Physical Sciences and Mathematics Commons^™

A Comparative Social, Economic And Environmental Study Of How Malta Could Best Achieve Its 2020 “20-20-20” Goals, Charles G. Sinn

Masters Theses, 2010-2019

The European Union has recognized the need for an action plan to facilitate the gradual transition to a dominant, renewable energy production base for the myriad of benefits that renewable over non-renewable production brings. Malta, as a member of the EU, is obliged to achieve nationwide goals as specified in the Renewable Energy Directive with regards to electrical efficiency, carbon emissions and renewable energy production share. The goals for Malta include an achievement by 2020 of a 10 % renewable production base, a 10 % electrical efficiency improvement and an allowance for a 5 % increase in carbon emissions as …

A Preliminary Assessment Of The Long-Term Prospects For Offshore Wind Farms In Maltese Territorial Waters, Dane Orion Zammit

Masters Theses, 2010-2019

Almost all of Malta’s current interest in offshore wind development is focused on the development of an offshore wind farm at Sikka L-Bajda in northwest Malta by 2020, to help the country reach its mandated 2020 RES target. The offshore wind industry is rapidly gaining momentum, with larger projects in deeper waters further offshore being commissioned every year. Countries like Germany and the United Kingdom have actively constructed, or are planning to construct, offshore wind farms at transitional water depths before 2020. The offshore wind energy market has historically been restricted to the North Sea, the Baltic Sea and the …

Wind Flow Modeling For Wind Energy Analysis Of The Nellis Dunes Area In Nevada, Upendra Rangegowda

UNLV Theses, Dissertations, Professional Papers, and Capstones

A wind energy analysis of the Nellis Dunes area in Nevada was conducted. A DEM file which contains the elevation data was used to generate the surface model and to create a 3-D mesh of the region. Local meteorological tower data collected for a period of one year was used to generate the diagnostic initial wind fields. Upper level wind fields were created using a surface boundary layer technique along with linear interpolation of the tower level wind fields. The vertical components of the velocities were adjusted using the equation of continuity. Mass consistent 3-D wind fields were then calculated …

An Exploratory Study On Energy Consumption Of Energy Star And Non-Energy Star Homes, Prajakta Kulkarni

UNLV Theses, Dissertations, Professional Papers, and Capstones

The reduction of energy consumption is one of the economic necessities in the United States due to depleting energy sources in the world. The construction industry is stepping forward to reduce the energy consumption of buildings by efficient designs or by constructing buildings with energy efficient materials and features. In 1992, the U.S. Environmental Protection Agency (EPA) and Department of Energy (DOE) introduced the Energy Star Program to promote energy efficient products with the same or improved services. According to the EPA, Energy Star homes, which use these products, will consume 20 to 30 percent less energy than non-Energy Star …

Fuel Efficiency Assessment With Dea, Evren Kiymaz

Theses and Dissertations

In this study, Data Envelopment Analysis (DEA) is used to calculate Air Mobility Command (AMC) airlift fuel efficiency for C-17 aircraft. Fuel is a strategic asset for the United States Air Force and suitable alternatives are not yet feasible or available in the quantity required. The Air Force is pursuing several initiatives to conserve energy and operate more efficiently while sustaining the same level of effectiveness and safety. In order to manage these initiatives, it must measure how well it is doing. To measure airlift efficiency, the AMC Fuel Efficiency Office established a 7 factor weighted Fuel Efficiency Index (FEI). …

Fuel Savings Opportunities From Air Refueling, Murat Toydas

Theses and Dissertations

Fuel is a critical strategic asset for military aviation operations, yet is increasingly expensive. Air refueling offers both the opportunity to extend aircraft range and the potential to save fuel by enabling a transport aircraft to depart with less fuel in exchange for additional cargo. We evaluate the practicality of air refueling in terms of fuel savings versus distance and cargo quantity, by introducing two non-linear optimization models that examine the tradeoff between departure fuel weight and loaded cargo for given origin, destination, and tanker base positions and freight quantities to be moved. We use various numerical example scenarios to …

Environmental Life Cycle Assessment Of Coal-Biomass To Liquid Jet Fuel Compared To Petroleum-Derived Jp-8 Jet Fuel, Wayne C. Kinsel

