Open Access. Powered by Scholars. Published by Universities.®
Social and Behavioral Sciences Commons™
Open Access. Powered by Scholars. Published by Universities.®
Articles 1 - 30 of 124
Full-Text Articles in Social and Behavioral Sciences
Nonlinear Analysis Of Circular High Strength Concrete-Filled Stainless Steel Tubular Slender Beam-Columns, Vipulkumar I. Patel, Qing Quan Liang, Muhammad N. S Hadi
Nonlinear Analysis Of Circular High Strength Concrete-Filled Stainless Steel Tubular Slender Beam-Columns, Vipulkumar I. Patel, Qing Quan Liang, Muhammad N. S Hadi
Faculty of Engineering and Information Sciences - Papers: Part A
Concrete-filled stainless steel tubular (CFSST) slender columns are increasingly used in composite structures owing to their distinguished features, such as aesthetic appearance, high corrosion resistance, high durability and ease of maintenance. Currently, however, there is a lack of an accurate and efficient numerical model that can be utilized to determine the performance of circular CFSST slender columns. This paper describes a nonlinear fiber-based model proposed for computing the deflection and axial load-moment strength interaction responses of eccentrically loaded circular high-strength CFSST slender columns. The fiber-based model incorporates the accurate three-stage stress-strain relations of stainless steels, accounting for different strain hardening …
Dynamic Exergy Analysis For The Thermal Storage Optimization Of The Building Envelope, Valentina Bonetti, Georgios Kokogiannakis
Dynamic Exergy Analysis For The Thermal Storage Optimization Of The Building Envelope, Valentina Bonetti, Georgios Kokogiannakis
Faculty of Engineering and Information Sciences - Papers: Part A
As a measure of energy "quality", exergy is meaningful for comparing the potential for thermal storage. Systems containing the same amount of energy could have considerably different capabilities in matching a demand profile, and exergy measures this difference. Exergy stored in the envelope of buildings is central in sustainability because the environment could be an unlimited source of energy if its interaction with the envelope is optimised for maintaining the indoor conditions within comfort ranges. Since the occurring phenomena are highly fluctuating, a dynamic exergy analysis is required; however, dynamic exergy modelling is complex and has not hitherto been implemented …
Nonlinear Analysis Of Biaxially Loaded Rectangular Concrete-Filled Stainless Steel Tubular Slender Beam-Columns, Vipulkumar I. Patel, Qing Quan Liang, Muhammad N. S Hadi
Nonlinear Analysis Of Biaxially Loaded Rectangular Concrete-Filled Stainless Steel Tubular Slender Beam-Columns, Vipulkumar I. Patel, Qing Quan Liang, Muhammad N. S Hadi
Faculty of Engineering and Information Sciences - Papers: Part A
Rectangular concrete-filled stainless steel tubular (CFSST) beam-columns utilized as supporting members for building frames may experience axial compression and biaxial moments. A numerical simulation considering the local buckling effects for thin-walled rectangular CFSST slender beam-columns has not been performed. This paper reports a stability modeling on the structural characteristics of rectangular CFSST slender beam-columns accounting for different strain-hardening of stainless steel under tension and compression. The influences of local buckling are considered in the simulation utilizing the existing effective width formulations. The developed numerical model simulates the strength interaction and load-deflection behavior of CFSST slender beam-columns. Comparisons of computed results …
Analysis Of Micro Flexible Rolling With Consideration Of Material Heterogeneity, Feijun Qu, Zhengyi Jiang, Haina Lu
Analysis Of Micro Flexible Rolling With Consideration Of Material Heterogeneity, Feijun Qu, Zhengyi Jiang, Haina Lu
Faculty of Engineering and Information Sciences - Papers: Part A
This paper establishes a finite element model to numerically study the springback in thickness direction during micro flexible rolling process, in which 3D Voronoi tessellation has been applied to describe grain boundary and generation process of grain in the workpiece. To reflect material heterogeneity, nine kinds of mechanical properties defined by nine types of heterogeneity coefficients are selected and assigned to Voronoi polyhedrons as per the statistical distribution of hardness of grains identified by micro hardness testing. Initial workpiece thicknesses of 100, 250 and 500 μm with reduction changing from 20% to 50% are respectively considered in the numerical simulation …
Analysis Of Laminated Crack Defect In The Upsetting Process Of Heavy Disk-Shaped Forgings, Minting Wang, Dongying Li, Fan Wang, Xinliang Zang, Xuetong Li, Hong Xiao, Fengshan Du, F C. Zhang, Zhengyi Jiang
