Digital Commons Network^™

Assessing Sample Bias And Establishing Standardized Procedures For Weighting And Expansion Of Travel Survey Data, Fahmida Nilufar

LSU Master's Theses

Recent household travel surveys are encountering problems with non-response, non-coverage, non-reporting, and even incorrect or incomplete reporting of trips. In addition, data from survey samples are affected by the social, and economic conditions of the respondents, as well as the survey instrument used to collect the data. As a result, household travel survey data are invariably associated with some level of bias. These threats to the integrity of the data are often ignored while analyzing the sample survey data. However, considering the importance of information derived from such surveys, it is necessary that the survey must provide an accurate reflection …

Field Evaluation Of In-Situ Test Technology For Qc/Qa During Construction Of Pavement Layers And Embankments, Munir Darwish Nazzal

LSU Master's Theses

With the coming changes from an empirical to mechanistic-empirical pavement design, it becomes essential to move towards changing the quality control/quality assurance (QC/QA) procedures of compacted materials from a unit weight-based criterion to a stiffness/strength based criterion. The non-destructive in-situ tests such as Geogauge, Dynamic Cone Penetrometer (DCP), and Light Falling Weight Deflectometer (LFWD) can be used as effective tools in the assessment of subsurface conditions and in evaluating the stiffness of pavement materials and embankment. This thesis evaluates the potential use of these three devices to reliably measure the stiffness characteristics of highway materials for possible application in the …

Computational Model For Heat Transfer In The Human Eye Using The Finite Element Method, Umit Cicekli

LSU Master's Theses

In this work a finite element model for the human eye presented. Thermal analysis was done in order to capture the temperature variation in the human eye. The model was created using advance finite element program ABAQUS. In the model each of the eye's component (cornea, sclera, lens, iris, aqueous and vitreous humor) has own material property. Specific boundary conditions were used for the model. The model incorporates the interaction between eyes components. The Comparisons were done with the available experimental results. The results show that there is a temperature variation in the human eye components with the increasing the …

Selected Chemoautotrophic Processes In Wastewater Treatment: Low Temperature Nitrification Inhibition By An Azo Dye And Biofiltration For Odor Control Of Hydrogen Sulfide, Ronald W. Martin Jr.

Dissertations, Master's Theses and Master's Reports - Open

Biochemical processes by chemoautotrophs such as nitrifiers and sulfide and iron oxidizers are used extensively in wastewater treatment. The research described in this dissertation involved the study of two selected biological processes utilized in wastewater treatment mediated by chemoautotrophic bacteria: nitrification (biological removal of ammonia and nitrogen) and hydrogen sulfide (H2S) removal from odorous air using biofiltration.

A municipal wastewater treatment plant (WWTP) receiving industrial dyeing discharge containing the azo dye, acid black 1 (AB1) failed to meet discharge limits, especially during the winter. Dyeing discharge mixed with domestic sewage was fed to sequencing batch reactors at 22oC and 7oC. …

How To Establish Successful Cooperative Student Learning Centers For Stem Courses, Ronald James Bieniek, Douglas R. Carroll, Cesar Mendoza, Oran Allan Pringle, Ekkehard Sinn, Kai-Tak Wan, Donald C. Wunsch

Physics Faculty Research & Creative Works

Students learn more if they are actively involved in the learning process, particularly in a cooperative manner. Several UMR faculty have operated course-based learning centers (LCs) as part of the campus-wide Learning Enhancement Across Disciplines (LEAD) Program of student learning assistance and enhancement. LCs are designed to assist large numbers of students in a cost- and time-efficient manner that promotes student engagement without requiring undue amounts of faculty time. Course instructors spend time in the open learning environment of the LC, in lieu of office hours, guiding students to master course material and skills in their evolution from novice to …

Practical Simulation /Optimization Modeling For Groundwater Quality And Quantity Management, Richard C. Peralta, Ineke M. Kalwij, Shengjun Wu

Civil and Environmental Engineering Faculty Publications

Software for mathematically optimizing groundwater management has improved significantly in recent years. The SOMOS code can readily handle large complex plume and water management problems. Most recently, it developed a least-cost $40.82M 30-yr pumping strategy for the 6.58 mile long Blaine NAD plume. That strategy was 19 percent better than the strategy developed simultaneously by an experienced consultant using normal trial and error simulation procedures. The management problem involved 60 stress periods, and well installation and pumping rates that could change every 10 periods. The optimal strategy employed 10 new wells. At a simpler site, SOMOS helped select robust strategies …

