Digital Commons Network^™

On-Road Remote Sensing Of Automobile Emissions In The Chicago Area: Year 5, September 2002, Gary A. Bishop, Mitchell J. Williams, Daniel A. Burgard, Donald H. Stedman

Fuel Efficiency Automobile Test Publications

No abstract provided.

Modeling And Control Of Vinyl Chloride In Drinking Water Distribution Systems, Michael Beardsley, Craig D. Adams

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

In water distribution systems containing PVC pipe manufactured in the "early era" (prior to 1977), vinyl chloride can leach into drinking water resulting in vinyl chloride concentrations exceeding the 2 μg·L-1 maximum contaminant level. Field testing of dead-end segments of water distribution systems consisting of early-era PVC pipe was conducted to examine their initial intrapipe vinyl chloride monomer (VCM) concentrations based on a Fickian-diffusion-Based leaching model. the experiments showed a wide range of VCM concentrations within early-era PVC pipe ranging from less than 50 to more than 600 mg·kg-1. based on the diffusion modeling approach, a protocol was designed that …

Thermochemistry And Kinetics In Pyrolysis And Oxidation Reaction Of Oxygenate Chlorocarbons, Neopentane, And Ortho-Xylene, Hongyan Sun

Dissertations

Thermochemical properties of chlorinated alcohols, chlorinated hydroperoxides and corresponding alkoxy, hydroxy alkyl radicals, peroxy and hydroperoxy alkyl radicals are determined by ab initlo and density functional calculations for modeling and optimization of complex chemical processes for combustion or incineration of chlorinated hydrocarbons. The entropy and heat capacities from vibrational, translational, and external rotational contributions are calculated by statistical mechanics, and the hindered rotational contributions to S^°₂₉₈ and C_p(T)'s are calculated by using direct integration over energy levels of the internal rotational potentials. The values of ΔH_f^°₂₉₈ are determined using isodesmic reactions …

Synthesis And Application Of Novel Chiral Ionic Liquids Derived From Alpha-Pinene, Yun Wang

Theses

Two new chiral ionic liquids of oxazolinium cations derived from a-pinene: 9,9-Dimethyl-4-propenyl-5-propyl-3 -oxa-5-azonia-tricyclo [6.1.1.0 ^2,6] dec-4-ene tetrafluoro borate ([ChIPOZ] [BF₄]) and 9,9-Dimethyl-4-propenyl-5-propyl-3-oxa-5-azonia-tricyclo [6.1.1.0 ^2,6] dec-4-ene hexafluoro phosphate ([ChIPOZ][PF₆]). Both these chiral ionic liquids have been applied in enantiomeric copper-catalyzed 1,4-addition reactions with diethyl zinc. The enantiomeric excess for product using [ChIPOZ][BF₄] is above 70% and for [ChIPOZ][PF₆] is above 30%. Chiral ionic liquids worked as phase transfer catalysts In this reaction.

α-Pinene was used as the "chiral pool" in the synthesis of amino alcohol through a two-step reaction, followed by …

Modeling Corrosion In Oxygen Controlled Lbe Systems With Coupling Of Chemical Kinetics And Hydrodynamics-Task V: Fourth Quarterly Report 06/01/2003-08/30/2003, Samir Moujaes, Yitung Chen

Transmutation Sciences Materials (TRP)

The Lead-Bismuth eutectic (LBE) has been determined from previous experimental studies by the Russians and the European scientific community to be a potential material that can be used as a spallation target and coolant for the TRP proposed application. Properly controlling the oxygen content in LBE can drastically reduce the LBE corrosion to structural steels. However, existing knowledge of material corrosion performance was obtained from point-wise testing with only very sparse experimental data. Scientists have noticed that the concentration of oxygen dissolved in the liquid alloy could control the corrosion rate of steels exposed to Pb or Pb-Bi. At high …

Modeling Corrosion In Oxygen Controlled Lbe Systems With Coupling Of Chemical Kinetics And Hydrodynamics-Task V: Annual Report -Phase Ii 09/01/2002-08/30/2003, Samir Moujaes, Yitung Chen

Transmutation Sciences Materials (TRP)

The Lead-Bismuth eutectic (LBE) has been determined from previous experimental studies by the Russians and the European scientific community to be a potential material that can be used as a spallation target and coolant for the TRP proposed application. Properly controlling the oxygen content in LBE can drastically reduce the LBE corrosion to structural steels. However, existing knowledge of material corrosion performance was obtained from point-wise testing with only very sparse experimental data. Scientists have noticed that the concentration of oxygen dissolved in the liquid alloy could control the corrosion rate of steels exposed to Pb or Pb-Bi. At high …

