Physical Sciences and Mathematics Commons^™

Nanoparticles And The Environment: Biopolymer Grafted Cellulose And Screen-Printed Carbon Nanotube Composites, Dominique Henry Porcincula

Master's Theses

A host of environmental issues will define the state of the environment in the 21^st century, with plastic pollution and water shortages among them. While solutions to these problems require large-scale, multipronged solutions, one way we can address them is through material innovation and the use of nanoparticles.

In the first project, we address the issue of plastic pollution by creating nanocomposites of biodegradable polymers (PLA and PCL) with cellulose nanofibrils. Here, PLA and PCL are grafted from the surface of cellulose nanofibrils via ring-opening polymerization of cyclic ester monomers. Polymer-grafted cellulose (PGC) is characterized with structural analysis, solubility …

Functional Nanocomposite Coatings For Use In Food Packaging, Camden N. Webb

Master's Theses

Plastics are a class of materials known for their cost and property advantages, increasing significantly in their usage worldwide. Unfortunately, these benefits come with an increasingly concerning environmental impact. A combination of inadequate disposal options and combinations of materials have led to environmental disasters that will impact generations. One of the worst areas for plastic waste is food packaging. Plastic as a material generally excels at durability and longevity, but as food packaging, it outlives its intended purpose by several orders of magnitude. This leads to plastic food packaging materials sitting in landfill or leading to the environment for hundreds …

Covalent Adaptable Networks For Wood Coatings, Jachin Boaz Clarke

Materials Engineering

Wood swells and shrinks causing problems with seasonal humidity. Applying thick coatings of reactive finishes based on cross-linked polyurethane, epoxy, or polyesters can slow moisture-vapor exchange. However, the use of thick coatings leads to cracking and crazing sooner than thin finishes. This research proposes the addition of 3.3 mol % triazabicyclodecene, a conventionally used covalent adaptable network catalyst, in a commercially available polyester-based wood coating. The self-healing of the wood coating is tested using DMA stress relaxation and compression molding. The result from DMA renders inconclusive and compression molding indicates the novel wood coating oxidizes at elevated temperatures. The wood …

Thermal Degradation Of Erythritol, Sudheendra Gamoji

Physics

The Insulated Solar Electric Cooker (ISEC) is a double walled Aluminum pot with a resistive heater directly connected to a solar panel whose goal is to create and disseminate cheap solar cookers in rural areas that primarily rely on biomass for cooking. Phase Change Materials (PCMs) like Erythritol, a sugar substitute, take a tremendous amount of energy to melt, and when they solidify they release the energy. Through the use of PCMs, the ISECs will produce enough heat to cook food even after the sun sets. However, PCMs like Erythritol degrade over repeated heat exposure, so the purpose of this …

Biomass Estimation Of Marine Biofilms On Plastic Surfaces, Kian Banihashemi, Fernando Javier Gil

Biological Sciences

Plastics have become a major source of marine pollution, which threatens food safety and quality, human health, and marine ecosystems. Due to the drastic negative effects of plastics in a marine environment, alternative biodegradable plastics are being generated that are more eco-friendly and have less environmental impact. Though some of these plastics are known to biodegrade, the process of degradation for bioplastics has not been heavily studied in a marine environment. This pilot project sought to both quantify the process of biodegradation and compare across different methods for effectiveness of biomass estimation, which serves as an indicator of biodegradation. Plastics …

Pressure Driven Desalination Membranes: Lyotropic Liquid Crystals Containing Single Walled Carbon, Matteo A. Del Giudice, Samantha Castillo Merigold

Materials Engineering

This project presents a potential alternative desalination technique that utilizes the ion rejection properties of single walled carbon nanotubes dispersed in a lyotropic liquid crystal (LLC) matrix. Previous research has pointed to the polymerizable surfactant methacryloxy ethyl hexadecyl dimethyl ammonium bromide (C16MA) having capabilities of filtering molecular components smaller than a nanometer, when oriented in cylindrical micelles. SWCNTs were dispersed in deionized water by probe sonication and addition of surfactant cetyltrimethylammonium bromide (CTAB) due to SWCNTs’ hydrophobic properties. Membranes were produced containing 55wt% C16MA, 37wt% DI water, 0.1wt% with respect to the monomer (WRM) SWCNTs, 1.9 wt% WRM 2,2-dimethoxy-2-phenylacetophenone (photointiator), …

