Physical Sciences and Mathematics Commons^™

Towards Semiconductor Nanorods With Nickel/Iron Cocatalyst., Kehinde Ayorinde

Masters Theses & Specialist Projects

The adverse effects associated with the utilization of fossil fuels has led to the need to provide an alternative cleaner energy. Photocatalytic hydrogen evolution reaction via water splitting provides a renewable pathway to generating energy. Our photocatalyst system includes a semiconductor component (CdSe/CdS core/shell nanorods) to capture light and an attached metal (cocatalyst) for the hydrogen evolution reaction. Platinum is an effective metal catalyst for this reaction due to strong proton binding energy that easily facilitates the reduction of water to produce hydrogen gas. However, due to the high cost of platinum, there is a need to find a less …

Low-Load Metal-Assisted Catalytic Etching Produces Scalable Porosity In Si Powders, Konstantin Tamarov, Riku Kiviluoto, Josph D. Swanson, Bret A. Unger, Alexis T. Ernst, Mark Aindow, Joakim Riikonen, Vesa-Pekka Lehto, Kurt W. Kolasinski

Chemistry Faculty Publications

The recently discovered low-load metal-assisted catalytic etching (LL-MACE) creates nanostructured Si with controllable and variable characteristics that distinguish this technique from the conventional high-load variant. LL-MACE employs 150 times less metal catalyst and produces porous Si instead of Si nanowires. In this work, we demonstrate that some of the features of LL-MACE cannot be explained by the present understanding of MACE. With mechanistic insight derived from extensive experimentation, it is demonstrated that (1) the method allows the use of not only Ag, Pd, Pt, and Au as metal catalysts but also Cu and (2) judicious combinations of process parameters such …

The Investigation Of Photocatalytic And Adsorptive Properties Of Humic Acid Grafted Magnetite Nanoparticles For The Remediation Of Arsenic, Selenium And Phosphorous From Water, Mohammad Mamunur Rashid

FIU Electronic Theses and Dissertations

The crisis of freshwater has been a big concern worldwide. Water contamination that occurs through the discharge of toxic pollutants from different natural and anthropogenic sources have worsened the situation. Adsorption has emerged as a simple and economical water treatment procedure although the challenge is to find the right adsorbent that can efficiently remove the target contaminant followed by their easy recovery from the reaction vessel. In this dissertation, I have focused on the synthesis, characterizations and applications of environmentally compatible and magnetic humic acid coated magnetite nanoparticles (HA-MNP) as a potential adsorbent for water purification.

Phosphate is an essential …

Imidazolium Ionic Liquids As Multifunctional Solvents, Ligands, And Reducing Agents For Noble Metal Deposition Onto Well-Defined Heterostructures And The Effect Of Synthetic History On Catalytic Performance, Michael Drake Ballentine

Masters Theses & Specialist Projects

1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([BMIM]Tf2N) was investigated as a multifunctional solvent, ligand, and reducing agent for platinum deposition onto well-defined CdSe@CdS nanorods. Platinum deposition was carried out thermally and photochemically using Pt(acac)2 as the metal precursor. Thermal deposition was investigated in [BMIM]Tf2N with and without addition of a sacrificial reducing agent, and product topology was compared with the products obtained from polyol reduction using 1,2-hexadecanediol, oleic acid, and oleylamine in diphenyl ether. Photochemically induced platinum deposition was carried out at room temperature in [BMIM]Tf2N, and product topology was compared with the photodeposition products obtained from a toluene dispersion. Thermal deposition of platinum …

Development Of Dihydrochalcone Functionalized Gold Nanoparticles For Augmented Antineoplastic Activity, Jason N. Payne

Masters Theses & Specialist Projects

Phloridzin, an antidiabetic and antineoplastic agent usually found in fruit trees, is a dihydrochalcone constituent that has a clinical/pharmaceutical significance as a sodiumglucose linked transport 2 (SGLT2) inhibitor. Phloridzin never experienced widespread clinical usage in the pharmaceutical market due to its side effects and poor bioavailability when compared to other antidiabetic therapeutics. The poor bioavailability is primarily attributed to the degradation of the glycosidic bond of the phloridzin, resulting in the formation of phloretin, the aglycone of phloridzin and glucose. While phloretin displays a reduced capacity of SGLT2 inhibition, this nutraceutical shows enhanced antineoplastic activity in comparison to phloridzin. Gold …

Conjugated Polymer Nanoparticles For Biological Labeling And Delivery, Eladio A. Mendez