Optimization Of The Light Dynamics In The Hydraulically Integrated Serial Turbidostat Algal Reactor (Histar), Barbara Christine Benson

LSU Doctoral Dissertations

The research objective was the optimization of light dynamics in a Hydraulically Integrated Serial Turbidostat Algal Reactor (HISTAR). A deterministic model of HISTAR productivity that was responsive to manipulations of photosynthetic photon flux fluence rate (PPFFR) was developed, calibrated, and applied. A series of experiments was conducted to define the mathematical equations that best describe three relationships. The first relationship was between the elevation (E) of the light source and the culture surface PPFFR (I_o). The second relationship was between the biomass concentration (X) in the experimental unit and the average PPFFR in the reactor (I_a). …

Clay Landfill Liners Subject To Variable Interfacial Redox And Ph Conditions-Heavy Metal And Clay Interactions, Ping Zhou

LSU Doctoral Dissertations

Municipal landfill leachate contains high levels of metal species, including Cu, Zn, Cd and Pb generating competitive interactions between these metal species and the landfill clay liner materials. Characterization of the clay fraction, physical and chemical characteristics of landfill clay liner materials, the competitive interaction of metal species with clay liner materials, the kinetic modeling of metal species transport in clay liner, and the effect of cyclic interfacial redox potential on the structural changes to the clay liner and leachate metal transport were investigated in this study. The clay liner materials studied included Na-bentonite, kaolinite and Amite soil (sandy silty …

Solute Transport In A Porous Medium: A Mass-Conserving Solution For The Convection-Dispersion Equation In A Finite Domain, William Golz

LSU Doctoral Dissertations

This dissertation considers the proper mathematical description for the physical problem of a miscible solute undergoing longitudinal convective-dispersive transport with constant production, first-order decay, and equilibrium sorption in a porous medium. Initial and input concentrations may be any continuously differentiable functions and the mathematical system is articulated for a finite domain. This domain yields a mass balance which requires Robin (i.e., third-type) boundaries, which describe a continuous flux but a discontinuous resident-concentration. The discontinuity in the resident concentration at the outflow boundary yields an underdetermined system when the exit concentration is not experimentally measured. This is resolved by defining the …

Analytical Study On Flood Induced Seepage Under River Levees, Senda Ozkan

LSU Doctoral Dissertations

A common and potentially dangerous phenomenon associated with flooding is seepage under levees and the formation of sand boils. Seepage flow due to hydrostatic head gradients of floods may cause deformation of pervious layers leading to heave, piping and sand boils. Underseepage may also cause irreversible changes in the characteristics of the porous medium. A series of independent flood events may have cumulative effects on pervious layers causing sand boils to grow. Current underseepage analyses for levees are based on steady-state flow. Transient seepage flow due to rapid changes in river head may contribute to cumulative effects and cause critical …

Rapid Measurement Of Indoor Mass-Transfer Coefficients, Glenn Morrison, Zhao Ping, Deborah J. Wiseman, Maneerat Ongwandee, Hong Chang, Julie Portman, Shekhar Regmi

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Indoor air pollutant concentrations can be influenced by how rapidly species are transported to and from surfaces. Consequently, a greater understanding of indoor transport phenomena to surfaces improves estimates of human exposure to indoor air pollutants. Here, we introduce two methods of rapidly and directly measuring species fluxes at indoor surfaces, allowing us to evaluate the transport-limited deposition velocity, v_t (a mass-transfer coefficient). The deposition velocity sensor (DeVS) method employs a small microbalance coated with a pure hydrocarbon, preferably octadecane. We quantify flux (or evaporation rate) of the hydrocarbon into a room by observing the rate of mass loss …

Academic Fleet Renewal- Two Years Later, Larry Atkinson

CCPO Publications

(First paragraph) In November 2000, I wrote a Soapbox article on fleet renewal for Sea Technology. It is a little unsettling to see how slowly ideas move towards implementation. Nevertheless, we are making progress. In this editorial I will note a bit of that progress and try to guess where we will be in two more years.

