Digital Commons Network^™

Comprehensive Risk Assessment For Construction Site Managers In Kosovo: A Mixed-Method Approach, Muhamet Ahmeti, Besian Sinani

Journal of Sustainable Construction Materials and Technologies

This study developed and validated a hybrid ISO 31000:2018 Kosovo-compliant risk assessment framework tailored for construction site managers operating within transitional economies. The research employed audits of 20 ISO-certified contractors in Pristina, Kosovo, along with field observations, interviews, and quantitative risk matrices. The findings indicate a critical concentration of risk, with 70% of firms classified as "High" or “Very High” risk. The most prevalent hazards identified were working at height without collective protection, unprotected electrical systems, and manual handling of heavy materials. Regression analysis revealed that firms with a designated safety champion achieved significantly lower risk scores, whereas those with …

Behaviour Of Internally Strengthening Hollow Stainless-Steel Hot-Rolled Circular Columns Filled With Crumb Rubber And Recycled Aggregate Concrete, Wadhah M. Tawfeeq, Mohammed M. Rasheed, Mithaq Kohees, Ahmed W. Al Zandd, Saif Al-Balushi, Hamed Al Abdul Salam

Journal of Sustainable Construction Materials and Technologies

Stainless-steel sections are increasingly being utilised in favour of their higher durability. Simultaneously, the use of recycled materials in concrete is aligned with the global concern to encourage sustainable and environmentally friendly construction. The paper examined the behaviour of stainless-steel columns filled with concrete with crumb rubber (CR) and recycled aggregate (RA). It analysed the effect of different percentages of CR (0, 15, and 30) and RA (0, 15, and 50) on the compressive strength of the concrete and the performance of the columns using stainless-steel hollow sections. 20 specimens were manufactured, 18 of which were cast with concrete containing …

Piezoelectric Concrete: A Smart Material Approach For Energy-Harvesting Structural Technologies, Dianah Mazlan, Vynotdni Rathinasamy, Naveen Kumar, Liu Chunpeng, Elango Elango

Journal of Sustainable Construction Materials and Technologies

The rapid growth of urban infrastructure demands innovative materials that not only support structural performance but also contribute to sustainability through energy harvesting. Piezoelectric concrete, which integrates ceramics, polymers, nanomaterials, and bio-based fillers into cementitious matrices, has emerged as a promising solution. This review systematically explores the fundamentals of piezoelectricity in concrete, highlighting how stress-induced electromechanical coupling enables both energy harvesting and structural health monitoring. The paper critically evaluates major material systems including PZT ceramics, PVDF polymers, hybrid nanocomposites, and emerging bio-based materials, alongside their integration strategies such as embedded and surface-mounted approaches. Applications across pavements, bridges, and smart buildings …

Design And Evaluation Of The Influence Of Mutual Induction On Microbial Electrolysis Cell Performance And Biogas Production, Ashley L. Blackwell

Civil Engineering ETDs

Microbial electrolysis cells (MECs) present a pathway for energy recovery in wastewater treatment by converting organic substrates into methane or hydrogen. Traditional MEC designs typically rely on physical electrode contacts and expensive materials, which restrict their scalability. This study introduces the first induction-based MEC that uses mutual inductance between an external copper wrap and an internal coil to generate a fluctuating electrical potential, removing the need for expensive electrodes. The induction-stimulated reactor showed faster total organic carbon removal and a higher CH4/CO2 ratio compared to a conventional anaerobic digester, indicating improved carbon-to-methane conversion, although total gas yield remained similar. Microbial …

Geologic And Geochemical Investigation Of The Ruby Graphite Deposit, Mikayla Taylor

Graduate Theses & Non-Theses

The Ruby Graphite project (RGP, also known as the Crystal Graphite deposit) is located in the southern Ruby Mountains, Beaverhead County. The deposit contains coarse-grained and highly crystalline graphite, which is a sought-after critical commodity in today’s global economy. The graphite is hosted by high-grade meta-sedimentary and meta-igneous rocks that reached peak metamorphism during the ~ 1.7 Ma Big Sky Orogeny. In this study, samples were collected from outcrops, mine dumps, and new (2023) drill core from the Ground Hog and Bird’s Nest locations. Rock types include calcitic marble, biotite-garnet schist, pegmatite, diopside-rich skarn, altered ultramafic intrusions, and a possible …

Evaluating Three Lightweight Airfield Matting Systems Under F-35b Aircraft Loading, Brett D. Cobb

