Physical Sciences and Mathematics Commons^™

Simulated Effects Of Varied Landscape-Scale Fuel Treatments On Carbon Dynamics And Fire Behavior In The Klamath Mountains Of California, Kevin J. Osborne

Master's Theses

I utilized forest growth model (FVS-FFE) and fire simulation software (FlamMap, Randig), integrated through GIS software (ArcMap9.3), to quantify the impacts varied landscape-scale fuel treatments have on short-term onsite carbon loss, long-term onsite carbon storage, burn probability, conditional flame length, and mean fire size. Thirteen fuel treatment scenarios were simulated on a 42,000 hectare landscape in northern California: one untreated, three proposed by the US Forest Service, and nine that were spatially-optimized and developed with the Treatment Optimization Model in FlamMap. The nine scenarios developed in FlamMap varied by treatment intensity (10%, 20%, and 30% of the landscape treated) and …

Adhesion And Durability Of Coatings On Polypropylene Exterior Sidings, Logan Riekio Stark

Master's Theses

Plastics have become a universal material for use in a myriad of commercial and consumer products. One such product, exterior siding, is the focus of this project. Although siding products were originally made from wood, vinyl siding, which offered superior performance, was introduced in the 1950’s. More recently, polypropylene (PP) siding has been introduced; PP provides a stronger product, which allows for deeper patterns and better edge detailing. PP siding, compared to traditional wood siding, doesn’t warp, crack, or degrade as easily with extended exposure to the elements, and is cheaper to maintain. However, even plastic siding must be coated. …

Quantification Of Nitrate Sources And Sinks Using A Water Quality Network In Morro Bay Estuary, California, Johanna Nadia Jean Weston

Master's Theses

Using an instrumented water quality network in Morro Bay Estuary, California from 2007 to 2010 (15 min sampling frequency), this study addressed the two objectives of constructing a nitrate budget and assessing the influence of sampling frequency on water quality parameters. These two objectives led to the submission of an original report of research (Appendix A) and a note (Appendix B) to peer-reviewed journals.

The first objective was to characterize the high spatial and temporal variation in physical parameters and nitrate concentrations and to construct a nitrate budget quantifying sources and sinks of nitrate from the ocean, streams, and groundwater, …

Effects Of High-Density, Short-Duration Planned Livestock Grazing On Soil Carbon Sequestration Potentials In A Coastal California Mixed Grassland, Kristina Michelle Wolf, Marc Horney, Brent Hallock, Robert T. Rutherford, Anthony T. O'Geen, Royce Larsen, William Plummer

Master's Theses

Planned grazing management in rangelands may improve carbon sequestration potential of soils by increasing plant biomass and the rate of nutrient cycling, which might mitigate global warming. The effects of high-intensity, short-duration planned grazing of sheep on several soil and ecosystem properties were investigated on a mixed grassland in San Luis Obispo, CA. The objectives of this study were to (a) identify soil properties related to soil C sequestration in rangelands; (b) determine if planned grazing improved soil carbon sequestration; (c) quantify changes in identified variables in grazed and rested plots; and (d) analyze any changes in plant species composition …

Effect Of Au Content On Microstructural Evolution Of Snagcu Solder Joints That Undergo Isothermal Aging And Reliability Testing, Patrick J. Hyland

Master's Theses

Electronics, especially, printed circuit boards (PCBs) are a widespread technology. Metal coatings or “surface finishes” are often added to PCB board pads and component leads during manufacturing to improve their performance. Electroplated nickel/gold over copper is a popular surface finish for printed circuit boards and component leads. The presence of gold in solder joints, however, is known to have detrimental effects referred to as gold embrittlement. It is generally understood that tin-lead solder joints with less than 3 weight percent (wt%) of gold will not experience reliability issues. The acceptable level of gold in lead-free solder joints, however, is less …

Synthesis And Characterization Of Linear And Branched Polylactic Acid For Use In Food Packaging Applications, Kyle C. Bentz

Master's Theses

Polylactic acid (PLA) resins of various molecular weights and molecular weight distributions were synthesized. Linear, narrow molecular weight distribution (MWD) PLA resins were synthesized, as well as resins containing both high molecular weight branched structures and low molecular weight chains and oligomers. Narrow MWD resins were synthesized for use as adhesives for corrugated paperboard and broad MWD resins were synthesized for use as a waterborne coating. PLA resins were dispersed for use as a waterborne coating. Success has been made at forming films utilizing various plasticizers and surfactants as well as polyvinyl alcohol as dispersing agents. A cold dispersion procedure …

Onboard Video Stabilization For Unmanned Air Vehicles, Nicholas Stewart Cross

Master's Theses

Unmanned Air Vehicles (UAVs) enable the observation of hazardous areas without endangering a pilot. Observational capabilities are provided by on-board video cameras and images are relayed to remote operators for analysis. However, vibration and wind cause video camera mounts to move and can introduce unintended motion that makes video analysis more difficult. Video stabilization is a process that attempts to remove unwanted movement from a video input to provide a clearer picture.