Analysis Of Laminated Crack Defect In The Upsetting Process Of Heavy Disk-Shaped Forgings, Minting Wang, Dongying Li, Fan Wang, Xinliang Zang, Xuetong Li, Hong Xiao, Fengshan Du, F C. Zhang, Zhengyi Jiang
Faculty of Engineering and Information Sciences - Papers: Part A
Using nonlinear finite element method, a thermo-mechanical coupled simulation model for the formation mechanism of the laminated crack defect has been established in the upsetting of heavy disk-shaped forgings. Through numerical simulation, the distributions of stress, equivalent strain and strain rate were analysed. Meanwhile the distribution diagram of stress state evolution was obtained, and the uncoordinated deformation, under tri-lateral compression, is determined as the main reason leading to laminated crack defect. To reveal the characteristics of the uncoordinated deformation, the variations of each variable and its gradient in numerical simulation were presented, and a combined prediction model of laminated crack …
Nonlinear Dynamical Behavior Of Axially Accelerating Beams: Three-Dimensional Analysis, Mergen H. Ghayesh, Hamed Farokhi
Nonlinear Dynamical Behavior Of Axially Accelerating Beams: Three-Dimensional Analysis, Mergen H. Ghayesh, Hamed Farokhi
Faculty of Engineering and Information Sciences - Papers: Part A
The three-dimensional (3D) nonlinear dynamics of an axially accelerating beam is examined numerically taking into account all of the longitudinal, transverse, and lateral displacements and inertia. Hamilton's principle is employed in order to derive the nonlinear partial differential equations governing the longitudinal, transverse, and lateral motions. These equations are transformed into a set of nonlinear ordinary differential equations by means of the Galerkin discretization technique. The nonlinear global dynamics of the system is then examined by time-integrating the discretized equations of motion. The results are presented in the form of bifurcation diagrams of Poincare maps, time histories, phase-plane portraits, Poincare …
Analysis Of Bacterial Diversity In Two Oil Blocks From Two Low-Permeability Reservoirs With High Salinities, Meng Xiao, Shan Shan Sun, Zhong Zhi Zhang, Junming Wang, Long Wei Qiu, Hua Yang Sun, Zhaozheng Song, Beiyu Zhang, De Li Gao, Guangqing Zhang, Wei Min Wu
Analysis Of Bacterial Diversity In Two Oil Blocks From Two Low-Permeability Reservoirs With High Salinities, Meng Xiao, Shan Shan Sun, Zhong Zhi Zhang, Junming Wang, Long Wei Qiu, Hua Yang Sun, Zhaozheng Song, Beiyu Zhang, De Li Gao, Guangqing Zhang, Wei Min Wu
Faculty of Engineering and Information Sciences - Papers: Part A
The community diversities of two oil reservoirs with low permeability of 1.81 x 10 '3 and 2.29 x 10 '3 1/4m 2 in Changqing, China, were investigated using a high throughput sequencing technique to analyze the influence of biostimulation with a nutrient activator on the bacterial communities. These two blocks differed significantly in salinity (average 17,500 vs 40,900 mg/L). A core simulation test was used to evaluate the effectiveness of indigenous microbial-enhanced oil recovery (MEOR). The results indicated that in the two high salinity oil reservoirs, one reservoir having relatively lower salinity level and a narrow salinity range had higher …
Energy Analysis Of Net Zero Energy Buildings: A Case Study, Joel Anderson, Duane A. Robinson, Zhenjun Ma
Energy Analysis Of Net Zero Energy Buildings: A Case Study, Joel Anderson, Duane A. Robinson, Zhenjun Ma
Faculty of Engineering and Information Sciences - Papers: Part A
The building sector is a significant contributor to global energy usage and environmental emissions. Advanced building design, optimal selection and sizing of building components, and energy efficient operation are among the key ways of significantly reducing overall building energy demand. Achieving reduction in energy demand is a key directive of the net zero energy building concept. Building designs dedicated to meeting net zero energy building requirements are becoming more commonplace as a path towards reducing the overall emissions from the built environment. This work analyses the energy demand of a net zero energy office building and compares it with a …
Comparison Of Resting Energy Expenditure Between Cancer Subjects And Healthy Controls: A Meta-Analysis, Thi Yen Vi Nguyen, Marijka Batterham, Cheree Edwards
Comparison Of Resting Energy Expenditure Between Cancer Subjects And Healthy Controls: A Meta-Analysis, Thi Yen Vi Nguyen, Marijka Batterham, Cheree Edwards
Faculty of Engineering and Information Sciences - Papers: Part A
