Open Access. Powered by Scholars. Published by Universities.®
Social and Behavioral Sciences Commons™
Open Access. Powered by Scholars. Published by Universities.®
Articles 1 - 30 of 52
Full-Text Articles in Social and Behavioral Sciences
Ddasaccident661, Hd-Aid
Ddasaccident661, Hd-Aid
Global CWD Repository
At 11:30 hrs on 15th Dec 2009, [the Victim] the Team Leader of the EOD -01 was working as a deminer and trying to identify the actual mined area. While he was excavating on a signal by a pick, he hit the mine and it caused to the accident. As [the Victim] was not well prepared and fully dressed with PPE, he has got severe injures to face, eyes and forehead.
Ddasaccident765, Hd-Aid
Ddasaccident765, Hd-Aid
Global CWD Repository
The deminer was instructed by his Section Leader to move the UXO and place the item concerned in the demolition pit, which was located 21 metres away from the deminer’s working area / lane. On the way to the demolition pit the deminer accidentally dropped the UXO and according to the Section Leader, the deminer dropped the UXO directly on to stone that was in the ground and subsequently the UXO detonated. Timings for the accident were recorded as follows:
Ddasaccident596, Hd-Aid
Ddasaccident596, Hd-Aid
Global CWD Repository
The clearance operation on mentioned task was started by [Demining group] DT-12 on 1st of November 09. On 10th of November 09 at 07:40, while the second break period started, the team leader of the team asked a deminer for his scraper and then walked down to a clearance lane without informing any other team members of his intention. On 07:42 Team leader initiated a POMZ mine causing him to receive the injuries that led to his death. He ignored his job description and the [Demining group] SOPs. He may have been thinking that this POMZ is of no danger, …
Ddasaccident620, Hd-Aid
Ddasaccident620, Hd-Aid
Global CWD Repository
On 5th Nov 2009 at 08:45 am deminer [Victim No.1] was working in his clearance lane: he was removing excavated soil from the target spot that suddenly his excavation tool touched a mine and caused it to go off. As a result of the accident, the deminer got severe injuries to his face, eyes and left hand (lost his one eye).
Ddasaccident601, Hd-Aid
Ddasaccident601, Hd-Aid
Global CWD Repository
On 1st Nov 2009, at 02:45 pm during the rest time, [the Victim] a deminer of mentioned team found an unknown item and tried to touch it. According to the investigation report, the item was a rifle Grenade of 40mm which was exploded as a result of irresponsible action of the victim deminer. As it was the break time of the team and the deminer was without visor and PPE, therefore, he lost his right hand, left eye and sustained jaw and leg fracture.
Ddasaccident708, Hd-Aid
Ddasaccident708, Hd-Aid
Global CWD Repository
The 39-year-old [the Victim], a MACC member from Mozambique, died after an anti-tank mine exploded at approximately 8am yesterday in a minefield near Yeri, some 10 kilometres south-east of Nicosia.
Ddasaccident646, Hd-Aid
Ddasaccident646, Hd-Aid
Global CWD Repository
On 11 Oct 2009 at 12:15 am while [the Victim] deminer was excavating a detected signal in his clearance lane, his bayonet hit top of an anti-personnel mine and caused it to go off. According to the investigation report, it seems that the deminer started the excavation drill directly from the centre of the detected signal by his bayonet and caused the mine to be exploded. The deminer had the PPE and visor but as the visor was not properly used so he got some superficial injuries on his face, eyes.
Ddasaccident641, Hd-Aid
Ddasaccident641, Hd-Aid
Global CWD Repository
On 10 Oct 2009 at 11:20 hrs when [the Victim] deminer was working in his clearance lane with a pickaxe that suddenly an explosion happened. As per investigation report the deminer was using pickaxe instead of bayonet because the ground surface was hard. He started to prepare a trench by pickaxe from second reading marker for further investigation of the signal, but there was a stone in close vicinity of pinpointed spot and the deminer wanted to remove it, so his pickaxe might touched the PMN mine or the stone put extra pressure on the mine and the explosion happened. …
Ddasaccident613, Hd-Aid
Ddasaccident613, Hd-Aid
Global CWD Repository
On 04 Oct 2009 at 08:35 hrs when [the Victim] deminer was working on a signal in his clearance lane using a pickaxe, he hit the mine on its top and caused it to go off. According to the investigation report the ground surface was hard and the deminer was using the pick without informing his section leader with a wrong procedure for excavation of the detected signal, and caused the mine to be exploded. As a result of the accident, the involve deminer got superficial injures on his face and body.
