Physical Sciences and Mathematics Commons^™

Proof-Of-Concept For Converging Beam Small Animal Irradiator, Benjamin Insley

Dissertations & Theses (Open Access)

The Monte Carlo particle simulator TOPAS, the multiphysics solver COMSOL., and

several analytical radiation transport methods were employed to perform an in-depth proof-ofconcept

for a high dose rate, high precision converging beam small animal irradiation platform.

In the first aim of this work, a novel carbon nanotube-based compact X-ray tube optimized for

high output and high directionality was designed and characterized. In the second aim, an

optimization algorithm was developed to customize a collimator geometry for this unique Xray

source to simultaneously maximize the irradiator’s intensity and precision. Then, a full

converging beam irradiator apparatus was fit with a multitude …

The Analysis Of Mechanical Exfoliation Of Graphene For Various Fabrication And Automation Techniques, Lance Yarbrough

Mechanical Engineering Undergraduate Honors Theses

Mechanical Exfoliation of Graphene is an often-overlooked portion of the fabrication of quantum devices, and to create more devices quickly, optimizing this process to generate better flakes is critical. In addition, it would be valuable to simulate test pulls quickly, to gain insight on flake quality of various materials and exfoliation conditions. Physical pulls of graphene at various temperatures, pull forces, and pull repetitions were analyzed and compared to the results of ANSYS simulations, solved for similar results. Using ANSYS’ ability to predict trends in exfoliations, flake thickness and coverage using stress and deflection analyses were investigated. Generally, both strongly …

The Time-Dependent Ionospheric Model Using A Tec-Driven Servo: An Investigation Of The Capabilities And Limitations, Jenny Rebecca Whiteley

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The ionosphere is a region of the atmosphere with a high density of electrons. These electrons affect the behavior of any electromagnetic wave that passes through the ionosphere. Communication and geolocation systems, such as traditional radio and Global Positioning Systems, depend on emitted electromagnetic signals being picked up by a receiver. The presence of the ionosphere affects the behavior of the signal and the quality of the service. Hence, the interactions between electromagnetic waves and the ionosphere provide a major motivation to understand, research, and successfully model and predict the ionosphere and its physical phenomena. This study focused on determining …

Numerical Design And Optimization Of Near-Infrared Band- Pass Filter, Hafiza Syeeda Faiza, Ghazi Aman Nowsherwan, Basem A. Abu Izneid, Muhammad Azhar, Saira Riaz, Syed Sajjad Hussain, Saira Ikram, Mohsin Khan, Shahzad Naseem, Mohammad Kanan, Ibrahim M. Mansour

Applied Mathematics & Information Sciences

Band-pass filters functioning in the near-infrared (IR) range are desired for laser technology, multi-photon fluorescence, and IR imaging applications. In this study, we have designed four band-pass filters in the near Infrared spectrum (900-1200 nm) by vertically stacking different high and low-index materials. The band-pass filters are modelled by Essential Macleod software with different thicknesses. The layer’s thicknesses were optimized in such a way to provide the negligible reflectance and maximum transmission on the front side. All the simulated band-pass filters exhibit high transmittance, but TiO2/Al2O3 and Ta2O5/Al2O3 outperforms other modelled structure in terms of performance due to the better …

A Monte-Carlo Simulation Of Gamma Rays In A Sodium Iodide Detector, Ben Kessler

Physics

Gamma rays principally interact with matter through Compton scattering, photoelectric effect, pair production, and triplet production. The focus of this simulation is to study the theoretical energy spectrum created by gamma rays from a Cesium-137 source, which produces gamma photons with an energy of 0.662 MeV. At this energy level, most interactions are results of Compton scatters and the photoelectric effect. Therefore, this simulation only models those two effects on gamma rays. Using Monte Carlo methods and the Metropolis algorithm to sample the probability distributions of the two effects allowed for the simulation of gamma rays in a Sodium Iodide …

Diffusion-Driven Aggregation Of Particles In Quasi-2d Membranes, Oscar Gullickson Rausis

Physics

Many biological membranes can be modeled as two-dimensional (2D) viscous fluid sheets surrounded by three-dimensional (3D) fluids of different viscosity. Such membranes are dubbed quasi-2D as they exhibit properties of both 2D and 3D fluids. The Saffman length is a parameter that describes the energy exchange between the membrane and bulk fluids and controls the cross-over from 2D to 3D hydrodynamics. We aim to model diffusion-driven aggregation of particles embedded in a quasi-2D membrane. It is known that hydrodynamic interactions between solute particles significantly reduce their aggregation rate in 3D fluids. It is expected that in quasi-2D membranes the reduction …

