Physical Sciences and Mathematics Commons^™

Fast Super-Resolution With Affine Motion Using An Adaptive Wiener Filter And Its Application To Airborne Imaging, Russell C. Hardie, Kenneth J. Barnard, Raúl Ordóñez

Electrical and Computer Engineering Faculty Publications

Fast nonuniform interpolation based super-resolution (SR) has traditionally been limited to applications with translational interframe motion. This is in part because such methods are based on an underlying assumption that the warping and blurring components in the observation model commute. For translational motion this is the case, but it is not true in general. This presents a problem for applications such as airborne imaging where translation may be insufficient. Here we present a new Fourier domain analysis to show that, for many image systems, an affine warping model with limited zoom and shear approximately commutes with the point spread function …

Chaotic Bandgaps In Hybrid Acousto-Optic Feedback And Their Implications, Monish Ranjan Chatterjee, Mohammed A. Al-Saedi

Electrical and Computer Engineering Faculty Publications

The nonlinear dynamics of a hybrid acousto-optic device was examined from the perspective of the Lyapunov exponent (LE) and bifurcation maps. The plots for LE versus system parameters and bifurcation maps have recently been examined against known simulation results including chaotic encryption experiments [1]. It is verified that the "loop gain" (feedback gain (β) times incident light amplitude (Iin) needs to be greater than one as a necessary , but not sufficient condition for the onset of chaos.

It is found that for certain combinations of β, Iin, net bias voltage (αtοt), and the initial value of the first-order scattered …

Super-Resolution For Imagery From Integrated Microgrid Polarimeters, Russell C. Hardie, Daniel A. Lemaster, Bradley Michael Ratliff

Electrical and Computer Engineering Faculty Publications

Imagery from microgrid polarimeters is obtained by using a mosaic of pixel-wise micropolarizers on a focal plane array (FPA). Each distinct polarization image is obtained by subsampling the full FPA image. Thus, the effective pixel pitch for each polarization channel is increased and the sampling frequency is decreased. As a result, aliasing artifacts from such undersampling can corrupt the true polarization content of the scene. Here we present the first multi-channel multi-frame super-resolution (SR) algorithms designed specifically for the problem of image restoration in microgrid polarization imagers. These SR algorithms can be used to address aliasing and other degradations, without …

Examination Of Chaotic Signal Encryption And Recovery For Secure Communication Using Hybrid Acousto-Optic Feedback, Monish Ranjan Chatterjee, Mohammed A. Al-Saedi

Electrical and Computer Engineering Faculty Publications

Generation of chaos from acousto-optic (A-O)Bragg cell modulators with an electronic feedback has been studied for over 3 decades. Since an acousto-optic Bragg cell with zeroth- and first-order feedback exhibits chaotic behavior past the threshold for bistability, such a system was recently examined for possible chaotic encryption of simple messages (such as a low-amplitude sinusoidal signal) applied via the bias input of the sound cell driver. Subsequent recovery of the message signal was carried out via a heterodyne-type strategy employing a locally generated chaotic carrier, with threshold parameters matched to the transmitting Bragg cell.

In this paper, we present numerical …

Scalar Em Beam Propagation In Inhomogeneous Media, John M. Jarem, Partha P. Banerjee

Electrical and Computer Engineering Faculty Publications

In the previous chapter, we reviewed some of the mathematical preliminaries that will be useful later on in the text. In this chapter, we discuss some of the basic concepts of scalar wave propagation, and discuss an important numerical method, called the beam propagation method (BPM), to study propagation in linear media and in media with induced nonlinearities. Furthermore, we also discuss propagation through induced gratings, both transmission and reflection type, in order to assess energy coupling between participating waves. Finally, we introduce readers to an important characterization method, called the z-scan method, which is often used to determine the …

Binary And Core-Shell Nanoparticle Dispersed Liquid Crystal Cells For Metamaterial Applications, George Nehmetallah, Rola Aylo, Partha P. Banerjee

Electrical and Computer Engineering Faculty Publications

We theoretically explored the feasibility of a tunable metamaterial using binary as well as core-shell nanoparticle dispersed liquid crystal cells in the infrared and optical regimes. Owing to the spatial variation of the permittivity of the liquid crystal host upon the application of a bias voltage, the host was decomposed into a layered medium and the effective refractive index recalculated for each layer due to the distribution of polaritonic and plasmonic nanoparticles.

