Digital Commons Network^™

Multidentate Surfactant-Dependent Synthesis Of Giant Iridium Superstructures, Ramjee Balasubramanian, Maeren E. Hill

Chemistry & Biochemistry Faculty Publications

Giant superstructures of iridium, comprised of smaller spherical and slightly larger anisotropic nanoparticles, were synthesized by reducing iridium chloride in the presence of resorcinarene, a class of tetrameric macrocyclic polyphenols, with sodium borohydride in ethanol in 30 min under mild conditions. These superstructures were characterized by a range of techniques including TEM, HRTEM, EDS and other spectroscopic methods. The impact of the macrocyclic surfactant, its features and reaction conditions in dictating the formation of giant iridium superstructures was evaluated. The packing density of nanoparticles in these giant iridium superstructures could be altered qualitatively by varying the duration of the reaction, …

Exploring The Limitations Of Substrate Scope In Dimethylallyltryptophan Synthases, Evan T. Miller

Theses and Dissertations--Pharmacy

Natural products (NPs), are the largest source of bioactive compounds in Nature, and are essential to the treatment of human disease. Nearly 50% of drugs approved for use from 1981 to 2019 owe some aspect of their development to NPs, either in terms of their structure, pharmacophore, or mechanism of action. However, NPs are difficult to structurally optimize. Chemoenzymatic methods for NP derivatization have been increasingly seen as practical alternatives to traditional synthetic methods. Prenyltransferases (PTs) are involved in the primary and secondary metabolism of plants, bacteria, and fungi, and they are key enzymes in the biosynthesis of many clinically …

Modular Synthesis Of Conjugated Aromatic Systems Via Palladium-Catalyzed Cross-Coupling Reactions, Joden Russell Robinson

Dissertations, Master's Theses and Master's Reports

This thesis describes the development of a modular synthetic route to extended conjugated aromatic systems through iterative palladium-catalyzed Sonogashira crosscoupling reactions. The work was motivated by the challenge of preparing a discrete conjugated molecule in a controlled manner. The synthetic strategy used complementary protected alkyne functionalities that could be selectively activated. This enabled sequential deprotection and coupling reactions to predictably extend the molecular scaffold. Using this approach, a series of conjugated intermediates was prepared and exponentially extended. Spectroscopic characterization by NMR and mass spectrometry supported the structures of the isolated products and the success of the iterative elongation strategy. Overall, …

Feasibility Of Upcycling Spent Lithium-Ion Battery To Carbon Dioxide Capture Adsorbent, Chimezie Frank Onwudinjo

Master’s Theses

This study investigates the feasibility of repurposing spent lithium-ion battery (SLIB) to lithium orthosilicate (Li₄SiO₄), a high temperature carbon dioxide sorbent. Two synthesis pathways including conventional acid-leaching method (Scenario 1) and a pyrolysis-based route (Scenario 2) were explored. Additionally, techno-economic analysis (TEA) and lifecycle assessment (LCA) of the two processes were also performed. Different analytical characterization techniques were performed to understand the material properties of Li₄SiO₄ including surface area, crystallinity, morphology and thermal stability. CO₂ capture performance of the synthesized Li₄SiO₄ was tested in a thermogravimetric analyzer (TGA) using …

Novel Methods For Environmental Fluoride Measurement, Cable Warren

Chemistry & Biochemistry Dissertations

Fluoride analysis has been an important focus of analytical analysis for many years and will continue to be so going forward. Today, fluorinated compounds, specifically per/polyfluoroalkyl substances (PFAS), better known as “forever chemicals” have captured the moment and are the subject of vast research and regulation. Under this context, I have researched new methods of fluoride separation and concentration in complex media as well as a novel method of PFAS destruction and total organic fluorine analysis for screening of PFAS in aqueous samples. Through research and work on micro-scale detection methods, an understanding of the state of the art and …

Pullulan Production From Lignocellulosic Plant Biomass Or Starch-Containing Processing Coproduct Hydrolysates, Thomas P. West