Hydrodynamic And Physicochemical Interactions Between An Active Janus Particle And An Inactive Particle, Jessica S. Rosenberg

Dissertations, Theses, and Capstone Projects

Active matter is an area of soft matter science in which units consume energy and turn it into autonomous motion. Groups of these units – whether flocks of birds, bacterial colonies, or even collections of synthetically-made active particles – may exhibit complex behavior on large scales. While the large-scale picture is of great importance, so is the microscopic scale. Studying the individual particles that make up active matter will allow us to understand how they move, and whether and under what circumstances their activity can be controlled.

Here we delve into the world of active matter by studying colloidal-sized (100 …

Modeling, Simulation And Control Of Microrobots For The Microfactory., Zhong Yang

Electronic Theses and Dissertations

Future assembly technologies will involve higher levels of automation in order to satisfy increased microscale or nanoscale precision requirements. Traditionally, assembly using a top-down robotic approach has been well-studied and applied to the microelectronics and MEMS industries, but less so in nanotechnology. With the boom of nanotechnology since the 1990s, newly designed products with new materials, coatings, and nanoparticles are gradually entering everyone’s lives, while the industry has grown into a billion-dollar volume worldwide. Traditionally, nanotechnology products are assembled using bottom-up methods, such as self-assembly, rather than top-down robotic assembly. This is due to considerations of volume handling of large …

Quantum Computing And Its Applications In Healthcare, Vu Giang

OUR Journal: ODU Undergraduate Research Journal

This paper serves as a review of the state of quantum computing and its application in healthcare. The various avenues for how quantum computing can be applied to healthcare is discussed here along with the conversation about the limitations of the technology. With more and more efforts put into the development of these computers, its future is promising with the endeavors of furthering healthcare and various other industries.

Long-Range Aceo Phenomena In Microfluidic Channel, Diganta Dutta, Keifer Smith, Xavier Palmer

Electrical & Computer Engineering Faculty Publications

Microfluidic devices are increasingly utilized in numerous industries, including that of medicine, for their abilities to pump and mix fluid at a microscale. Within these devices, microchannels paired with microelectrodes enable the mixing and transportation of ionized fluid. The ionization process charges the microchannel and manipulates the fluid with an electric field. Although complex in operation at the microscale, microchannels within microfluidic devices are easy to produce and economical. This paper uses simulations to convey helpful insights into the analysis of electrokinetic microfluidic device phenomena. The simulations in this paper use the Navier–Stokes and Poisson Nernst–Planck equations solved using COMSOL …

Quantum Efficiency Enhancement In Simulated Nanostructured Negative Electron Affinity Gaas Photocathodes, Md Aziz Ar Rahman, Shukui Zhang, Hani E. Elsayed-Ali

Physics Faculty Publications

Nanostructured negative electron affinity GaAs photocathodes for a polarized electron source are studied using finite difference time domain optical simulation. The structures studied are nanosquare columns, truncated nanocones, and truncated nanopyramids. Mie-type resonances in the 700–800 nm waveband, suitable for generation of polarized electrons, are identified. At resonance wavelengths, the nanostructures can absorb up to 99% of the incident light. For nanosquare columns and truncated nanocones, the maximum quantum efficiency (QE) at 780 nm obtained from simulation is 27%, whereas for simulated nanopyramids, the QE is ∼21%. The high photocathode quantum efficiency is due to the shift of Mie resonance …

Investigation Of The Effect Of Corundum Layer On The Heat Transfer Of Sic Slab, Sri Elsa Fatmi, Donanta Dhaneswara, Muhammad Anis, Ahmad Ashari

Journal of Materials Exploration and Findings

Aluminum is the most widely used metal in industry. Aluminum smelting is one of the important steps that needs to be carried out to produce products made of aluminum metal with good quality. In the process of smelting aluminum there are several problems that occur, one of which is the growth of corundum in Si C refractories which affects the quality of aluminum melt and the durability of Si C refractories. This research was conducted to see the heat transfer in Si C and the effect of the presence of Corundum on heat transfer. This research was carried out by …

Core-Collapse Supernova Simulations With Spectral Two-Moment Neutrino Transport, Ran Chu

