Digital Commons Network^™

Graphene Aerogels: Part 2 - Derived From Commercial Graphene And Chemically Reduced Graphene Oxide Via Supercritical Carbon Dioxide Drying, Meryem Samanci, Ayşe Bayrakçeken

Turkish Journal of Chemistry

Graphene aerogels (GAs), the most important class of carbonaceous aerogels, have attracted attention of many researchers due to their superior physical and chemical properties. In this study, commercial graphene (GR) and chemically reduced graphene oxide (RGO) were used as graphene-based precursor materials, unlike graphene oxide (GO), which is widely used in the literature in GA synthesis. GAs were synthesized using the sol-gel technique and dried with supercritical carbon dioxide (SCCO2). In addition, graphene-based materials were used in different ratios and their distribution in the aerogel matrix and its effect on surface properties were investigated. In addition, the synthesized GAs were …

Evaluation Of P(Hema-Co-Nipam) Hydrogels For Removal Of Methylene Blue From Aqueous Solution:Isotherm, Kinetic, And Thermodynamic Studies, Hayri̇ye Mi̇ne Antep, Müni̇re Nalan Demi̇r, Cevher Gündoğdu Hizliateş, Si̇mge Öztürk, Eli̇f Esen

Turkish Journal of Chemistry

In this study, a novel adsorbent material, poly (2-hydroxyethyl methacrylate-co-N-isopropyl acrylamide) (p(HEMA-co-NIPAM) hydrogel, was synthesized for the purpose of removing methylene blue (MB) from aqueous media. The synthesis of hydrogel was carefully conducted, and its properties were thoroughly examined using techniques such as Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and thermogravimetric analysis (TGA). The adsorption experiments conducted revealed a remarkable affinity of p(HEMA-co-NIPAM) hydrogel towards MB. The highest adsorption was observed when 0.05 g of the adsorbent were utilized, with optimal conditions at a pH of 6.0 and a temperature of 15 °C. This underscores the importance of …

Construction Of Hyperbranched Imprinted Nanomaterials For Selective Adsorption Of Cadmium (Ii), Sheng Nan Hu, Xinyu Zhang, Ming Guo, Shengchun Wu, Wenjun Lu

Turkish Journal of Chemistry

A hyperbranched ion-imprinted polymer (IIP) material containing multiple selective adsorption sites was synthesized using halloysite nanotubes, methyl acrylate, and ethylenediamine in the presence of a template ion [i.e. Cd (II) heavy metal]. The successful preparation of the Cd-IIP composition was confirmed by FT-IR, XRD, TEM, TGA, and elemental analysis. The polymers exhibited good adsorption of Cd (II) with a maximum adsorption capacity of 64.37 mg·g–1. The imprinting factor (α) for Cd (II) was 2.62 and the selection factor (β) was 1.78, indicating a specific adsorption of Cd (II) ion. The selection coefficients of Cd-IIP for Cd (II)/Pb (II), Cd (II)/Cu …

Preparation Of Cholesterol-Imprinted Polymer For Selective Adsorption Of Cholesterol From Gastrointestinal Mimicking Solution, Veyi̇s Karakoç, Erol Erçağ

Turkish Journal of Chemistry

The purpose of this study is to synthesize a highly selective adsorbent to remove cholesterol, one of the most important causes of cardiovascular diseases, from the intestinal mimic solution (IMS). For this purpose, cholesterol imprinted polymers were synthesized by suspension polymerization method using the molecular imprinting technique. In the first step, the functional monomer MATyr with hydrophobic character was synthesized. Then, the cholesterol-MATyr monomer precomplex was formed and the polymerization process was carried out by adding cross-linkers with the comonomer HEMA. The synthesized polymer poly(2-hydroxyethyl methacrylate-N-methacryloyl-(L)-tyrosine methylester) poly(HEMA–MATyr) was characterized by FTIR and SEM. The cholesterol adsorbing behavior of the …

Chemical And Physiological Interactions Between E-Liquid Constituents: Cause For Concern?, Robert M. Strongin, Eva Sharma, Hanno C. Erythropel, Nada O F Kassem, Alexandra Noël, D H. Peyton, Irfan Rahman

