Digital Commons Network^™

Surface Reaction And Transportation Of Radium-226 In Marine Systems, Jiusi Wang

All Dissertations

Historical uses of radium (Ra)-containing self-luminous paint, such as on gauges and dials in naval ships, have led to the potential for such paint, and thus Ra, to be released into the marine environment. Radium-226 (²²⁶Ra) behavior in marine systems is not fully described in the literature, presenting a knowledge gap in the process of evaluating potential ecological impact of Ra in marine systems. This study explores various mechanisms contributing to Ra environmental transport in marine systems on a laboratory scale, including leaching, sorption, and diffusion. ²²⁶Ra leaching from watch hand dials containing radioactive luminous paint is …

Advancing Life Cycle Assessment Of Mass Timber: Environmental Performance, Circular Design And End-Of-Life Strategies, Muzan Williams Ijeoma

All Dissertations

Mass timber has emerged as a leading candidate for low-carbon construction, offering the dual benefits of reduced embodied emissions and biogenic carbon storage. Yet, fully realizing its sustainability potential requires a comprehensive and context-specific understanding of its environmental performance across the entire life cycle, from raw material production to building operation and beyond end-of-life (EoL). This dissertation advances life cycle assessment (LCA) practices for mass timber by addressing critical challenges across multiple phases of its life cycle. This dissertation is comprised of three published papers, and two submitted manuscripts. First, I conducted a critical review and meta-analysis of mass …

Modeling Flood Risks For Small-Scale Coastal Watershed Across Shared Socioeconomic Pathway Scenarios, Sebastian Loschner

Graduate Theses and Dissertations (2019 - present)

Coastal flooding, driven by the mixture of natural processes and human activities such as precipitation, waves, sea level rise, and urbanization, remains a growing concern. While recent flood-risk studies use IPCC's Shared Socioeconomic Pathways with climate projections to assess future flood exposure, smaller coastal watersheds, < 120,000 acres, remain insufficiently studied. Projected sea level rise is expected to intensify these impacts in smaller systems, potentially causing more severe flooding than reported for larger watersheds. To address this gap, this study used the SRH-2D model integrated with Aquaveo's Surface-water Modeling System to simulate flooding in the lower Fish River basin, Alabama. A coastal watershed sensitive to both riverine and tidal influences. Simulations tested different sea levels based on SSP scenarios corresponding to low, moderate, and high emissions for the years 2050 and 2100. Results indicate that the midcentury scenarios remained even in inundation extent and volume, between 9.9-10.4% compared to the 2020 baseline, the latter scenarios had a wider range in results of between 25.9-50.3% compared to the same baseline. Across scenarios, the most vulnerable and inundated areas of the smaller coastal watershed were the narrow points where upstream flow convene with downstream backwater. These findings highlight the need for futuristic location-specific flood mitigation strategies.

Occurrence Of Per And Polyfluoroalkyl Substances In Rural Wastewater Treatment Plants And Comparison To Large Treatments Plants, Madeleine Rauhauser

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Per and polyfluoroalkyl substances (PFAS) are a class of compounds defined by their carbon – fluorine bonds, which are incredibly strong. The strength of this bond makes these compounds very useful industrially, they are used as waterproof and grease proof coatings, and as fire retardants. The same thing that makes them useful industrially makes them incredibly recalcitrant in the environment, it is difficult to destroy these compounds. PFAS are also suspected to cause health impacts in people, such as kidney cancer and low birth weights. Wastewater has been commonly identified as a contributor to the amount of PFAS in the …

Accident Data Analytics And Ai-Based Auditory Enhancement For Highway Construction Safety, Thinh Nguyen

All Dissertations

This research develops data-driven and AI-enhanced approaches to improve worker safety in highway construction environments. The study integrates advanced analytics and auditory signal enhancement to identify high-risk worker behaviors and improve real-time safety warnings. The work consists of three core studies. The first study applies Sequential Pattern Mining and Social Network Analysis to more than 1,000 construction accident reports to identify high-risk worker actions and their hidden sequential relationships with accident types and consequences. These insights reveal sector-specific risk patterns, supporting the creation of targeted, data-informed safety interventions. The second study introduces an AI-based auditory enhancement model built on a …

Enhancing Management Of Transportation Projects: Integration Factors For Using Smart Contracts, Mariam Elazhary, Islam H. El-Adaway

