Physical Sciences and Mathematics Commons^™

Quantification Of Dye Degradation On Titanium Dioxide-Based Membranes, Elizabeth Carol Wood

Graduate Theses and Dissertations

The purpose of this study was to examine the dye degradation on the titanium dioxide (TiO2)-based membranes. While many studies have shown photocatalytic degradation of dye on TiO2 in solution, few studies have been reported on the solid TiO2 substrate. In this work, a new method is developed to quantify the dye degradation on TiO2-based membranes. A hydrothermal method is used to synthesize the photocatalytic TiO2 nanofibers; vacuum filtration is applied to fabricate a self-assembled membrane. Silver is incorporated into the nanofibers through in situ reduction before vacuum filtration to fabricate Ag/TiO2 membrane in an attempt to red shift the …

A Study On Interactions Between Metal-Organic Frameworks And Biological Materials, Josh Phipps

Graduate Theses and Dissertations

Metal-organic frameworks or MOFs are an extremely useful tool in many areas of applications. Their popularity in recent years has arisen from their high efficiency in catalytic chemical reactions. This is made possible due to their porous interior and the ability of the MOFs components to be functionalized. These same traits make MOFs excellent for use in protein encapsulation or immobilization and have the potential to become excellent drug carriers. Their development in this utilization has been limited dramatically compared to MOFs chemical applications. This is due in part to the nature of biological processes taking longer to study, but …

Visible Light-Assisted Deconstruction/Refunctionalization Of Strained And Unstrained N-Cycloalkylanilines, Elvis Duah Boateng

Graduate Theses and Dissertations

The exploitation of ring strain as a driving force to facilitate chemical reactions is a well-appreciated principle in organic chemistry. Of the strained carbocycles frequently explored in this respect, cyclopropane ring systems have drawn considerably more interest among synthetic chemists than their homolog, the cyclobutane ring systems, even though the strain energy of cyclobutane (26.7 kcal/mol) is similar to that of cyclopropane (27.5 kcal/mol). We have previously developed a [4+2] annulation reaction for the synthesis of aniline-substituted six-membered carbocycles under photoredox catalysis via the oxidative cleavage of N-cyclobutylanilines. The key reaction involved in this method is a ring-opening process of …

Introduction Of Human Acidic Fibroblast Growth Factor (Fgf1) Variant With Increased Stability And Bioactivity, Azadeh Tavousi Tabatabaei

Graduate Theses and Dissertations

Human acidic Fibroblast Growth Factor 1 (FGF-1) involves in a broad spectrum of biological processes, including cell growth, proliferation, differentiation, migration, angiogenesis, wound healing, and embryonic development. hFGF1 non-selectively binds to cell surface hFGF receptor isoforms to elicit these cell-signaling processes. Since hFGF1 plays a significant role in tissue repair activity, that is a prime candidate for novel wound healing therapeutics. However, hFGF1 has been found to unfold near physiological temperature due to a strong electrostatic repulsion created by a dense cluster of positively charged amino acids near the c-terminus. The problem not only leads to proteolytic degradation of the …

Fabrication Of Mof Films Of Uio Or Pcn Type Through Layer-By-Layer Molecular Deposition As Well As Bulk Deposition For Catalytic Applications, John Ozdemir

Graduate Theses and Dissertations

Metal-organic frameworks (MOFs) are crystalline, porous materials comprised of symmetric organic linkers coordinated to positively charged metal atoms or metal oxide nodes. This dissertation uses strategies in crystal engineering to advance the study of functional MOFs with emphasis on thin film deposition. The first chapter of this dissertation will introduce the field of reticular chemistry to the reader and describe synthetic efforts to develop useful building blocks for MOF materials: namely porphyrin macrocycles and carboxylate capped zirconium-oxo and hafnium-oxo clusters. The building blocks for MOFs developed in the first chapter will be employed in the second and third chapters through …

Understanding Interfacial Reactions Initiating On Electrode Materials For Energy Storage Technologies, Jingnan Li

Graduate Theses and Dissertations

Since the first generation of lithium-ion batteries featured lithium cobalt oxide cathode and carbon anode commercialized in the 1990s, the high-capacity materials with lower cost are in demand to further increase the battery energy density. Lithium metal and silicon anode are promising high-capacity anode materials to achieve next-generation lithium batteries. However, both the materials actively react in electrolytes and suffer from dramatic volume change. Therefore, a reliable passivation layer at the electrolyte/electrode interphase (i.e., solid electrolyte interphase, or “SEI”) is required to support the long-term cycling of both materials. Cetrimonium hydro fluoride (CTAHF2) has been proposed and synthesized as an …

Phase-Field Modeling Of The Polymer Membrane Formation Process For Micro- And Ultra-Filtration, Michael Rosario Cervellere

Graduate Theses and Dissertations

Porous polymer membrane filters are widely used in separation and filtration process. Micro- and ultra-filtration membranes are commonly used in biopharmaceutical applications such as filtering viruses and separating proteins from a carrier solution. The formation of these membrane filters via phase inversion is a complex and interconnected process where varying casting conditions can have a wide variety of effects on the final membrane morphol- ogy. Tailoring membrane filters for specific performance characteristics is a tedious and time consuming process. The time and length scales of membrane formation make it extremely difficult to experimentally observe membrane formation. Modeling the membrane formation …

Microfabrication And Electrochemical Characterization Of A Novel Su-8 Probe With An Array Of Individually Addressable Electrodes Suitable For Redox Cycling Experiments In Ultra-Small Volumes, Mahsa Lotfi Marchoubeh

Graduate Theses and Dissertations

Redox cycling is an electrochemical technique that utilizes closely spaced generator and collector electrodes to cycle reversible redox species between their oxidative states. With advantages in signal amplification, selectivity of species based on their electrochemical reaction mechanism, and limited or no background subtraction, this technique is well suited for selective detection of important electrochemically active molecules such as dopamine at basal or slowly changing levels.