Chemistry Faculty Publications and Presentations

Studies of Electronic Nicotine Delivery Systems (ENDS) toxicity have largely focused on individual components such as flavour additives, base e-liquid ingredients (propylene glycol, glycerol), device characteristics (eg, model, components, wattage), use behaviour, etc. However, vaping involves inhalation of chemical mixtures and interactions between compounds can occur that can lead to different toxicities than toxicity of the individual components. Methods based on the additive toxicity of individual chemical components to estimate the health risks of complex mixtures can result in the overestimation or underestimation of exposure risks, since interactions between components are under-investigated. In the case of ENDS, the potential of …

Predictors Of Student Success In College-Level General Chemistry, Elijah J. Engler, Clarice Ak Kelleher

Binghamton University Undergraduate Journal

Success in college-level general chemistry is important because it is a required course for many different STEM majors and student success in early STEM classes correlates with retention of students in STEM. Identifying factors associated with success and failure can give educators a better understanding of the warning signs to look out for in struggling students. This paper compares factors and behaviors with final grades in general chemistry courses at Binghamton University, including adjectives selected from a word bank (“valued,” “supported,” etc.), resources used, and opinion on group work as it relates to learning. Correlations were found between student adjective …

One-Pot Synthesis Green Zinc Oxide Nanoparticles Immobilized On Activated Carbon Derived From Pineapple Peel For Adsorption Of Pb(Ii), Vienna Saraswaty, Evyka Setya Aji, Ardi Ardiansyah, Ayu Hanifah, Nathania Puspitasari, Shella Permatasari Santoso, Sandy Budi Hartono, Chandra Risdian, Elsy Rahimi Chaldun, Henry Setiyanto

Karbala International Journal of Modern Science

The current study introduces a one-pot technique for synthesizing an environmentally benign and cheap composite adsorbent, namely ZnO-PPAC, for the adsorption of Pb(II). The designated adsorbent was prepared by incorporating green synthesized zinc oxide (ZnO) nanoparticles on activated carbon-derived from pineapple peel. The prepared adsorbents were characterized using XRD, SEM, EDS, FTIR, and BET techniques. The XRD pattern verifies that the ZnO was successfully synthesized and immobilized onto the PPAC in a one pot synthesis system. The surface areas of ZnOPPAC and PPAC adsorbents were 13.62 m2/g and 961.96 m2/g, respectively. The FTIR evaluation of the ZnO-PPAC adsorbent revealed several …

Ruthenium Metal Complex Interaction With Dna Of Tumor Cells, Danielle N. Baca

Research & Creative Achievement Day

In this project, computational chemistry was used to dock variations of (p-Cymene)Ru(curcuminato)chloro (Ru-cur) in DNA strands to find the best affinity for potential anti-cancer drugs. The Ru-cur complex has been chosen as the metal anticancer complex because it is not very toxic, selective for cancer cells, and has ligand exchange kinetics similar to those of platinum. First the geometry of the Ru-cur complex was optimized via a quantum mechanical method. The GAMESS program was used for this portion. Once the geometry of the complex was optimized, docking programs were explored to find the best docking poses and binding energies for …

Allylic Rearrangement In Nbs Bromination Reactions, Devann J. Harris, Bryanna L. Wichner

Research & Creative Achievement Day

The allylic bromination of alkenes using N-bromosuccinimide (NBS) is a useful and selective substitution reaction, in which bromine radicals abstract hydrogen from the alkene to form a resonance-stabilized radical intermediate. However, allylic rearrangement can be a consequence of the intermediate's two resonance structures. Some literature sources imply that NBS bromination gives only one major product from asymmetrical alkenes, e.g., 2-hexene and 2-heptene, even when they should form equally stable but non-equivalent resonance contributors. In this research, bromination of trans-2-hexene was performed using cyclohexane as the solvent, and the products were analyzed using GC-MS to determine if only one product, 4-bromo-2-hexene, …

Analysis Of Rabies Neutralizing Antibody Titers In The Feline Population Of Winona County, Olivia M. Hendrickson, Jensen K. Christensen

