Physical Sciences and Mathematics Commons^™

Characterization Of Deposited Copper Oxide Films On Copper Substrates, Millicent Castillo

Electronic Thesis and Dissertation Repository

The deposition of copper oxide films on copper substrates was investigated by the electrochemical, thermal, and hydrothermal oxidation of copper. The formed oxides were characterized using various surface analytical techniques to determine the film’s morphology, composition, and thickness. The results show that by growing oxides electrochemically, a duplex layer composing of CuO and Cu₂O film was formed on the copper surface, having characteristics of being porous and possessing needle-like structures. An oxide film composed of CuO and Cu₂O, which shows minimal porosity and possess mixtures of crystalline and non-crystalline structures, is formed on the copper surface …

Contact Angle & Electrochemical Measurements Of Metallic Atmospheric Corrosion On Copper And Carbon Steel, Jacob J.M. Bunting, Jiju M. Joseph, Heng-Yong Nie, Samantha M. Gateman

Undergraduate Student Research Internships Conference

Understanding atmospheric corrosion has been incredibly challenging due to the complex interplay between surface microstructures, environmental variables, and electrochemical processes. The methodology presented is being developed to apply to atmospheric corrosion models of metals and other advanced materials by observing the change in contact angle in situ as a function of corrosion parameters. Performed contact angle measurements on two industrially relevant metals (copper and carbon steel) over a 1 min to 30-day time span to track the change in wettability due to the formation of an air-formed oxide layer (aged) as a function of surface roughness.

Simple And Fast Fabrication Methodology For Platinum And Carbon Ultramicroelectrodes (Ume) In Scanning Electrochemical Microscopy (Secm), Emma Mae Lord, Jiju Joseph, Samantha M. Gateman, Zhifeng Ding

Undergraduate Student Research Internships Conference

Scanning electrochemical microscopy (SECM) is a highly versatile method for measuring and imaging a wide range of systems. When paired with an intricately made ultramicroelectrode (UME) probe, SECM becomes an even more powerful tool for imaging microscale features in a system. However, purchasing these UME’s comes at a high cost with less ability for modification. Having high quality UME’s expands the ability of SECM and enables precise measuring and imaging in a wide range of applications such as solar cells in Dr. Ding’s lab, and corroding metals in Dr. Gateman’s lab. To combat this issue of high cost and set …

Galvanic Corrosion Of Carbon Steel-Stainless Steel Welds, Mi Li

Electronic Thesis and Dissertation Repository

A water leak in one of the Canada Deuterium Uranium (CANDU) nuclear reactors could lead to galvanic corrosion between the materials of its supporting structures: carbon steel (CS) and stainless steel (SS). This project investigates the effects of physical and chemical solution parameters on the corrosion of galvanically coupled dissimilar CS-SS welds, with the aim of developing a corrosion dynamics model that can be used to assess the long-term integrity of the CANDU reactor structural materials with confidence. The studied parameters were solution pH, temperature, the presence or absence of γ-radiation and the cathode:anode surface area ratio. Multiple electrochemical techniques …

Corrosion Studies On Lightweight Automotive Alloys: The Effect Of Microstructure And Fundamental Mechanisms, Wilfred J. Binns

Electronic Thesis and Dissertation Repository

Owing to their excellent strength-to-weight ratio and low density, magnesium alloys have the potential to significantly reduce the weight of automobiles leading to decreased emissions and greater range for electrical vehicles. However, the practicality of magnesium alloys for automotive and aerospace applications is severely hindered by their poor corrosion resistance in aqueous environments. Despite intensive research effort, the underlying mechanism(s) responsible for this poor corrosion resistance remains elusive. Further complicating the situation is the presence of secondary microstructures which are necessary for desirable physical properties but lead to microgalvanic coupling which exacerbates the poor corrosion resistance of magnesium alloys. This …

Corrosion Dynamics Of Carbon Steel In Used Fuel Container Environments, Dan Guo

Electronic Thesis and Dissertation Repository

The current Canadian used nuclear fuel container (UFC) design uses a pressure‑grade carbon steel (CS) vessel with its outer surface coated with a thin layer of copper. One concern regarding the structural integrity of the UFC design is the potential internal corrosion of the CS vessel. Moisture trapped inside a UFC could condense within the gap between the hemispherical head and the cylindrical body of the vessel. The internal UFC environment will be exposed to a continuous flux of ionizing radiation arising from the decay of radionuclides trapped in the used UO₂ fuel matrix.

