Open Access. Powered by Scholars. Published by Universities.®
Physical Sciences and Mathematics Commons™
Open Access. Powered by Scholars. Published by Universities.®
Articles 1 - 14 of 14
Full-Text Articles in Physical Sciences and Mathematics
Numerical Simulation Analysis Of Anti-Blast Impact Of Underground Rescue Capsule Based On Ls-Dyna, Zhang Fan, Yuanhua Yang, Xiaoxu He, Deng Yu
Numerical Simulation Analysis Of Anti-Blast Impact Of Underground Rescue Capsule Based On Ls-Dyna, Zhang Fan, Yuanhua Yang, Xiaoxu He, Deng Yu
Journal of System Simulation
Abstract: Aiming at the strength problem of the underground rescue cabin under explosion impact load, a finite element model of overall explosion impact load and fluid-solid coupling structure response is established in transient dynamic soft LS-DYNA. The flow field impact load is generated by explosion algorithm, and the propagation of the impact load in the air is calculated. The dynamic response of the rescue cabin structure under the impact load is calculated by the fluid-solid coupling method. The results show that the maximum load occurs on the end surface closest to the explosion source, and the structural deformation is small …
Fatigue Life Prediction Of Turbine Blades Based On Qar Data, Pi Jun, Shuwei Gao, Jiangbo Huang, Huang Lei, Ma Long
Fatigue Life Prediction Of Turbine Blades Based On Qar Data, Pi Jun, Shuwei Gao, Jiangbo Huang, Huang Lei, Ma Long
Journal of System Simulation
Abstract: Based on the characteristics of the high-pressure turbine blade, a numerical simulation method for the actual load spectrum of the high-pressure turbine blade of the civil aircraft engine based on the QAR data is proposed. The actual service load spectrum of the engine recorded during aircraft flight is extracted from the QAR data; the time history of centrifugal force, aerodynamic force and thermal stress of the turbine blade in actual use is obtained by means of finite element simulation; and with life prediction model, the actual service life of the blade is estimated. This method provides a reliable …
Numerical Simulation Of Spread And Infection Risk Of Respiratory Pathogens In The Aircraft Cabin, Jiaquan Lin, Fengshan Sun, Yachong Li
Numerical Simulation Of Spread And Infection Risk Of Respiratory Pathogens In The Aircraft Cabin, Jiaquan Lin, Fengshan Sun, Yachong Li
Journal of System Simulation
Abstract: In order to study the transmission law of respiratory pathogens through the breath of the sick passengers in the aircraft cabin and reduce the risk of infection, the numerical model of respiratory pathogens spread in Boeing737 economy cabin is established. The dynamic propagation process of respiratory pathogens released by the sick passenger is simulated. The risk of infection for other passengers is obtained. Taking SEI (Susceptible Exposure Index) as an evaluation index,,the seats with the least risk of infection for other passengers are obtained based on the simulated data by changing the seats of the sick passengers. Some seats …
Numerical Simulation For Airflow Field Around Car Wheels, Haibo Huang, Xudong Yu, Qingguo Liu, Zhang Tao, Jianan Dong
Numerical Simulation For Airflow Field Around Car Wheels, Haibo Huang, Xudong Yu, Qingguo Liu, Zhang Tao, Jianan Dong
Journal of System Simulation
Abstract: The airflow field characteristics around the wheels have great influence on the flying of road dust and tire wear particles. Using the rotating wall boundary technology, an aerodynamic model of the vehicle-tire was built and verified. The airflow field around the wheels was obtained. The results show that the two airflows between the wheel and the wheel guard meet leading to the vortex. The airflows mainly overflow near the intersection. Due to the significant pumping effects, the airflow tends to fly to outside and upward near the front and rear wheels, respectively. In the …
Simulation Of Gas-Liquid Mixing Flow In A Stirred Tank With Inverted Umbrella-Type Surface Aerator, Wenli Wei, Weili Lou, Panpan Li, Yuling Liu
Simulation Of Gas-Liquid Mixing Flow In A Stirred Tank With Inverted Umbrella-Type Surface Aerator, Wenli Wei, Weili Lou, Panpan Li, Yuling Liu
Journal of System Simulation