Comparison Of Thermal Cyclic Oxidation Of The Pvd Ni-Al And Hvof-Mcraly Coatings, J-T Chang, C-H Yeh, J-L He, K-C Chen

Journal of Electrochemistry

A PVD process-cathodic arc plasma ion plating was used to deposit Ni-Al films on Inconel 600 superalloy. The oxidation behaviors of PVD Ni-Al coating and the thermal sprayed CoCrAlY coatings were revealed and compared by performing cyclic thermal oxidation test at 1100 ℃ to evaluate its feasibility. Experimental results showed that the films with different compositions of Ni₆₂Al₃₈, Ni₆₃Al₃₇ and Ni₆₉Al₃₁ could be obtained when using Ni₅₂Al₄₈, Ni₆₀Al₄₀ and Ni₇₀Al₃₀ as targets, respectively. During the cyclic thermal oxidation test, the …

Fabrication Of Scanning Micro Cl- Probe And In Situ Imaging Of Cl- At The Interface Of 2024 Al Aloy/Solution, Yu-Hua Lin, Min-Hua Shao, Rong-Gang Hu, Yan Li, Rong-Gui Du, Chang-Jian Lin

Journal of Electrochemistry

Micro combination Ag/AgCl electrode with a tip measuring tens micron in diameter was fabricated. The probe satisfied in situ imaging of Cl^- distribution at metal surface in chloride solution because of its excellent linearity between potential and Cl- concentration, rapid response, good stability and selectivity. With the aid of the home made Micro Electrode Scanning system and scanning Cl^- probe, the effect of the [Cl^-] at 2024-Al/solution interface on localized corrosion process was investigated. It was demonstated directly that Cl^- ion in solution immigrated toward, then adsorbed preferentially and accumulated at the junction between the …

Synthesis Of Polyunit Vapor Phase Inhibitor And Its Volatile Corrosion Inhibition Performance, Da-Quan Zhang, Li-Xin Gao, Guo-Ding Zhou

Journal of Electrochemistry

A Mannich Base derivative (BMMCH), containing two morpholinum moieties and one cyclohexylamnonium moiety, was synthesized through aminomethy1 reaction. Its configuration was verified by IR and ¹H-NMR. Its volatile rustproofing effect was appraised by volatile rustproofing sieve test and vapor inhabitability test. The result shows that BMMCH has good protection effect for carbon steel. BMMCH has lower volatility compared with dicyclohexylamnonium nitrite (DICHAN) via closed space volatile weight-loss test. The inhibition mechanism was studied by potentiodynamic polarization electrochemistry technique in ASTM simulated atmospheric water. The corrosion potential of carbon steel electrode shifted to a negative direction when BMMCH was joined …

Effect Of Heat Laminating Aggregation Status Of Polymer Lithium-Ion Battery Cathode On Battery Performance, Ming-Gang Jin, Quan-Feng Dong, Ming-Sen Zheng, Li Huang, Hui-Qun Cai, Jin-Qua You, Zu-Geng Lin

Journal of Electrochemistry

Multi-layer heat laminated polymer lithium ion battery was made, the effect of temperature of cathode laminating on battry performance was also investigated. It was discovered that suitable temperature of cathode laminating is critical to battery performance and is a key parameter to manufacture process control of polymer lithium ion battery.

Influence Of Marine Organisms Upon Corrosion Of Steel Piling Systems, Jiunn-Shyong Luo, Cliff Rau, Kuei-Ching Chen

Journal of Electrochemistry

To study the influence of marine organisms upon corrosion of ASTM A36 steel piling sysems, specimens were immersed in both natural and synthetic seawater. Electrochemical techniques such as linear polarization resistance and electrochemical impedance scan(EIS) were applied to evaluate corrosion of the steel. The results indicated that attachment of marine organisms to form fouling layers on the steel surface reduced general corrosion, but localized corrosion occurred underneath marine organisms. An equivalent circuit model was established to simulate attachment of marine organisms upon carbon carbon steel surfaces.