There is conflicting evidence surrounding the extent of changes in resting energy expenditure (REE) in cancer. This meta-analysis aimed to establish the mean difference in REE, as kilojoules per kilogram fat-free mass, among cancer patients when compared to healthy control subjects. The secondary aim was to determine differences among different cancer types. PubMed, Cochrane Library, Medline, Science Direct, Scopus, Web of Science, Wiley Online Library, and ProQuest Central were searched from the earliest records until March 2014. Studies were included if measured REE was reported as kilojoules or kilocalories per kilogram fat-free mass (FFM) in adult subjects with cancer. Twenty-seven …
Cloud Computing Adoption Determinants: An Analysis Of Australian Smes, Salim Al Isma'ili, Mengxiang Li, Jun Shen, Qiang He
Cloud Computing Adoption Determinants: An Analysis Of Australian Smes, Salim Al Isma'ili, Mengxiang Li, Jun Shen, Qiang He
Faculty of Engineering and Information Sciences - Papers: Part A
In Australia, there is an emerging tendency among SMEs towards the adoption of cloud computing. However, there are limited studies investigating the factors that influence cloud computing adoption within Australian SMEs. To fill the research vacuum, we developed a research model based on the diffusion of innovation theory (DOI), the technology-organisation-environment (TOE) framework, and our prior exploratory study to investigate the determinants that influence the adoption of cloud computing. An organizational-level survey was conducted across Australia to collect data from technology decision makers in SMEs. Data collected from 203 firms are used to test the related hypotheses. This study contributes …
Developing An Optimum Maintenance Policy By Life Cycle Cost Analysis - A Case Study, Khaled O. El-Akruti, Tieling Zhang, Richard Dwight
Developing An Optimum Maintenance Policy By Life Cycle Cost Analysis - A Case Study, Khaled O. El-Akruti, Tieling Zhang, Richard Dwight
Faculty of Engineering and Information Sciences - Papers: Part A
This paper focuses on developing maintenance policies for critical assets to improve the production performance based on life cycle cost (LCC) analysis. A general approach is adopted for conducting the LCC analysis. The investigation is based on a case study to demonstrate how an optimum maintenance policy is determined. The relevant LCC structure in the case study is defined for the decision process which involves determination of the optimum life, repair limit and selection of materials, and trade-off between repair and replacement. The LCC analysis is based on statistical data modelling which facilitates decision-making on the optimal replacement of an …
Performance Analysis Of A Magnetorheological Damper With Energy Harvesting Ability, Guoliang Hu, Yun Lu, Shuaishuai Sun, Weihua Li
Performance Analysis Of A Magnetorheological Damper With Energy Harvesting Ability, Guoliang Hu, Yun Lu, Shuaishuai Sun, Weihua Li
Faculty of Engineering and Information Sciences - Papers: Part A
A magnetorheological (MR) damper with energy harvesting ability was proposed based on electromagnetic induction (EMI) principle. The energy harvesting part was composed of a permanent magnet array and inducing coils which move vertically. This device could act as a linear power generator when the external excitation was applied, and the kinetic energy could be converted into electrical energy due to the relative linear motion between the magnets array and the inducing coils. Finite element models of both the MR damper part and the linear power generator part were built up separately to address the magnetic flux distributions, the magnetic flux …
Flexible Analysis Of Digital Pcr Experiments Using Generalized Linear Mixed Models, Matthijs Vynck, J Vandesompele, Nele Nijs, Björn Menten, Ariane De Ganck, Olivier Thas
Flexible Analysis Of Digital Pcr Experiments Using Generalized Linear Mixed Models, Matthijs Vynck, J Vandesompele, Nele Nijs, Björn Menten, Ariane De Ganck, Olivier Thas
Faculty of Engineering and Information Sciences - Papers: Part A
The use of digital PCR for quantification of nucleic acids is rapidly growing. A major drawback remains the lack of flexible data analysis tools. Published analysis approaches are either tailored to specific problem settings or fail to take into account sources of variability. We propose the generalized linear mixed models framework as a flexible tool for analyzing a wide range of experiments. We also introduce a method for estimating reference gene stability to improve accuracy and precision of copy number and relative expression estimates. We demonstrate the usefulness of the methodology on a complex experimental setup.