Theses and Dissertations

The United States (U.S.) imported 57% of the petroleum products that it consumed in 2008. The Department of Defense (DOD) and in particular, the United States Air Force (USAF), consumes a large amount of oil to support the mission of defending the U.S. According to the USAF energy policy, by 2016, the Air Force (AF) must be prepared to cost competitively acquire 50% of its domestic aviation fuel requirement via an alternative fuel blend in which the alternative component is derived from domestic sources produced in a manner that is “greener” than fuels produced from conventional petroleum. This study employed …

Security Vulnerability Trends Related To Electric Power Supplied At Military Installations, Peter A. Sabatowski

Theses and Dissertations

The United States (U.S.) electric grid is considered one of the greatest inventions of the twentieth century, yet it become apparent over the past few decades that it is not without its own set of problems. The deregulation of the U.S. electric system in the late 1990s eliminated monopolies and resulted in the nation's generation, transmission, and distribution systems becoming separate entities owned and operated by multiple companies. This created a market economy in which many electric companies failed to plan for the future, did not invest in maintenance and upgrades, and began to push the aggregate system to its …

Provenance Of The Neoproterozoic Ocoee Supergroup, Eastern Great Smoky Mountains, Suvankar Chakraborty

University of Kentucky Doctoral Dissertations

The Ocoee Supergroup is a sequence of Neoproterozoic, immature, continental rift facies clastic sediments. Potential source rocks were tested by analyzing modes of detrital framework minerals, detrital mineral chemistry, whole rock geochemistry and detrital zircon U/Pb geochronology by LA-ICP-MS for Ocoee siltstone-sandstone dominated formations. Ocoee units are arkosic to subarkosic siltstones/sandstones, and ternary tectonic discrimination diagrams confirm a continental basement uplift source. Alkali feldspar predominates over plagioclase feldspar. Detrital feldspar compositions of Ocoee sediments as a group are similar to feldspar in local basement granitic rocks except for high-Ca plagioclase grains present locally in basement granitic rocks. The high alkali …

Emergent Geographies In Green Energy, Sean Tierney

Electronic Theses and Dissertations

A consensus on climate change is spurring an energy transition, but the geography of this transition is uneven and this paper evaluates the energy landscape globally, in the United States and in Colorado. Developed countries have taken the lead in installations and of next generation energy technology ownership. Green electricity has still not achieved parity with fossil fuels, which puts their adoption in the hands of policy makers who are trying to spur innovation with minimal financial disruption. Yet the future of green electricity is in question due to weak and fragmented policy regimes, but also because of inadequate R&D …

Oxidation Of Dibenzothiophene To Dibenzothiophene Using Metal Nanoparticles Supported On Silica, Karina Castillo

Open Access Theses & Dissertations

Silica and nanoparticles of Pt, Au, and Ag supported on silica were tested for the ability to oxidize dibenzothiophene (DBT) to sulfone. High performance liquid chromatography was used to study the removal of DBT from solution. In addition, X- ray diffraction, infrared spectroscopy and Raman Spectroscopy were used to characterize the product of the oxidation reaction. Further studies involved the use X-ray absorption spectroscopy to characterize the nanoparticle catalysts before and after the oxidation reaction.

To better understand the reaction, silica was synthesized at different pHs using three different acids. The acids used to synthesize the silica were HCl, HNO3, …

Development Of Wide Band Gap Semiconductor Materials For Renewable Energy, S.M. Sarif Masud

Open Access Theses & Dissertations

Several new wide band gap semiconductor nanocomposite photocatalytic materials have been synthesized from HTiNbO5 and HNb3O8 for solar energy conversion. As a source of renewable energy, the materials are being tested to produce hydrogen fuel from water via photolysis. The materials have high surface areas, are macroporous, and have flatband potentials suitable for reducing water to create hydrogen. Under visible or ultra violet light, the materials were found to be very promising as hydrogen evolving photocatalysts. As part of the synthesis of the composites, the catalysts also exhibited excellent catalytic activity under UV light for reducing ionic platinum and gold …

Simulation And Optimization Of Ultra Thin Photovoltaics, Jose Luis Cruz-Campa

Open Access Theses & Dissertations

Sandia National Laboratories (SNL) conducts pioneering research and development in Micro-Electro-Mechanical Systems (MEMS) and solar cell research. This dissertation project combines these two areas to create ultra-thin small-form-factor crystalline silicon (c-Si) solar cells. These miniature solar cells create a new class of photovoltaics with potentially novel applications and benefits such as dramatic reductions in cost, weight and material usage.

At the beginning of the project, unusually low efficiencies were obtained in the research group. The intention of this research was thus to investigate the main causes of the low efficiencies through simulation, design, fabrication, and characterization.