Eelgrass (Zostera Marina) Population Decline In Morro Bay, Ca: A Meta-Analysis Of Herbicide Application In San Luis Obispo County And Morro Bay Watershed, Tyler King Sinnott

Master's Theses

The endemic eelgrass (Zostera marina) community of Morro Bay Estuary, located on the central coast of California, has experienced an estimated decline of 95% in occupied area (reduction of 344 acres to 20 acres) from 2008 to 2017 for reasons that are not yet definitively clear. One possible driver of degradation that has yet to be investigated is the role of herbicides from agricultural fields in the watershed that feeds into the estuary. Thus, the primary research goal of this project was to better understand temporal and spatial trends of herbicide use within the context of San Luis …

Pressure Driven Desalination Utilizing Nanomaterials, Fangyou Xie

Master's Theses

Nanomaterials such as graphene oxide and carbon nanotubes, have demonstrated excellent properties for membrane desalination, including decrease of maintenance, increase of flux rate, simple solution casting, and impressive chemical inertness. Here, two projects are studied to investigate nanocarbon based membrane desalination. The first project is to prepare hybrid membranes with amyloid fibrils intercalated with graphene oxide sheets. The addition of protein amyloid fibrils expands the interlayer spacing between graphene oxide nanosheets and introduces additional functional groups in the diffusion pathways, resulting in increase of flux rate and rejection rate for the organic dyes. Amyloid fibrils also provide structural assistance to …

Rheological Studies Of Fully-Formulated Coatings Thickened With Heur: Effects Of Surfactants, Brandon M. Bonilla

Master's Theses

Rheology modifiers such as hydrophobically-modified ethoxylated urethane (HEUR)thickeners are included in waterborne latex coatings to optimize shear-rate dependent viscosity and other rheological properties. While these HEUR polymers are commonly used in industry, the complex chemical interactions that contribute to rheological properties are still not completely understood. Prior work in this area has focused on understanding latex-HEUR and latex-surfactant-HEUR interactions that affect rheological properties. Additionally, studies have been previously conducted to understand the relaxation mechanisms of complex interactions present in HEUR-thickened waterborne latex coatings under various dynamic conditions. The objective of this work is to extend the experimental work to fully-formulated …

Antibacterial Coatings Derived From Novel Chemically Responsive Vesicles, Emily B. Mobley

Master's Theses

In order for a drug, or any material used for the purpose of eliciting a change in an organisms’ physical or chemical state, to be effective it must reach the intended target intact and for a sustained rate over time. Drug delivery systems encapsulate a drug to protect it from degradation, prevent side reactions, increase solubility, improve accumulation rates at target sites, and release drugs at a controlled rate. Controlled and sustained release of drugs is achieved by degradation of the carrier triggered by breaking dynamic chemical bonds caused by changes in the chemical environment such as pH or redox …

Effect Of Polymer Design And Coating Formulation On The Water Uptake And Sensitivity Of Acrylic Water-Borne Films, William Z. Thompson

Master's Theses

Water-borne latex coatings represent a safer, more user-friendly, and environmentally responsible alternative to solvent-borne coatings, and are growing in popularity each year. However, these coatings often exhibit unfavorable performance when exposed to water for extended periods of time. This prolonged exposure often results in water uptake, which may give rise to other detrimental effects such as a decrease in modulus, blushing or water-whitening, reduced serviceable life, and softening of the film. In this study, various polymer composition latex design spaces are studied to develop an understanding of how water uptake can be modulated and minimized using common synthetic approaches. Factors …

Altering An Epoxy-Amine Thermoset's Performance Through Varying Mix Ratios, Kiersten M. Smith

Master's Theses

Epoxy resins are used in a number of different industries and therefore have application-specific material requirements, from satellites that require materials that operate in space, to paints and coatings that require high scratch resistance and mechanical durability, to medical devices, designed to be in continuous contact with biological fluids. Commercial epoxy products come with manufacturer’s information explaining the epoxy properties and recommended preparation processing conditions, which may include epoxy resin to curing agent mix ratio (Part A : Part B), cure time, and cure temperature, for example. Due to proprietary reasons, it can be difficult to understand why these values …