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The US Department of Transportation (USDOT) delivers a wide range of infrastructure projects, backed by a fiscal year 2023 budget exceeding $100 billion. These projects face mounting pressures to meet performance, accountability, and delivery standards, driven by their dependence on public funding and their operational complexity. Transportation infrastructure presents sector-specific challenges - such as time-sensitive user disruptions, multiparty coordination, and asset intersection risks - that demand more robust, automated, and transparent project delivery mechanisms. Blockchain-enabled smart contracts have emerged as a promising solution to address these operational pain points through real-time automation, immutable data records, and decentralized transaction processing. However, …

Data-Driven Evaluation Of Sustainable Waste-To-Energy Pathways For Intelligent Urban Systems, Izech Brian O. Edwin, King Harold A. Recto

Electronics, Computer, and Communications Engineering Faculty Publications

The handling of municipal solid waste (MSW) in swiftly urbanizing Philippine cities poses intricate energy and governance challenges. In Baguio City, reliance on landfills has reached critical levels due to diminishing capacity, rising transport costs, and opposition to trash transfers by nearby LGUs. Although shaped by unique topographical and governance constraints, Baguio’s situation reflects issues faced by other rapidly growing Philippine cities; therefore, analyzing it offers insights for national MSW decision-making. This study applies a triple bottom line (TBL) framework to assess three management scenarios: (1) Status Quo, where all MSW is landfilled with no energy recovery; (2) Landfill with …

Private Sand Mining In The Mississippi River: Sediment Budget And Morphology Implications Between Baton Rouge And Belle Chasse, Louisiana, Brett Mcmann

LSU New Orleans Theses and Dissertations

This analysis examined how private sand mining within the Mississippi River between Baton Rouge, LA and Belle Chasse, LA affected its sand budget from 2004-2012.

Records assembled indicated that private mining removed an annual average of 2.8 million cubic yards of sand. A HEC-RAS one-dimensional sediment transport model was utilized to assess this practice. Three scenarios were simulated: a baseline without mining, conditions reflecting documented mining rates, and a hypothetical case with excessive extraction.

Results suggest that private mining constituted approximately 26 percent of the total sand deficit between Baton Rouge and Belle Chasse. Mining appeared to cause localized changes …

Experimental Determination Of Modulus Of Rupture For Concrete Masonry Beams And Implications For The Tms 402/602 Code, Shreedhar K C

All Theses

Currently, the experimental database for Modulus of Rupture (MOR) of masonry beams is limited, and current provisions in TMS 402/602-22 use the MOR values from wallette tests. The primary goal of this research is to experimentally determine the parameters that influence MOR. The secondary goal of this work is to compare the MOR values from beam and bond wrench tests obtained in this study with each other as well as with values published in the literature. The standard ASTM E518 test was used for determining MOR values for beams, and a modified approach to ASTM C1072 that nullifies the eccentricity …

Life Cycle Assessment Of A Prefabricated Modular Timber Building, Bryan Mai

Construction Management

Traditional concrete construction carries a high carbon footprint, motivating interest in lower-impact alternatives such as prefabricated modular timber systems. This project conducts a process-based life cycle assessment (LCA) using OpenLCA to evaluate the environmental impacts of a modular timber building. Material quantities from major processes were modeled as flow inputs and converted into standardized OpenLCA units. Impact categories—including acidification potential, human toxicity, and energy/resource use—were analyzed to determine which materials and processes contribute most to overall environmental burden. Results show that transportation and plumbing materials drive the largest acidification impacts, while interior finishes dominate human toxicity. This LCA establishes a …

Concrete Masonry Unit Construction: Creating Educational Modules On Sustainability, Eric Dam

Construction Management

Concrete Masonry Units are one of the most widely used building materials due to their durability, fire resistance, low maintenance, and specifications. With the growing trend for sustainable construction, it is necessary to teach students how CMUs can contribute to improving environmental performance and dive deeper into multiple resource efficiency. This project developed an instructional module that introduces CMU materials, reviews performance and durability attributes of these materials, and how they are linked to well-known rating systems. The final module includes a presentation, three assignments, and one quiz that will reinforce student learning and refresh industry professionals' knowledge. The following …

Exploring Transformative Learning Experiences In Engineering Doctoral And Post-Doctoral Education: Developing Non-Technical Competencies For Early-Career Academic Roles, Ibukunoluwa Eunice Salami

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

This dissertation explores the transformative learning experiences that early-career engineering faculty recounted from their doctoral and postdoctoral training and how these experiences shaped the development of non-technical competencies essential for academic success. Grounded in Mezirow’s Transformative Learning Theory (TLT) and the Competency-Based Professional Development Framework (CBPDF), the study examines how reflection and shifts in frames of reference supported competency growth and faculty readiness. A qualitative holistic single-case study design was employed. Data sources included semi-structured interviews with early-career engineering faculty and program learning objectives drawn from graduate handbooks. Data analysis was both deductive and inductive guided by Mezirow’s ten phases …