Abstract: The way of computational fluid dynamics with k-ε turbulence model as well as multiple reference frame method was used to simulate the hydraulic characteristics of gas-liquid mixing flow in a stirred tank installed with an inverted umbrella-type surface aerator. The inverted umbrella aerator consists of eight blades, and rotates at 5.23rad/s. The main purpose of this simulation is to study the distributions of air volume fraction and characteristics of mixing flow. The simulation results show that the distribution of the mixing flow is symmetrical; the change rules of the gas distribution at different positions along the axis direction are …
Finite Element Numerical Simulation Of Pre-Damaged Reinforced Concrete Beam, Jiaquan Wu, Hongyan Li, Ye Fei, Xinyu Zhang, Kun Ma
Finite Element Numerical Simulation Of Pre-Damaged Reinforced Concrete Beam, Jiaquan Wu, Hongyan Li, Ye Fei, Xinyu Zhang, Kun Ma
Journal of System Simulation
Abstract: Based on the theory of model analysis, the general variation of model parameters, such as the structure natural frequency, displacement mode, curvature mode and strain mode etc.model of reinforced concrete beams with different damage locations and different damage states are reversely studied by finite element numerical simulation with the pre-damaged reinforced concrete beam structure as the research object, model and the aptability, sensitivity in the reinforced concrete structure damage identification are discussed. The results show that the frequency and displacement mode can not effectively reflect the existence of structural damage, but curvature mode and strain mode can reflect the …
Mechanism Of Biofouling Control On Micro-Structured Surface, Chunxi Li, Quanxi Xue, Zhang Shuo, Xuemin Ye
Mechanism Of Biofouling Control On Micro-Structured Surface, Chunxi Li, Quanxi Xue, Zhang Shuo, Xuemin Ye
Journal of System Simulation
Abstract: Changing the wall microstructure geometry can improve the performance of surface antifouling and selfcleaning. A 3D numerical simulation of microfluidic in the near-wall region attached with microorganisms is performed with Fluent, and the kinetic and dynamic characteristics of fluid in the near- wall region are examined. The inherent mechanism of antifouling on microwell surfaces is discussed. Results reveal that streamwise vortices are formed in the microwells, thus the distinctly periodic fluctuations of velocity, strain rate and wall shear stress on microwell surfaces are exhibited, resulting in the interference on microorganisms migration and the harder adhesion of microorganisms to …
Research On Impact Performance Of Layer-Number Of 2024 Aerospace Aluminum Alloy Immobilized Target Against Bird Strike, Jianxin Xu, Jiajun Yuan, Yunfei Deng
Research On Impact Performance Of Layer-Number Of 2024 Aerospace Aluminum Alloy Immobilized Target Against Bird Strike, Jianxin Xu, Jiajun Yuan, Yunfei Deng
Journal of System Simulation
Abstract: In order to investigate the anti-penetration performance of target plate of the same thickness under different number of layers, a model of SPH(Smoothed Particle Hydrodynamics) cylindrical bird bullet to impact 2024 aerospace aluminum alloy Lagrange target is established by using the AUTODYN finite element software. The thickness of target is 1 mm, 2 mm, 3 mm and 4 mm, 1 mm and 2 mm target plate is divided into single and double, 3 mm target plate is divided into single, double and three layers, 4 mm target plate is divided into single, double and four layers. …
Simulation Research Of Closed Control System For Equipment Operation And Maintenance With Parts Inventory System, Li Bing, Wang Xing, Xuan Hua, Xueyuan Wang
Simulation Research Of Closed Control System For Equipment Operation And Maintenance With Parts Inventory System, Li Bing, Wang Xing, Xuan Hua, Xueyuan Wang
Journal of System Simulation
Abstract: The highly reliable equipment operation and maintenance system is very important to enterprise’s safety production. The control system for equipment operation and maintenance with a parts inventory system is generally discussed. The proposed system is composed of a parts inventory subsystem, an equipment operation subsystem and an equipment maintenance subsystem as parallel and series form. And the control system belongs to a multi-level closed loop system. The system is a kind of discrete event dynamic system. So it is difficult to be described with traditional mathematical analysis methods. The multi-class closed control system simulation model is established with Simulink …
Cfd Based Analysis And Improvement Of The Flow Field Of Stirred Tank Reactor For Crystallization, Zewen Ma, Liu Tao, Xudong Sun
