method. Structured analysis and structured design techniques are mainly used two techniques. This thesis focused not only the development of the FIS but also the application of the software development method, the structured method, and its tools such as DFD, DD, ERD, …

Satool Ii: An IdefO Case Workbench Using Ada And The X Window System, Betty Topp

Theses and Dissertations

The objective of this research effort is to perform an object oriented analysis, design and implementation of the graphical user interface (GUI) for the SATool II system. SATool II is a computer Assisted Software Engineering (CASE) workbench developed using Ada and the X Window system. It is designed to serve as an IDEFo graphical project editor and data dictionary editor. IDEF₀ is the ICAM Definition Method Zero graphical notation language adopted by the Air Force to produce a function model of a manufacturing system or environment. The Air Force Institute of Technology is conducting on-going research in the use …

Implementation And Analysis Of Np-Complete Algorithms On A Distributed Memory Computer, Joel S. Garmon

Theses and Dissertations

The purpose of this research is to explore methods used to parallelize NP-complete problems and the degree of improvement that can be realized using different methods of load balancing. A serial and four parallel A* branch and bound algorithms were implemented and executed on an Intel iPSC/2 hypercube computer. One parallel algorithm used a global, or centralized, list to store unfinished work and the other three parallel algorithms used a distributed list to store unfinished work locally on each processor. the three distributed list algorithms are: without load balancing, with load balancing, and with load balancing and work distribution. The …

Causal Univariate Spatial-Temporal Autoregressive Moving Averages (Starma) Modelling Of Target Information To Generate Tasking Of A World-Wide Sensor System, Kelly A. Greene

Theses and Dissertations

The Department of Defense employs a resource limited world-wide sensor system to detect certain events of interest. The purpose of this research was to establish a methodology using a univariate causal STARMA model for forecasting the relative probability of an event occurring in a geographical location during a time block of the day. These relative probabilities are used as input for a tasking model that assigns the scarce sensor resources so as to optimize the detection of these events. The STARMA model is appropriate for forecasting the relative probabilities because a definite temporal relationship and a definite spatial relationship exists …

Reservable Transactions: An Approach For Reliable Multidatabase Transaction Management, Ahmed K. Elmagarmid, Jin Jing, James G. Mullen, Jamshid Sharif-Askary

Department of Computer Science Technical Reports

No abstract provided.