Large-Scale Experimental Study On The Impact Of Air Cleaning & Ventilation On Indoor Air Quality And Student Illness-Related Absenteeism, Daud Nosham

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

This large-scale randomized experimental field study investigated the effect of portable air purifiers (PAPs) on classroom’s air quality and student’s illness related absenteeism. PAPs were installed in 317 classrooms from various school districts located in Eastern Nebraska. The classrooms were randomly assigned into four conditions: three treatment conditions (T1, T2 & T3) and one control condition (device without any filter). T1 was equipped with HEPA filters, T2 added Activated Carbon (AC) layer to HEPA, and T3 further integrated Germicidal Ultraviolet (GUV) alongside HEPA and AC filters. The measured variables were carbon dioxide (CO2), fine particles (PN2.5) and coarse particles (PNcoarse), …

Building Kit For K-8 Education: An Introduction To Construction Fundamentals, Marc Joynt

Construction Management

Introducing construction concepts to young students requires tools that are both engaging and easy to use, which led to the development of a laser-cut building kit designed for K–8 classrooms. The process began with hand-drawn sketches to establish a simple, age-appropriate structure. The design was then modeled in AutoCAD, where each individual component was drafted for fabrication. After completing the digital model, the files were transferred into Rhino and organized by layer to ensure accurate communication with the laser cutters used to produce the final basswood pieces. Throughout the project, challenges such as material limitations, tolerance adjustments, and simplifying complex …

Investigating The Correlation And Synergy Of Artificial Intelligence Techniques, Construction Technologies, And Their Key Benefits, Fareed Salih, Islam H. El-Adaway

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Despite its reputation as one of the least digitized sectors, the construction industry increasingly adopts artificial intelligence (AI) and construction technologies. However, previous research has not adequately explored the benefits of AI techniques and construction technologies nor the correlations between them. This study aims to fill this knowledge gap. To this end, the authors used a multistep research methodology. First, a systematic literature review of studies published between 1985 and 2022 was conducted to identify AI techniques and construction technologies. Second, content and frequency analysis were performed to determine the benefits associated with AI and technology adoption. Finally, a survey …

Bond Behavior Of Full-Scale Beams Using Sustainable Self-Compacting Concrete, Hayder H. Alghazali, Atheer H.M. Algburi, John J. Myers

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Sustainable concrete is a step towards greener and more eco-friendly concrete construction practices, helping to solve global environmental problems. The present study focuses on the bond behavior between steel reinforcement and greener self-compacting concrete, specifically sustainable self-compacting concrete (SUS-SCC). Three SUS-SCC mixtures with different fly ash (FA) to cement replacement levels of [50, 60, and 70% (by mass)] were developed. Twelve full-scale SUS-SCC beams with a cross-section of (305 x 57) mm and a total length of 3048 mm were cast and tested using a four-point load test setup. The effect of longitudinal and lateral steel reinforcement ratios in the …

Friction And Texture Evaluation Of Asphalt-Based Binders As Alternatives To Epoxy-Based High-Friction Surface Treatments, Alireza Roshan, Magdy Abdelrahman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

High-friction surface treatment (HFST) is a safety-focused pavement treatment that restores and maintains pavement friction to reduce road accidents. Traditional epoxy-based HFSTs, while widely used, face challenges such as high costs, potential compatibility issues with the substrate pavement, and long-term durability under specific conditions. This study investigates asphalt-based alternative HFST, which is compatible with various pavement types and cost-effective and versatile solutions for a wider range of pavement applications. Performance and friction testing, including the British pendulum test, British wheel test, and dynamic friction test, were performed to examine the coefficient of friction (COF) before and after polishing with a …

Nonlinear Flow Structures From The Interaction Of Internal Waves With Topography, Matthew R. Klema, S. Karan Venayagamoorthy

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This paper presents numerical simulations of the interaction of first-mode internal waves with a topographic edge at the intermediate scale, O (100) m, with a focus on the evolution of flow structures. Flow structure variation and evolution is explored through direct modifications to the amplitude of the internal wave interacting with topographic features of varying wave-topographic slope (g/s), height of the topography to the total domain depth (ht/d), and the wave Froude number (Fr = U0/cph), where g is the internal wave slope, s is the topographic slope, ht is the height of the topography, d is the simulation depth, …