Study On Adsorption Behavior Of Inhibitors On N80 Steel, Ai-Kui Li, Guo-Min Li, Xing-Peng Guo

Journal of Electrochemistry

The deadsorption behavior of four inhibitors on N80 steel with and without carbonate film was investigated by polarization and electrochemical impedance spectroscopy (EIS) techniques. It was found that, for different inhibitors, deadsorption behavior and adsorbability between with and without carbonate film are different. Furthermore, acidic inhibitor and small size molecule inhibitor shows different inhibition behavior.

Discussion On Factors Of Unstable 304 Stainless Steel Stress Corrosion Cracking, Xin-Sheng Zhang, Chun-Chun Xu, Gang Hu

Journal of Electrochemistry

The 304 stainless steels were stretched at low temperatures to get different martensite phase transformation. Ferrmagnetometer was used to measure the martensite phase content. It was found that the dislocation density of 304 stainless sted was increased unavoidably with increase of deformation. Transmission electron microscope (TEM) was used to study the distribution of the dislocation. The influence of microstructure change on SCC of 304 stainless steel was discussed by slow strain rate testing (SSRT) in 42% MgCl₂ boiling solution,metallurgical microscope and scanning electron microscope (SEM).The results showed that martensite phase and dislocation flaw act together on the SCC susceptibility …

The Technique Of Rare-Earth Conversion Coatings On Aluminum Alloy, Jun-Tao Wang, Jian-Hua Wu, Guang-Zhang Chen

Journal of Electrochemistry

The orthogonal design was used to screen the film_forming technique on LY12 aluminum alloy using quadrivalent cerium salt, and the corrosion-resistance performance of the coating was studied. The results revealed that: after LY12 aluminum alloy was treated by cerium salt, its pitting potential shifts to positive direction while the corrosion potential slightly decreases, showing that the alloy becomes less sensitive to pitting corrosion was greatly improved, comparable to that after chromate treatment; in addition, by combining the results of electrochemical measurements with surface analysis, the mechanism of corrosion-resistance on the race-earth conversion coating of the aluminum alloy was also discussed.

The Electroless Plating Ni-Fe-P Alloy And Its Voltammetric Behavior, Sen-Lin Wang, Hui-Huang Wu

Journal of Electrochemistry

Electroless Ni-Fe-P alloy deposition from an alkaline bath, containing sodium hypophosphite as reducer, boric acid as buffer agent and sodium citrate as complexing agent, was investigated. To increase the plating rate and to inprove the bath stability, the deposition parameters were optimized. The effects of process parameters (pH, temperature and mole ratio of [Fe²⁺]/([Ni²⁺]+[Fe²⁺]) on the plating rate and deposit composition were examined and it was found that the presence of ferrous sulfate in the bath has an inhibitory effect on the alloy deposition. As a consequence, the percentage of iron in the electroless …

Synthesis And Electrochemical Properties Of K2Feo4, Ning Zhou, Shi-Hai Ye, Yong-Long Wang, Xue-Ping Gao, Dong-Feng Lin, Zuo-Xiang Zhou, De-Ying Song

Journal of Electrochemistry

The K₂FeO₄ used for new positive electrode materials was prepared. The primary batteries were used in different concentration of electrolyte and different currents. In 9 mol/L KOH , the capacity was the best. The higher the concentration of electrolyte, the lower the electric potential was. When the batteries discharged in 0.4 C , the capacity reached 521.3 mAh/g. By XRD, we gave the reasonable explanations for the discharge products of K₂FeO₄. Possible mechanism of discharge is discussed.

Corrosion Fatigue And Dynamic Strain Aging Of Duplex Stainless Steel In Aqueous Solution, Chuan-Ming Tseng, I-Hsuang Lo, Wen-Ta Tsai

Journal of Electrochemistry

The corrosion fatigue and dynamic strain aging behaviors of 22%Cr duplex stainless steel (DSS) in sodium chloride solutions were investigated. Austenitic 316L SS and ferrtic 430 SS were also used in this study for a comparison. The experimental results showed that no stress corrosion cracking (SCC) occurred in all these SSs tested in 3.5wt% NaCl solution at 80 ℃. However, dynamic strain aging (DSA) occurred in 316L austenitic SS and 22%Cr DSS during slow strain rate testing (SSRT) in this solution.The occurrence of DSA was dependent on solution temperature,strain rate and the presence of austenitic phase. The corrosion rate of …

An Electrochemical Prediction Method For Caustic Scc Of Fe-Cr-Ni Alloy, Chun-Bo Huang, Zhan-Peng Lv, Wu Yang