A Traffic Monitoring System For A Mixed Traffic Flow Via Road Estimation And Analysis, Nguyen Viet Hung, Le Chung Tran, Nguyen Hoang Dung, Thang Manh Hoang, Nguyen Tien Dzung
A Traffic Monitoring System For A Mixed Traffic Flow Via Road Estimation And Analysis, Nguyen Viet Hung, Le Chung Tran, Nguyen Hoang Dung, Thang Manh Hoang, Nguyen Tien Dzung
Faculty of Engineering and Information Sciences - Papers: Part A
A Traffic Monitoring System (TMS) is the most important element in the Intelligent Transportation Systems (ITS), especially in a developing country like Vietnam with a mixed traffic flow of vehicles including motocycles and cars. A traffic flow varies in different daytime, therefore the adoption of the TMS for an adaptive control of the traffic light timing is very essential. The proposed TMS system uses one CCD camera mounted to view from the rear of moving vehicles appearing in a distance from a viewed span of the camera to the stopline of the cross-roads, which is denoted by L and statistically …
Comprehensive Performance Analysis Of Fully Cooperative Communication In Wbans, Le Chung Tran, Alfred Mertins, Xiaojing Huang, Farzad Safaei
Comprehensive Performance Analysis Of Fully Cooperative Communication In Wbans, Le Chung Tran, Alfred Mertins, Xiaojing Huang, Farzad Safaei
Faculty of Engineering and Information Sciences - Papers: Part A
While relay-based cooperative networks (widely known in the literature as cooperative communication), where relays only forward signals from the sources to the destination, have been extensively researched, fully cooperative systems have not been thoroughly examined. Unlike relay networks, in a fully cooperative network, each node acts as both a source node sending its own data and a relay forwarding its partner's data to the destination. Mutual cooperation between neighboring nodes is believed to improve the overall system error performance, especially when space-time codes are incorporated. However, a comprehensive performance analysis of space-time-coded fully cooperative communication from all three perspectives, namel,y …
Finite Element Method Analysis Of Surface Roughness Transfer In Micro Flexible Rolling, Feijun Qu, Haibo Xie, Zhengyi Jiang
Finite Element Method Analysis Of Surface Roughness Transfer In Micro Flexible Rolling, Feijun Qu, Haibo Xie, Zhengyi Jiang
Faculty of Engineering and Information Sciences - Papers: Part A
Micro flexible rolling aims to fabricate submillimeter thick strips with varying thickness profile, where the surface quality of products is mainly determined by initial workpiece surface roughness and subsequent surface asperity flattening process, which is affected by process parameters during rolling. This paper shows a 3D finite element model for flexible rolling of a 250 μm thick workpiece with reduction of 20 to 50%, and rolling phase with thinner thickness indicates a better ability to decrease the surface roughness. Four types of initial workpiece surface roughness are studied in the simulation, and the influences of process parameters, such as friction …
Lubrication Characterisation Analysis Of Stainless Steel Foil During Micro Rolling, Haibo Xie, Kenichi Manabe, Tsuyoshi Furushima, Kazuo Tada, Zhengyi Jiang
Lubrication Characterisation Analysis Of Stainless Steel Foil During Micro Rolling, Haibo Xie, Kenichi Manabe, Tsuyoshi Furushima, Kazuo Tada, Zhengyi Jiang
Faculty of Engineering and Information Sciences - Papers: Part A
Physical parameters, such as microscopic and roughness, play important roles in microforming process due to an increasing ratio of surface to volume of the deformed material. The study on lubrication characterisation in microforming is getting more attractive to researchers because traditional models are not reliable in this scaled down process. In this study, the micro rolling deformation characterisation has been investigated on SUS 304 stainless steel considering lubricant effect and feature size effect. The foil thickness plays an important role in the tribological features of micro rolling. The evolutions of both oil film thickness and foil surface are analysed accordingly. …
A Rapid And Reliable Technique For N-Nitrosodimethylamine Analysis In Reclaimed Water By Hplc-Photochemical Reaction-Chemiluminescence, Takahiro Fujioka, Haruka Takeuchi, Hiroaki Tanaka, Long D. Nghiem, Kenneth P. Ishida, Hitoshi Kodamatani
A Rapid And Reliable Technique For N-Nitrosodimethylamine Analysis In Reclaimed Water By Hplc-Photochemical Reaction-Chemiluminescence, Takahiro Fujioka, Haruka Takeuchi, Hiroaki Tanaka, Long D. Nghiem, Kenneth P. Ishida, Hitoshi Kodamatani
