Digital Commons Network^™

Socio-Economic Impacts Of Computer Viruses In Tanzania, M Victor

Tanzania Journal of Engineering and Technology (TJET)

This paper reports on a research project conducted with an objective of identifying and assessing various approaches used by different computer users (Management, System Administrators and end users) in Tanzania to combat computer viruses (CVs), and to assess users' awareness level on CVs. Specifically, the study aimed at assessing the awareness level on CVs to the Tanzanian business community; analyze the socio -economic impact caused by CVs in Tanzania and; assess existing methods, capacity and limitations on controlling CVs in Tanzania. Data was collected using both questionnaires and interview from financial institutions such as NBC and BOT, and telecommunications sector …

Environmental Impact Of Wetland Resources Utilization In Simuyu Basin, Tanzania, Shadrack Mwakalila

Tanzania Journal of Engineering and Technology (TJET)

There is a growing appreciation of the natural functions of wetlands, and the values and different forms of uses that humans attach to them. Wise use and special conservation strategies are therefore needed in order to sustain their productivity. Wetlands are one of the most fruitful areas of archaeological research, and they are the ideal setting in which to study the interactions between physical processes and human actions that encapsulate and exemplify many of the themes of man's impact on his environment. But all these beneficial functions of wetlands seem to be in danger of being lost to draining and …

Suitability Of Crusher-Dust As Masonry Construction Material, John Makunza

Tanzania Journal of Engineering and Technology (TJET)

Crusher dust generated at Kunduchi quarries in Dar es Salaam during aggregate crushing is counted as a waste material, and some times it .is disposed away or sold at a cheap price of not more than a quarter of that of sand. A study on the use of the crusher dust as a building material has been carried out in which samples were collected and analyzed for grading (sieve analysis). In additional to that, other samples were stabilized with a small amount of cement, from which bricks were produced and tested for compressive strength. Other bricks were bonded together using …

Comparison Of Two Different Transport Models To Predict Sediment Transport: Simiyu River, Tanzania, Case Study, F Mwanuzi1

Tanzania Journal of Engineering and Technology (TJET)

This paper presents the results of a study which focused at the spatial and temporal characteristics of sediment transport and deposition in the main river channels and floodplains. Two different numerical models were used to simulate stream flow and to analyze sediment transport and deposition in the river channels: (1) the SMS modules RMA2 and SED2D and (2) the SCALDIS model developed at the Free University of Brussels. Both numerical models contain a two-dimensional hydrodynamic module and a sediment transport module, allowing simulation of stream flow and sediment transport processes in river channels. However, they differ in the following aspects: …

Overview Of Hydraulics And Simiyu River Sediment Input Into Magu Bay, Lake Victoria, Tanzania, Alfonse Dubi

Tanzania Journal of Engineering and Technology (TJET)

Lake Victoria is experiencing multifaceted environmental and ecological problems. A  study of the problems needs a multidisciplinary approach. to establish the cause-effect relationships. The study focuses on the hydraulics of Lake Victoria's Magu Bay and Simiyu riverine input of suspended sediments and their distribution in the Bay. Sampling in the river mouth and the Bay was conducted aboard an 8m outboard engine wooden boat. Turbidity, currents speed and direction were measured using an "AANDERAA" multi-sensor self-recording current meter model 9 (RCM9). Water depth was measured using an echo-sounder type FISHIN' BUDDY II. Geographical positions of the sampling locations were obtained …

Ceramic Properties Of Chimala Kaolin Clay, Leonard Akwilapo

Tanzania Journal of Engineering and Technology (TJET)

The physico-chemical properties of kaolinite clays occurring in abundance near Chimala were studied with a view of finding out their suitability in sanitary ware production. The viscosity of the clay was found to be within the range acceptable in industrial application (≤ 500 cp for 70% solids), enhancing its prospects for the manufacture of slip cast shapes with satisfactory properties. The chemical composition of the clay reveals a high content of Fe₂O₃, 1.48%, which is expected to affect the translucency and colour of the finished ware. However, such quantity would not have detrimental effects in the production of sanitary ware. …