FIU Electronic Theses and Dissertations

Cancer remains one of the world’s most devastating diseases, with more than 10 million new cases every year. However, traditional treatments have proven insufficient for successful medical management of cancer due to the chemotherapeutics’ difficulty in achieving therapeutic concentrations at the target site, non-specific cytotoxicity to normal tissues, and limited systemic circulation lifetime. Although, a concerted effort has been placed in developing and successfully employing nanoparticle(NP)-based drug delivery vehicles successfully mitigate the physiochemical and pharmacological limitations of chemotherapeutics, work towards controlling the subcellular fate of the carrier, and ultimately its payload, has been limited. Because efficient therapeutic action requires drug …

A Facile Route To Tailoring Peptide-Stabilized Gold Nanoparticles Using Glutathione As A Synthon, Rosina Ho Wu, Tan P. Nguyen, Grant W. Marquart, Thomas J. Miesen, Theresa Mau, Marilyn R. Mackiewicz

Chemistry Faculty Publications and Presentations

The preparation of gold nanoparticles (AuNPs) of high purity and stability remains a major challenge for biological applications. This paper reports a simple synthetic strategy to prepare water-soluble peptide-stabilized AuNPs. Reduced glutathione, a natural tripeptide, was used as a synthon for the growth of two peptide chains directly on the AuNP surface. Both nonpolar (tryptophan and methionine) and polar basic (histidine and dansylated arginine) amino acids were conjugated to the GSH-capped AuNPs. Ultracentrifugation concentrators with polyethersulfone (PES) membranes were used to purify precursor materials in each stage of the multi-step synthesis to minimize side reactions. Thin layer chromatography, transmission electron …

The Impact Of Surface Ligands And Synthesis Method On The Toxicity Of Glutathione-Coated Gold Nanoparticles, Bryan Harper, Federico Sinche, Meenambika Gowrishankar, Grant Marquart, Marilyn R. Mackiewicz, Stacey L. Harper

Chemistry Faculty Publications and Presentations

Gold nanoparticles (AuNPs) are increasingly used in biomedical applications, hence understanding the processes that affect their biocompatibility and stability are of significant interest. In this study, we assessed the stability of peptide-capped AuNPs and used the embryonic zebrafish (Danio rerio) as a vertebrate system to investigate the impact of synthesis method and purity on their biocompatibility. Using glutathione (GSH) as a stabilizer, Au-GSH nanoparticles with identical core sizes were terminally modified with Tryptophan (Trp), Histidine (His) or Methionine (Met) amino acids and purified by either dialysis or ultracentrifugation. Au-GSH-(Trp)2 purified by dialysis elicited significant morbidity and mortality at …

Novel Microwave Assisted Synthesis Of Zns Nanomaterials, Suresh Pillai, Michael Seery, Damian Synnott, John Colreavy, Stephen Hinder

Articles

A novel ambient pressure microwave-assisted technique is developed in which silver and indium modified ZnS is synthesised. The as prepared ZnS is characterised by X-ray diffraction, UV-Vis spectroscopy, X-ray photoelectron spectroscopy and luminescence spectroscopy. This procedure produced crystalline materials with particle sizes below 10 nm. The synthesis technique leads to defects in the crystal which induce mid energy levels in the band gap and lead to indoor light photocatalytic activity. Increasing the amount of silver causes a phase transition from cubic blende to hexagonal phase ZnS. In a comparative study, when the ZnS cubic blende is heated in a conventional …

Development Of Tailor-Designed Gold-Platinum Nanoparticles Binary Catalysts For Efficient Formic Acid Electrooxidation, Islam M. Al-Akraa Dr, Ahmad M. Mohammad Prof, Mohamed S. El-Deab Prof, Bahgat E. El-Anadouli Prof

Chemical Engineering

The modification of a glassy carbon (GC) electrode with platinum (PtNPs) and gold (AuNPs) nanoparticles is targeted to fabricate efficient anodes for the electrooxidation of formic acid (FA). A proper adjustment of the deposition sequence of PtNPs and AuNPs could eventually enhance the electrocatalytic activity of the electrode in such a way that suppresses the CO poisoning effect during FA oxidation. The highest catalytic activity is obtained at the Au/Pt/GC electrode (with PtNPs firstly deposited on the GC electrode followed by AuNPs). This superb enhancement is quantified by comparing the relative ratio of the direct vs. the indirect oxidation peaks …

Micro- And Nanoparticles In Uv-Cured Thin Films, T. Christopher Corkery, Joseph Chan, Mike J. Idacavage, Elizabeth R. Gillies, Paul J. Ragogna

Chemistry Presentations

No abstract provided.