Journal of Electrochemistry

Stress corrosion cracking (SCC) of Fe-Cr-Ni alloy (alloy 800 M) in hot concentrated caustic solution was investigated by means of tests of C-rings under controlled potentials. The steady dissolution current densities (i_st) of the plate specimens and C-rings polarized potentiostatically were measured. The simplifed steady potentiostatical curves were drawn on the basis of i_st. The ratio R_PD measured from i_st and steady passive current density i p at low potentials (R_PD = i_st/i_p) was designed as a polarization dissolution susceptibility parameter. The parameter R_PD values of both plate …

Electrochemistry And Electrocatalysis Of A Novel Μ-Oxamido Copper(Ⅱ) Binuclear Complex, Gui-Lian Gao, Guo-Bao Li, Qiu-Xia Yang, Xue-Lin Wang

Journal of Electrochemistry

In this paper, the cyclic voltammetric and spectroelectrochemical behaviors of μ-oxamido Copper(Ⅱ) Binuclear Complex (deCu) in PBS were studied. Cyclic voltammograms of this complex in PBS (pH=9) exhibited two reductive peaks (E_pc1 =-0.25 V, E_pc2 = -0.50 V) at hanging mercury drop electrode(HMDE), peaks at -0.50 V and -0.25 V corresponded to the reduction of ligand and copper(Ⅱ) complex, respectively. The spectroelectrochimical experiments showed that there was a new absorption band at 440 nm, and the absorption peaks at 270 nm, 280 nm red shifted to 300 nm, 310 nm under potential of -0.75 V. It was meant …

Severe Corrosivity And Its Eletrochemical Mechanism Of Seawater In Xiamen Sea Area To Al-Mg Alloys, Le-Yun Lin, Yue-Hong Zhao

Journal of Electrochemistry

The surface layer seawater of different sea areas in China exhibit different corrosivity to Al-Mg alloys according to the experiment results of 16 years exposure in seawater. The seawater in Xiamen sea area possesses severe corrosivity while seawater in Qingdao possesses the mildest corrosivity to Al-Mg alloys with better regularity of corrosion behavior. The present paper illustrates by experiment data that the strongest corrosivity of Xiamen seawater to Al-Mg alloys is owing to the low salinity of the seawater and the “electrolyte effect” come from it. The 16 year corrosion data and corrosion morphology of the typical Al-Mg alloys from …

The Mechanism Of Electrocatalytic Reduction Of Oxygen On Manganese Dioxide, Yu-Liang Cao, Han-Xi Yang, Xin-Ping Ai, Li-Fen Xiao

Journal of Electrochemistry

The oxygen electroreduction on the MnO₂ electrode was investigated by analysis of the polarzation properties of oxygen reduciton and its dependence on MnO₂ discharge state, in combination with the characterization of discharge intermediate and the kinetic parameters of the oxygen reduction. Based on the experimental observation and mechanistic analysis, it was suggested that the reduction of oxygen was closely related to the discharge behaviors of MnO₂. When MnO₂ was electrochimically reduced to MnOOH, it was immediately oxidized by oxygen molecules. Thus the oxygen reduction proceeds through continuous oxidation of the discharge product of MnO_{2 …}

Study On The Electrochemical Behavior Of Methy1 Green And Methy1 Green-Cyclodextrin Supramolecule System, Yu-Jing Guo, Jing-Hao Pan, Chun-Hua Guo, Hong-Lian Zheng

Journal of Electrochemistry

Electrochemical behavior of methyl green in different kinds of solution and the supramolecule system of methyl green-cyclodextrin were studied. Inclusion constants of four cyclodextrin with emthyl green were determined by “electric current method”. The order of inclusion ability is HP-β-CD,β-CD,SBE-β-CD and CM-β-CD. The molar ratio of inclusion complexes of methyl green with CDs is 1:2. A possible mechanism was reported for methyl green.

Study Of Electrolyzed Pure Iron And Rrr-H Method, Wei-Min Cao, Ren-He Yin, Hui-Gen Yan, Yi-Bing Zhang, Ying-Chun Dai

Journal of Electrochemistry

The high purity electrolytic iron was made from scrap iron chips. The purity of electrolyzed pure iron was above 99.98% by chemical analysis. The resistivity was measured at 298 K and at 4.2 K under an applied longitudinal-magnetic field of 8000 e. The ratio of resistivity at 298 K to that at 4.2 K, The value of residual resistivity ratio (RRR H) roughly depended on the purity of iron. Pure iron electrolyzed on Ti substrate had very compact texture as evident by SEM.

