Physical Sciences and Mathematics Commons^™

Precise Determination Of Charge Distributions In Electron Irradiated Polymers Via Pulsed Electroacoustic Measurements With Applications To Spacecraft Charging, Zachary Gibson

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Understanding how charge builds up and moves around in materials that are highly insulating, such as dielectrics, is important for many applications from power transmission to spacecraft charging. The leading cause of issues in spacecraft due to interactions with the space environment is spacecraft charging. That is, the accumulation of charge on insulating materials leads to arcing and sparking aboard the spacecraft. The most critical charging occurs due to electrons in a particular energy range of 10-50 keV. Electrons with these energies can travel 1’s to 10’s of microns into relevant materials. To measure where the charge is embedded and …

Polymeric Impulsive Actuation Mechanisms: Development, Characterization, And Modeling, Yongjin Kim

Doctoral Dissertations

Recent advances in the field of biomedical and life-sciences are increasingly demanding more life-like actuation with higher degrees of freedom in motion at small scales. Many researchers have developed various solutions to satisfy these emerging requirements. In many cases, new solutions are made possible with the development of novel polymeric actuators. Advances in polymeric actuation not only addressed problems concerning low degree of freedom in motion, large system size, and bio-incompatibility associated with conventional actuators, but also led to the discovery of novel applications, which were previously unattainable with conventional engineered systems. This dissertation focuses on developing novel actuation mechanisms …

The Solvation Energy Of Ions In A Stockmayer Fluid, Cameron John Shock

Dissertations, Master's Theses and Master's Reports

The solvation of ions in polar solvents has been a long studied system since the early twentieth century. A common technique to calculate the energy associated with ion solvation is the Born Solvation energy equation. This equation assumes an ion is placed in an incompressible, homogeneous dielectric, which is not necessarily representative of a real system. In this work the Stockmayer Fluid Model is used in a molecular dynamics simulation through the software LAMMPS to check the quantitative correctness of the Born equation. It is also shown how solvation energies of ions placed in polymerized and non-polymerized solvents differ. It …

Characterization Of Polymers Containing Ferrocene And Imidazole With Density Functional Theory, Eric Mullins

Electronic Theses & Dissertations

Electrochemical and UV-Vis studies on these polymers in the presence of aqueous solutions containing metal ions have revealed significant modifications in the electrochemical properties and absorption spectra. These modifications in electrochemical properties could be attributed to the ability of the imidazole to coordinate with metal ions, increasing its electron deficiency and enhancing oxidization of the nearby ferrocene moiety if it is in close proximity with imidazole. However, the mechanism of interaction between the imidazole and metal ions, as well as the equilibrium geometry of the resulting polymer-metal ion complex is unknown.

In this thesis, density functional theory (DFT) was used …

The Effect Of Composition And Architecture On Polymer Behavior In Homopolymer Blends And Inter-Filament Bonding In 3d Printed Models, Edward Roy Duranty

Doctoral Dissertations

This dissertation presents work that increases our understanding of the effects of composition and architecture on copolymer structure and dynamics and how they affect material diffusion between filaments in a 3D printed model. Copolymers are polymer chains made up of at least two different monomers. The ordering and arrangement of the two monomer species within a copolymer can have drastic effects on the behavior and properties of the copolymer.

The first chapter of this dissertation examines how the copolymer composition affects the structure and dynamics of the chain in a homopolymer blend. This study used a modified Monte Carlo BFM …

Deposition And Characterization Of Carbon Nanotubes (Cnts) Based Films For Sensing Applications, Amila C. Dissanayake

Dissertations

The advent of carbon nanotubes (CNTs) has opened up lot of novel applications because of their unique electrical and mechanical properties. CNTs are well known material for its exceptional electrical, mechanical, optical, thermal and chemical properties. A single-wall nanotube (SWNT) can be either semiconducting, metallic or semi-metallic, based on its chirality and diameter. SWNTs can be used in transistor device as active channels due to high electron mobility (~10000 cm2/(V s), electrical interconnects, nano-scale circuits, field-emission displays, light-emitting devices and thermal heat sinks due to low resistivity, high current density (~109A cm-2) and high thermal conductivity (~3500 W m-1). Further, …

Development, Validation, And Application Of Analytical Methods For Characterizing Adsorbed Protein Orientation, Conformation, And Bioactivity, Aby Thyparambil

All Dissertations

The structure and bioactivity of adsorbed proteins are tightly interrelated and play a key role in their interaction with the surrounding environment. These factors are of critical importance in many biotechnological applications. However, because the bioactive state of an adsorbed protein is a function of the orientation, conformation, and accessibility of its bioactive site(s), the isolated determination of just one or two of these factors will typically not be sufficient to understand the structure-function relationships of the adsorbed layer. Rather a combination of methods is needed to address each of these factors in a synergistic manner to provide a complementary …

Multi-Mode And Single Mode Polymer Waveguides And Structures For Short-Haul Optical Interconnects, Kevin L. Kruse

Dissertations, Master's Theses and Master's Reports - Open

Single mode and multi-mode polymer optical waveguides are a viable solution for replacing copper interconnects as high speed and large bandwidth short-haul optical interconnects in next-generation supercomputers and data servers. A precision laser direct writing method is implemented for producing various single mode and multi-mode polymer waveguide structures and their performance is evaluated experimentally showing agreement with theoretically developed models. The laser direct writing method is the optimal solution for low-rate cost-effective prototyping and large area panel production.