Research & Creative Achievement Day

Canine rabies vaccination, vital for both animal and human health, is well studied and understood. In contrast, our understanding of feline rabies vaccinations, particularly with those that have a compromised immune status, is much less comprehensive. The purpose of this project is to enhance our current knowledge of feline vaccination states through a surveillance study on the feline rabies antibody titer in Winona County's cat population. Specifically, we seek to explore the relationship between an individual feline's immune status and their active anti-rabies antibody titer. To achieve this, we conducted a bicinchoninic acid (BCA) protein assay to determine the total …

Making Mutations In A Vrk1 Plasmid, Madeline M. Thoemke

Research & Creative Achievement Day

One of the most common types of mutations is point mutations, which change a single amino acid, sometimes by changing a single nucleotide. These mutations can cause the protein to fold incorrectly or change how it interacts with other molecules. This research used biochemistry methods to prepare mutated proteins to simulate their behavior in the body. Mutations in the protein VRK1 were chosen for this project. VRK1 is present in human tissues and influences cellular division and RNA processing.VRK1 mutations P79L, A66G, and R219Ihave been linked to neurological disorders and were chosen for this project. Our procedure used biochemistry techniques …

Investigating Chemotherapeutic Resistance In Glioblastoma Multiforme A, Katrina M. Yaeger

Research & Creative Achievement Day

Glioblastoma (GBM) multiforme A is a highly variable, grade four cancer that affects the glial tissues of the brain and spinal cord. Cancer cells, including GBM, have purine metabolism markers that make them distinguishable for biochemical research, marked through the rate limiting step in the conversion of inosine monophosphate (IMP) to guanosine triphosphate (GTP), catalyzed by inosine monophosphate dehydrogenase (IMPDH). Cell cultures for both 3T3 cells, used to study normal cell cycles, and GBM cells were grown and replicated, until sufficient cells existed to extract the desired proteins. These proteins were then run through a gel electrophoresis apparatus, followed by …

Developing An Enzymatic Assay For Wine Analysis, Taylor M. Pagel

Research & Creative Achievement Day

During malolactic fermentation (MLF), malic acid is fermented into lactic acid by the bacteria Oenococcus oeni. During this process, malic acid is then converted into lactic acid, converting sour flavors in the wine to buttery. Here we present an enzymatic method to determine the malate/lactate ratio of wines during MLF. Fresh juice samples had detectable amounts of malate, while wine samples had mixed results, as expected. MLF was initiated in a freshly fermented pre-MLF sample of St. Pepin wine and a decreasing trend of malate over time was detected, as predicted. This was compared to increasing levels of lactate in …

Late 3d Transition Metal Complexes Of Bis(Diphenylphosphino)Methane Dichalcogenide Ligands, Connor J. Lehner

Research & Creative Achievement Day

Complexes of bis(diphenylphosphino)methane dichalcogenides (dppmE2, E = O, S, Se) have been prepared for Co(II), Ni(II) and Cu(II) by combination with respective nitrate salts. These ligands are relatively unexplored for 1st row transition metals – with no existing reports of metal complexes for dppmSe2. All obtained complexes were paramagnetic precluding characterization by NMR spectroscopy. An array of methods have been employed to ascertain the structural and electronic forms of all obtained complexes as both tetrahedral and octahedral geometries, corresponding to systems with two or three ligands, respectively, are plausible. Additionally, Co(II) complexes, as d7 systems, could be found in either …

Influence Of Proteins And Building Direction On The Corrosion And Tribocorrosion Of Cocrmo Fabricated By Laser Powder Bed Fusion, Masoud Atapour, Thalia E. Standish, Jeffrey D. Henderson, Zheng Wei, Vahid Dehnavi, Yolanda S. Hedberg

Chemistry Publications

Cobalt–chromium–molybdenum (CoCrMo) alloys are common wear-exposed biomedical alloys and are manufactured in multiple ways, increasingly using additive manufacturing processes such as laser powder bed fusion (LPBF). Here, we investigate the effect of proteins and the manufacturing process (wrought vs LPBF) and building orientation (LPBF-XY and XZ) on the corrosion, metal release, tribocorrosion, and surface oxide composition by means of electrochemical, mechanical, microscopic, diffractive, and spectroscopic methods. The study was conducted at pH 7.3 in 5 g/L NaCl and 5 mM 2-(N-morpholino) ethanesulfonic acid (MES) buffer, which was found to be necessary to avoid metal phosphate and …