Earth Building In Tanzania - Use Of Soil Stabilized Bricks And Blocks, A Mrema

Tanzania Journal of Engineering and Technology (TJET)

This paper presents experimental results of investigations done on the use of stabilized earth (soil) for the manufacture of bricks and blocks. The soil used was clayey sand of low plasticity. Two types of stabilizers were used to make stabilized bricks and these were cement and a combination of cement and lime. Different stabilizer proportions were employed. Results of tests carried on these bricks at 28 days indicate an optimum mix proportion of 7% cement if cement is used alone and an optimum mix proportion of 5% each if a combination of lime and cement is used as a stabilizer. …

Quality Of Common Salt In The Tanzanian Market, Kamwanya E

Tanzania Journal of Engineering and Technology (TJET)

The quality of edible salts in the Tanzanian market has been studied by comparing the levels of iodine, heavy metals, and non-metals. Among the 19 analyzed local salt samples, only two of them—Kipepeo salt (76.67 mg/kg) and Super salt (79.95 mg/kg)—met the recommended level of iodine as per TBS (Tanzania Bureau of Standards) specifications. Other brands have iodine levels below the TBS specification.

Degradation Of Waterfront Reinforced Concrete Structures At The Port Of Dar Es Salaam, I Sanga

Tanzania Journal of Engineering and Technology (TJET)

The paper summarises the results of an investigation done on piers at the Dar es Salaam Port. The problem facing these structures and marine facilities is their exposure to aggressive environmental phenomena. The paper presents an investigation of the strength and corrosion of concrete seaport piers so as to determine degradation of the reinforced concrete waterfront structures in the port of Dar es Salaam. For instance the structures at a dhow quay terminal had been in use for about 100 years. The facility was in bad condition as the concrete had been badly damaged due to corrosion. Some of the …

Cement Oonded Wood Wool Board As A Building Material For Low Cost Housing, A Mrema

Tanzania Journal of Engineering and Technology (TJET)

This paper gives results of a preliminary study on the properties of cement bonded wood-wool boards manufactured as composites by using wood-wool (excelsior) from podocarpus spp wood species and ordinary Portland cement. Two main parameters were varied during the investigation and these were the width of the wood-wool and the cement to wood-wool ratio. Results show that the optimum mix proportion is three parts of cement to two parts of wood-wool by weight and that a smaller excelsior width gives higher board strengths. The results from tests on flexural strength, compressive strength and tensile strength far exceeded the requirements of …

Low Cost Slab Manufactured From Masonry Slab Elements, John Makunza

Tanzania Journal of Engineering and Technology (TJET)

The construction of bungalow houses requires sufficient space to accommodate all the requirements as per the client’s wish. The idea of low-rise or high rise buildings is very remote for most of the people due to the high costs of construction involved. Much of the said cost is due to the concrete floor slab as it consumes a bigger portion of concrete material when compared to beams and columns. In this paper, a study presented is on a new form of voided slab constructed from masonry slab elements that do not utilize formwork and consumes less concrete material. The slab …

Hydrographic Aspect Of Chole Bay, Mafia Island, Alfonse Dubi

Tanzania Journal of Engineering and Technology (TJET)

Mafia has been a port on the monsoon trade routes from the Arabia to Sofala for almost 2000 years. The Island has not changed significantly since ancient times and retains a traditional culture of fishing and subsistence agriculture. By 1991, development of tourism on the Island seemed very slow. Factors limiting the number of visitors include lack of adequate travel connections between the island and the mainland, and inadequate and poor hotel services. Currently, accessibility to Mafia Island has improved. Mafia Island can now be reached by air in addition to the traditional sea travel. However, the Island does not …

Assessment Of The Accuracy Of Approximate Methods In The Analysis Of Plane Frame Structures, I Rubaratuka

Tanzania Journal of Engineering and Technology (TJET)

pproximaic methods of analysis are widely used in the analysis OJ' frames for preliminary design due to their simplicily as compared to exact analysis meth o ds Ough they a re nol as accurate. In this paper. the methods Of hinges and portal frame are described and have been used to analyze a statically indeterminate frame by taking inro account the bending stiffness of the frame members. The obtained results are comparable Io the magnitudes of forces determined by exact methods Of analysis.