Doctoral Dissertations

The primary focus of this dissertation is to develop a next-generation, state-of-the-art neutrino kinetics capability that will be used in the context of the next-generation, state-of-the-art core-collapse supernova (CCSN) simulation frameworks \thornado\ and \FLASH.\index{CCSN} \thornado\ is a \textbf{t}oolkit for \textbf{h}igh-\textbf{or}der \textbf{n}eutrino-r\textbf{ad}iation hydr\textbf{o}dynamics, which is a collection of modules that can be incorporated into a simulation code/framework, such as \FLASH, together with a nuclear equation of state (EOS)\index{EOS} library, such as the \WeakLib\ EOS tables. The first part of this work extends the \WeakLib\ code to compute neutrino interaction rates from~\cite{Bruenn_1985} and produce corresponding opacity tables.\index{Bruenn 1985} The processes of emission, …

An Interactive Simulation And Visualization Tool For Conventional And Aberration-Corrected Transmission Electron Microscopy, Xingzhong Li

Nebraska Center for Materials and Nanoscience: Faculty Publications

Contrast transfer function (CTF) is a vital function in transmission electron microscopy (TEM). It expresses to what extent amplitudes converted from the phase changes of the diffracted waves contribute to the TEM image, including the effects of lens aberrations. Simulation is very helpful to understand the application of the function thoroughly. In this work, we develop the CTFscope as a component in the Landyne software suite, to calculate the CTF with temporal and spatial dumping envelopes for conventional TEM and to extend it to various aberrations (up to fifth order) for aberration-corrected (AC)- TEM. It also includes effects on the …

Resonant Energy Exchange In Ultracold Rydberg Atoms, Samantha Grubb, Alan Okinaka

Physics and Astronomy Summer Fellows

Ultracold Rydberg atoms serve as good systems in which resonant dipole-dipole interactions can be observed. The goal of our work is to design a simulation in which energy exchange among many nearly evenly spaced energy levels is observed. These observations are useful for understanding the time evolution of complicated quantum systems, and have applications in quantum computing and simulating. We are utilizing a supercomputer to run our simulation as well as studying the system experimentally. Once we obtain simulated results, we plan to compare them with the results obtained in a lab.

Waves And Oscillations In A Sunspot: Observations And Modeling Of Noaa Ar 12470, Yi Chai

Dissertations

Waves and oscillations are important solar phenomena not only because they can propagate and dissipate energy in the chromosphere, but also because they carry information about the structure of the atmosphere in which they propagate. Among these phenomena, the one of the most interesting ones occurs in the sunspot umbra. In this area, continuously propagating magnetohydrodynamic (MHD) waves generated from below the photosphere create the famous 3-minute sunspot umbral oscillations that affect the line profile of spectral lines due to temperature, density, and velocity changes of the plasma in the region. In the past decades, numerous observations and models have …

Tokamak 3d Heat Load Investigations Using An Integrated Simulation Framework, Thomas Looby

Doctoral Dissertations

Reactor class nuclear fusion tokamaks will be inherently complex. Thousands of interconnected systems that span orders of magnitude in physical scale must operate cohesively for the machine to function. Because these reactor class tokamaks are all in an early design stage, it is difficult to quantify exactly how each subsystem will act within the context of the greater systems. Therefore, to predict the engineering parameters necessary to design the machine, simulation frameworks that can model individual systems as well as the interfaced systems are necessary. This dissertation outlines a novel framework developed to couple otherwise disparate computational domains together into …

Modeling And Analysis Of Fractional Tb Model With Atangana-Baleanu Derivative, Aatif Ali, Saeed Islam, Quaid Iqbal, Huma Gul, Muhammad Nafees

International Journal of Emerging Multidisciplinaries: Mathematics

In recent years Atangana and Baleanu proposed a new fractional derivative with non-singular and non-local kernel, this paper formulate a fragmentary request numerical TB model with AtanganaBaleanu derivative (AB derivative). We figured the basic reproduction number ( R0 ) and assessment of boundary dependent on genuine information of Khyber Pakhtunkhwa Pakistan, Initially we present the fundamental properties of the model, the existence and uniqueness of the model is proved using fixed point theory. At last, the model is tackled mathematically through Adams-Bashforth Moulton technique. The mathematical results for the extended model of the elements of Tuberculosis is shown graphically to …

Applications Of A Combined Approach Of Kinetic Monte Carlo Simulations And Machine Learning To Model Atomic Layer Deposition (Ald) Of Metal Oxides, Emily Justus