Why Should Students Do Research?, Bruce R. Branchini

Convocation Addresses

No abstract provided.

Development Of A Systems Engineering Model Of The Chemical Separations Process: Quarterly Progress Report 5/16/03- 8/15/03, Yitung Chen, Randy Clarksean, Darrell Pepper

Separations Campaign (TRP)

Two activities are proposed in this Phase I task: the development of a systems engineering model and the refinement of the Argonne code AMUSE (Argonne Model for Universal Solvent Extraction). The detailed systems engineering model is the start of an integrated approach to the analysis of the materials separations associated with the AAA Program. A second portion of the project is to streamline and improve an integral part of the overall systems model, which is the software package AMUSE. AMUSE analyzes the UREX process and other related solvent extraction processes and defines many of the process streams that are integral …

Development Of A Systems Engineering Model Of The Chemical Separations Process, Yitung Chen, Sean Hsieh, Randy Clarksean, Darrell Pepper

Separations Campaign (TRP)

The AFCI program is developing technology for the transmutation of nuclear waste to address many of the long-term disposal issues. An integral part of this program is the proposed chemical separations scheme.

Nearly all issues related to risks to future generations arising from long-term disposal of such spent nuclear fuel is attributable to about 2% of its content. Such 2% is made up primarily of plutonium, neptunium, americium, and curium (the transuranic elements) and long-lived isotopes of iodine and technetium created as products from the fission process in power reactors. When transuranics are removed from discharged fuel destined for disposal, …

Direct Multielemental Analysis Of Solid Samples Using Laser Ablation Inductively Coupled Plasma Mass Spectometry And Pulsed Radio Frequency Glow Discharge Mass Spectrometry, Joseph Miller

Masters Theses & Specialist Projects

Direct solid sampling is an area of analytical research that has generated a large amount of interest in recent years. Two analysis systems offering fast and nondestructive methods of determining the elemental composition of substances, without requiring complicated sample preparation procedures, are laser ablation inductively coupled plasma mass spectroscopy (LA-ICPMS) and radio frequency glow discharge mass spectroscopy (rf-GDMS). A Cetac LSX-200 laser system coupled to a LECO Renaissance ICPMS was utilized to analyze coal and ash samples prepared by incorporation into a lithium borate matrix to form a disk. In addition, a VG 9000 Glow Discharge Mass Spectrometer (GDMS) with …

Modeling Corrosion In Oxygen Controlled Lbe Systems With Coupling Of Chemical Kinetics And Hydrodynamics - Phase Three, Samir Moujaes, Yitung Chen

Transmutation Sciences Materials (TRP)

The proposed work will combine chemical kinetics and hydrodynamics in target and test-loop lead-bismuth eutectic (LBE) systems to model system corrosion effects. This approach will result in a predicative tool that can be validated with corrosion test data, used to systematically design tests and interpret the results, and provide guidance for optimization in LBE system designs. The task includes two subtasks. The first subtask is to try to develop the necessary predictive tools to be able to predict the levels of oxygen and corrosion products close to the boundary layer through the use of Computational Fluid Dynamics (CFD) modeling. The …

Solubility And Freezing Effects Of Fe2+ And Mg2+ In H2so4 Solutions Representative Of Upper Tropospheric And Lower Stratospheric Sulfate Particles, Matthew E. Wise, Sarah D. Brooks, Rebecca M. Garland, Daniel J. Cziczo, Scot T. Martin, Margaret A. Tolbert

CUP Faculty Research

Chemical elements characteristic of earth minerals and meteorites are present within background tropospheric and stratospheric sulfate aerosol particles. However, it is unknown if these elements are present predominantly as solids, including possible sulfates, carbonates, and oxides, or rather as soluble aqueous metal ions or complexes. Further, it is unclear how these impurities could affect particle freezing. To address these questions, we have determined the total equilibrium metal solubility ([Fe²⁺]_T and [Mg²⁺]_T) in 20–90 wt % sulfuric acid solutions over the temperature range 200–300 K. We have measured solubilities using samples of MgSO_{4 …}

45th Rocky Mountain Conference On Analytical Chemistry

Rocky Mountain Conference on Magnetic Resonance

Final program, abstracts, and information about the 45th annual meeting of the Rocky Mountain Conference on Analytical Chemistry, co-endorsed by the Colorado Section of the American Chemical Society and the Rocky Mountain Section of the Society for Applied Spectroscopy. Held in Denver, Colorado, July 27-31, 2003.