Valorization Of Carrot Processing Waste, Alexandra M. Duval

Master's Theses

Commercial carrot processors produce up to 175,000 tons of carrot waste annually. Carrot Mash (CM) is the term referring to the waste by-product of peeled baby carrot processing. Transportation of carrot processing waste is expensive due to its high- water content (approx. 83-95%). High in bioactive compounds (carotenoids) and dietary fibers, it is expected that its conversion into a value-added by-product is of interest to the carrot processing industry. Hemicellulose-rich plant materials have proven to be a source of oligosaccharides, which are known for their beneficial prebiotic activity. The objectives of this research were to: 1) determine the effect of …

Implementation Of Multivariate Artificial Neural Networks Coupled With Genetic Algorithms For The Multi-Objective Property Prediction And Optimization Of Emulsion Polymers, David Chisholm

Master's Theses

Machine learning has been gaining popularity over the past few decades as computers have become more advanced. On a fundamental level, machine learning consists of the use of computerized statistical methods to analyze data and discover trends that may not have been obvious or otherwise observable previously. These trends can then be used to make predictions on new data and explore entirely new design spaces. Methods vary from simple linear regression to highly complex neural networks, but the end goal is similar. The application of these methods to material property prediction and new material discovery has been of high interest …

Rheological Investigations Of Latex-Surfactant-Associative Thickener Aqueous Systems, Bishop I. Hammack

Master's Theses

Surfactants and Thickeners are both additives used in fully-formulated waterborne coatings to provide colloidal stability, thickening, and other functionality. The behavior of each ingredient in a coating must be understood and controlled to maintain colloidal stability as well as balance other desired properties of the liquid coating and the dry paint film. In this work, quaternary systems of Water-Latex-Thickener-Surfactant were investigated to further the understanding of their behavior in coatings. The thickener used was a well characterized, hydrophobically-modified, ethoxylated urethane (HEUR) with two C18 terminal hydrophobes and 795 average repeat units of ethylene oxide as the hydrophilic spacer. Two latexes, …

Influence Of High Aspect Ratio Nanoparticle Filler Addition On Piezoelectric Nanocomposites, Jeremy A. Armas

Master's Theses

Piezoelectric nanogenerators (PNGs) are a new class of energy harvesting materials that show potential as a direct energy source for low powered electronics. Recently, piezoelectric polymers have been utilized for PNG technology due to low toxicity, high flexibility, and facile solution processing which provide manufacturing opportunities such as screen printing. Throughout the last decade, countless projects have focused on how to enhance the energy harvesting capabilities of these PNGs through the incorporation of nanoparticle fillers, which have been reported to enhance the piezoelectric properties of the film either directly through their intrinsic piezoelectric properties or through acting as surfaces for …

Preparation Of Supramolecular Amphiphilic Cyclodextrin Bilayer Vesicles For Pharmaceutical Applications, Kate E. Frischkorn

Master's Theses

Recent pharmaceutical developments have investigated using supramolecular nanoparticles in order to increase the bioavailability and solubility of drugs delivered in various methods. Modification of the carbohydrate cyclodextrin increases the ability to encapsulate hydrophobic pharmaceutical molecules by forming a carrier with a hydrophobic core and hydrophilic exterior. Guest molecules are commonly added to these inclusion complexes in order to add stability and further increase targeting abilities of the carriers. One such guest molecule is adamantine combined with a poly(ethylene glycol) chain. Vesicles are formed by hydrating a thin film of amphiphilic cyclodextrin and guest molecules in buffer solution that mimics physiological …

Multi-Scale Assembly Methodologies Of Poly(3-Hexylthiophene) Derivative Systems For Enhanced Optoelectronic Anisotropy, David William Bilger

Master's Theses

Conjugated polymers represent a class of semi-conducting materials with numerous applications in optoelectronic devices, including organic light-emitting diodes, field-effect transistors, and photovoltaics. Because of the numerous advantages of macromolecular systems, including solution processing and mechanical flexibility, conjugated polymers have become a burgeoning field of research with the hopes of producing cost-effective solution-based electronics. Importantly, optoelectronic device performance is heavily influenced by conjugated polymer backbone orientation and overall thin film morphology. As such, the processing conditions of these systems are important to the construction of high- performance optoelectronics. Polythiophenes are model conjugated polymers that have been studied extensively in halogenated organic …