This thesis research project investigates …

The Electrochemical Study Of Simulated Spent Nuclear Fuel (Simfuel) Corrosion Under Permanent Disposal Conditions, Ziyan Zhu

Electronic Thesis and Dissertation Repository

The safety assessment of spent nuclear fuel under permanent disposal conditions requires examination of the corrosion of the spent fuel waste form (UO₂) inside a failed waste container. The objective of this research project was to develop a detailed mechanism of the UO₂ corrosion process when exposed to groundwater. The redox conditions within a failed container in a deep geologic repository will be complex. The oxidant, H₂O₂, produced by the α-radiolysis of groundwater, will be the main driving force for fuel corrosion. However, the efficiency of fuel dissolution will be determined by the …

Electrochemical And Corrosion Examination Of Copper Under Deep Geologic Conditions For The Application Of Nuclear Waste Containers, Taylor L. Martino

Electronic Thesis and Dissertation Repository

Copper is the selected material for the fabrication of nuclear fuel waste containers in Sweden, Finland and Canada due to its corrosion resistance in the anoxic aqueous environments, anticipated in deep geological repositories. A potential oxidant for copper is bisulphide produced either by the dissolution of minerals or by sulphate-reducing bacteria. The primary goals of this thesis were to determine the mechanism of corrosion of copper in bisulphide environments and to investigate the chemistry of the bentonite porewater that will ultimately be in contact with the copper container.

The mechanism of sulphide film growth and the details of copper corrosion …

Electrochemical And Modelling Studies On Simulated Spent Nuclear Fuel Corrosion Under Permanent Waste Disposal Conditions, Nazhen Liu

Electronic Thesis and Dissertation Repository

The safety assessment models for the deep geological disposal of spent nuclear fuel require a fundamental understanding of the corrosion of spent fuel in a failed waste container. The overall research goal of this project is to investigate the corrosion of simulated spent fuel under permanent disposal conditions, using both model simulations and experimental investigations. A model for fuel corrosion has been expanded to determine the relative importance of radiolytic hydrogen and hydrogen from corrosion of the steel vessel in suppressing fuel corrosion. It was shown that, for CANDU (CANada Deuterium Uranium) fuel with moderate in-reactor burnup, only micromolar concentrations …

The Corrosion Of Carbon Steel Under Deep Geologic Nuclear Waste Disposal Conditions, Shannon L.W. Hill

Electronic Thesis and Dissertation Repository

The proposed disposal scenario for high-level nuclear waste (spent fuel) in Canada is emplacement within a sealed, deep geological repository (DGR) located in either granitic rock or sedimentary clay. Disposal is based on a multi-barrier approach, with the primary barrier being a sealed container which could be either dual-walled with a copper shell over an inner carbon steel vessel for granitic rock or a single thick-walled steel container for sedimentary clay. This study focuses on the corrosion behaviour of A516 Gr70 carbon steel as well as the corrosion products formed in a variety of groundwater compositions and concentrations expected within …

The Electrochemistry Of Hydrogen Peroxide On Uranium Dioxide And The Modelling Of Used Nuclear Fuel Corrosion Under Permanent Disposal Conditions, Linda Wu

Electronic Thesis and Dissertation Repository

This thesis reports a series of investigations examining the corrosion process of used nuclear fuel under permanent disposal conditions. The motivation of the project is that the safety assessment of deep geological disposal of spent nuclear fuel requires a fundamental understanding of the processes controlling fuel corrosion which could lead to the release of radionuclides to the geosphere from a failed container.

One primary objective of this project was to develop a computational model in order to simulate fuel corrosion under the disposal conditions. A series of simulations based on COMSOL were designed and developed to determine the influence of …