Faculty of Engineering and Information Sciences - Papers: Part A
A fast and reliable analytical technique was evaluated and validated for determination of N-nitrosodimethylamine (NDMA) formation and rejection by reverse osmosis (RO) membranes in potable water reuse applications. The analytical instrument used in this study is high-performance liquid chromatography (HPLC), photochemical reaction (PR) and chemiluminescence (CL) e namely HPLC-PR-CL. Results reported here show that HPLC-PR-CL can be used to measure NDMA with a similar level of accuracy compared to conventional and more time-consuming techniques using gas chromatography and tandem mass spectrometry detection in combination with solid phase extraction. Among key residual chemicals (i.e. monochloramine, hydrogen peroxide and hypochlorite) in reclaimed …
A Sensor Fault Detection Strategy For Air Handling Units Using Cluster Analysis, Rui Yan, Zhenjun Ma, Georgios Kokogiannakis, Yang Zhao
A Sensor Fault Detection Strategy For Air Handling Units Using Cluster Analysis, Rui Yan, Zhenjun Ma, Georgios Kokogiannakis, Yang Zhao
Faculty of Engineering and Information Sciences - Papers: Part A
Sensors are an essential component in the control systems of air handling units (AHUs). A biased sensor reading could result in inappropriate control and thereby increased energy consumption or unsatisfied indoor thermal comfort. This paper presents an unsupervised learning based strategy using cluster analysis for AHU sensor fault detection. The historical data recorded from sensors is first pre-processed to reduce the dimensions using principal component analysis (PCA). The clustering algorithmOrdering Points to Identify the Clustering Structure (OPTICS) is then employed to identify the spatial separated data groups (i.e. clusters),which possibly indicate the occurrence of sensor faults. The data points in …
Cloud Computing Adoption Decision Modelling For Smes: A Conjoint Analysis, Salim Al Isma'ili, Mengxiang Li, Jun Shen, Qiang He
Cloud Computing Adoption Decision Modelling For Smes: A Conjoint Analysis, Salim Al Isma'ili, Mengxiang Li, Jun Shen, Qiang He
Faculty of Engineering and Information Sciences - Papers: Part A
Cloud computing is an emerging technology that promises competitive advantages, cost savings, enhanced business processes and services, and various other benefits to enterprises. Despite the rapid technological advancement, the adoption of cloud computing is still growing slowly among small and mediumsized enterprises (SMEs). This paper presents a model to support the decisionmaking process, using a multi-criteria decision method PAPRIKA for the socio-technical aspects influencing SMEs cloud adoption decision. Due to the multifaceted nature of the cloud computing adoption process, the evaluation of various cloud services and deployment models have become a major challenge. This paper presents a systematic approach to …
Vulnerability Analysis Of Hydrological Infrastructure To Flooding In Coastal Cities - A Graph Theory Approach, Robert Ighodaro Ogie, Tomas Holderness, Sarah Dunn, Etienne Turpin
Vulnerability Analysis Of Hydrological Infrastructure To Flooding In Coastal Cities - A Graph Theory Approach, Robert Ighodaro Ogie, Tomas Holderness, Sarah Dunn, Etienne Turpin
Faculty of Engineering and Information Sciences - Papers: Part A
Hydrological infrastructure such as pumps and floodgates are invaluable assets for mitigating flooding in coastal cities. These infrastructure components are often vulnerable to damage or failure due to the impact of flood waters, thus exacerbating the flood hazards and causing significant loss of life and destruction to property worth billions of dollars. Hence, there is a growing need worldwide to enhance the understanding of flood vulnerability and to develop key metrics for assessing it. This study proposes an approach for measuring the vulnerability of hydrological infrastructure to flood damage in coastal cities. In this approach, a hydrological infrastructure flood vulnerability …
Kinematical Limit Analysis For A Slope Reinforced With One Row Of Stabilizing Piles, Shiguo Xiao, Hong He, Jinxiu Zeng
Kinematical Limit Analysis For A Slope Reinforced With One Row Of Stabilizing Piles, Shiguo Xiao, Hong He, Jinxiu Zeng
Faculty of Engineering and Information Sciences - Papers: Part A