This thesis presents an onboard video stabilization solution that removes high-frequency jitter, displays output at 20 frames per second (FPS), and runs on a Blackfin embedded processor. Any …

Development And Extrapolation Of An Undergraduate Laboratory Experiment To An Elastomeric Spinal Muscular Atrophy Brace, Richard Sterling Brose

Master's Theses

Ever since the advent of polymer science, polyurethanes have played a huge role in the industrial world. They have been used in endless applications from furniture padding to aircraft coatings, to binders for insensitive munitions. It is therefore important that the chemistry of polyurethanes is well understood as well as the ability to draw relationships between the raw materials selected and the end-use properties of the polymer. Because of the multitude of practical applications, the development of an undergraduate polymer chemistry laboratory focused on polyurethane elastomers is developed and described herein. Polymer chemistry students are exposed to hydroxyterminated polybutadiene (HTPB) …

Developing Digital Field Guides For Plants: A Study From The Perspective Of Users, Emily Roseanne Schwarz

Master's Theses

A field guide is a tool to identify an object of natural history. Field guides
cover a wide range of topics from plants to fungi, birds to mammals, and shells to minerals. Traditionally, field guides are books, usually small enough to be carried outdoors . They enjoy wide popularity in modern life; almost every American home and library owns at least one field guide, and the same is also true for other areas of the world.

At this time, companies, non-profits, and universities are developing computer
technologies to replace printed field guides for identifying plants. This thesis
examines the state …

Development Of A Cubesat Instrument For Microgravity Particle Damper Performance Analysis, John Trevor Abel

Master's Theses

Spacecraft pointing accuracy and structural longevity requirements often necessitate auxiliary vibration dissipation mechanisms. However, temperature sensitivity and material degradation limit the effectiveness of traditional damping techniques in space. Robust particle damping technology offers a potential solution, driving the need for microgravity characterization. A 1U cubesat satellite presents a low cost, low risk platform for the acquisition of data needed for this evaluation, but severely restricts available mass, volume, power and bandwidth resources. This paper details the development of an instrument subject to these constraints that is capable of capturing high resolution frequency response measurements of highly nonlinear particle damper dynamics.

A Study Of Semi-Automated Tracing, Jeffrey Holden

Master's Theses

Requirements tracing is crucial for software engineering practices including change analysis, regression testing, and reverse engineering. The requirements tracing process produces a requirements traceability matrix(TM) which links high- and low-level document elements. Manually generating a TM is laborious, time consuming, and error-prone. Due to these challenges TMs are often neglected. Automated information retrieval(IR) techniques are used with some efficiency. However, in mission- or safety-critical systems a human analyst is required to vet the candidate TM. This introduces semi-automated requirements tracing, where IR methods present a candidate TM and a human analyst validates it, producing a final TM. In semi-automated tracing …

Go Farm, Goleta: Urban Agriculture Protection For Eastern Goleta Valley, Eli M. Krispi

Master's Theses

This paper explores two potential land use planning strategies that can be used to preserve and enhance the economic viability of agricultural operations surrounded by suburban development in Santa Barbara County’s Eastern Goleta Valley: buffers between agriculture and other land uses, and agritourism. In the case of buffers, academic literature is examined to determine how effective buffers are at various tasks (filtering runoff, mitigating dust and wind, providing habitat, etc.) and how to construct buffers to maximize their effectiveness. Land use plans and codes from several California jurisdictions are studied to see how buffers are put to use. Academic literature …

The Preparation Of Functional Surfaces, Philip Thomas Dirlam

Master's Theses

Diels-Alder chemistry was utilized to manipulate the surface energy of glass substrates in reversible manner. Glass slides and capillaries were functionalized with hydrophobic dieneophiles resulting in a non-wetting surface. A retro Diels-Alder reaction facilitated by the thermal treatment of the surface’s function to cleave the hydrophobic dieneophile and resulted in the fabrication of a hydrophilic surface. Contact angle (CA) measurements were used as preliminary measurements for monitoring the changes in surface energy exhibited during the initial hydrophobic state (CA - 70±3°), after attachment of the dieneophile creating a hydrophobic state (CA - 101±9°) followed by reestablishment of the hydrophilic state …