Identifying Influential Assets In Higher Order Interdependent Infrastructure Networks Through Population Impact, Akshat Chulahwat, Emad M. Hassan, Mersedeh Tariverdi, Miguel Nunez-Del-Prado, Hussam Mahmoud

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

A significant increase in catastrophic events worldwide has had a disastrous impact on the built environment, as these disruptive events devastate critical infrastructure lifelines, resulting in a substantial reduction of services across a community. Management of critical infrastructure assets is essential, and this can be achieved by optimal resource allocation to key assets within interconnected systems. The majority of current literature focuses on capturing the behavior of infrastructure systems individually, which presents a computational problem when dealing with complex, interdependent infrastructure systems. In this study, a comprehensive framework to evaluate a type of influence metric for ranking node and edge …

The Equity Implications Of Pecuniary Externalities On An Electric Grid, Charles Sims, Gasser G. Ali, J. Scott Holladay, Tim Roberson, Chien Fei Chen, Islam H. El-Adaway

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The adoption of rooftop photovoltaic (PV) systems can create upward pressure on retail electricity rates as utilities are forced to spread their fixed costs of generation and transmission across a smaller customer base. Since high-income households are more likely to purchase PV systems, low-income households may be disproportionately impacted by these rate increases. Using a novel combination of agent-based computational economic modeling and a choice experiment of rooftop solar adoption, we show how this pecuniary externality between low- and high-income customers increases low-income electricity bills by 10% in an area with some of the highest poverty rates in the United …

Evaluating Crumb Rubber Modified (Crm) Asphalt As A Sustainable Binder Alternative For High-Friction Surface Treatments, Abdallah Aboelela, Alireza Roshan, Magdy Abdelrahman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

High-friction surface treatments (HFSTs) are widely applied to improve pavement safety by enhancing long-term skid resistance. Although epoxy resins are commonly used due to their strength and durability, their high cost, susceptibility to delamination, incompatibility with substrates of flexible pavements, and adverse environmental concerns limit their long-term performance. This study presents crumb rubber modified (CRM) asphalt as a sustainable alternative binder for HFST applications. CRM binders offer high performance and compatibility with existing pavement surfaces, cost effectiveness and reduced environmental impacts as compared to epoxy binders. In addition, the binder development utilizes enhanced recycling technologies for interacting with used tire …

Data Driven Design Of Ultra High Performance Concrete Prospects And Application, Bryan K. Aylas-Paredes, Taihao Han, Advaith Neithalath, Jie Huang, Ashutosh Goel, Aditya Kumar, Narayanan Neithalath

Electrical and Computer Engineering Faculty Research & Creative Works

Ultra-high-performance concrete (UHPC) is a specialized class of cementitious composites that is increasingly used in various applications, including bridge decks, connections between precast components, piers, columns, overlays, and the repair and strengthening of bridge elements. The mechanical and durability properties of UHPC are significantly influenced by factors such as low water-to-binder ratios, the inclusion of supplementary cementitious materials (SCMs), and fiber reinforcement. Machine learning (ML) has been employed to predict the performance of UHPC and optimize its mixture designs by using various raw materials. This study first provides a comprehensive review of ML applications in UHPC, focusing on predicting workability, …

Enabling Scalable Camera-Based Streamflow Monitoring With Serverless Cloud Computing, Sajan Neupane

All Graduate Theses and Dissertations, Fall 2023 to Present

This thesis introduces a modern and automated method for monitoring rivers and streams using cameras and cloud-based software tools. Traditional monitoring methods often rely on sensors placed directly in the water, which can be expensive, hard to install, and difficult to maintain, especially in remote or rough terrain. In contrast, this approach uses cameras to observe water flow from a distance, offering a safer and more cost-effective alternative. However, camera systems come with their own challenges, such as collecting large amounts of image data, transferring it reliably from the field, and analyzing it quickly enough to be useful. This research …

Evaluating Use Of Multiple Hydrologic Storage Indicators To Enhance Streamflow Forecasting, Reza Morovati

All Graduate Theses and Dissertations, Fall 2023 to Present

Accurate seasonal streamflow forecasts are essential for managing water resources in the western United States, where much of the water supply depends on snow accumulation and melt. Water managers, farmers, and communities rely on these forecasts to plan for water use, prepare for droughts, and protect the environment. However, traditional forecasting methods often do not fully use all the available information about how water is stored in the landscape, such as in snowpacks, soil moisture, and groundwater. This can limit the accuracy of predictions and make water management more difficult.