Stabilizing piles are commonly used to improve slope stability. The load that a pile should sustain and the associated slip surface under a prescribed factor of safety are two critical design parameters in practice. Based on the kinematically admissible failure mechanism, a limit analysis approach is introduced, which considers two potential slip surfaces that individually lie in the upslope and downslope of the piles. The explicit formulas for the upslope thrust force and downslope resistance on a pile are derived, which enables the calculation of the maximum load on a pile and the corresponding critical slip surfaces using a computer …
Analysis On The Transient Of A Self-Mixing Interferometry Sensing System, Yuanlong Fan, Bin Liu, Yanguang Yu, Jiangtao Xi, Qinghua Guo, Jun Tong
Analysis On The Transient Of A Self-Mixing Interferometry Sensing System, Yuanlong Fan, Bin Liu, Yanguang Yu, Jiangtao Xi, Qinghua Guo, Jun Tong
Faculty of Engineering and Information Sciences - Papers: Part A
The transient of a self-mixing interferometry (SMI) sensing system is investigated in this paper by solving the well known Lang and Kobayashi (LK) equations. Specifically, the influence of two important system parameters, i.e., the feedback level factor and the linewidth enhancement factor, on the transient is discussed, showing that the decay time and the oscillation period of the transient respectively increases and decreases with the increase of the feedback level factor, and both increase with the increase of linewidth enhancement factor. The results presented in this paper are useful for designing a stable SMI system.
Power Generation Analysis Of Powerwindow, A Linear Wind Generator, Using Computational Fluid Dynamic Simulations, Seyed A. Jafari, Farzad Safaei, Buyung Kosasih, K C. Kwok
Power Generation Analysis Of Powerwindow, A Linear Wind Generator, Using Computational Fluid Dynamic Simulations, Seyed A. Jafari, Farzad Safaei, Buyung Kosasih, K C. Kwok
Faculty of Engineering and Information Sciences - Papers: Part A
A new linear wind generator (LWG), named PowerWindow, is introduced. The modular and scalable LWG is capable of generating power in low wind velocity condition, and hence can be an effective and safe power generator in built environments. The aerodynamic mechanism of the LWG power generation is elucidated using computational fluid dynamic (CFD) simulations, and the results are validated against the experimental data obtained from the prototype wind tunnel tests. The simulations provide important insights into the flow field in and around LWG particularly over the front and rear blades and how each one contributes to the power generation. This …
Towards Knowledge Sharing In Disaster Management: An Agent Oriented Knowledge Analysis Framework, Dedi Iskandar Inan, Ghassan Beydoun, Simon Opper
Towards Knowledge Sharing In Disaster Management: An Agent Oriented Knowledge Analysis Framework, Dedi Iskandar Inan, Ghassan Beydoun, Simon Opper
Faculty of Engineering and Information Sciences - Papers: Part A
Disaster Management (DM) is a complex set of interrelated activities. The activities are often knowledge intensive and time sensitive. Sharing the required knowledge timely is critical for DM. In developed countries, for recurring disasters (e.g. floods), there are dedicated document repositories of Disaster Management Plans (DMP) that can be accessed as needs arise. However, accessing the appropriate plan in a timely manner and sharing activities between plans often requires domain knowledge and intimate knowledge of the plans in the first place. In this paper, we introduce an agent-based knowledge analysis method to convert DMPs into a collection of knowledge units …
A New Bio-Cryptosystem-Oriented Security Analysis Framework And Implementation Of Multibiometric Cryptosystems Based On Decision Level Fusion, Cai Li, Jiankun Hu, Josef Pieprzyk, Willy Susilo
A New Bio-Cryptosystem-Oriented Security Analysis Framework And Implementation Of Multibiometric Cryptosystems Based On Decision Level Fusion, Cai Li, Jiankun Hu, Josef Pieprzyk, Willy Susilo
Faculty of Engineering and Information Sciences - Papers: Part A
Biometric cryptosystems provide an innovative solution for cryptographic key generation, encryption as well as biometric template protection. Besides high authentication accuracy, a good biometric cryptosystem is expected to protect biometric templates effectively, which requires that helper data does not reveal significant information about the templates. Previous works predominantly follow an appropriate entropy definition to measure the security of biometric cryptosystems. In this paper, we point out limitations of entropy-based security analysis and propose a new security analysis framework that combines information-theoretic approach with computational security. In addition, we construct a fingerprint-based multibiometric cryptosystem using decision level fusion. Hash functions are …