Faculty Publications

The complex polysaccharide pullulan is characterized as a glucose-containing biopolymer that is both water-soluble and neutral in polarity. A variety of commercial applications exist for pullulan, including its utilization as a flocculant, a blood plasma substitute, a food additive, a dielectric material, an adhesive, or a packaging film. The fungus Aureobasidium pullulans has used several hydrolysates derived from plant biomass or starch-containing processing coproducts to support polysaccharide production. These include various plant biomass or processing coproduct streams such as lignocellulosic-containing peat, prairie grass, stalks, hulls, straw, shells, and pods or starch-containing coproducts from the processing of corn, rice, jackfruit seeds, …

Development Of Novel Methods For Investigative Leads In Firearm And Explosive Related Incidents, Addio Joseph Fiordigigli Jr.

Graduate Theses, Dissertations, and Problem Reports (ETD)

Criminal outbreaks and gun violence persist as a multifaceted global crisis, marked by escalating rates of homicide, suicide, and terrorism that destabilize communities and strain public resources. The proliferation of illicit firearms and homemade explosive devices, along with the complexity of modern criminal networks, necessitates innovative scientific tools to strengthen preventive intelligence operations and ensure that the legal process is grounded in physical evidence. More efficient detection of traces left behind at a crime scene can help prevent further harm or injury from follow-up attacks. This study aims to develop and evaluate new triage methods for characterizing gunshot residues (GSR) …

Pipeline Corrosion And Relevant Microbial Influence, Renee E. Bamberger

Williams Honors College, Honors Research Projects

This study investigated the role of microbial activity and oxygen availability in the corrosion of carbon steel pipelines with a focus on microbially influenced corrosion (MIC). Sediment collected from Old Woman Creek, Ohio, was used to simulate natural soil conditions, and carbon steel coupons were incubated under four treatments: nonsterile oxic, nonsterile anoxic, autoclaved oxic, and autoclaved anoxic over 85 days. Corrosion was assessed through mass loss measurements and the analysis of pH, sulfate, chloride, and dissolved iron concentrations. The greatest mass loss was observed in autoclaved oxic conditions, contrary to the initial hypothesis that microbial activity would greatly enhance …

Computer-Aided Molecular Design To Identify More Environmentally Friendly Pfas, Melvin M. Keita

Williams Honors College, Honors Research Projects

The goal of this project is to inversely design alternatives to per- and polyfluoroalkyl substances (PFAS) using Computer-Aided Molecular Design (CAMD). PFAS, also described as “forever chemicals”, have been used in industry and consumer products since the 1940s. PFAS can be found in drinking water, food, food packaging, waste sites, and other sources. Exposure to different PFAS can lead to increased risks of some cancers, immune effects, and reproductive effects. Pulling from existing data, this project will use quantitative structure-property relationships (QSPRs) to design PFAS alternatives that possess optimal properties to prevent adsorption into drinking water and other potential sources …

Scalable Transfer Of Dna Origami–Directed Nanoparticle Arrays Onto Functional Surfaces Using Thermal Release Tape, Yuwei Zhang, Chikadibia Genevieve Edward, Ethan Keuhn, Shelley D. Minteer, Risheng Wang

Chemistry Faculty Research & Creative Works

Precise integration of DNA origami nanostructures onto functional substrates is essential for advancing electronics, photonics, and biosensing. However, most surface-assembly methods are highly sensitive to substrate type, limiting their broader applications. Here, we introduce a thermal release tape (TRT)-assisted transfer method that enables efficient, large-area printing of DNA origami-guided gold nanoparticle (AuNP-DNA origami) arrays from mica onto diverse surfaces. The method relies on differential adhesion: AuNP-DNA origami arrays form strong electrostatic and hydrogen-bonding interactions with 3-aminopropyltriethoxysilane (APTES)-functionalized receiver substrates, while the TRT adhesive weakens upon heating to 120°C, allowing release from the tape. Using this approach, well-ordered AuNP-DNA origami arrays …

Closing The Nitrogen Loop In Groundwater With Biohybrid Technologies, Linjie Zhou, Biao Li, Jianhua Guo, Shelley D. Minteer, Yifeng Zhang

Chemistry Faculty Research & Creative Works

Nitrate in groundwater should be treated as a nitrogen source rather than a contaminant. Biohybrid technologies coupling microbial selectivity with renewable electro(photo)chemical energy offer opportunities to convert nitrate to value-added ammonium, although challenges remain in scalability, microbial stability, material–microbe integration, process engineering, regulatory compliance, and economic feasibility.