Ddasaccident701, Hd-Aid
Ddasaccident701, Hd-Aid
Global CWD Repository
While the deminer was working in recovering one of the SMLs in Al Akaider 2 laid with 15 AP mines (M14) and after recovering 9 mines from the same SML and locating a signal in the predicted site for the 10th mine, the signal was strong and continuous which confused the deminer and there is no way to pin point an M14 mine at that area, the deminer start excavating the area from a depth for 40 cm using the heavy RAKE , the soil at that area hard that the deminer was using the RAKE in a hacking motion …
Ddasaccident670, Hd-Aid
Ddasaccident670, Hd-Aid
Global CWD Repository
While the deminer was working in his lane by the end of the working day, he tried to move one AP (M35) mine partially covered in the ground against of the TL instructions using the light RAKE, the mine initiated 1.8 m away from the deminer and caused the wounds and the mentioned injures to the deminer that he wasn’t wearing the visor in the proper way
Ddasaccident657, Hd-Aid
Ddasaccident657, Hd-Aid
Global CWD Repository
On 14 September 2009, a deminer of CBDT-06 was busy in his clearance lane, he detected an unknown device and informed his respective section leader who had 18 year demining experience to check it. The section leader took the device with his left hand from the clearance lane, he started to remove the soil from it, but in this time it was exploded and caused injuries to his left hand fingers. Unprofessional dealing with unknown device caused this accident.
Ddasaccident628, Hd-Aid
Ddasaccident628, Hd-Aid
Global CWD Repository
Deminer was clearing the first 60 cm of one cluster heading toward the centre mine after he cleared the 1st 60 cm by one 1m width with no signals he moved his base stick a head to clear the next 60 cm, then he stepped on the area which considered to be cleared by the same deminer, accidently his foot went down due to the soil collapse under his foot (loose soil), the mine was in a depth of about 30 cm that when the deminer foot dived in the loosen soil he applied a pressure on the mine which …
Ddasaccident624, Hd-Aid
Ddasaccident624, Hd-Aid
Global CWD Repository
The primary cause of this accident is listed as a Field Control inadequacy because the investigators found that there was poor supervision at the time of the accident. The secondary cause is listed as Other because there is not enough detail in the summary to determine what the deminer was doing, and what tool he was using.
Ddasaccident702, Hd-Aid
Ddasaccident702, Hd-Aid
Global CWD Repository
On 28 July 2009 at 08:10 hrs when Ahmed de-miner was working on a signal in his clearance lane by using a pickaxe instead of bayonet, he hit the mine on its top and caused it to go off. According to the investigation report the ground surface was uneven, hard and impossible to work in sitting position, so he has started to investigate the signal in standing position. This was the main reason of initiating mine and accident.
Ddasaccident669, Hd-Aid
Ddasaccident669, Hd-Aid
Global CWD Repository
Deminer Was Clearing the first 60 cm from the centre lane on a depth of 30 cm using the heavy RAKE after he done with the light rake , deminer hit the M14 mine on a depth of 35 cm by the heavy rake which initiate the mine. [The depth appears to be an error, and should perhaps be 15cm.]
Ddasaccident649, Hd-Aid
Ddasaccident649, Hd-Aid
Global CWD Repository
On 13 August 2009 at 07:15 am while [the victim] deminer was excavating a excavating a dog indication in an access lane, his pick touched on the top of PMN 2 anti-personnel mine and caused it to go off. According to the investigation report the deminer has used the pickaxe to investigate the signal found in dog indication instead of the bayonet and it seems as he used the pick directly on the top of signal, so hit the mine and caused the accident. From the location of injuries it seems the deminer has not used his PPE and visor …
Ddasaccident642, Hd-Aid
Ddasaccident642, Hd-Aid
Global CWD Repository
While the deminer was clearing the lane from stones using the light rake he removed the stones not behind him but he conducted a violation of drill and he threw the stones to the left side of the safe lane and one of the stone hit the unknown mine 12 meters forward to the Syrian side at IOE to the contaminated area resulting mine blast.
Ddasaccident705, Hd-Aid
Ddasaccident705, Hd-Aid
Global CWD Repository
The deminer was looking for a missing mine (M14) in the cluster and the metal detector indicated a very weak signal, the deminer started to investigated that signal then the mine initiated that the deminer wasn’t following the proper procedure to approach the mine
Ddasaccident681, Hd-Aid
Ddasaccident681, Hd-Aid
Global CWD Repository
On 21 July 2009 while deminer [the Victim] was working in his clearance lane, investigating a detected signal with his hand trowel, he hit a mine on its top and caused it to go off. The weather was hot and the ground surface was hard and dry, so it seems that the deminer had used his excavation tool by force and carelessly and directly on pinpointed spot so touched the top of mine and caused the accident. As the deminer was dressed with PPE (vest, helmet and visor according to [Demining group] SOPs), so his face, neck and chest remained …
Ddasaccident675, Hd-Aid
Ddasaccident675, Hd-Aid
Global CWD Repository
Narrative: While the deminer was trying to investigate a signal using the heavy RAKE and after he pinpointed it , and finished with the light RAKE the deminer hit the non visible AP mine (M14) by the heavy RAKE on the pressure plate which initiated the mine 2.2 metres away from the deminer.