Cfd Based Analysis And Improvement Of The Flow Field Of Stirred Tank Reactor For Crystallization, Zewen Ma, Liu Tao, Xudong Sun
Journal of System Simulation
Abstract: The computational fluid dynamics (CFD) method is adopted to analyze the flow field of 1L stirred tank reactor for crystallization. A popular CFD software named FLUENT is used to analyze the influence of a single layer turbine agitator on the flow field in a stirred tank reactor. The standard turbulence model of k-ε is employed to simulate a three-dimensional single-phase flow field of water solution. Simulation studies indicate that the simulated flow field is consistent with real distribution of the flow field, while it is seen that uniform blending can be achieved in the lower and middle parts of …
Penetrating Capability Of Different Annular Shaped Charge Warhead, Tan Bo, Hongjie Liu, Run Miao, Zeng Liang
Penetrating Capability Of Different Annular Shaped Charge Warhead, Tan Bo, Hongjie Liu, Run Miao, Zeng Liang
Journal of System Simulation
Abstract: On the basis of the existing missile warhead, an annular shaped charge is added in the front of warhead without changing the size and increasing the weight of the warhead. ANSYS/LS-DYNA is used to simulate the whole process of the formation of annular jet and penetration of a double target and analyze the movement characteristics of two kinds of different annular jet in the air. The target damage effect is acquired. The calculation results show that the difference of the penetration ability on the double layer target of jet between center -ball shaped charge and that of the hollow …
Research Of Turbulence Model Parameters Correction For Oil Flow Of Pipeline, Jisen Wang, Jia Qian, Chen Chen, Yaping Zhang, Du Jiang
Research Of Turbulence Model Parameters Correction For Oil Flow Of Pipeline, Jisen Wang, Jia Qian, Chen Chen, Yaping Zhang, Du Jiang
Journal of System Simulation
Abstract: Because of the limitation of the parameters in the Realizable k-ε two equations model, the model is no longer suitable to simulate the pressure loss of the turbulent oil flow of pipelines. A mathematical model of the oil flow of pipeline is built, and the Realizable k-ε model default parameters are modified according to the test results of YH-15 aviation hydraulic oil to obtain new parameters used to simulate the pressure loss in other conditions. Compared to the model with default parameters, numerical simulations and experimental results show that the maximum relative error is reduced …
Numerical Simulation Of Thermal Comfort And Pm10 Concentration Distribution In A320 Aircraft Cabin, Jiaquan Lin, Ruiting Wang
Numerical Simulation Of Thermal Comfort And Pm10 Concentration Distribution In A320 Aircraft Cabin, Jiaquan Lin, Ruiting Wang
Journal of System Simulation
Abstract: A model of A320 aircraft cabin and human body was established using CFD. Temperature field, velocity field and PM10 concentration field was simulated at different air supply rate of the bridge load air conditioning based on mathematical model of fluid dynamics in cabin. The values of the ADPI and drainage efficiency were calculated respectively at different air supply rate. The optimal supply air velocity evaluation function was constructed based on ADPI and drainage efficiency. The wind speed, temperature and PM10 concentration of the sample points were used to calculate the value of the evaluation function with different …
Simulation Of Migration Of Hexavalent Chromium In Groundwater, Liu Ling, Liping Xiao, Xilin Li
Simulation Of Migration Of Hexavalent Chromium In Groundwater, Liu Ling, Liping Xiao, Xilin Li
Journal of System Simulation
Abstract: Taking chromite ore processing residue site in Shenyang city of Liaoning province as a research object, the static adsorption experiment and the dynamic soil column experiment were carried out, and the adsorption characteristics and the migration law for hexavalent chromium of chromite ore processing residue leachate were analyzed in the groundwater system. A coupled dynamic mathematical model was developed for simulating hexavalent chromium migration in the groundwater system. Numerical simulation of hexavalent chromium migration in groundwater for 40 years before the anti-seepage measure and for 60 years after the anti-seepage measure was completed by using Visual Modflow software. The …