Green Modification Of A Coupling Reaction Between N-Acetylated Amino Acids And P-Nitrothiophenol, Kaitlyn S. Marley, Hannah M. Werle, John P. Morgan

SURF Posters 2026

Native Chemical Ligation (NCL) is a process by which smaller peptides can be linked together to form larger peptides and proteins, but the preparation of necessary thioester starting materials often relies on hazardous reagents. We report a greener synthesis of S-(4- nitrophenyl) N-acetylphenylalaninethioate, building upon the methodology reported by Raines et al.1 This literature synthesis uses N,N-dimethylformamide (DMF) as solvent in the final thioester coupling step to accommodate the limited solubility of N-acetylphenylalanine in less polar solvents. However, DMF is a known reproductive toxin and environmental hazard. Our research demonstrates that acidic water serves as a highly effective, benign alternative …

Evaluating The Comparison Of Different Body Locations For Data Collection Using Galvanic Skin Response Of Forensic Chemistry Students When In Lecture And Laboratory Environments, Elisa Guerrero

Honors Undergraduate Theses

Anxiety is the response that humans can have when exposed to a stimulus. It can be caused by a multitude of factors, such as psychological, biological, or physiological stimuli. Anxiety can be presented as a state or as a trait in a person. Trait anxiety is typically seen as a more stable personality trait, whereas state anxiety is a more intense temporary emotional state. In our study, anxiety was regarded as a more state-like characteristic. A galvanic skin response (GSR) Shimmer3+ device can measure skin electro-conductance changes following stimulation. In a situation where a participant is experiencing anxiety, levels of …

Spectroscopic And Structural Characterization Of Unexpected Porphyrinoid Byproducts Resulting From The Reaction Of A Cyclopentadiene Trialdehyde With N-Alkyltripyrranes, Kimberly Le, Gregory M. Ferrence, Timothy D. Lash

Faculty Publications – Chemistry

Acid-catalyzed condensation of N-alkyltripyrranes with a cyclopentadiene trialdehyde, followed by oxidation with aqueous ferric chloride solutions, gave unusual tripyrrolic byproducts in addition to previously reported carbaporphyrins and oxycarbaporphyrins. These stable nonaromatic structures incorporate aldehyde substituents, macrocyclic ketones, two conjugated pyrrole units, and a pyrrolo[1,2-a]pyrrole moiety. The NMR and UV-vis data were consistent with a nonaromatic system, and single-crystal X-ray diffraction confirmed that these structures are highly distorted. Structural characterization of a related aromatic carbaporphyrin triketone was also accomplished.

Connections Between Mathematics And Chemistry: An Interdisciplinary Undergraduate Curricular Initiative, George Ashline, Bret Findley

Journal of Mathematics and Science: Collaborative Explorations

In this article, we describe an undergraduate curricular initiative involving mathematics and chemistry faculty and students. Supported by a grant from the National Science Foundation Scholarships in Science, Technology, Engineering, and Mathematics Program, a program designed to encourage the study of and connections between quantitative fields and life sciences, this interdisciplinary collaboration features undergraduate student research and involves the development of curricular connections between mathematics and chemistry. Through this initiative, we have created activities for calculus courses featuring chemistry applications as well as activities for chemistry courses showcasing mathematical concepts. After the implementation of these curricular enhancements, we gathered student …

Investigation Of Fine-Grain Cu And Cu Alloys For Low-Temperature Hybrid Bonding Applications, Sarabjot Singh

Electronic Theses & Dissertations (2024 - present)

Hybrid bonding has emerged as a key enabler for next-generation three-dimensional (3D) integration, offering fine-pitch interconnects and improved electrical performance. However, conventional Cu–Cu hybrid bonding typically requires elevated temperatures to achieve sufficient diffusion and interface quality, posing challenges for temperature-sensitive device integration and process compatibility. This work investigates materials engineering approaches to enable low-temperature Cu–Cu bonding through both microstructure design and alloying strategies.