This study aimed to improve streamflow forecasts by explicitly including …

Feasibility And Potential Of Electric Air Taxis For Long Distance Airport Access/Egress Trips, Atul Subedi

All Graduate Theses and Dissertations, Fall 2023 to Present

Getting to the airport is often one of the most stressful parts of a trip, especially for people who live far from the airport. In the United States, many travelers live more than an hour’s drive from a major airport, and their choices such as driving, using public transit, or paying for ride-hailing can be time-consuming, expensive, and inconvenient. A new technology, Electric Air Taxis (EATs), is being developed as a potential solution. These small, battery-powered aircraft could offer faster, cleaner, and more direct connections to airports. However, the success of EATs depends not only on the technology itself but …

Quicklime-Based Self-Healing Concrete For Bridge Deck Applications, Mehrnoosh Nazari

All Graduate Theses and Dissertations, Fall 2023 to Present

Concrete is one of the most widely used construction materials in the world. However, over time, it can crack and deteriorate, especially on roads and bridges exposed to harsh weather and deicing salts. Inspired by the long-lasting durability of ancient Roman concrete, this study explores the self-healing capabilities of concrete incorporating quicklime (calcium oxide) aggregates to extend the service life of bridge decks. For this purpose, three concrete mixtures were developed using local materials: one without quicklime (C-Q 0%) and two with 2% (C-Q 2%) and 4% quicklime (C-Q 4%). These mixtures were tested for fresh properties, strength, durability, and …

Developing Standardized Testing Datasets For Benchmarking Automated Quality Control Algorithm Performance With Aquatic Sensor Data, Ehsan Kahrizi

All Graduate Theses and Dissertations, Fall 2023 to Present

Advances in water monitoring technologies have led to a large increase in the amount of data collected from rivers, lakes, and other water systems. However, ensuring that these data are accurate and reliable remains a major challenge. Traditional data quality checks are done manually by a technician, which can be slow, inconsistent, and not practical for real-time monitoring. This research addresses these challenges by developing standardized datasets for testing computer-based methods that automatically detect and correct errors in water data. Using information from the Logan River Observatory in northern Utah, we created a step-by-step process to identify, categorize, and label …

Unveiling The Interactions Between The Antibiotic Resistome And Microplastics Influenced By Trace Elements And Ppcps In Wastewater Treatment Plants, Tahira Tasneem Rahman

All Graduate Theses and Dissertations, Fall 2023 to Present

Antibiotic resistance is a growing global concern, and wastewater treatment plants play a critical role in controlling its spread. These facilities process water containing microplastics (small plastic particles), trace elements like copper and zinc, and chemicals from everyday products like pharmaceuticals and personal care products. Together, these pollutants may contribute to the survival and spread of bacteria containing antibiotic resistance genes, but their combined effects are not fully understood. This study investigated how these pollutants behave and interact in wastewater treatment plants using two approaches: direct monitoring of real treatment plants and controlled lab experiments using synthetic wastewater. Results showed …

Development Of A Handy Tool For The Selection Of Urban Stormwater Best Management Practices, Aaron T. Kenny

Civil & Environmental Engineering Theses & Dissertations

The City of Norfolk, Virginia faces substantial stormwater management challenges due to shallow groundwater, tidal influence, dense urban development, and limited right-of-way. These constraints limit the applicability of many Best Management Practices (BMPs) and require the early identification of feasible practices before detailed hydrologic modeling. This thesis introduces a decision-support tool that quickly and systematically identifies and prioritizes BMPs that are both feasible and well-suited to Norfolk’s Municipal Separate Storm Sewer System (MS4) program, streamlining early-stage selection and saving time and resources.

The tool implements a two-stage methodology. First, feasibility gates are applied using catalog attributes derived from the Virginia …

Calibration Of Low-Cost Pm2.5 Sensors Using Data Continuously Generated At A Reference Station In El Paso, Texas, Brenda Lizbeth Hernandez

Open Access Theses & Dissertations

Low-cost sensors (LCS) offer a cost-effective way to expand air-quality monitoring networks, but they require strong calibration methods to ensure reliable performance under changing environmental conditions. In this study, Clarity LCSs were co-located with a state reference monitor for 6 months to evaluate fixed-time (2-, 3-, 4-, and 6-week) and rolling (2- and 3-week) calibration approaches. A multivariate regression model using PM1, PM2.5, PM10, and relative humidity was used to generate calibration coefficients for a “base sensor.” Data from two additional sensors were normalized to the base unit using linear regression, and their calibration coefficients were applied across the network. …