Open Access. Powered by Scholars. Published by Universities.®
Physical Sciences and Mathematics Commons™
Open Access. Powered by Scholars. Published by Universities.®
Articles 1 - 6 of 6
Full-Text Articles in Physical Sciences and Mathematics
Wet-Spinning Of Pedot:Pss/Functionalized-Swnts Composite: A Facile Route Toward Production Of Strong And Highly Conducting Multifunctional Fibers, Rouhollah Jalili, Joselito M. Razal, Gordon G. Wallace
Wet-Spinning Of Pedot:Pss/Functionalized-Swnts Composite: A Facile Route Toward Production Of Strong And Highly Conducting Multifunctional Fibers, Rouhollah Jalili, Joselito M. Razal, Gordon G. Wallace
Gordon Wallace
With the aim of fabricating multifunctional fibers with enhanced mechanical properties, electrical conductivity and electrochemical performance, we develop wet-spinning of composite formulation based on functionalized PEG-SWNT and PEDOT:PSS. The method of addition and loading are directly correlated to the quality and the ease of spinnability of the formulation and to the mechanical and electrical properties of the resultant fibers. Both the fiber modulus (Y) and strength (σ) scaled linearly with PEG-SWNT volume fraction (Vf). A remarkable reinforcement rate of dY/dVf = 417 GPa and dσ/dVf = 4 GPa were obtained when PEG-SWNTs at Vf ≤ 0.02. Further increase of PEG-SWNTs …
Fabrication Of Graphene Electrodes By Electrophoretic Deposition And Their Synergistic Effects With Pedot And Platinum, Widsanusan Chartarrayawadee, Simon E. Moulton, Chee O. Too, Gordon G. Wallace
Fabrication Of Graphene Electrodes By Electrophoretic Deposition And Their Synergistic Effects With Pedot And Platinum, Widsanusan Chartarrayawadee, Simon E. Moulton, Chee O. Too, Gordon G. Wallace
Gordon Wallace
This research presents a useful electrophoretic deposition (EPD) technique for electrode fabrication from an aqueous colloidal solution of graphene to produce graphene electrodes by the deposition of graphene on to indium-tin oxide (ITO) coated glass. Resultant graphene electrodes are composited with conducting polymer (PEDOT), and platinum nanoparticles, to investigate their synergistic effects. Firstly, PEDOT is composited with graphene by electropolymerization on to the graphene layer. The graphene/PEDOT electrodes demonstrate an improvement in electrochemical response in tetrabutylammonium perchlorate/ acetonitrile solution. Secondly, graphene electrodes are composited with platinum by EPD of platinum nanoparticles on to the graphene layer. The resultant graphene/platinum electrodes …
Cell Attachment And Proliferation On High Conductivity Pedot-Glycol Composites Produced By Vapour Phase Polymerisation, Elise M. Stewart, Manrico Fabretto, Mischa Mueller, Paul J. Molino, Hans J. Griesser, Robert D. Short, Gordon G. Wallace
Cell Attachment And Proliferation On High Conductivity Pedot-Glycol Composites Produced By Vapour Phase Polymerisation, Elise M. Stewart, Manrico Fabretto, Mischa Mueller, Paul J. Molino, Hans J. Griesser, Robert D. Short, Gordon G. Wallace
Gordon Wallace
High conductivity poly(3,4-ethylene dioxythiophene) (PEDOT) was synthesised using vacuum vapour phase polymerization (VVPP). The process produces PEDOT composites which incorporate glycol within the polymer. To assess biocompatibility, a suite of analytical techniques were utilised in an effort to characterise the level of glycol present and its impact on cell attachment and proliferation. A small decrease in fibroblast cell attachment and proliferation was observed with increasing glycol content within the PEDOT composite. Keratinocyte cell attachment and proliferation by comparison showed an increase. As such, the results herein indicate that cell attachment and proliferation depends on the individual cell lines used and …
Exploiting High Quality Pedot:Pss-Swnt Composite Formulations For Wet-Spinning Multifunctional Fibers, Rouhollah Jalili, Joselito M. Razal, Gordon G. Wallace
Exploiting High Quality Pedot:Pss-Swnt Composite Formulations For Wet-Spinning Multifunctional Fibers, Rouhollah Jalili, Joselito M. Razal, Gordon G. Wallace
Gordon Wallace
In order to exploit the inherent properties of carbon nanotubes (CNT) in any polymer composite, systematic control of carbon nanotube loading and protocols that mitigate against CNT bundling are required. If such composites are to be rendered in fiber form via wet-spinning, then CNT bundling during the coagulation process must also be avoided. Here we have achieved this by utilizing highly exfoliated single walled carbon nanotubes (SWNT) and poly(3,4-ethylenedioxythiophene):poly(styrenesulfonicacid) (PEDOT:PSS) to obtain wet-spinnable composite formulations at various nanotube volume fractions (Vf). The addition of only 0.02 Vf of aggregate-free and individually dispersed SWNT resulted in a significant enhancement of modulus, …
Microsecond Dye Regeneration Kinetics In Efficient Solid State Dye-Sensitized Solar Cells Using A Photoelectrochemically Deposited Pedot Hole Conductor, Attila J. Mozer, Dillip K. Panda, Sanjeev Gambhir, B. Winther-Jensen, Gordon G. Wallace
Microsecond Dye Regeneration Kinetics In Efficient Solid State Dye-Sensitized Solar Cells Using A Photoelectrochemically Deposited Pedot Hole Conductor, Attila J. Mozer, Dillip K. Panda, Sanjeev Gambhir, B. Winther-Jensen, Gordon G. Wallace
Gordon Wallace
Microsecond dye-regeneration kinetics was observed in efficient solid state dye-sensitized solar cells using photoelectrochemically deposited poly(3,4-ethylenedioxythiophene (PEDOT) hole conductors using transient absorption spectroscopy. The dye-regeneration rate is orders of magnitude slower than the case using the I-/I3- redox couple or commonly used small molecule hole conductor and is attributed to the low dye to PEDOT ratio within the films.
Flexible And Compressible Goretex-Pedot Membrane Electrodes For Solid-State Dye-Sensitized Solar Cells, Attila J. Mozer, Dillip K. Panda, Sanjeev Gambhir, Anthony C. Romeo, Bjorn Winther-Jensen, Gordon G. Wallace
Flexible And Compressible Goretex-Pedot Membrane Electrodes For Solid-State Dye-Sensitized Solar Cells, Attila J. Mozer, Dillip K. Panda, Sanjeev Gambhir, Anthony C. Romeo, Bjorn Winther-Jensen, Gordon G. Wallace
Gordon Wallace
A porous, flexible electrode based on a PTFE (Teflon) membrane (Goretex) coated with a metallic current collector and a conducting polymer (poly(3,4-ethylenedioxythiophene), PEDOT) has been developed for applications in solidstate dye-sensitized solar cells. Its low sheet resistance and compressibility make it an ideal electrode on uneven TiO2 surfaces with high efficiency and reproducibility. The porous nature of the electrode enables the feed-through of reactants and treatment agents, which opens up exciting opportunities to interface these photoelectrochemical devices with electrocatalytic, energy conversion, and storage systems. Postfabrication bonding of the photoanode and the Goretex-Au-PEDOT electrode is demonstrated.