This work begins by examining grain refinement in Cu as a pathway to enhance diffusion through increased grain boundary density, providing efficient atomic transport without introducing additional elements. Three Cu-based systems Cu–Co, Cu–Ag, and Cu–Al were systematically …

Development Of Photolabile Coumarin Linker For Rna Synthesis And Crisprcas9 Applications, Ian Mcclain

Electronic Theses & Dissertations (2024 - present)

The scope of RNA-based therapeutics continues to expand as more siRNA, mRNA, and CRISPR-based treatments are approved for various medical applications. Purification of synthetic RNA drugs is inherently challenging and requires considerable time and resources. New cost-effective and efficient purification strategies will expedite drug development process and will lower the drug costs. In this thesis I describe two generations of photolabile linkers for the non-chromatographic purification of therapeutic RNAs. In addition, the photolabile linker was utilized for regulation CRISPR-Cas9 gene editing. In the first part of the thesis, I describe the first generation of the photolabile coumarin-based linker for non-chromatographic …

Evaluation Of Chromium-Crosslinked Amps-Hpam Copolymer Gels: Effects Of Key Parameters On Gelation Time And Strength, Maryam Sharifi Paroushi, Baojun Bai, Thomas P. Schuman, Yin Zhang, Mingzhen Wei

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Controlling CO₂ channeling in heterogeneous reservoirs remains a major challenge for both enhanced oil recovery (EOR) and secure geological storage. AMPS-HPAM copolymers exhibit high-temperature resistance and brine tolerance compared with conventional HPAM gels, making them well suited for the harsh environments associated with CO₂ injection. Chromium-based crosslinkers (CrAc and CrCl₃) were investigated because sulfonic acid groups in AMPS can coordinate with trivalent chromium ions, enabling dual ionic crosslinking and the formation of a robust gel network. While organic crosslinked AMPS-HPAM gels have been widely studied, the behavior of chromium-crosslinked AMPS-containing systems, particularly their gelation kinetics under …

Effect Of Ionic Strength On Gelation Time And Strength Of Amps-Based Polymer Gels, Maryam Sharifi Paroushi, Xuyang Tian, Baojun Bai, Thomas P. Schuman, Yin Zhang, Mingzhen Wei

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Polymer gel treatment has been widely applied for improving sweep efficiency and controlling excessive water and gas production. Their performance depends on gelation time and final gel strength. In most studies, brine salinity is used to describe the effect of formation water on gel behavior. However, changing salinity also changes ionic strength and ion composition at the same time. Because of this coupling, it is difficult to identify the mechanisms controlling gelation, which has led to inconsistent trends in the literature. Increasing salinity has been reported to either slow or accelerate gelation and to weaken or strengthen gels depending on …

Utilizing Coal For Mesophase Pitch-Based Carbon Fiber Production: Precursors, Processes, And Progress, Christina M. Thompson

Theses and Dissertations--Chemistry

Graphitic materials possess unique properties due to the unique combination of layered crystalline structure and carbon’s low atomic weight. High performance carbon fiber is one such example, displaying exceptional strength-to-weight ratios, stiffness, and thermal and chemical resistance. These properties render high performance carbon fiber a critical structural reinforcement material in the manufacture of composites across various industries, such as for automotive and aerospace applications. However, balancing fiber performance with precursor and processing costs remains a challenge. As alternative carbonaceous feedstocks are explored, coal has gained interest for utilization in graphitic products as a relatively abundant and low-cost source of aromatic …

Elucidating The Impacts Of Non-Covalent Interactions In Organic Materials Through A Multiscale Computational Approach, Sashen A. Ruhunage