A single mode polymer waveguide bridge module for silicon to glass optical fibers is designed, modeled, fabricated, and measured. The bridge module …

Nano And Nanostructured Materials For Optical Applications, Panit Chantharasupawong

Electronic Theses and Dissertations

Nano and nanostructured materials offer unique physical and chemical properties that differ considerably from their bulk counterparts. For decades, due to their fascinating properties, they have been extensively explored and found to be beneficial in numerous applications. These materials are key components in many cutting-edge optic and photonic technologies, including photovoltaics, waveguides and sensors. In this dissertation, the uses of nano and nanostructured materials for optical applications are investigated in the context of optical limiting, three dimensional displays, and optical sensing. Nanomaterials with nonlinear optical responses are promising candidates for self-activating optical limiters. In the first part of this study, …

Hi-Fidelity Simulation Of The Self-Assembly And Dynamics Of Colloids And Polymeric Solutions With Long Range Interactions, Mahdy Malekzadeh Moghani

Doctoral Dissertations

Modeling the equilibrium properties and dynamic response of the colloidal and polymeric solutions provides valuable insight into numerous biological and industrial processes and facilitates development of novel technologies. To this end, the centerpiece of this research is to incorporate the long range electrostatic or hydrodynamic interactions via computationally efficient algorithms and to investigate the effect of these interactions on the self-assembly of colloidal particles and dynamic properties of polymeric solutions. Specifically, self-assembly of a new class of materials, namely bipolar Janus nano-particles, is investigated via molecular dynamic simulation in order to establish the relationship between individual particle characteristics, such as …

Composition Dependence Of The Flory-Huggins Interaction Parameter In Polymer Blends: Structural And Thermodynamic Calculations, Travis H. Russell

Doctoral Dissertations

Flory-Huggins Theory has been the basis for understanding polymer solvent and blended polymer thermodynamics for much of the last 60 years. Within this theory, a parameter (χ) [chi] was included to quantify the enthalpic energy of dispersion between distinct components. Thin film self-assembly of polymer melts and block copolymers depends critically on this parameter, and in application, χ has generally been assumed to be independent of the concentrations of the individual components of the system. However, Small-Angle Neutron Scattering data on isotopic polymer blends, such as polyethylene and deuterated polyethylene, have shown a roughly parabolic concentration dependency for …

Probing And Controlling Fluid Rheology At Microscale With Magnetic Nanorods, Alexander Tokarev

All Dissertations

This Dissertation is focused on the development of new methods for characterization and control of fluid rheology using magnetic nanorods. This Dissertation consists of five chapters. In the first chapter, we review current microrheologial methods and develop a Magnetic Rotational Spectroscopy (MRS) model describing nanorod response to a rotating magnetic field. Using numerical modeling, we analyze the effects of materials parameters of nanorods and fluids on the MRS characteristic features. The model is designed for a specific experimental protocol. We introduce and examine physical parameters which can be measured experimentally. The model allows identification of MRS features enabling the calculation …

Production And Characterization Of Electrospan Polymer Nano-Fibers, Anna Sise

Honors Theses

Electrospinning is a process of generating polymer fibers by accelerating a polymer solution through an electric field. The polymer solution is released at a designated rate through a syringe; once the droplet enters the high voltage region, it whips throughout the chamber, landing upon a grounded collector. This procedure results in fibers with a range of diameter from several nanometers to a few micrometers. These fibers can be used in a variety of applications, including drug delivery, filter media, material substrates, optical media, tissue scaffolds, and wound dressing. For my senior thesis, I established the most successful method of creating …

Multipolymer Interactions In Bulk Heterojunction Photovoltaic Devices, Grant Olson

Physics

Multipolymer photovoltaics, single layer devices made up of multiple photoactive polymers, can create organic photovoltaics (OPVs) with a wider spectral response than single polymer systems without the difficult fabrication of a tandem. Our group has successfully created multipolymer solar devices with 2% power conversion efficiency. We have analyzed the optical and electrical properties of these devices, and found that it may be possible for polymers to assist each other with charge extraction, though combining polymers disrupts single polymer crystallinity.

Structure And Strength: Anisotropic Polyvinyl Alcohol Hydrogels And Spider Mite Silk Fibres, Stephen Hudson

Electronic Thesis and Dissertation Repository

Polyvinyl alcohol (PVA) is a hydrophilic, biocompatible polymer which can be made into physically cross-linked hydrogels by freezing and thawing PVA solution. These hydrogels can be made with anisotropic mechanical properties closely matching those of porcine aorta, making them a promising material for producing artificial heart valves and heart valve stents.

Small- and ultra small-angle neutron scattering has been used to study the structure of isotropic and anisotropic PVA hydrogels at length-scales of 2 nm to 10 μm. By supplementing the neutron data with data from atomic force microscopy, a large range of length-scales have been probed, within which structural …

Liquid Crystal Materials And Tunable Devices For Optical Communications, Fang Du

Electronic Theses and Dissertations

In this dissertation, liquid crystal materials and devices are investigated in meeting the challenges for photonics and communications applications. The first part deals with polymer-stabilized liquid crystal (PSLC) materials and devices. Three polymer-stabilized liquid crystal systems are developed for optical communications. The second part reports the experimental investigation of a novel liquid-crystal-infiltrated photonic crystal fiber (PCF) and explores its applications in fiber-optic communications. The curing temperature is found to have significant effects on the PSLC performance. The electro-optic properties of nematic polymer network liquid crystal (PNLC) at different curing temperatures are investigated experimentally. At high curing temperature, a high contrast, …