Scanning Electrochemical Microscopy Reveals That Model Silicon Anodes Demonstrate Global Solid Electrolyte Interphase Passivation Degradation During Calendar Aging, Josefine D. Mcbrayer, Noah B. Schorr, Mila Nhu Lam, Melissa L. Meyerson, Katharine L. Harrison, Shelley D. Minteer

Chemistry Faculty Research & Creative Works

Silicon is a promising next-generation anode to increase energy density over commercial graphite anodes, but calendar life remains problematic. In this work, scanning electrochemical microscopy was used to track the site-specific reactivity of a silicon thin film surface over time to determine if undesirable Faradaic reactions were occurring at the formed solid electrolyte interphase (SEI) during calendar aging in four case scenarios: formation between 1.5 V and 100 mV with subsequent rest starting at (1) 1.5 V and (2) 100 mV and formation between 0.75 V and 100 mV with subsequent rest starting at (3) 0.75 V and (4) 100 …

2023 Rising Stars In Measurement Science, Shelley Minteer

Chemistry Faculty Research & Creative Works

No abstract provided.

Seeding Effects Of Submicron Caal-No3 Ldh Particles On The Hydration And Properties Of Portland Cement And Sulfoaluminate Cement Pastes, Sukanta K. Mondal, Monday Uchenna Okoronkwo

Chemical and Biochemical Engineering Faculty Research & Creative Works

Layered double hydroxide (LDH) is reported to improve the durability of concretes, primarily due to its ability to exchange anionic species, including chloride, which is implicated in corrosion-driven durability issues. However, there is no comprehensive study investigating the effect of LDH on the properties of different cement systems at both early and mature ages. in this study, the early age and mature age properties of Portland cement (OPC) and calcium sulfoaluminate (CSA) cement pastes seeded with submicron-sized calcium aluminum-NO3 LDH (CaAl-NO3 LDH) were investigated. the effects of the 1–5%mass dosage of LDH on the hydration of both cement systems were …

Quantifying Asphalt Binder Uv Effects With Relaxometry, Rosalee Brown

Undergraduate Research Conference at Missouri S&T

Asphalt deterioration involves many physical and chemical changes caused by environmental factors such as automotive strain, extreme heat, and UV exposure. Asphalt binder assessment in the industry is currently based on structurally destructive testing methods and tests of physical performance without accounting for chemical structure. An emerging evaluation of asphalt binder uses relaxometry, a field of nuclear magnetic resonance (NMR) spectroscopy, to directly observe how asphalt binder is changed by causes of deterioration such as UV exposure. NMR relaxometry explores nuclear spins' interactions with their environment. This noninvasive method can provide a detailed view into the chemical environment of virgin …

Iron Doped Zeolitic Materials For Propane Dehydrogenation Catalyst, Emily Cahill, Amitava Choudhury

Undergraduate Research Conference at Missouri S&T

This research describes the synthesis of iron-doped zeolitic catalysts for the transformation of propane to propylene. The goal of this research is to develop a dehydrogenation catalyst to convert shale-gas derived cheap propane feedstock to economically valuable propylene, while at the same time making this catalyst sustainable and non-toxic to the environment. Fedoped zeolitic frameworks have shown promising activity in percentage of conversion and in selectivity. In our study we analyzed zeolites ZSM-5 and AIP0-5. These were chosen because they have differences in pore structure , channel sizes, and connectivity between channels. Most importantly the differences in the chemistry as …

Ultrasoft Platelet-Like Particles Stop Bleeding In Rodent And Porcine Models Of Trauma, Kimberly Nellenbach, Emily Mihalko, Seema Nandi, Drew W. Koch, Jagathpala Shetty, Leandra Moretti, Jennifer Sollinger, Nina Moiseiwitsch, Ana Sheridan, Sanika Pandit, Maureane Hoffman, Lauren V. Schnabel, L. Andrew Lyon, Thomas H. Barker, Ashley C. Brown