MSU Graduate Theses

Metal-oxides such as ZnO or Al₂O₃ synthesized through Atomic Layer Deposition (ALD) have been of great research interest as the candidate materials for ultra-thin tunnel barriers. In this study, I have applied a 3D on-lattice Kinetic Monte Carlo (kMC) code developed by Timo Weckman’s group to simulate the growth mechanisms of the tunnel barrier layer and to evaluate the role of various experimentally relevant factors in the ALD processes. I have systematically studied the effect of parameters such as the chamber pressure temperature, pulse, and purge times. The database generated from the kMC simulations was subsequently used …

Deeply Learning Deep Inelastic Scattering Kinematics, Markus Diefenthaler, Abdullah Farhat, Andrii Verbytskyi, Yuesheng Xu

Mathematics & Statistics Faculty Publications

We study the use of deep learning techniques to reconstruct the kinematics of the neutral current deep inelastic scattering (DIS) process in electron–proton collisions. In particular, we use simulated data from the ZEUS experiment at the HERA accelerator facility, and train deep neural networks to reconstruct the kinematic variables Q² and x. Our approach is based on the information used in the classical construction methods, the measurements of the scattered lepton, and the hadronic final state in the detector, but is enhanced through correlations and patterns revealed with the simulated data sets. We show that, with the appropriate selection …

Bunch Length Measurements At The Cebaf Injector At 130 Kv, Sunil Pokharel, M. W. Bruker, J. M. Grames, A. S. Hofler, R. Kazimi, Geoffrey A. Krafft, S. Zhang

Physics Faculty Publications

In this work, we investigated the evolution in bunch length of beams through the CEBAF injector for low to high charge per bunch. Using the General Particle Tracer (GPT), we have simulated the beams through the beamline of the CEBAF injector and analyzed the beam to get the bunch lengths at the location of chopper. We performed these simulations with the existing injector using a 130 kV gun voltage. Finally, we describe measurements to validate these simulations. The measurements have been done using chopper scanning technique for two injector laser drive frequency modes: one with 500 MHz, and another with …

Cebaf Injector Model For KL Beam Conditions, Sunil Pokharel, Geoffrey A. Krafft, A. S. Hofler, R. Kazimi, M. Bruker, J. Grames, S. Zhang

Physics Faculty Publications

The Jefferson Lab KL experiment will run at the Continuous Electron Beam Accelerator Facility with a much lower bunch repetition rate (7.80 or 15.59 MHz) than nominally used (249.5 or 499 MHz). While the proposed average current of 2.5 - 5.0 µA is relatively low compared to the maximum CEBAF current of approximately 180 µA, the corresponding bunch charge is atypically high for CEBAF injector operation. In this work, we investigated the evolution and transmission of low-rep-rate, high-bunch-charge (0.32 to 0.64 pC) beams through the CEBAF injector. Using the commercial software General Particle Tracer, we have simulated and analyzed the …

Modeling A Nb3Sn Cryounit In Gpt In Uitf, Sunil Pokharel, Geoffey A. Krafft, A. S. Hofler

Physics Faculty Publications

Nb₃Sn is a prospective material for future superconducting RF (SRF) accelerator cavities. The material can achieve higher quality factors, higher temperature operation and potentially higher accelerating gradients (E_{acc} 96 MV/m) compared to conventional niobium. In this work, we performed modeling of the Upgraded Injector Test Facility (UITF) at Jefferson Lab utilizing newly constructed Nb₃Sn cavities. We studied the effects of the buncher cavity and varied the gun voltages from 200-500 keV. We have calibrated and optimized the SRF cavity gradients and phases for the Nb₃Sn five-cell cavities energy gains with the framework of General Particle Tracer (GPT). Our calculations show …

Numerical Simulation Of Adaptive Metabolic Response To Anti-Angiogenic Treatment In Renal Cell Carcinoma, Saranya Varakunan

Undergraduate Student Research Internships Conference

Renal cell carcinoma, a malignant kidney cancer, is often treated using anti-angiogenic drugs to prevent the growth of blood vessels within the tumour. Although tumours initially respond to this treatment, they eventually develop resistance. This resistance is hypothesized to be caused by a switch to a symbiotic metabolism that allows cells to survive even with a low blood supply.

This project seeks to computationally model the transport of oxygen, lactate, and glucose within a tumour in order to examine how cancer metabolism adapts to changes in blood vessels.