Commercial simulation tools were …

An Applied Investigation Of Nafion Membranes In Pem Fuel Cells: Durability Issues, Amanda Rose Rodriguez

Theses Digitization Project

The purpose of this study was to perform ex-situ tests and observe the degradation behavior of PEM fuel cells in transportation applications. Improving the efficiency of fuel cells could lead to greatly reduced vehicle energy consumption and similarly reduced vehicle emissions.

Investigating Fabrication Methods For Micro Single-Chamber Solid Oxide Fuel Cells, Man Yang

Dissertations

A Solid Oxide Fuel Cell (SOFC) is a green energy technology that offers a cleaner and efficient alternative to fossil fuels. The efficiency and utility of SOFCs can be enhanced by fabricating miniaturized component structures within the fuel cell footprint. This research focuses on the microfabrication of parallel-connected inter-digitized design of micro single chamber SOFC (μ-SC-SOFCs). In this dissertation, candidate micro/nano fabrication techniques to precisely fabricate micro patterns on planar substrates have been studied. These include EBL, soft lithography, photolithography, and direct-writing. After analyzing preliminary results, two combinational approaches were further investigated. The first method involves the combination of the …

The Potential For Gaseous Biofuels In Ireland, Darren Kenneally

Theses

According to the EU Renewables Directive 2009/28/EC, 20% of the energy across Europe needs to be renewable by 2020. This is inclusive of the energy utilised in the transport sector where 10% of this energy needs to be renewable. In order for Ireland to meet the targets set in the Renewables Directive various changes need to be applied. The utilisation of gaseous biofuels produced from the anaerobic digestion of various feedstocks will aid Ireland in meeting this directive.

In this study biodegradable municipal waste (BMW) and energy crops are analysed as potential feedstocks for the production of biomethane. This biomethane …

Sustaining Rural Economies With Wind Development, Eric J. Van Oss

CMC Senior Theses

This paper discusses the effects of wind development in rural areas. Areas of focus include: direct job creation, indirect job creation, tax revenue and government policies. The effects of state and federal renewable energy policies are discussed and well as the impacts to rural economies.

Ab Initio Simulations Of Hydrogen And Lithium Adsorption On Silicene, Tim H. Osborn

Browse all Theses and Dissertations

The energies and temperature-dependent dynamics of hydrogen and lithium chemisorption on a silicon nanosheet, called silicene, were studied using density functional theory and molecular-dynamics (MD) simulations. Silicene has a buckled honeycomb structure, and has been fabricated as suspended monolayer sheets and nanoribbons in recent experiments. We calculated the adsorption energies of hydrogen and lithium on silicene for different adsorption ratios between 3.1% and 100%. The studies will clarify the characteristics of these novel and promising nanomaterials, and pave the way for their applications.

For Hydrogen, the adsorption energy had a maximum of 3.01 eV/H for complete hydrogenation, and decreased by …

Fabrication Of Zinc Oxide Thin Films For Renewable Energy And Sensor Applications, Theresa Y. Hill

Browse all Theses and Dissertations

Progress in commercializing renewable energy technologies is being advanced by developments in Zinc Oxide material science. The photovoltaic cell, for example, generates electricity by receiving solar energy into the cell, generating electrons, and simultaneously transporting electrical charge out of the cell. Metals are capable of removing electrical charge but block transmission of sunshine. Glass and plastics are capable of transmitting sunshine but block the removal of electrical charge. Therefore an exterior layer that is both optically transparent and electrically conductive is desirable. Transparent conductive oxides (TCOs) are the ideal material for such applications since they are capable of both functions. …

Sulfur-Tolerant Catalyst For The Solid Oxide Fuel Cell, Bozeman Joe Frank Iii

Browse all Theses and Dissertations

JP-8 fuel is easily accessible, transportable, and has hydrogen content essential to solid oxide fuel cell (SOFC) operation. However, this syngas has sulfur content which results in a poisonous hydrogen sulfide that degrades electrochemical activity and causes complete SOFC failure in some cases. The goal is to synthesize and verify a cost-effective, catalyst supported on cerium oxide that either stabilizes ionic conductivity in the presence of hydrogen sulfide and/or is highly sulfur-resistant. After thorough computational analysis, it was concluded that the platinum-copper skin catalyst was the most cost-effective, sulfur-resistant catalyst. Experimental synthesis of copper, platinum, and platinum-copper skin catalysts supported …