Theses and Dissertations

Aircraft matting has been in service since WWII. It has provided a maneuverable substrate to allow aircraft forward operations to take place in austere environments. AM2 is the main matting system that has been used for generations. In recent years, the need for a lightweight matting system has come to the forefront of the matting community. This is not only to improve the maneuverability, but also the shipping restrictions. This research is on three different light weight matting systems above subgrade with two CBR values (i.e., 6 and 25). A specially designed load cart was adopted to simulate F-35B loading. …

Quantifying Benefits Of Biochar With Variable Absorption Capacity As A Partial Cement Replacement In Concrete, Benjamin Shannon

Theses and Dissertations

Extensive research has been conducted on biochar-incorporated concrete. However, no concrete mixture design guideline is currently available for implementing biochar incorporation in practice. The objective of this study was to correlate biochar absorption capacity with the compressive strength of biochar-incorporated concrete, to quantify the benefits of biochar and develop mix design guidelines. Biochar with varying absorption capacities was incorporated into concrete at 10%, 20%, and 40%. Strength and moisture loss were recorded over the 90-day curing period of the biochar-incorporated concrete. Results revealed three main findings: (1) in 10%, 20%, and 40% biochar mixes, the normalized strengths ranged from 0.65–0.85, …

Analysis Of Trends From Mass Concrete Case Studies, Bradford Songer

Theses and Dissertations

While conventional mass concrete is well understood, high strength and ultra high performance concrete present unique challenges when placed in large volumes. This thesis compiles and analyzes thermal data from mass high strength and ultra high performance concrete placements collected over the past eight years by the U.S. Army Corps of Engineers in support of military construction projects. The datasets span a wide range of material types and volumes. The analysis identifies trends in temperature development, temperature differentials, and the influence of mixture constituents on heat generation. This thesis contributes to the improved understanding of thermal behavior in mass concrete. …

Design And Development Of Rechargeable Cement-Based Batteries For Energy Storage Within Infrastructure, Dandan Yin

Tennessee State University Alumni Theses and Dissertations

This dissertation presented the design, fabrication, and evaluation of rechargeable cement-based batteries (CBB) for energy storage within infrastructure. The study aimed to integrate electrochemical energy storage directly into cementitious materials, enabling multifunctional and sustainable building systems. Nickel–iron electrodes and cement-based solid electrolytes to form durable, solid-state systems. The electrochemical impedance spectroscopy, cyclic voltammetry, and galvanostatic charge–discharge tests，along with microscopic testing and mechanical testing analyses, were conducted to assess battery performance. The carbon fiber mesh CBB achieved stable cycling over 100 cycles with quasi-reversible redox behavior and a maximum areal energy density of 7.6 Wh m⁻². Nickel foam electrodes, with their …

Advancing Sustainable Co2 Mitigation: Experimental And Computational Analysis Of Thermal Carbon Chitosan Sorbent For Automotive Exhaust Capture, Dalia A. Ali Dr., Amir Ahmed Elgamal Eng., Rania Rushdy Moussa Dr.

Chemical Engineering

This study investigated the efficiency of thermal carbon chitosan (TCCS) sorbent for CO2 capture from vehicle exhaust emissions within a designed adsorption system. TCCS was synthesized and meticulously characterized using a series of analytical techniques, including Brunauer-Emmett-Teller (BET) surface area analysis, Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FTIR), X-ray Diffraction (XRD), Ther- mogravimetric Analysis (TGA), Energy Dispersive X-ray Spectroscopy (EDX), and Differential Scanning Calo- rimetry (DSC). The TCCS adsorbent showed high thermal stability and a heating value (HHV) of 23.5 MJ/kg. Adsorption isotherm study demonstrated that the maximum capacity of CO2 adsorption is 0.084 kg.CO2/kg. TCCS, as well …

Time Series Modeling Of Land Use And Land Cover Classification Using Remote Sensing, Ahmed A. F. Abd El Hamed, Fawzi H. Zarzoura, Mahmoud El-Mewafi

Mansoura Engineering Journal

Understanding land use / land cover changes is essential for planning sustainable development. It represents the transformation of the land due to human activities, which is related to sustainable development that aims to achieve the needs of the present generations without affecting the future. Land use / Land cover is studied in Al Alamein region, northern Egypt, with supervised classification methods using satellite images from Landsat 8 and Sentinel - 2A in 2023 and analyzes the accuracy assessment, which shows Maximum likelihood is better in both sensors achieving overall accuracy (91.80% and 91.02%) and kappa coefficient (0.814 and 0.8799). Then …