Point-Based Color Bleeding With Volumes, Christopher J. Gibson

Master's Theses

The interaction of light in our world is immensely complex, but with mod-

ern computers and advanced rendering algorithms, we are beginning to reach

the point where photo-realistic renders are truly difficult to separate from real

photographs. Achieving realistic or believable global illumination in scenes with

participating media is exponentially more expensive compared to our traditional

polygonal methods. Light interacts with the particles of a volume, creating com-

plex radiance patterns.

In this thesis, we introduce an extension to the commonly used point-based

color bleeding (PCB) technique, implementing volume scatter contributions. With

the addition of this PCB algorithm extension, we …

Part A: The Use Of Nonionic Associative Polymers For The Thickening And Emulsifying Of Personal Care Products/ Part B: The Synthesis Of A Manganese Sod Mimetic For Reactive Coatings, Mallory Lynn Mcmahon

Master's Theses

Part A

The use of nonionic associative thickeners was proposed for personal care applications. Various limitations of current rheology modifiers used in personal care were discussed. Nonionic associative polymers were examined as both thickeners and emulsifiers. The structure/property relationship for nonionic polymers and their ability to thicken and emulsify were fully examined. Results showed an increase in thickening efficiency for nonionic associative polymers with higher log(P) (partition coefficient) values. This was due to the formation of smaller aggregates and increased bridging between aggregates. The connection between oil polarity, log(P) of the associative polymer, and emulsion stability showed no relationship however; …

Evaluation Of Stain Blocking Primer Coatings With Low Volatile Organic Compound (Voc) Content And Effects Of Drying Conditions On The Properties Of Water Reducible Coatings For Polypropylene, Megan Alexandra Hart

Master's Theses

The California Air Resources Board (CARB) plans to reduce the volatile organic compound (VOC) limit of specialty primers, sealers, and undercoaters (SPSU), also referred to as stain blocking primers, from 350 g/L to 100 g/L in January of 2012. These coatings are primarily used as stain blocking primers over a variety of substrates, such as wood and drywall. Currently the stain blocking primers that are considered most effective are solvent based primers that contain VOC levels much higher than 100 g/L. The goal of this study is to determine if primers on the market today with a VOC content of …

Probabilistic Fault Displacement Hazard Analysis For Reverse Faults And Surface Rupture Scale Invariance, Zachary E. Ross

Master's Theses

p.p1 {margin: 0.0px 0.0px 0.0px 0.0px; font: 12.0px 'Times New Roman'}

A methodology is presented for evaluating the potential surface fault displacement on reverse faults in a probabilistic manner. This methodology follows the procedures put forth for Probabilistic Fault Displacement Hazard Analysis (PFDHA). Empirical probability distributions that are central to performing a PFDHA are derived from field investigations of reverse faulting events. Statistical analyses are used to test previously assumed properties of scale invariance with respect to magnitude for normalized displacement. It is found that normalized displacement is statistically invariant with respect to magnitude and focal mechanism, allowing for the …

Utilization Of Geographic Information System For Research, Management, And Education In The Natural Resources Management Department At California Polytechnic State University, San Luis Obispo, David In Yun

Master's Theses

Geographic Information System (GIS) is “an organized collection of computer hardware, software, geographic data, and personnel designed to efficiently capture, store, update, manipulate, analyze, and display all forms of geographically referenced information” (ESRI, 1997a). The Natural Resources Management Department at California Polytechnic State University, San Luis Obispo, California, hereafter NRM, was one of the early users of GIS technology. Although GIS was primarily used as an educational tool, it was also used for cataloging and displaying resource information for management planning and research projects. As the computing technology advanced, GIS became more powerful and easier to use. NRM faculty and …

Supporting Introductory Test-Driven Labs With Webide, Thomas C. Dvornik

Master's Theses

WebIDE is a new web-based development environment for entry-level programmers with two primary goals: minimize tool barriers to writing computer programs and introduce software engineering best practices early in a student's educational career. Currently, WebIDE focuses on Test-Driven Learning (TDL) by using small iterative examples and introducing lock-step labs, which prevent the student from moving forward until they finish the current step. An initial set of labs and evaluators were created as examples of how to use WebIDE and were used in a pilot study in a CS0 course where students were split into two groups, one that used WebIDE …