Theses and Dissertations--Chemistry

Noncovalent interactions (NCIs) in π-conjugated organic materials serve as tunable levers that influence molecular structure and intermolecular interactions in the condensed phase and, in turn, impact the electronic, optical, and mechanical properties of these materials. NCIs include attractive dispersion, electrostatic, and induction interactions, as well as repulsive exchange interactions. However, how to design materials with NCI considerations remains an open question across many fields. Here, we seek to provide an electronic and atomistic perspective on these interactions through multiscale simulations to aid materials design, processing, and performance optimization. In this study, we investigate NCIs and their effects across various systems …

Evaluation Of A Novel Re-Crosslinkable Preformed Particle Gel For Conformance Control In Ultra-High Temperature Reservoirs, Yanbo Liu, Tao Song, Caleb Kwasi Darko, Thomas P. Schuman, Mingzhen Wei, Baojun Bai

Chemistry Faculty Research & Creative Works

Preferential fluid flow remains a major challenge in subsurface energy production and gas storage operations, resulting in excessive water production in mature oil fields, reduced heat extraction in geothermal reservoirs, and low sweep and storage efficiency in CO₂-EOR projects. Polymer gels are widely used to mitigate high-permeability channels; however, conventional systems exhibit limited plugging efficiency and short lifetimes in ultra-high-temperature reservoirs due to poor thermal stability. This study presents a novel ultra-high-temperature-resistant preformed particle gel (UHT-PPG) developed for conformance control in reservoirs with temperatures of 150–275 °C and severe super-K or channeling problems. The material was evaluated in …

Progression Toward Terminal Oxidation Of Starch Via Hybrid Organic–Enzymatic Bioanode For Renewable Carbohydrate Conversion, Adam Milam, Jose Intano, Shelley D. Minteer

Chemistry Faculty Research & Creative Works

The performance of starch-based biofuel cells is fundamentally limited by inefficient utilization of the fuel's inherent energy density. Sequential oxidation of carbohydrate fuels, such as glucose, the monomeric unit of starch, using minimal catalyst systems has therefore emerged as a promising strategy to improve biofuel cell efficiency. Here, we extend a previously reported three-catalyst, organic–enzymatic glucose oxidation cascade to polymeric carbohydrate fuels by integrating enzymatic starch depolymerization with downstream electrochemical oxidation. To our knowledge, this represents the first demonstration of a defined hybrid organic–enzymatic cascade designed to drive progression of starch-derived glucose equivalents toward terminal oxidation using a minimal catalyst …

Multi-Isotope Tracing Reveals Nitrate And Sulfate Sources And Fate Across Contrasting Activity Zones In A Semi-Arid Basin Of Northern China, Chang Yue, Ruizhong Gao, Limin Duan, Tianke Su, Xixi Wang, Tingxi Liu, Guoqiang Wang

Civil & Environmental Engineering Faculty Publications

In semi-arid surface water-groundwater systems, nitrate (NO₃^–) and sulfate (SO₄²^–) are jointly influenced by natural processes and anthropogenic activities, yet how their sources, transformations, and export vary across contrasting activity zones remains insufficiently understood. Integrating hydrochemistry, multiple stable isotopes, a Bayesian isotope mixing model, and representative-section flux analysis, this study investigated the source compositions, transformation processes, and export differences of NO₃^– and SO₄²^– in the Dahei River Basin.   New hydrological insights for the region: Results showed greater SO₄²^– enrichment in high-activity zones, whereas NO₃^– exceedance was more prominent in low-activity zones. In …

Assessing Dissolved Organic Matter Sources And Dynamics In Urban Stormwater: Implications For Greenhouse Gases, Harper W. Schmalz

Theses and Dissertations (Comprehensive)

Stormwater management ponds (SWMPs) are important aspects of land-use planning and increasingly recognized as active sites of biogeochemical processing that influence carbon cycling; however, little research has investigated the controls on dissolved organic and dissolved inorganic carbon (DOC and DIC) within these systems. This thesis examined the processing and transformations of dissolved carbon between three compartments to support the development of a greenhouse gas (GHG) box-model for urban stormwater ponds, including SWMP sediment, surface water, and vegetation. The objective of this thesis was to assess the biogeochemical processes that govern the rate and transformation of DOC and DIC between these …

Multiscale Modeling Of The Thermomechanical Behavior Of Polymeric And Molecular Organic Semiconductors, Kehinde H. Fagbohungbe