A Comparison Study Of Two Synthesis Methods For Polymer Of Intrinsic Microporosity 1 (Pim-1), Conor S. Perry

Materials Engineering

Polymers of Intrinsic Microporosity (PIMs) are an emerging polymeric material class for molecular sieving applications. This study focuses on PIM-1, an alternating copolymer of 5,5’,6,6’-tetrahydroxy-3,3’,3,3’-tetramethyl-1,1’-spirobisindane and tetrafluoroterephthalonitrile synthesized via nucleophilic aromatic substitution. PIM-1 been widely studied as a gas separating material and filtering membrane, but in this case, it is studied as a battery separator material. PIM-1’s microporous (pore diameters less than 2 nm) structure allows smaller favorable ions to transport while preventing larger ions and compounds from transporting. Two synthesis methods, round bottom flask synthesis and ball mill synthesis, of PIM-1 are compared to see any improved characteristics. The …

Characterization Of Aquarefined Micro/Nanoporous Lead Material, Liam S. Russell, June Y. Suh

Materials Engineering

The process of aquarefining is an environmentally-friendly method for producing pure lead products that exhibit particularly low density. To observe the microstructures of these low-density forms of lead, scanning electron microscopy (SEM) was employed to examine aquarefined lead samples produced under three batches of processing conditions. Due to aquarefined lead's tendency to collapse under its own weight, careful measures were taken during transport and handling to avoid damaging the samples. Three types of microstructures were observed and correlated to changes in processing conditions: octahedron crystallites, microscales, and dendrites. Energy-dispersive x-ray spectrometry (EDS) was used to quantify the amount of oxygen …

Development Of A Humidity-Resistant Coating To Impart High Oxygen Barrier Performance To Food Packaging Films, Ryan Yinghua Cox

Master's Theses

Oxygen barrier coatings have the potential to greatly extend the lifetime of certain food products by incorporating them into existing food packaging. Present technologies face definite challenges of maintaining high performance, while attaining simple and inexpensive preparation methods. The oxygen barrier effect obtained with these coatings is also susceptible to a plasticization effect when exposed to high humidity, since water vapor molecules are readily soluble in typically hydrophilic resins. In this work, we demonstrate a 1 – 2 micron thick oxygen barrier coating, prepared on a 12 micron poly(ethylene terephthalate) substrate, that has oxygen transmission rates as low as 1.44 …

A Comparison Of Solvent And Water-Borne Alkyd Coatings And The History Of Voc Regulations In The United States, Molly Elise Burns

Master's Theses

A Comparison of Solvent and Water-Borne Alkyd Coatings Abstract

Conventional solvent based alkyd coatings have gone out of favor due to concerns over volatile organic compound (VOC) content. However, due to recent focus on renewable raw materials, alkyds are making a comeback in waterborne form. Water based alkyd coatings are known to have poor shelf stability and corrosion resistance, as well as other problems during the formulation process. This project focused on comparing solvent borne to two types of water-borne alkyds, water reducible alkyds and alkyds emulsions. The purpose was to understand the differences between the three types of alkyds …

Metals Additive Manufacturing Powder Aging Characterization, Thomas Russell Lovejoy, Nicholas Karl Muetterties, David Takeo Otsu

Mechanical Engineering

The metallic additive manufacturing process known as selective laser melting requires highly spherical, normally distributed powder with diameters in the range of 10 to 50 microns. Previous observations have shown a degradation in powder quality over time, resulting in unwanted characteristics in the final printed parts. 21-6-9 stainless steel powder was used to fabricate test parts, with leftover powder recycled back into the machine. Powder samples and test specimens were characterized to observe changes across build cycles. Few changes were observed in the physical and mechanical properties of the specimens, however, there were indications of chemical changes across cycles. Potential …

An Investigation Into The Use Of Polymer Bound Boronic Acid For Glucose Detection In Paper Based Microfluidic Devices, Spencer A. Schultz

Master's Theses

Paper Based Microfluidic Devices (microPADs) are a new platform for point-of-care diagnostic assays for use in resource-limited settings. These devices rely typically on enzymatic assays to produce their results, which makes them susceptible to degradation when exposed to extreme environmental conditions such as high temperature. In order to overcome this limitation, this research project focused on investigating the use of polymers instead of enzymes to detect analytes on microPADs.