Mechanical, Durability, And Environmental Performance Of Limestone Powder-Modified Ultra-High-Performance Concrete, Yashovardhan Sharma, Meghana Yeluri, Srinivas Allena

Civil and Environmental Engineering Faculty Publications

Ultra-high-performance concrete (UHPC) delivers outstanding durability and strength but typically relies on high Portland cement content. This study evaluates a 20% cement replacement with limestone powder (LP) in UHPC and benchmarks performance under two curing regimes: moist curing (MC) and warm bath curing at 90 degrees C (WB). Metrics include workability, compressive and flexural behavior, shrinkage, freeze-thaw resistance, chloride transport (surface resistivity, RCPT), material cost, and embodied CO2. LP improved fresh behavior: flow increased by 14.3% in plain UHPC and 33% in fiber-reinforced UHPC (FR-UHPC). Compressive strengths remained in the UHPC range at 28-56 days (approximately 142-152 MPa with LP), …

Analytical Assessment Of Pedestrian Crashes On Low-Speed Corridors, Therezia Matongo, Deo Chimba

Civil and Architectural Engineering Faculty Research

This study presents a comprehensive statewide analysis of pedestrian-involved crashes recorded in Tennessee between 2002 and 2025. We evaluated the influence of roadway, traffic, environmental, and socioeconomic factors on pedestrian crash frequency and severity with substantial components focused on lighting impacts including dark and nighttime. A multi-method analytical framework was implemented, combining descriptive statistics, non-parametric tests, regression analysis, and advanced machine learning techniques including the Adaptive Neuro-Fuzzy Inference System (ANFIS) and the gradient boosting model (XGBoost). Results indicated that dark and nighttime conditions accounted for a disproportionate share of severe crashes—fatal and serious injuries under dark conditions reached over 40%, …

Jer-2021 Assistance To The State Water Resources Research Institute Program (Year 1 Of 5) For The 104(B) Program, David Tarboton

Funded Research Records

No abstract provided.

Collaborative Research: Fair + R: Building The Future Of More Reproducible Water Research Through Community Best Practices, Software Tools, Cohort Building, And Policy Change., James H. Stagge, David E. Rosenberg, Sierra Young

Civil and Environmental Engineering Faculty Publications

This project aims to create a pathway towards a future, ten years from now, when a majority of published research across geosciences is not only FAIR (Findable, Accessible, Interoperable, and Reusable), but reproducible by a third party. Building on the Center for Open Science framework for cultural change, this project is organized around four scaffolded goals: improving infrastructure and tools, building community support, aligning incentives, and minimizing barriers to policy change. We will systematically analyze 300-500 publications from leading hydrology and water resources journal to quantify changes in reproducibility rates since 2017 and identify the tools and practices that best …

Wg-2413 Remote Sensing Of Wine-Grapevine Transpiration For Improving Vine Water Status, Alfonso Faustino Torres

Funded Research Records

No abstract provided.

Improving Profitability Of Small And Medium Sized Farms Though Economic Optimization Of Wheel-Line Irrigation, John B. Barker, Ryan A. Larsen, Matt A. Yost

Funded Research Records

No abstract provided.

Equity-Aware Natural Hazards Resilience Assessment And Improvement Of Road Networks, Naqib Mashrur

LSU Doctoral Dissertations

As climate change intensifies the frequency and severity of hurricanes, the resulting flood events pose escalating threats to transportation infrastructure and community well-being. This dissertation addresses the intersection of flood resilience, network connectivity, and social equity by integrating principles from network analysis, equity planning, and disaster resilience. The research begins by examining the social dimensions of accessibility loss during hurricane-induced flooding. Spatial and demographic analysis reveals that Native American and Hispanic populations in the case study region experience the most significant reductions in access to essential service facilities, highlighting inequities in systems.

Investigating a region southern Louisiana road network demonstrates …

Developing A Waste-To-Energy Assessment Framework Integrating Engineering And Policy Dimensions Using A Triple Bottom Line Approach, Izech Brian O. Edwin, King Harold A. Recto

Electronics, Computer, and Communications Engineering Faculty Publications

The management of municipal solid waste (MSW) in swiftly urbanizing Philippine cities has emerged as a critical concern in both energy and governance. Dependence on landfills is approaching critical thresholds as disposal sites near saturation, transportation costs escalate, and host communities increasingly resist garbage transfers. In response, this study proposes a comprehensive Waste-to-Energy (WtE) assessment framework that integrates engineering evaluation with policy and stakeholder analysis to support sustainable decision- making.