Engineering Faculty Articles and Research

Uncontrolled bleeding after trauma represents a substantial clinical problem. The current standard of care to treat bleeding after trauma is transfusion of blood products including platelets; however, donated platelets have a short shelf life, are in limited supply, and carry immunogenicity and contamination risks. Consequently, there is a critical need to develop hemostatic platelet alternatives. To this end, we developed synthetic platelet-like particles (PLPs), formulated by functionalizing highly deformable microgel particles composed of ultralow cross-linked poly (N-isopropylacrylamide) with fibrin-binding ligands. The fibrin-binding ligand was designed to target to wound sites, and the cross-linking of fibrin polymers was designed …

An Undergraduate Laboratory Module Integrating Organic Chemistry And Polymer Science, Arya Patel, Michael Arik, Amrita Sarkar

Department of Chemistry and Biochemistry Faculty Scholarship and Creative Works

Polymer science is receiving wider acceptance in the organic chemistry community; thus, it is imperative to include it in the undergraduate organic chemistry curriculum. Despite the ever-increasing popularity of the topic of polymer chemistry in undergraduate curricula, a comprehensive laboratory experiment module describing a polypeptide synthesis by ring-opening polymerization of N-carboxyanhydride (NCA ROP) and a homopolymer synthesis by activators-regenerated by electron-transfer for atom transfer radical polymerization (ARGET ATRP) has yet to be proposed. Herein, we report a semester-long, ten week undergraduate laboratory module focusing on the synthesis and analytical characterization of polyalanine and polystyrene for an advanced organic chemistry class. …

Extraction Of Sandalwood Essential Oil: Isolating Α/Β-Santalol, Maeren Horton

Dr. Jay W. Boland Undergraduate Research Symposium [2023-2024]

Sandalwood oil is a high-value essential oil extracted from the heartwood of East Indian Sandalwood (Santalum album) and Australian Sandalwood (Santalum Spicatum) and is prominent in numerous luxury perfume brands due to its exotic, versatile, and pleasant fragrance. α-Santalol, the main aromatic constituent in S. album and S. spicatum, exhibits anti-aging, antioxidant, anti-inflammatory, and potential anti-cancer properties, accounting for the oil’s medicinal and dermatologic applications. High demand of the oil resulted in excessive harvesting of sandalwood trees, necessitating a need to develop more efficient and sustainable extraction methods. This study investigates the efficiency of traditional extraction methods of sandalwood oil …

Thermal Frontal Polymerization – Applications In Coatings And Composites, Maria Martinez

LSU Doctoral Dissertations

Thermal frontal polymerization has long been used as a method to cure composites and coatings. However, this is the first time these applications have been used without the use of a catalyst, for the case of composites and coatings.

Chapter 2 discusses how to optimize cure-on-demand, thin layer coatings, using frontal polymerization. Previously, for the use of curing thin layer coating using thermal FP, it was known to just make the formulation viscous enough, as this would prevent premature quenching caused by heat loss. It was discovered that for a given layer thickness, a minimum viscosity and initiator concentration were …

Group Iv Topological Quantum Alloy And The Role Of Short-Range Order: The Case Of Ge-Rich Ge1–XPbX, Yunfan Liang, Shunda Chen, Xiaochen Jin, Damien West, Shui-Qing Yu, Tianshu Li, Shengbai Zhang

Electrical Engineering and Computer Science Faculty Publications and Presentations

Despite the explosion of interest in topological materials over the last decades, their applications remain limited due to challenges in growth and incorporation with today’s microelectronics. As a potential bridge to close this gap, we investigate the group-IV alloy Ge_1–xPb_x, in the Ge-rich condition using density functional theory and show that relatively low concentrations of Pb (~9.4%) can lead to a topological phase transition. Furthermore, the calculation of the Z₂ invariant for both the random alloy and the alloy with short-range order (SRO) indicate that the topological phase of the material can be directly modified …

Activated Carbon Derived From Cucumber Peel For Use As A Supercapacitor Electrode Material, Meruyert Nazhipkyzy, Gulim Kurmanbayeva, Aigerim Seitkazinova, Esin Apaydın Varol, Wanlu Li, Balaussa Dinistanova, Almagul Issanbekova, Togzhan Mashan