The scattering, extinction, and absorption of such a nanoparticle dispersed liquid crystal cell were also found. Depending on the applied voltage bias across the liquid crystal host, the …

Understanding Industrial Energy Use Through Lean Energy Analysis, Brian Abels, Franc Server, J. Kelly Kissock, Dawit Ayele

Mechanical and Aerospace Engineering Faculty Publications

Due to rising energy costs and global climate change, many industries seek to improve their energy efficiency. This paper describes a three-step method to analyze utility billing, weather, and production data to understand a company’s energy performance over time. The method uses regression modeling of utility billing data against weather and production data. The regression models are then driven with typical weather and production data to calculate the ‘normal annual consumption’, NAC. These steps are repeated on sequential sets of 12 months of data to generate a series of ‘sliding’ NACs and regression coefficients. The method can quantify successful energy …

Measuring Progress With Normalized Energy Intensity, Nathan Lammers, J. Kelly Kissock, Brian Abels, Franc Server

Mechanical and Aerospace Engineering Faculty Publications

Energy standard ISO 50001 will require industries to quantify improvement in energy intensity to qualify for certification. This paper describes a four-step method to analyze utility billing, weather, and production data to quantify a company's normalized energy intensity over time. The method uses 3-pararameter change-point regression modeling of utility billing data against weather and production data to derive energy signature equations. The energy signature equation is driven by typical weather and production data to calculate the 'normal annual consumption', NAC, and divided by typical production to calculate 'normalized energy intensity' NEI. These steps are repeated on sequential sets of 12 …

Optimizing Compressed Air Storage For Energy Efficiency, Brian Abels, J. Kelly Kissock

Mechanical and Aerospace Engineering Faculty Publications

Compressed air storage is an important, but often misunderstood, component of compressed air systems. This paper discusses methods to properly size compressed air storage in load-unload systems to avoid short cycling and reduce system energy use. First, key equations relating storage, pressure, and compressed air flow are derived using fundamental thermodynamic relations. Next, these relations are used to calculate the relation between volume of storage and cycle time in load-unload compressors. It is shown that cycle time is minimized when compressed air demand is 50% of compressor capacity. The effect of pressure drop between compressor system and storage on cycle …

Improving Compressed Air Energy Efficiency In Automotive Plants: Practical Examples And Implementation, Nasr Alkadi, J. Kelly Kissock

Mechanical and Aerospace Engineering Faculty Publications

The automotive industry is the largest industry in the United States in terms of the dollar value of production [1]. U.S. automakers face tremendous pressure from foreign competitors, which have an increasing manufacturing presence in this country. The Big Three North American Original Equipment Manufacturers (OEMs)-General Motors, Ford, and Chrysler-are reacting to declining sales figures and economic strain by working more efficiently and seeking out opportunities to reduce production costs without negatively affecting the production volume or the quality of the product. Successful, cost-effective investment and implementation of the energy efficiency technologies and practices meet the challenge of maintaining the …

Anisotropic Electrical Properties Of Nanostructured Metallic Thin Films, Mo Ahoujja, Piyush Shah, Andrew Saragan, Said Elhamri, Elena A. Guliants

Electrical and Computer Engineering Faculty Publications

High surface area, porous, metallic (Ti, Cr) nanorod thin ¯lms with columnar microstructure can be deposited using conventional physical vapor deposition technique of E-beam evaporation. The technique relies on the physical vapor deposition onto a static substrate oriented in a position where °ux from the source material (Ti, Cr) arrives at oblique angle. The adatoms provides geometrical shadowing which results in growth of nanorod columns in the direction of vapor source. Deposition conditions such as angle of the incoming vapor °ux, substrate temperature, surface di®usion etc. have strong in°uence on the shape and arrangement of the columnar thin ¯lms. In …