Indirect Evaporative Cooling Potential In Air-Water Systems In Temperate Climates, Ben Costelloe, Donal Finn

Articles

Recent developments have prompted a review of evaporative cooling technology as an effective means of cooling modern deep plan buildings. Prominent among these developments is the success of high temperature sensible cooling systems, particularly, chilled ceilings, which require a supply of cooling water at 14–18 °C. Crucial to the success of evaporative cooling technology, as a significant means of cooling in modern applications, is the ability to generate cooling water, in an indirect circuit, at a temperature which closely approaches the ambient adiabatic saturation temperature (AST) or wet bulb temperature (WBT). Recent experimental research has demonstrated that it is technically …

Beta Testing Implementation Of The Purdue Time Domain Reflectometry (Tdr) Method For Soil Water Content And Density Measurement, Vincent P. Drnevich, Xiong Yu, Janet Elaine Lovell

JTRP Technical Reports

The Purdue TDR method is a new technology for simultaneously measuring soil water content and dry density insitu. An ASTM standard for using TDR to measure soil water content and dry density based on Purdue TDR method was approved during the time span of this project and is designated ASTM D6780. The primary objective of this study was to take the Purdue TDR Method to the point where it is widely field tested by users on a broad spectrum of soils around the country. This goal was achieved by involving researchers at other universities and practitioners in federal and state …

Anisotropy And Its Relation To Liquefaction Resistance Of Granular Material, Isao Ishibashi, Omer F. Capar

Civil & Environmental Engineering Faculty Publications

This research establishes quantitative relationships between soil's anisotropy and liquefaction resistance for granular materials. Uniform medium density (D_r = 50%) sand specimens were prepared using three different sample preparation techniques (air pluviated (AP), moist tamped (NIT), and moist vibrated (MV)) to create different initial soil fabrics. Undrained cyclic triaxial tests were then performed to determine the liquefaction resistance of each soil specimen. On the same specimens in the triaxial cell, vertical and horizontal compression wave velocities and vertical shear wave velocity (V_s) were measured using piezoelectric bender elements. Anisotropic (transversely isotropic) elastic constants of the soil specimens were …

Site-Specific Probabilistic Load Modelling For Bridge Reliability Analysis, Colin C. Caprani, A. Belay, A. J. O'Connor

Conference papers

Reliability assessment of a short span beam-slab reinforced concrete bridge in Vienna is proposed using site-specific traffic data recorded using the Slovenian Weigh in Motion (SiWIM) system. An initial evaluation of the bridge using a determinintic approach shows that the critical limit state is bending. This paper describes the statistical analysis of the SiWIM data and the traffic flow simulations performed to predict the characteristic extreme load effects to which the bridge may be subjected during its remaining lifetime. These values are compared to the magnitude obtained from a deterministic approach. The influence lines used in the simulations are the …

Analysis Of Cooling And Heating Of Water With Flat-Plate Solar Radiators, Igor Balen, Vladimir Soldo, David Kennedy

Conference Papers

Extensive analysis of flat-plate radiative panels operation using average hourly weather data for a maritime climate region was performed. The panels are integrated in the space ventilation system with air-cooling by means of a cold-water coil. Their primary function is to prepare sufficient quantity of cold water, integrating radiative and convective cooling, that is collected in the cold-water tank during the nighttime operation. That cold water is used for cooling of the air during daytime. By small modification during daytime, solar panels could be turned into collectors and used to produce the hot water that is collected in a separate …

The Effectiveness Of Maintenance And Its Impact On Capital Expenditures, Samuel Labi, Kumares C. Sinha

JTRP Technical Reports

With ever increasing traffic loadings, highway pavement maintenance needs continue to outpace the availability of resources, and transportation agencies seek cost-effective maintenance practices. This study investigated the effectiveness of maintenance treatments in the short-term and the cost effectiveness of maintenance strategies over entire pavement life. The study also analyzed the relationships and trade-offs between maintenance and capital investments such as pavement rehabilitation, and the trade-offs between preventive and corrective maintenance. These analyses were carried out through a work sequence that included analyses of historical trends, literature review, and a questionnaire survey. The study found that there are significant benefits associated …