University of Kentucky Doctoral Dissertations

Organic semiconductors, derived from π-conjugated polymers and molecules, enable the development of deformable, stretchable and flexible electronics due to their tunable redox, optical, electronic and mechanical properties. However, an informed understanding of how multi-scale morphological characteristics of the polymeric and molecular semiconductors influence bulk properties that contribute to electronic and optical performance, especially under operational thermal and mechanical stresses, remains incomplete. This lack of understanding poses a challenge to scalability and commercialization of organic electronics. This dissertation develops and deploys computational modeling approaches, particularly atomistic molecular dynamics (MD) simulations, to investigate the multiscale morphological behavior of these synthetic semiconducting materials …

The Chemistry Of Red Lipstick: The Impact Red Lipstick Has On Society, Lilliana Weldeslassie

Electronic Theses & Dissertations (2024 - present)

Cosmetic chemistry is deeply embedded in everyday life, shaping the products people use from morning to night. Among these, red lipstick stands out as a formulation that blends complex chemistry with a cultural meaning. This thesis examines the scientific foundations of red lipstick through its chemical composition, pigment structure, toxicological history, analytical methods, and evolving sustainability practices. Historically, red lipsticks relied on high-risk ingredients such as lead, mercury, and other toxic metals, reflecting an era before chemical safety and regulatory oversight were incorporated.²¹ Modern formulations have established safer synthetic dyes, natural waxes, plant-based oils, and stabilizers created to optimize …

Corannulene: Optimized Synthesis And Four-Fold Reduction, Guy Rozenman

Electronic Theses & Dissertations (2024 - present)

Corannulene is a bowl-shaped π-conjugated fragment of the ball-shaped C₆₀-fullerene that undergoes stepwise multielectron reduction and can accept four electrons to form the aromatic tetraanion, C₂₀H₁₀⁴⁻. Prior literature has established this charge state in donor-solvated alkali-metal assemblies: early solution studies identified the formation of the tetraanion under lithium reduction in THF, and later X-ray diffraction crystallography demonstrated a triple-decker lithium sandwich in which two corannulene tetraanion decks encapsulate five Li⁺ ions. The central objective of this thesis is to determine whether the corannulene tetraanion can instead be isolated as a bulk solvent-free alkali-metal salt containing only corannulene and …

Improving Modeling Of Corrosion Products In The Primary Circuit Of Light Water Reactors Through The Experimental Determination Of Crud Characteristics, Sri Saravana Konganapuram Narasimma Bharathi

Electronic Theses & Dissertations (2024 - present)

High-temperature water flowing through the coolant circuits in pressurized water reactors (PWRs) creates a harsh environment, deteriorating these materials. This corrosion results in the formation of oxide layer(s) primarily composed of nickel ferrites, iron oxides, nickel oxides, and other nickel-iron-chrome spinel oxides. Being exposed to fluid with high flow rates and pressure, these oxide layers can be eroded, resulting in particulate fouling due to the release of corrosion products (Chalk River Unidentified Deposits, CRUD) into the coolant circuit. When CRUD subsequently deposits on fuel surfaces, it negatively affects the fuel performance (heat transfer and fuel failure); in addition, the particles …

Nanostructured Cathode Catalysts For Aem Electrolysis: From Catalyst Design To Degradation And Hydrogen Dynamics, Yamini Kumaran

Electronic Theses & Dissertations (2024 - present)

Anion exchange membrane water electrolysis (AEMWE) presents a promising pathway toward cost-effective and sustainable hydrogen production by integrating the chemical robustness of alkaline systems with the compact, zero-gap design of proton exchange membrane electrolyzers. However, the widespread implementation of AEMWE is limited by the availability of highly active and durable platinum-group-metal (PGM)-free catalysts and by an incomplete understanding of their degradation behavior under realistic operating conditions.

This dissertation focuses on the development, characterization, and mechanistic investigation of nanostructured MoNi₄–MoO₂-based electrodes for efficient and stable hydrogen generation under alkaline and membrane-integrated environments. MoNi₄–MoO₂ nanorods …