Interface Analysis And Hot Deformation Behaviour Of A Novel Laminated Composite With High-Cr Cast Iron And Low Carbon Steel Prepared By Hot Compression Bonding, Zhengyi Jiang, Xingjian Gao, Sheng-Li Li, Hong Mei Zhang, Dengfu Chen, Jian Zhong Xu
Interface Analysis And Hot Deformation Behaviour Of A Novel Laminated Composite With High-Cr Cast Iron And Low Carbon Steel Prepared By Hot Compression Bonding, Zhengyi Jiang, Xingjian Gao, Sheng-Li Li, Hong Mei Zhang, Dengfu Chen, Jian Zhong Xu
Faculty of Engineering and Information Sciences - Papers: Part A
A hot compression bonding process was developed to prepare a novel laminated composite consisting of high-Cr cast iron (HCCI) as the inner layer and low carbon steel (LCS) as the outer layers on a Gleeble 3500 thermomechanical simulator at a temperature of 950 °C and a strain rate of 0.001 S-1. Interfacial bond quality and hot deformation behaviour of the laminate were studied by microstructural characterisation and mechanical tests. Experimental results show that the metallurgical bond between the constituent metals was achieved under the proposed bonding conditions without discernible defects and the formation of interlayer or intermetallic layer …
Analysis Of Thin Strip Profile By Work Roll Crossing And Shifting In Asymmetrical Cold Rolling, Abdulrahman Aljabri, Zhengyi Jiang, Dongbin Wei
Analysis Of Thin Strip Profile By Work Roll Crossing And Shifting In Asymmetrical Cold Rolling, Abdulrahman Aljabri, Zhengyi Jiang, Dongbin Wei
Faculty of Engineering and Information Sciences - Papers: Part A
In order to analyze the effects of cold rolling parameters such as the crossing angle and axial shifting value of work rolls on the strip profile, extensive tests were carried out on a 4-high rolling mill equipped with a work roll crossing and shifting system. The results show that the strip profile is nearly flat under asymmetrical rolling. The rolling force was also analyzed in detail by changing the crossing angle and axial shifting value of work rolls.
Using Rasch Analysis To Explore What Students Learn About Probability Concept, Zamalia Mahmud, Anne L. Porter
Using Rasch Analysis To Explore What Students Learn About Probability Concept, Zamalia Mahmud, Anne L. Porter
Faculty of Engineering and Information Sciences - Papers: Part A
Students’ understanding of probability concepts have been investigated from various different perspectives. This study was set out to investigate perceived understanding of probability concepts of forty-four students from the STAT131 Understanding Uncertainty and Variation course at the University of Wollongong, NSW. Rasch measurement which is based on a probabilistic model was used to identify concepts that students find easy, moderate and difficult to understand. Data were captured from the e-learning Moodle platform where students provided their responses through an on-line quiz. As illustrated in the Rasch map, 96% of the students could understand about sample space, simple events, mutually exclusive …
Analysis Of A Chemostat Model With Variable Yield Coefficient And Substrate Inhibition: Contois Growth Kinetics, Rubayyi Turki Alqahtani, Mark I. Nelson, Annette L. Worthy
Analysis Of A Chemostat Model With Variable Yield Coefficient And Substrate Inhibition: Contois Growth Kinetics, Rubayyi Turki Alqahtani, Mark I. Nelson, Annette L. Worthy
Faculty of Engineering and Information Sciences - Papers: Part A
2015, Copyright Taylor & Francis Group, LLC. We analyze the steady-state operation of a generalized reactor model that encompasses a continuous flow bioreactor and an idealized continuous flow membrane reactor as limiting cases. The biochemical reaction kinetics is governed by a Contois growth model subject to noncompetitive substrate inhibition with a variable substrate yield coefficient. The steady-state performance of the reactor is predicted and stability of the steady-state solutions as a function of dimensionless residence time reported. Our results identified two cases of practical interest. The first feature corresponds to the case where solutions to both no-washout and washout conditions …