Using Baguio City as a case study, the framework applies a Triple Bottom Line (TBL) approach to evaluate three waste management scenarios: (1) current landfill-dominated practices, (2) engineered landfill with …

Water Rights Accounting And Distribution In Utah, Sarah Null, Bethany Neilson, Eileen Lukens, Eryn Turney, Utah Division Of Water Rights

Watershed Sciences Faculty Publications

This white paper summarizes how the Utah Division of Water Rights (WRi) administers water rights through the coordinated processes of water distribution and accounting. Water distribution involves apportioning divertible flow in river systems by adjusting diversions and reservoir storage. To account for and distribute water effectively, WRi must first determine the amount of water available for diversion each day, then prioritize water rights when water supply is insufficient to satisfy all demands. WRi has developed specialized tools and models to support this process.

This paper was developed through a collaboration between WRi and Utah State University to produce a report …

The Equity Implications Of Pecuniary Externalities On An Electric Grid, Charles Sims, Gasser G. Ali, J Scott Holladay, Tim Roberson, Chien-Fei Chen, Islam H. El-Haddad

Civil Engineering Faculty Publications

The adoption of rooftop photovoltaic (PV) systems can create upward pressure on retail electricity rates as utilities are forced to spread their fixed costs of generation and transmission across a smaller customer base. Since high-income households are more likely to purchase PV systems, low-income households may be disproportionately impacted by these rate increases. Using a novel combination of agent-based computational economic modeling and a choice experiment of rooftop solar adoption, we show how this pecuniary externality between low- and high-income customers increases low-income electricity bills by 10% in an area with some of the highest poverty rates in the United …

Depth-Averaged Two-Dimensional Hydrodynamic Modeling In Headwater Channel And Floodplain Design., Jesse Dylan Robinson

Electronic Theses and Dissertations

In the channels and floodplains of inland waterways the hydrodynamic forces of floods destroy property and infrastructure, threaten lives, and damage aquatic habitat. Flood simulations using robust and efficient depth-averaged two-dimensional hydrodynamic models (2D models) can be interpreted to design effective solutions for areas vulnerable to damage. The reliable interpretation of 2D models for use in design is improved here through direct comparison of 2D model output to observed flood events at 6 headwater research sites. Instrumentation was used for model calibration and to define the surface hydrodynamics at sites with confined flows, wide and shallow flows, at vertical steps, …

Alkali-Silica Reactivity And Ionic Transport In Mortar With Hydrophobic Inclusions., Isaac Offei

Electronic Theses and Dissertations

Alkali-silica reaction (ASR) causes extensive damage to concrete infrastructure worldwide, with traditional mitigation strategies increasingly constrained by supplementary cementitious material (SCM) supply limitations. This dissertation investigates an innovative approach to ASR prevention through strategic application of hydrophobic materials to modify moisture and ionic transport pathways in cement mortars. The research employed a comprehensive three-objective experimental program using highly reactive aggregates and three hydrophobic materials: hexamethyldisilazane (HMDS)-treated fumed silica, silane-based emulsion, and silane-based crème. The first objective demonstrated the feasibility of hydrophobic aggregate surface modification, achieving 46% and 38% reductions in ASR expansion for washed and non-washed hydrophobic aggregates, respectively. Microstructural …

Steel-Concrete Composite Girder Experiments To Isolate Interface Load Transfer Effects On Stud Fatigue Life, Marc Crespi Hromcova

Graduate Theses and Dissertations

Metal fatigue resulting from repeated loading is a primary limit state that affects the quantity of headed shear studs required in the composite design of steel bridge girders. While concrete-deck-to-steel-superstructure load transfer is only considered through stud bearing in the American Association of State Highway Transportation Officials (AASHTO) design standards, friction and interface interlocking effects may also contribute. This study aims to experimentally quantify the effect of interface conditions on the fatigue life of headed studs within composite girders. In this study, two full-scale composite girder specimens having the same geometry and material properties are tested with two interface conditions. …

Optimizing Indigenous Timber Short-Gap Crossing Designs By Minimizing Wood Moisture Content, Robert Greenwood

