Open Access. Powered by Scholars. Published by Universities.®
Social and Behavioral Sciences Commons™
Open Access. Powered by Scholars. Published by Universities.®
- Discipline
- Institution
Articles 1 - 30 of 61
Full-Text Articles in Social and Behavioral Sciences
Ddasaccident696, Hd-Aid
Ddasaccident696, Hd-Aid
Global CWD Repository
The investigation team concluded that the contributing factor to this accident was carelessness of deminer in terms of started excavation on the top of the detected signal, and poor command and control by acting team leader.
Ddasaccident660, Hd-Aid
Ddasaccident660, Hd-Aid
Global CWD Repository
The primary and secondary causes of this accident are listed as Other because the accident summary lacks enough detail to infer anything useful about the events surrounding the accident.
Ddasaccident607, Hd-Aid
Ddasaccident607, Hd-Aid
Global CWD Repository
The primary cause of this accident is listed as Inadequate training because it seems that the Victim started excavating on top of the mine. He may not have known how to pinpoint the detector reading appropriately, or may not have been instructed in safe excavation techniques. The secondary cause is listed as a Field Control Inadequacy because the investigators found that the field supervisors did not give appropriate information about the task site and did not correct his errors.
Hd R&D Field Evaluation: Rapid Area Preparation Tool (Raptor), U.S. Humanitarian Demining Research And Development
Hd R&D Field Evaluation: Rapid Area Preparation Tool (Raptor), U.S. Humanitarian Demining Research And Development
Global CWD Repository
In October 2007 and May 2008, the U.S. Humanitarian Demining Research and Development Program (HD), located at Ft. Belvoir, VA., undertook the testing of the Rapid Area Preparation Tool (RAPTOR). RAPTOR is the latest of a series of area preparation systems on tractor platforms that HD has developed in the last decade. Systems, including the Severe Duty Tractor and Tools (SDTT) and Mantis, have undergone operational evaluations in Thailand, Nicaragua, and Afghanistan. The RAPTOR was developed by the HD program to handle all area-preparation tasks from vegetation cutting and removal (up to Category 3), to antipersonnel mine rolling, plowing, and …
Ddasaccident770, Hd-Aid
Ddasaccident770, Hd-Aid
Global CWD Repository
On 30 December 2008 deminer de- miner [the Victim] was busy in excavation of a detected signal in his clearance lane, his scraper touched on the top of a mine and caused it to explode.
Ddasaccident634, Hd-Aid
Ddasaccident634, Hd-Aid
Global CWD Repository
The accident occurred because of carelessness of the deminer as he used chisel directly on the detected signal instead of [Demining group] standard excavating tool (scraper). The poor command and control is another contributing factor for this accident as he was not stopped by command group.
Ddasaccident635, Hd-Aid
Ddasaccident635, Hd-Aid
Global CWD Repository
The primary cause of this accident is listed as a Field Control Inadequacy because the Victim was a field supervisor who acted in breach of basic safety requirements by poking a mine with a stick, apparently as a joke. The secondary cause is listed as a Management Control Inadequacy because the demining group’s managers are responsible for the selection and training of appropriately responsible field supervisors.
Ddasaccident619, Hd-Aid
Ddasaccident619, Hd-Aid
Global CWD Repository
The primary cause of this accident is listed as Victim Inattention because the investigators imply that the Victim deliberately walked into the uncleared area. The secondary cause is listed as a Field Control Inadequacy because the field supervisors did nothing to prevent him doing so.
Ddasaccident612, Hd-Aid
Ddasaccident612, Hd-Aid
Global CWD Repository
The primary cause of this accident is listed as Inadequate training because the investigators found that the Victim did not know how to excavate safely. The secondary cause is listed as a Management Control Inadequacy because it is a management responsibility to ensure that all deminers are appropriately trained.
Ddasaccident605, Hd-Aid
Ddasaccident605, Hd-Aid
Global CWD Repository
The primary cause of this accident is listed as a Field Control Inadequacy because the investigators concluded that there was poor command and control. The injury spread, including forehead and body, implies that PPE was not being worn at the time. The secondary cause is listed as Inadequate training because it seems that the deminer either did not know how to pinpoint a detector reading adequately or did not understand the risks of digging directly on top of the place where the detector signalled.
Ddasaccident700, Hd-Aid
Ddasaccident700, Hd-Aid
Global CWD Repository
As it was a difficult task for the clearance, and required extra attention and care of command group and deminers themselves, thus the carelessness of deminer was the main contributing factor to this accident. The consequence of this accident is a slight injury to the finger of deminer which indicates that he was fully dressed with PPE.
Ddasaccident694, Hd-Aid
Ddasaccident694, Hd-Aid
Global CWD Repository
Carelessness of deminer and poor supervision in terms of not conducted QC, caused the accident, and happened.
Ddasaccident691, Hd-Aid
Ddasaccident691, Hd-Aid
Global CWD Repository
The negligence of deminer in terms of not adhering to set procedure for excavation and the failure of command group in order to control the deminer and stop him from wrong practice is the contributing factors for this accident
Ddasaccident692, Hd-Aid
Ddasaccident692, Hd-Aid
Global CWD Repository
The investigation team concluded that the contributing factor to this accident was Carelessness of deminer in terms of use of bayonet by left hand which was in contrary to his habit.
Ddasaccident687, Hd-Aid
Ddasaccident687, Hd-Aid
Global CWD Repository
The accident occurred because of the ignorance of standard operating procedures and appropriated method of demolitions and destruction of ammunitions.