Physically Based Rendering Techniques To Visualize Thin-Film Smoothed Particle Hydrodynamics Fluid Simulations, Aditya H. Prasad

Dartmouth College Undergraduate Theses

This thesis introduces a methodology and workflow I developed to visualize smoothed hydrodynamic particle based simulations for the research paper ’Thin-Film Smoothed Particle Hydrodynamics Fluid’ (2021), that I co-authored. I introduce a physically based rendering model which allows point cloud simulation data representing thin film fluids and bubbles to be rendered in a photorealistic manner. This includes simulating the optic phenomenon of thin-film interference and rendering the resulting iridescent patterns. The key to the model lies in the implementation of a physically based surface shader that accounts for the interference of infinitely many internally reflected rays in its bidirectional surface …

Statistical And Variational Modeling And Analysis Of Passive Integrated Photonic Devices, Norbert Dinyi Agbodo

Legacy Theses & Dissertations (2009 - 2024)

The success of Si as a platform for photonic devices and the associated availabilityof wafer-scale, ultra-high resolution lithography for Si CMOS has helped lead to the rapid advance of Si-based integrated photonics manufacturing over the past decade. This evolution is nearing the point of integration of Si-based photonics together with Si-CMOS for compact, high speed, high bandwidth, and cost-effective devices. However, due to the sensitive nature of passive and active photonic devices, variations inherent in wafer-based fabrication processes can lead to unacceptable levels of performance variation both within a give die and across a given wafer. Fully understanding the role …

Optomechanical Quantum Entanglement, Kahlil Y. Dixon

LSU Doctoral Dissertations

As classical technology approaches its limits, exploration of quantum technologies is critical. Quantum optics will be the basis of various cutting-edge research and applications in quantum technology. In particular, quantum optics quite efficacious when applied to quantum networks and the quantum internet. Quantum Optomechanics, a subfield of quantum optics, contains some novel methods for entanglement generation. These entanglement production methods exploit the noise re-encoding process, which is most often associated with creating unwanted phase noise in optical circuits. Using the adapted two-photon formalism and experimental results, we simulate (in an experimentally viable parameter space) optomechanical entanglement generation experiments. These simulations …

Equations Of State For Warm Dense Carbon From Quantum Espresso, Derek J. Schauss

Theses and Dissertations

Warm dense plasma is the matter that exists, roughly, in the range of 10,000 to 10,000,000 Kelvin and has solid-like densities, typically between 0.1 and 10 grams per centimeter. Warm dense fluids like hydrogen, helium, and carbon are believed to make up the interiors of many planets, white dwarfs, and other stars in our universe. The existence of warm dense matter (WDM) on Earth, however, is very rare, as it can only be created with high-energy sources like a nuclear explosion. In such an event, theoretical and computational models that accurately predict the response of certain materials are thus very …

Investigating The Effect Of Self-Trapped Holes In The Current Gain Mechanism Of $ \Beta \Mathbf{-}{\Mathbf{Ga}}_{\Mathbf{2}}{\Mathbf{O}}_{\Mathbf{3}}$ Schottky Diode Photodetectors, Fati̇h Akyol

Turkish Journal of Physics

Monoclinic gallium oxide $(\beta\mathrm{-}{\mathrm{Ga}}_{\mathrm{2}}{\mathrm{O}}_{\mathrm{3}})$ has found great research interest in solar blind photodetector (SBP) applications due to its' bandgap $\mathrm{\sim}$4.85 eV and availability of high quality native crystal growth. Applications including missile guidance, flame detection, underwater/intersatellite communication and water purification systems require SBPs. $\beta\mathrm{-}{\mathrm{Ga}}_{\mathrm{2}}{\mathrm{O}}_{\mathrm{3}}$ SBPs with high responsivity values have been published indicating internal gain in these devices. The gain has been attributed to accumulation of self-trapped hole (STH) below Schottky metal which the lowers Schottky barrier in these devices based on some approximations rather than a proper device simulation. In this paper, technology computer-aided design (TCAD) simulation of $\beta\mathrm{-}{\mathrm{Ga}}_{\mathrm{2}}{\mathrm{O}}_{\mathrm{3}}$ …

Effect Of A Mean Free Path On Nonlinear Losses Of Trapped Vortices Driven By A Rf Field, Manula Randhika Pathirana Walive Pathiranage, Alex Gurevich

Physics Faculty Publications

We report extensive numerical simulations on nonlinear dynamics of a trapped elastic vortex under rf field, and its dependence on electron mean free path li. Our calculations of the field-dependent residual surface resistance Ri(H) take into account the vortex line tension, the linear Bardeen-Stephen viscous drag and random distributions of pinning centers. We showed that Ri(H) decreases significantly at small fields as the material gets dirtier while showing field independent behavior at higher fields for clean and dirty limit. At low frequencies Ri(H) increases smoothly with the field amplitude at small H and levels off at higher fields. The mean …