Corrosion Protection Of Aa 2024-T3 Aluminium Alloys Using 3, 4-Diaminobenzoic Acid Chelated Zirconium-Silane Hybrid Sol-Gels, P.C. Rajath Varma, John Colreavy, John Cassidy, Mohamed Oubaha, Colette Mcdonagh, Brendan Duffy

Articles

Organic-inorganic polymers formed by hydrolysis/condensation reactions of alkoxide precursors, such as organically modified silanes (Ormosils) have found applications as electronic, optical and protective coatings. Such coatings possess important characteristics such as chemical stability, physical strength and scratch resistance. Further performance improvement is achieved through the incorporation of zirconium and titanium based nanoparticles, also formed through the sol-gel process. However due to the inherent difference in the reactivity of the precursors, the hydrolysis of each precursor must be carried out separately before being combined for final condensation. Zirconium precursors are commonly chelated using acetic acid or acetyl acetonate prior to hydrolysis, …

Effect Of Organic Chelates On The Performance Of Hybrid Sol–Gel Coated Aa2024-T3 Aluminium Alloys, Rajath Varma, John Colreavy, John Cassidy, Mohamed Oubaha, Colette Mcdonagh, Brendan Duffy

Articles

Sol–gels are organic–inorganic polymers formed by hydrolysis/condensation reactions of alkoxide precursors, primarily silanes, which have found applications as electronic, optical and protective coatings. These coatings possess important characteristics such as chemical stability, physical strength and scratch resistance. Further performance improvement is achieved through the incorporation of zirconium and titanium based nanoparticles, also formed through the sol–gel process. However due to the inherent difference in the reactivity of the precursors, the hydrolysis of each precursor must be carried out separately before being combined for final condensation. Zirconium precursors are commonly chelated using acetic acids, prior to hydrolysis, to lower the hydrolysis …

Working Report On The Status Quo Of Nanomaterials Impact On Health And Environment, Harald Krug, Margarita Apostolova, Marite Arija Bake, Gordon Chambers, Horia Chiriac, Eva Herzog, Victoria Hand, Jürgen Höck, Peter Hoet, Nicoleta Lupu, Declan Mccormack, Maja Remskar, George Robillard, Jamila Smisterova, Jan Stetkiewicz, Speranta Tanasescu, Aris Tsatsakis, David Vaughn, Peter Wick, Jörg Wörle-Knirsch

Articles

Nanotechnology is regarded as one of the key technologies of the future and associated with high expectations by politics, science and economy. Artificially produced nanosized particles and nanoscale system components have new properties which are of importance for the development of new products and applications. Such new properties of materials and substances result from the special properties of surfaces and interfaces and in part, from the geometric shape of the material. In theory nanoparticles (NPs) can be produced from nearly any chemical; however, most NPs that are currently in use today have been made from transition metals, silicon, carbon (single-walled …

Self-Assembled Arrays Of Zno Nanoparticles And Their Application As Varistor Materials, Suresh Pillai, Declan Mccormack, John Kelly, Raghavendra Ramesh

Articles

Linear arrays of ZnO nanoparticles have been successfully prepared by a simple sol–gel condensation reaction involving chemical modifiers, followed by drying (80oC) and calcination (500 oC). The calcined material (nanoarray ZnO) is composed of approximately spherical nanoparticles of average diameter 21+/-3 nm, selfassembled to form arrays extending in length to 2–4 mm. The morphology of the ZnO is found to depend sensitively on the amounts of chemical modifiers present. In their absence the ZnO produced (nano-ZnO) is an unstructured agglomerate of nanoparticles. The mechanism for formation of these linear arrays has been investigated by examining the intermediates formed at 80 …

Distributions Of Nobel Metal Pd And Pt In Mesoporous Silica, J. Arbiol, A. Cabot, J. R. Morante, Fanglin Chen, Meilin Liu

Faculty Publications

Mesoporous silicananostructures have been synthesized and loaded with Pd and Pt catalytic noble metals. It is found that Pd forms small nanoclusters (3–5 nm) on the surface of the mesoporous structure whereas Pt impregnation results in the inclusion of Pt nanostructures within the silica hexagonal pores (from nanoclusters to nanowires). It is observed that these materials have high catalyticproperties for CO–CH₄CO–CH₄CO–CH₄ combustion, even in a thick film form. In particular, results indicate that the Pt and Pd dispersed in mesoporous silica are catalytically active as a selective filter for gas sensors.