Ddasaccident671, Hd-Aid
Ddasaccident671, Hd-Aid
Global CWD Repository
The burner prepared one MK5 stuck mine inside the stuck mine burning pit; he burned the mine in the right procedure and lift the burning area to a safe distance. The mine took a long waiting time to be burned that caused the deminer to go back to the burning area to check the reason, on his way back to the burning area the MK5 stuck mine blasted and small fragments hit the burner in his chin and face and caused the some injuries.
Ddasaccident752, Hd-Aid
Ddasaccident752, Hd-Aid
Global CWD Repository
On 1st July 2009 MU-16 of [Demining group] started clearance operation on mentioned task. On 08 July 2009 at 0919hrs while [the Victim] was investigating a signal in his clearance lane, he found two bullets. He re-checked the spot and found the same signal, this process repeated for three times. Finally he found a root stump in the excavation trench with a thickness of around 2.5 cm and started to remove it, because it was blocking further excavation there. However the deminer had proper tool in his toolkit to cut such obstacles, but he tried to cut it with his …
Ddasaccident623, Hd-Aid
Ddasaccident623, Hd-Aid
Global CWD Repository
The incident caused by individual mistake while the deminer using the heavy RAKE in a hacking motion not as the proper procedure the Raking motion, and most of the mines in the area are surfaces mines that they can be recovered just with the usage of the light RAKE even if that will cost the deminer more sweat but it will still safer.
Ddasaccident604, Hd-Aid
Ddasaccident604, Hd-Aid
Global CWD Repository
While the deminer try to investigate a signal in lane 15 (12 O’clock mine) he didn’t approached the mine in the proper procedure which caused the deminer to hit the mine from the top of the pressure plate and initiate the mine 2.2 m away from the deminer (the distance of the heavy RAKE).
Ddasaccident824, Hd-Aid
Ddasaccident824, Hd-Aid
Global CWD Repository
On 1st July 2009 at [International demining organisation] BAC Task CBU-681, a detonation of a US M series submunition occurred while [the Victim] an [International demining organisation] Searcher ID No. LS 444 was conducting subsurface search and excavating the signals. [The Victim] sustained injuries in his left arm, little finger.
Based on all available evidence, the BOI team concludes that the immediate response to the accident by the team leader and the treatment by the medic enabled an effective casevac and subsequent medevac from the task to Najdeh hospital in Nabatiyeh. Supervised by both the TFM and Site Supervisor.
Ddasaccident712, Hd-Aid
Ddasaccident712, Hd-Aid
Global CWD Repository
On 18 April 2009 [Demining group] DT-05 started clearance operation on mentioned task, they cleared around 19830 sqm area and found/destroyed 4 anti-personnel mines and 2 UXO till the accident time. On 27 June 2009 at 11:15 am the deminer [the Victim] was working in his clearance lane, he found a signal behind some stones, the investigation of signal was impossible with bayonet so he informed the section leader and sought his advice. Section leader instructed him to use pick, but a stone in front of pinpointed signal did not let the pick to be used easily. Therefore, the deminer …
Ddasaccident690, Hd-Aid
Ddasaccident690, Hd-Aid
Global CWD Repository
Today afternoon one mine blast at Al Kaider 4, Team 5 (female deminer team) at 1550 hrs, deminer [the Victim] received the first aid treatment by the medic onsite, a superficial wound (4 to 6 mm) X 2 in her Lt. upper side of the arm, and no any other injuries noticed. Deminer evacuated to KAUH where she received cleaning and dressing of the wounds, X-ray done to clear no any fragmentations in the Arm, deminer received Anti Tetanus and Antibiotics and discharged from the hospital at 1710hrs, No sick leave given by KAUH doctors. Deminer advised to reach the …
Ddasaccident682, Hd-Aid
Ddasaccident682, Hd-Aid
Global CWD Repository
At 07:25 am the 21st of June 2009 while am working on 9 o’clock mine in section 4 Sabha 8, I was following all the procedures in the manual clearing and after I finished the first box I used the light rake first and when it was not responding to the hard ground I turned to the heavy rake to release the upper layer of the sand and grass, I pulled using the heavy rake then the accident happened suddenly while am working.
Ddasaccident734, Hd-Aid
Ddasaccident734, Hd-Aid
Global CWD Repository
[Demining group] is subcontracted by US-DOD for mine clearance in Bagram Air Field. On 15 June 2009, when the [Demining group] US-DOD related team was working on a BAC task inside the BAF, experienced an uncontrolled detonation. The accident happened when [the Victim] the deminer was excavating a detected signal using a small pick; he found a metal plate and decided to excavate beneath the metal plate, during the excavation drill his excavation tool might touched the mine and caused it to go off.