Polymer-bound boronic acid, a glucose and pH sensitive polymer, was incorporated into microPADs in order to develop a chronometric, paper-based glucose assay. The polymer was tested with both lateral and vertical …

Development And Characterization Of Reagent Pencils For Microfluidic Paper Based Analytical Devices, Cheyenne H. Liu

Master's Theses

Microfluidic paper based analytical devices (microPADs) are a novel platform for point of care (POC) diagnostics. Limitations of reagent shelf life have been overcome with the introduction of reagent pencils as a method for solid-based reagent deposition. While useful, little work has been reported on the characterization and optimization of reagent pencils. Herein, an investigation on reagent pencil composition and efficiency is conducted via colorimetric release profile tests utilizing an erioglaucine disodium salt that yields a quantifiable blue colored product in the presence of water. Within this work, an investigation on the molecular weight dependence, polymer chain end functionality, and …

Toward High Performance Nanocarbon Fibers, Michaela R. Pfau

Master's Theses

High performance carbon fibers (CFs) have been a commercially available since their commercial boom in the 1970s, and are generally produced via carbonization of poly (acrylonitrile) (PAN). More recently, carbon nanomaterials like graphene and carbon nanotubes (CNTs) have been discovered and have shown excellent mechanical, thermal, and electrical properties due to their sp² carbon repeating structure. Graphene and CNTs can both be organized into macroscopic fibers using a number of different techniques, resulting in fibers with promising mechanical performance that can be readily multifunctionalized. In some cases, the two materials have been combined, and the resulting hybrid fibers have …

Syneresis And Rheology Mechanisms Of A Latex-Heur Associative Thickener System, Travis Bruno Smith

Master's Theses

Rheology modifiers are used in paints and coatings to ease their application to a surface, prevent sagging once applied, and allow the leveling of brushstrokes, among other benefits. The early rheology modifiers were hydroxyethyl celluloses (HECs), a type of non-associative thickener that is relatively inexpensive and synthesized from cellulose, which is abundant. However, coatings that are modified with HECs tend to suffer from poor leveling and syneresis (phase separation). HECs have since been replaced with associative thickeners (ATs). These thickeners, when properly formulated, produce stable dispersions that have improved rheological properties, yet, unlike HECs, are sensitive to changes to the …

Production And Harvest Of Microalgae In Wastewater Raceways With Resource Recycling, Alexander Colin Roberts

Master's Theses

Microalgae can be grown on municipal wastewater media to both treat the wastewater and produce feedstock for algae biofuel production. However the reliability of treatment must be demonstrated, as well as high areal algae productivity on recycled wastewater media and efficient sedimentation harvesting. This processes was studied at pilot scale in the present research.

A pilot facility was operated with nine CO₂-supplemented raceway ponds, each with a 33-m² surface area and a 0.3-m depth, continuously from March 6, 2013 through September 24, 2014. The ponds were operated as three sets of triplicates with two sets continuously fed …

Revision-Polyurethane-Graphene Nanocomposites For Corrosion-Resistant Coatings, Alexandra Rose Stevenson

Master's Theses

Corrosion is a prevalent concern throughout the world, causing significant monetary and safety concerns. Research has been dedicated to developing cost-effective solutions for corrosion that will also meet increasingly stringent environmental regulations. The recently discovered nanomaterial graphene has been proposed as a potential component in anticorrosion technology due to its strong air and water barrier properties. However, graphene is a relatively expensive, difficult to synthesize material. By incorporating it into nanocomposites, its properties can be exploited even at low concentrations. Previous work has been conducted involving the preparation of anticorrosive polystyrene-graphene nanocomposites; these materials were found to be effective long-term …

Composition Effects On Sheen And Spread Rate Of An Interior Flat, One Coat Latex Paint Formulation, Dana James Christensen Ii

Master's Theses

Interior flat, white latex paint is a common coating applied to walls around the world. Development of a coating with one coat hide capability is a pinnacle achievement for paint formulators as it has the potential to save consumers both time and money. One coat paints already exist on the market, but they are limited in color, coverage, and often have many disclaimers. Work done was part of a project initiated by ChemoursTM Titanium Technologies.

The goal of the project presented in this article was to create an interior flat, white latex paint that yields a spread rate of greater …