Single-Beam Holographic Tomography Creates Images In Three Dimensions, George Nehmetallah, Partha P. Banerjee, Nickolai Kukhtarev

Electrical and Computer Engineering Faculty Publications

In digital holography (DH), the interference between light scattered from an object and a reference wave is recorded using a CCD camera. DH has various advantages over analog holography: no film processing is needed, reconstruction is performed using numerical methods, and no further experimental setup is necessary. However, one of the disadvantages of DH is that current CCDs have a resolution of approximately 1,000 lines/mm, which is less than that of photographic film.

Fluorinated Templates For Energy-Related Nanomaterials And Applications, Mohammed J. Meziani, Fushen Lu, Li Cao, Christopher E. Bunker, Elena A. Guliants, Ya-Ping Sun

Electrical and Computer Engineering Faculty Publications

Fluorinated ionomer membranes, as represented by the commercially available Nafion films, are macroscopically homogeneous and optically transparent but microscopically inhomogeneous with the presence of nanoscale hydrophilic cavities. These cavities serve as nanoscale reactors for the synthesis of nanoparticles from a variety of materials. The membranes with embedded nanoscale semiconductors, still optically transparent, have been used as sheet-photocatalysts for energy conversion applications, while those with embedded reactive metals used as nano-energetic materials for hydrogen generation and beyond. This chapter provides an overview on the templated synthesis of nanomaterials in fluorinated ionomer membranes and the various energy-related applications of this unique class …

Comparison Of Turbulence-Induced Scintillations For Multi-Wavelength Laser Beacons Over Tactical (7 Km) And Long (149 Km) Atmospheric Propagation Paths, Mikhail Vorontsov, Venkata S. Rao Gudimetla, Gary W. Carhart, Thomas Weyrauch, Svetlana Lachinova, Ernst Polnau, Joseph Rierson, Leonid A. Beresnev, Jony Jiang Liu, Jim F. Riker

Electrical and Computer Engineering Faculty Publications

We report results of the experimental analysis of atmospheric effects on laser beam propagation over two distinctive propagation paths: a long-range (149 km) propagation path between Mauna Loa (Island of Hawaii) and Haleakala (Island of Maui) mountains, and a tactical-range (7 km) propagation path between the roof of the Dayton Veterans Administration Medical Center (VAMC) and the Intelligent Optics Laboratory (IOL/UD) located on the 5th floor of the University of Dayton College Park Center building. Both testbeds include three laser beacons operating at wavelengths 532 nm, 1064 nm, and 1550 nm and a set of identical optical receiver systems with …

Wind Energy Potential For Reverse Osmosis Desalination Plants In La Guajira, Colombia, Carlos Martinez-Smit

Faculty-Selected Student Works

Project report required by the Master of Science Degree in Renewable and Clean Energy.

Abstract:

The region of La Guajira, located in the north of Colombia, has a lot of potential for wind power with annual average wind speeds up to 11 m/s at 10 m height in some locations, according to the national wind map. Most of the wind potential is located in Upper Guajira, where 90% of the population is indigenous Wayuu people (among the country’s poorest population) and it is also characterized with low precipitation, 500 mm/yr, high evapotranspiration, 1500 mm/yr, and low humidity. All this creates …

Multi-Pose Face Recognition And Tracking System, Binu Muraleedharan Nair, Jacob Foytik, Richard Tompkins, Yakov Diskin, Theus Aspiras, Vijayan K. Asari

Electrical and Computer Engineering Faculty Publications

We propose a real time system for person detection, recognition and tracking using frontal and profile faces. The system integrates face detection, face recognition and tracking techniques. The face detection algorithm uses both frontal face and profile face detectors by extracting the 'Haar' features and uses them in a cascade of boosted classifiers. The pose is determined from the face detection algorithm which uses a combination of profile and frontal face cascades and, depending on the pose, the face is compared with a particular set of faces having the same range for classification. The detected faces are recognized by projecting …