Review Of The Product Development Process And Information Flow In The Manufacturing Industry: Problems And A Possible Wav Forward, E Opiyo

Tanzania Journal of Engineering and Technology (TJET)

No abstract provided.

Field Evaluation Of Soil Physical, Chemical And Hydraulic Property Changes Caused By Surface Water Application: A Case Study Of Ruaha-Mbuyuni Irrigation Scheme, Iringa, Tanzania, A Tarimo

Tanzania Journal of Engineering and Technology (TJET)

The conventional metering. pyepa.vmen,' and estimates have been used in power utilities industries. The svslen,'s hare experienced many problems such as power tampering, bill tampering, ./åiluve ro receive invoices by poner unlity customers and so on. Different technologies have been investigated To overcome the problems and recently it has been realized that remote 'nonitoring sysle•ns through powerline channel is a solution offhese problems in Tanami". However. 'he powerline network has been used for electrical power IO use i,' for implementation of remote monitoring: network must be setup and has to be modeled to accommodate communications. The contribution has analyzed 'he …

Introduction Of Seismic Resistance Features In The Construction Of Buildings In Tanzania, I Rubaratuka

Tanzania Journal of Engineering and Technology (TJET)

Available dara indicates that a greater part of Tanzania lies within a seismic region. to date most Of the buildings in the country have been designed and constructed without considering seismic loads. In addition no design codes have been developed to guide the seismic design for buildings and other related structures in Tanzania. This paper outlines the basic design concepts, which are useful during the design of seismic resistant buildings before the seismic design code is developed and adopted in Tanzania.

Importance Of Structural Fire Protection In Reinforced Concrete Buildings: A Case Study Of Ex-Nasaco Building In Dar Es Salaam, I Rubaratuka

Tanzania Journal of Engineering and Technology (TJET)

Reinforced concrete is concrete that is internally reinforced with steel bars or mesh. This gives rhe malerial the compressive strength of concrete along wilh the tensile strength Of steel. Reinforced concrete does not perform well under fire conditions as it spalls and loses strength. Heating Causes a failure Of the bond between concrele and sleels bars and this results in reduction of strength of concrele. Strength of concrete decreases With increase in temperature and increase With time. In order to provide fire resistance to structural components/elements in buildings, it is important Io consider the type of aggregates to be used. …

Evaluation Of Long-Shore Sediment Transport On The Kunduchi Beach Tidal Flat, Dar Es Salaam, Alfonse Dubi

Tanzania Journal of Engineering and Technology (TJET)

Kunduchi Beach is located approximately IO kilometres north Of Dar es Salaam City on the coasl of Mainland Tanzania. Currents and sediment concentrations were measured using a multi-sensor self-recording current meter. Waves Were measured using pressure gauges. Some physical features were visually measured. The general orientation of the shoreline is 330 degrees and the tidal flat is characterised by ripples. A1 aboul 150 m from the shoreline, ripples are 7-9 cm high and their wavelength is about 40 cm. Closer to the beach, ripple orientation is 350 degrees: ripple height is 5 cm and ripple wave length is 5 cm. …

Evaluation Of Pollution Loading Into Msimbazi River By Rapid Assessment And Direct Measurement Methods, J. H. Y. Katima

Tanzania Journal of Engineering and Technology (TJET)

This paper assesses the suitability of Rapid Assessment (RA) methodology as a tool for making an environmental pollution inventory in data poor situation. The RA method was applied to estimate Biological Oxygen Demand (BOD), nitrogen and phosphorous loading into the Msimbazi River in Dar es salaam, Tanzania. The Direct Measurement (DM) was done to validate the results obtained from RA. The methodology is based on estimating waste loads from function variables such as production rate, population, etc. and pollution intensities from domestic, industry and agricultural sources. The incorporation of penetration factors for waste loads reduction refines the assessment procedure. The …