Imaging And Locating Buried Utilities, Hyung Seok Jeong, Carlos A. Arboleda, Dulcy M. Abraham, Daniel W. Halpin, Leonhard E. Bernold

JTRP Technical Reports

The urban underground has become a spider’s web of utility lines, including phones, electricity, gas, cable TV, fiber optics, traffic signals, street lighting circuits, drainage and sanitary sewers and water mains. Utility damages during construction are very significant and on the rise, resulting in construction delays, design changes, claims, property damages, service breakdowns, disruption of neighboring businesses and even injuries and lost lives. The American Institute of Constructors (AIC) reported that damage to utility lines is the third most significant crisis for contractors. The state-of-the-art and the state-of-the-practice imaging technologies that have potential for being applied in locating underground utilities …

Initial Study For Cost-Effectiveness Of Joint/Crack Sealing, Chuanxin Fang, Khaled A. Galal, David R. Ward, John E. Haddock

JTRP Technical Reports

The sealing and resealing of joints and cracks in PCC, HMA, and composite pavements is assumed to be an important component of pavement maintenance. Recently this practice has been challenged by research indicating that sealing may not be cost-effective. The Indiana Department of Transportation currently spends approximately four million dollars annually to perform joint/crack sealing. The primary objective of the research presented in this report is to investigate the costeffectiveness of joint/crack sealing in relation to pavement performance. The results of a mail survey showed that most states, including Indiana, do not have quantitative justification for sealing policies, nor do …

Development Of Vehicle Platoon Distribution Models And Simulation Of Platoon Movements On Indiana Rural Corridors, Yi Jiang, Shou Li, Daniel E. Shamo

JTRP Technical Reports

Since the 1980s, traffic volumes have experienced a rapid growth of approximately 30% in Indiana. Traffic data indicates that more than 70% of vehicles travel in platoons on Indiana highway corridors in the vicinity of urban areas. At a rural highway intersection consisting of a major road with high traffic volume and a minor road with low traffic volume, it is very common that the green time cannot be used efficiently, especially when the vehicle detectors on the major road are imbedded close to the intersection. In Indiana, most of the traffic signal timing systems operate well. However, these systems …

Hydrodynamic And Sediment Transport Modeling Of Deltaic Sediment Processes, Hassan Shahid Mashriqui

LSU Doctoral Dissertations

This dissertation tests the hypothesis that the early phases of deltaic bar and distributary channel formation and sediment transport on an adverse slope could be simulated with a 2D finite element sediment transport model. The models used were RMA2 and SED2D modules of the TABS-MD model suite. A finite element mesh of the lower Atchafalaya River and the delta was developed, using the Surface Water Modeling System (SMS) software package. Calibration and validation of the model were performed, using data collected during field surveys and from available Atchafalaya River archived flow, suspended sediment, and dredging records. In a test simulation …

Boussinesq Model And The Relative Trough Froude Number (Rtfn) For Wave Breaking, Takashi Okamoto

Civil & Environmental Engineering Theses & Dissertations

The relative trough Froude number (RTFN) theory is a new phase-resolving type, wave breaking trigger model introduced by Utku (1999) and Utku and Basco (2002). Based on the moving hydraulic jump concept, this model provides a better implementation of wave breaking in terms of hydrodynamics. Development of computer resources permits the use of the phase-resolving type, Boussinesq wave models in nearshore areas. The Boussinesq equation, however, does not include the physics of wave breaking, so that an additional mechanism is required to initiate wave breaking in the model. The main objective of this study is to develop a new wave …

Developing A Methodology To Detect Partial Failures For Dynamic Systems, Anwar A. Al-Jowder

Engineering Management & Systems Engineering Theses & Dissertations

The purpose of this research is to develop a decision support system that can assist in detecting partial failures in dynamic systems such as Fire Control System Tracking Radar (TR) onboard Naval Ships. Partial failures do not necessarily shut down the system immediately but cause degradation of operational performance. Previous work has shown that experts in the field of failure detection, test point insertion and Built-In-Test Equipment (BITE) can provide useful input in detecting partial failures. Partial failures affect operational system performance and support costs, which can be significant. Often, however, partial failure detection consists of the estimations and opinions …

Optimal Pumping Strategies For Umatilla Chemical Depot Rdx And Tnt Plumes, Richard C. Peralta