Ddasaccident673, Hd-Aid
Ddasaccident673, Hd-Aid
Global CWD Repository
Refering to other accidents with this demining group at this period, the Victim may have been using a “pick”. Whatever tool the Victim was using, it is likely that he did not pinpoint the detector signal correctly and so began excavating on top of the mine.
Ddasaccident654, Hd-Aid
Ddasaccident654, Hd-Aid
Global CWD Repository
It is the BOI conclusion that the deminer, [the Victim], was not clearly marking his lane progressively throughout the course of the day. He has moved back into his clearance lane during a break period, without wearing his PPE and helmet, to place a marking stone. He has not wanted to get too close to the unsafe area and has leant forward and thrown the marking stone forward to mark the lane. This stone has landed on a mine with the detonation causing the stones to be thrown up from the blast and inflicting the injuries that have resulted in …
Ddasaccident636, Hd-Aid
Ddasaccident636, Hd-Aid
Global CWD Repository
The accident occurred because of carelessness of the deminer as he used chisel directly on the detected signal instead of [Demining group] standard excavating tool (scraper). The poor command and control is another contributing factor for this accident as he was not stopped by command group.
Ddasaccident791, Hd-Aid
Ddasaccident791, Hd-Aid
Global CWD Repository
Task # 824 was one of the tasks surveyed by MCPA and then cleared by [Demining group] in period of around 10 months. The clearance operations started there on 12th December 2005 and completed on 17th November 2006. After completion of clearance operations and handing over of this task to local population, on 3rd of October 2008 a civilian mine accident happened to a 13 years old boy walking in the area busy in kite playing.
Ddasaccident674, Hd-Aid
Ddasaccident674, Hd-Aid
Global CWD Repository
The primary cause of this accident is listed as a Field Control Inadequacy because the investigators determined that poor command and control was a cause. The secondary cause is listed as Other because there is too little detail in the summary to be able to assess what occurred.
Ddasaccident656, Hd-Aid
Ddasaccident656, Hd-Aid
Global CWD Repository
It is unusual for a severe foot injury to occur during excavation. The Victim must have been standing or squatting and, despite mention of a “trowel”, he may have been using the ubiquitous “pick”. The Inadequate equipment listed under Notes refers to the use of inappropriate tools, as identified by the investigators. If he was using a trowel, it is likely that he did not pinpoint the detector signal correctly and so began excavating on top of the mine, as has been reported with several other accidents in this theatre at this time.
Ddasaccident784, Hd-Aid
Ddasaccident784, Hd-Aid
Global CWD Repository
The BOI team believes this detonation may have occurred as a result of the deminer having leant forward from a safe point and thrown a marking stone down onto the ground. His aim may have been off and he may have inadvertently thrown the stone onto a mine that had not previously been found in the lane. The mine has detonated, propelling the marking stone and other stones back at him with the marking stone striking him in the chest and the remaining stones having caused the injuries around the forehead and eyes. Unfortunately these injuries have resulted in his …
Ddasaccident652, Hd-Aid
Ddasaccident652, Hd-Aid
Global CWD Repository
The primary cause of this accident is listed as a Field Control Inadequacy because the investigators determined that the supervisor allowed the machine to work in bad weather and did not correct the driver’s error. The secondary cause is listed as Victim Inattention because it seems that the driver did not intend to reverse out of the cleared area. There may have been inadequate area marking in place.
Ddasaccident651, Hd-Aid
Ddasaccident651, Hd-Aid
Global CWD Repository
It is the conclusion of the investigation team that the carelessness of involved team leader cased the accident. As he intentionally picked up the device and tampered it without taking precautionary measures in to consideration
Ddasaccident704, Hd-Aid
Ddasaccident704, Hd-Aid
Global CWD Repository
It is the conclusion of the investigation team that the carelessness of involved deminer, use of wrong tool for excavation and poor supervision caused the accident happened.
Ddasaccident697, Hd-Aid
Ddasaccident697, Hd-Aid
Global CWD Repository
It is the conclusion of investigation team that the carelessness of involved ATL, deviation from AMAS and [Demining group]’s SOP and use of dark visor during disarming operation on the fuse are the contributing factors to this accident. Additionally the rule of supervision is vital in preventing such accidents.
Ddasaccident688, Hd-Aid
Ddasaccident688, Hd-Aid
Global CWD Repository
It is the conclusion of the investigation team that the carelessness of involved deminer, poor command and control and deviation from SOPs caused the accident happened.
Ddasaccident780, Hd-Aid
Ddasaccident780, Hd-Aid
Global CWD Repository
On 22 August 2008 while de-miner [the Victim] was working in his clearance lane from up downward direction. He used scraper as a standard tool for excavation, but the area was hard and bushy. The de-miner hit the mine directly on its top during excavation and caused the explosion. However the deminer had worn his PPE but has got some injuries on his finger and arm of his right hand.
Ddasaccident665, Hd-Aid
Ddasaccident665, Hd-Aid
Global CWD Repository
On 17 August 2010 [the Victim] the deminer was working in his clearance lane excavating a detected signal, his excavation tool touched a mine and caused it to explode. According to the investigation report the signal was not pinpointed correctly and the deminer has used his bayonet directly on the top of anti-personnel mine, so the accident happened. Unfortunately the victim deminer was not fully dressed with PPE, so he got severe injuries on his eyes, whole face and finger of his left hand.
Ddasaccident616, Hd-Aid
Ddasaccident616, Hd-Aid
Global CWD Repository
The primary cause of this accident is listed as a Field Control inadequacy because the investigators found that there was poor supervision at the time of the accident. The secondary cause is listed as Other because there is not enough detail in the summary to determine what the deminer was doing, and what tool he was using.