Prediction Of The Response Of Rectangular Cladding Panels To Wind Loading In The Time Domain, Ambrose Shirima

Tanzania Journal of Engineering and Technology (TJET)

The analysis and subsequent design of cladding panels is traditionally based on quasi-static calculation of the wind loads. Pressure coefficients, which are derived from wind tunnel measurements and a design wind speed, are used to compute the wind loading. The codes of practice give the pressure coefficients and the guidelines of deriving the design wind speed from factors, which are specific to the site namely basic wind speed, topography, ground roughness and height above the ground. The concept of design wind speed is simple but it overlooks the resonant vibrations caused by the wind. The paper discusses a procedure for …

Application Of Robustness Analysis For Developing A Procedure For Better Urban Transportation Planning Decisions, Deogratias Eustace, Eugene R. Russell, E. Dean Landman

Civil and Environmental Engineering and Engineering Mechanics Faculty Publications

This paper shows that robustness analysis is a technique with a potential for aiding decision makers in choosing transportation investment projects. In this paper, it has been demonstrated that it can be successfully used in urban transportation planning in conjunction with urban travel demand software. The robustness analysis procedure emphasizes the need, under conditions of uncertainty, to make early decisions in a time-phased sequence, while preserving future options that currently seem attractive. The results of the robustness analysis from the case study used in this paper indicate that the method is simple to understand, easy to use, minimizes future surprises …

Potential For Use Of Sand In Road Construction In Dar Es Salaam And Coast Regions, Mfinanga A

Tanzania Journal of Engineering and Technology (TJET)

Coarse aggregates for use in road construction in Dar es Salaam and Coast regions are becoming increasingly scarce and expensive while sand, which is cheaper, is readily available in the two regions. This research aimed at evaluating the possibility of using quarry sands in the two regions as a major constituent material in bituminous road pavement layers. First, the use of sand in sand-bitumen bases for low and medium trafficked roads was studied. The study then continued with the preliminary evaluation of the possible use of the sands in hot rolled asphalt mixes. Results show that Mbagala sand can be …

Sustainable Data Acquisition Methods For Road Maintenance Management In Developing Countries, N. K.M. Mushule

Tanzania Journal of Engineering and Technology (TJET)

Whilst it may be argued that manual methods of pavement data collection are subjective, unsafe, involve high personnel costs and have low repeatability, the initial costs of acquiring automated systems coupled with the technology required to operate and maintain them can be prohibitive for most developing countries. Moreover, automatic measurement of surface distress has proved to be a difficult challenge to instrument designers. In many cases, manual methods are the only ones that can be employed. A research project was carried out to design a sustainable data collection scheme for network level management system for developing countries. A simple procedure …

Evaluation Of Water Levevaluation Of Water Levels In Relation To The Design Of Coastal Structures In Tanzaniaels In Relation To The Design Of Coastal Structures In Tanzania, Alfonse Dubi

Tanzania Journal of Engineering and Technology (TJET)

Water levels on the coastline of Tanzania vary under the influence of meteorological conditions (winds and barometric pressure) and the East African Coastal Current, whose strength varies with the monsoon winds. Available tidal information is not enough to warrant statistical analysis for evaluating extreme water levels. The highest mean water springs occur at Bagamoyo and Pangani (3.93 m) and the lowest are found at Lindi (2.96 m). The highest astronomical tide is 3.7 m for Dar es Salaam and 4.6 m for Zanzibar, both of which occur during March/April and November. Measured highest water levels approach 4.80 m for Dar …

Requirements Of A Sustainable Pavement Management System For Tanzania, N. K.M. Mushule

Tanzania Journal of Engineering and Technology (TJET)