Civil and Environmental Engineering Faculty Publications

We present optimal pumping strategies to address RDX and TNT plumes at Umatilla Chemical Depot (UCD). We provide strategies for four optimization problem formulations. Each strategy requires constructing 2 wells. New Well U-1 is in the same location for all strategies. The second well location can differ with formulation. The number in a strategy’s name refers to the formulation it addresses. Using optimization in design is normally an iterative process involving interaction between the designer and client after preliminary optimizations are performed. This project does not permit that. To compensate, we present a second strategy for Formulation 1 (Strategy USU1B), …

Mathematical Modeling And Prediction Method Of Concrete Carbonation And Its Applications, Ming Te Liang, Wenjun Qu, Chih-Hsin Liang

Journal of Marine Science and Technology–Taiwan

The carbonation process of concrete is principally a diffusion phenomenon. The penetration rate of carbon dioxide depends mainly on the concrete quality and the exposure condition. Based on both Fick’s first and second laws of linear diffusion equations, the threedimensional equation of conservation of mass is expressed. This equation can be reduced to two- and one- dimensional equations of conservation of mass which can predict the carbonation depth beneath corners and the general surface of concrete structures, respectively. The objectives of this investigation are to measure the depth of carbonation from the free surface of a concrete member and to …

A Method For Modeling Low-Probability, High- Consequence Risk Events: Vessel Traffic On The Lower Mississippi River, George Wooddell, Robert Gramling, Craig J. Forsyth

The University of New Hampshire Law Review

[Excerpt] "A variety of commodities, from chlorine to corn and petroleum to passengers, are transported on the lower Mississippi River regularly. Corn, wheat and coal are the most commonly carried commodities. From a human health and safety perspective, these are relatively benign products in that a vessel accident and spill of these are not directly hazardous to people, whatever other ecological disturbances may ensue. However, over eighty million tons of petroleum products are transported on the river annually. Over a million tons of liquid natural gas traverse the river through the center of New Orleans. Additionally, over 400,000 tons of …

Upper Spokane River Model: Boundary Conditions And Model Setup, 2001, Spencer Slominski, Robert Leslie Annear, Chris Berger, Scott A. Wells

Civil and Environmental Engineering Faculty Publications and Presentations

The Washington Department of Ecology is interested in a water quality model for the Upper Spokane River system for use in developing Total Maximum Daily Loads (TMDLs). The goals of this modeling effort are to:

• Gather data to construct a computer simulation model of the Spokane River system including Long Lake Reservoir and the pools behind Nine Mile dam, Upper Falls dam and Upriver dam for 2001 based on the calibration conducted for 1991 and 2000 data sets, (Annear et al, 2001).

• Ensure that the model accurately represents the system hydrodynamics and water quality (flow, temperature, dissolved oxygen …

Adaptation Of Project Finance To Small Contractor Financing, Ragunathan Venkateswaran

Masters Theses

One key reason for the poor performance of small construction establishments in securing a higher chunk of the annual project volume is funding. While construction industry does not require a large capital investment it does require a large working capital to start up the project and generate bills so that the resulting cash flow may take over the remaining funding requirements. Unfortunately for small contractors there are very limited options available from the banks or other lending institutions to cover this large working capital requirement in the absence of sufficient collateral. The "Project Finance" method, which has been used in …

Interactive Learning Tools: Animating Statics, Nancy Hubing, David B. Oglesby, Timothy A. Philpot, Vikas Yellamraju, Richard H. Hall, Ralph E. Flori

Business and Information Technology Faculty Research & Creative Works

Computer-Based Modules for Engineering Instruction Must Be Concise, Flexible, Educational and Engaging in Order to Effectively Supplement Traditional Classroom Teaching Tools. a Computer Example that Takes More Time Than a Chalkboard Presentation is Not Likely to Be Useful in Today's Engineering Classroom. Flexible Navigation is Necessary So that the Instructor Can Quickly and Easily Respond to Student Questions. Useful Modules Must Also Improve Problem-Solving Skills or Clarify Troublesome Concepts in Order to Be Considered Worthy of Inclusion in the Limited Class Time Available. Finally, and Perhaps Most Importantly, Effective Computer-Based Modules Must Meet the Challenge of Holding the Student's Attention. …