Graduate Theses and Dissertations

Reducing moisture content increases wood strength and reduces the weight of timber members. An accurate and efficient method for measuring moisture content is important for the design and construction of indigenous timber short-gap crossings. This study evaluates different methods for measuring moisture content in timber, describes a methodology for developing a representative moisture content value for a timber log, and approaches for quickly drying large timber logs. The results of this thesis will support activities in developing a representative moisture content of a log for structural design purposes and reducing weight for constructability purposes. The approaches discussed were developed considering …

Toward A Better Understanding Of Friction, Adhesion, And Stud Bearing Shear Transfer At The Steel-Concrete Interface Of Composite Bridge Girders, Callie Grace James

Graduate Theses and Dissertations

Following curing of the concrete deck, load transfer between the concrete and steel components in a composite bridge girder is possible through three mechanisms: 1) mechanical contact (bearing) between the embedded shear connectors and surrounding cured concrete, 2) adhesion between the cured concrete and steel-section top flange, and 3) friction between the contacting materials Understanding the mechanisms of bearing, adhesion, and friction shear transfer at the steel-concrete interface of composite bridge girders is necessary for efficient proportioning of headed shear connectors (or studs) in design. To better understand the roles that stud bearing, adhesion, and friction play in composite girder …

Mbse For Process Analytical Technology- Bwon Analysis Case Study, Arnaldo Garcia Cervantes

Open Access Theses & Dissertations

Volatile Organic Compound (VOC) emissions from industrial sources, particularly Benzene, present significant environmental and public health challenges. Regulatory frameworks, such as the U.S. Environmental Protection Agency’s Benzene Waste Operations NESHAP (BWON), mandate strict monitoring of control devices, specifically carbon adsorption canisters, to prevent emission breakthrough. However, current industry practices rely heavily on manual Method 21 testing, a labor-intensive process that creates lagging indicators and increases the risk of non-compliance events. This thesis proposes the design and development of an on-line, automated fugitive emissions monitoring system tailored for carbon canisters using Model-Based Systems Engineering (MBSE). Utilizing the Object-Oriented System Engineering Method …

Investigation Of Hot Mix Asphalt Aging Effect On Binder Performance, Zahra Mohajeri

Open Access Theses & Dissertations

Asphalt roads continuously experience physicochemical changes under the combined influence of oxygen, heat, ultraviolet (UV) radiation, and water. Oxidation increases molecular polarity and association, causes maltenes loss, and continues hardening the asphalt binder, reducing ductility, stress-relaxation capacity, and resistance to cracking (Petersen 1982; Colbert and You 2012). Because aging is a cumulative process beginning at plant production, accelerating during construction/compacting, and continuing in service, the laboratory tests and indices must capture the extent of short-and long-term aging to support performance-related specification and Balanced Mix Design (BMD) (AASHTO R30 2022; Kim et al. 2017). This chapter reviews: (i) laboratory and field-representative …

Evaluating Utilidor Performance And Ground Temperature Variability In UtqiaġVik, Tate Rachow

Geosciences

Permafrost degradation in Arctic regions poses increasing risks to infrastructure as climate warming accelerates thaw processes, alters hydrology, and deepens the active layer. In Utqiaġvik, Alaska, utilidors— utility conduits—play a vital role in protecting water and wastewater services, yet their thermal performance under changing conditions remains poorly constrained. This thesis evaluates the thermal behavior of the Site U-1 direct buried pipes on Stevenson Street using historical thermistor resistance data converted to temperature, combined with calibrated two- dimensional TEMP/W numerical models. The models incorporate layered backfill materials and polyurethane insulation, while also simulating operational influences of water and wastewater temperatures. Calibration …

Engineering Risk And Indigenous Resilience Toward Intelligent Decision Support For Mining In Ancestral Lands, Izech Brian O. Edwin, King Harold A. Recto

Electronics, Computer, and Communications Engineering Faculty Publications

Mining within ancestral territories reveals an ongoing conflict between technical viability and Indigenous consent. This collaborative study, conducted by an engineering scholar and a policy researcher of Indigenous heritage in Benguet among the Ibaloi and Kankanaey peoples, investigates how risk transparency and policy alignment can bridge existing divides, while formulating principles applicable to other Indigenous mining contexts. The study provides an initial evaluation of the feasibility of a proposed large-scale mining operation within a risk-informed, data-driven governance framework. Three elements of engineering risk were assessed utilizing literature-derived and proxy parameters: (1) Land degradation is indicated by a Soil Productivity Index …