Since the introduction of pavement management concepts in mid-1960s, more than three decades ago, a considerable number of Pavement Management Systems (PMS) have been developed and implemented widely in many parts of the world. These systems differ in scope and sophistication. However, in some cases, pavement management systems have fallen into marginal use, if not into complete disuse, because of a number of reasons. One of the major reasons leading to the marginalisation or abandonment of pavement management systems, is the failure of system developers to recognise specific and unique needs of the agency or authority responsible for road management. …

Baseflow Separation Based On Storage-Outflow Modelling Of Streamflow Recessions, With Application To Semi- Arid Catchments In Tanzania, S Mwakalila

Tanzania Journal of Engineering and Technology (TJET)

Discharge in many rivers is Often fed by baseflow provided by drainage of the saturated zone in the shallow permeable soils. It is becoming clear that the outflow from this saturated zone is not linear proportional to storage as is commonly assumed in many algorithms. The objectives Of this study theretore, are first to explore the extent to which the assumption of linearity in storage-outflow relationships is valid and secondly to introduce an alternative approach to baseflow separation algorithms for estimating direct mnoff time series. Numerical analysis Of streamflow recessions from the semi-arid catchments of the Great Ruaha basin in …

Some Aspects Of Erosive Waves At Kunduchi Beach, Dar Es Salaam, Tanzania, Alfonse Dubi

Tanzania Journal of Engineering and Technology (TJET)

The area north of the Dar es Salaam City is endowed with beautiful sandy beaches and high concentration or tourist beach hotels that are threatened by coastal erosion. In order to protect the buildings and land, coastal erosion must be controlled by mitigation options that are based on scientific data, wave and current climate along the East African region are generally controlled by the seasonal monsoon winds. During the north-east monsoon period when Winds blow from the Northeast, the wind-generated waves approach the coast from the northerly direction and produce long-shore Currents With a southerly component. During the southerly monsoon …

Efeci's In Reinforced Concrete Due To Environmental Conditions, And Concrete Treatment: A Case Study At The University Of Dar Es Salaam, I Rubaratuka

Tanzania Journal of Engineering and Technology (TJET)

Concrete is produced by mixing together cement, water and aggregates (i. e. sand and coarse aggregates) in specified proportions, It can do well with compressive forces but it is very weak under tensile forces. TO Overcome this problem, steel reinforcement are normally added to produce reinforced concrete which can also withstand tensile forces Experience shows that environmental conditions may have a negative impact On the durability of reinforced concrete structures resulting in development of defects if not properly assessed and appropriate measures adopted to arrest the same at the design and construction stages. The severity of damages for the investigated …

Stress Conditions In The Kilombero Rift, Central Tanzania, A Mruma

Tanzania Journal of Engineering and Technology (TJET)

The ancient and current Stress conditions at the northwestern flank of the Kilombero Rift are assessed in this paper. Neoproterozoic Stresses in the area were associated With 3200/200 trending principal axis of straining in the rocks. Ihis deformation imparted Precambrian ductile gneissic and concordant mineral foliation with attitude Of 0200/3$WNW, 3200/200 trending b•minerai lineation and isoclinal folds With axes trending parallel to the mineral lineation.phanerozoie deformations are mainly of pennvrriasic and Cenozoic periods. Both Of the two episodes Of deformation had constant orientation of princi axes of stresses with trending 0600/020, 02 trending 1600/800 and trending 33 1100. Stress conditions …

Defects In Reinforced Concrete Due To Environmental Conditions And Concrete Treatment: A Case Study At The University Of Dar Es Salaam, A. Rubaratuka

Tanzania Journal of Engineering and Technology (TJET)

Concrete is produced by mixing together cement, water and aggregates (i. e. sand and coarse aggregates) in specified proportions. It can do well with compressive forces but it is very weak under tensile forces. To overcome this problem, steel reinforcement are normally added to produce reinforced concrete which can also withstand tensile forces. Experience shows that environmental conditions may have a negative impact on the durability of reinforced concrete structures resulting in development of defects if not properly assessed and appropriate measures adopted to arrest the same at the design and construction stages.

The severity of damages for the investigated …