Department of Chemistry and Biochemistry Faculty Scholarship and Creative Works

Biowaste conversion into activated carbon is a sustainable and inexpensive approach that relieves the pressure on its disposal. Here, we prepared micro-mesoporous activated carbons (ACs) from cucumber peels through carbonization at 600 °C followed by thermal activation at different temperatures. The ACs were tested as supercapacitors for the first time. The carbon activated at 800 °C (ACP-800) showed a high specific capacitance value of 300 F/g at a scan rate of 5 mV/s in the cyclic voltammetry and 331 F/g at the current density of 0.1 A/g in the galvanostatic charge–discharge analysis. At the current density of 1 A/g, the …

Chemistry Matters Spring 2024, Otterbein University Chemistry Department

Chemistry Matters Department Newsletter

In this Issue:

Letter from the Chair; Johnston Receives National Science Foundation Grant; Students and Faculty Travel to National Scientific Meetings; Department Acquires New Instrument; Chemistry Educators; Faculty Publish Book Chapters; Farewell to our Spring 2023 Graduates and Farewell to the Grote Family; Science Lecture Series Brings Dr. Diana Aga to Campus; Faculty Receive Recognition; A Wide Range of Undergraduate Chemistry Research Projects are Ongoing on Campus During 2023-24; High School Teachers Explore Art and Chemistry; The Cardy Chemistry Cluster; Students in the Department Earned Awards for Excellence.

Self-Assembly Of Core-Substituted Naphthalene Diimide Based Palladium (Ii) And Platinum (Ii) Macrocycles, Samantha Aragon, Camille Kwan, Franchesca Tinacba

Posters - 2024

Coordination-driven self-assembly is an efficient way to create 2D and 3D supramolecular coordination complexes (SCC) due to its predictable features of metal coordination. SCC’s represent a growing area of research with applications in various fields such as host-guest chemistry, catalysis, chemical transfer and separation, and stabilization of its reactive intermediate. Integrating various fluorophore/chromophore into these SCC’s results in unique properties and functions. In this project, core-substituted naphthalenediimide (NDI) based macrocycles were constructed via self-assembly with 90° platinum (II) and palladium (II) phosphane triflates.1H NMR and 31P NMR studies of the self-assembled product in various nonpolar to polar solvents showed two …

Impact Of Pulsed Electric Field Treatment On Barley Germination For Malting, Rose Saxton, Caitlin Lahey, Brianna Smith, Emily Hibberd, Joshua Bevan, Cini Baumhoff, Ashley Galant, Jerry Young, Brian Meyer, Owen M. Mcdougal

Chemistry and Biochemistry Faculty Publications and Presentations

The malting process takes one week to steep, germinate, and kiln barley to make malt. Making quality malt is critically important to achieve the desired attributes of the finished beer, and the process is time-intensive and costly. Malt quality is assessed by indicators including β-glucan quantity, α-amylase activity, Free Amino Nitrogen (FAN) content, and overall extract concentration in the finished malt. Here, we report Pulsed Electric Field (PEF) treatment of barley to accelerate malt production. A small-scale trial of 250 g to 1.00 kg barley, was evaluated for germination at two PEF treatment conditions, generically referred to as “low” and …

Decoding Molecular Recognition Mechanism Of Small Molecule Ligand-Rna Binding Pocket Systems Using Molecular Dynamics And Metadynamics, Zhixue Bai

Legacy Theses & Dissertations (2009 - 2024)

From my PhD research, under Amber99-Chen-Garcia force field, umbrella sampling and MD simulation helped us found that the 2’-5’ phosphodiester RNA backbone linkage modification on in vitro selected neomycin RNA aptamer can transfer it to ‘amikacin RNA aptamer’ by changing the conformation and backbone rigidity of the RNA binding pocket, which further influenced the binding mode and binding pathway of amikacin. Furthermore, under the same force field, metadynamics was found more powerful for simulating the binding pathway, binding mechanism and predicting binding modes of small molecule ligand recognizing its RNA target by filling up all energy basins on free energy …