Miniaturized medical devices have become an area of great interest for measurement of chemicals in limited volumes with low concentrations or in sensitive tissues. A probe on a polymeric SU-8 substrate with suitable dimensions and …

Development Of Biomaterials For Drug Delivery, Raquel De Castro

Graduate Theses and Dissertations

Drug delivery systems (DDS) have highly evolved in the last decades with the development of hydrogels and nanoparticles. However, high systemic uptake, side effects, low bioavailability, and encapsulation efficiency continue to be a major hurdle faced by such DDSs.

Nanoparticles and hydrogels can be specifically designed for targeted DDSs to mitigate some of the problems. This dissertation aimed to design two DDSs for ocular drug delivery and one for cancer treatment. The first project sought to develop chitosan nanoparticles (Cs-NP) using PEGDA as a copolymer to encapsulate gentamicin (GtS) for ocular drug delivery. Cs-NPs contain positive charges that can interact …

Electrochemical Oxidation Of Individual Silver Nanoparticles: Exploring The Effect Of Particle Shape, Capping Ligand, Electrolyte, And Potential On The Signal, Jazlynn Sikes

Graduate Theses and Dissertations

Nanomaterials have revolutionized science and technology. Their unique properties can be exploited, and nanoparticles are being used as catalysts, antimicrobials, drug delivery vehicles, sensors, and more. However, the fundamental properties of nanomaterials and their interactions with their surrounding environments are still poorly understood. In this work, a single-particle approach was used to observe the effects of capping ligand, surrounding solution, and particle shape on the oxidative process to gain deeper understanding of silver nanoparticle properties. When allowed the opportunity, the particles will adsorb to the electrode surface then oxidize in rapid succession upon electrode activation, regardless of capping ligand as …

Elucidating Collagen Degradation Synergy Between Col G And Col H From Hathewaya (Clostridium) Histolytica And Identifying Novel Structural Features In Hpt And Rec Domains From Vars Histidine Kinase In V. Alginolyticus, Perry Caviness

Graduate Theses and Dissertations

In this research the mechanisms by which Hathewaya (Clostridia) histolytica collagenases are secreted and work together to degrade collagens are investigated. While H. histolytica collagenases Col G and Col H have similar multi-domain structures the difference in number of and orientation of the domains hint that the two target different regions in collagen. Study small angle x-ray scattering (SAXS) was used to give a low-resolution envelope of full-length Col G and Col H and Col G/Col H non-catalytic domains bound to a collagen-like peptide (mini-collagen). SAXS derived envelopes along with structural information was used to tease out the mechanisms by …

Understanding The Interfacial Reactions Initiating On Lithium Metal Surfaces In Next-Generation Battery Technologies, Joshua A. Lochala

Graduate Theses and Dissertations

Li-ion batteries have started to reach the theoretical maximum energy. Next-generation batteries represent the future of portable energy sources for vehicle electrification and grid energy storage. Li metal battery is one of the most promising next-generation battery technologies that could potentially double the cell-level energy of conventional Li-ion batteries. However, Li metal has multiple drawbacks that require addressing before realization. These drawbacks include dendrite formation leading to internal short and increasing internal resistance due to the breakdown of electrolyte, leading to rapid cell death. These problems stem from the interfacial reactions occurring during the plating and stripping of Li metal. …

Investigation Of The Structural, Electronic, And Thermoelectric Properties Of Mono- Chalcogenides, Aida Sheibani

Graduate Theses and Dissertations

The structural, electronic, and thermoelectric properties of GeTe are studied using density functional theory and Boltzmann transport equations. This material has a rhombohedral crystal structure in ambient temperature with a ferroelectric behavior due to lack of inversion symmetry. This study suggests that the presence of asymmetry in GeTe can lead to an improvement in the thermoelectric properties of this material. In addition, studies on introducing Group III, IV, and V dopants to GeSe show that while these impurities can improve the power factor and decrease the lattice thermal conductivity, they cannot enhance the figure of merit.

Ensemble And Single Particle Studies Of Cation Exchange In Cuins2/Zns Qds And Their Application In Super-Resolution Imaging, Anh Tue Nguyen

Graduate Theses and Dissertations

Colloidal quantum dots (QDs) have great potential in many applications such as bioimaging, light emitting diodes, solar cells and lasers. However, a great number of studies have been focused on Cd based (II-VI) and Pb (IV-VI) based materials which are not suitable for mass production. Therefore, alternative types of QD containing less toxic materials have been introduced, including CuInS2 QDs. This I-III-VI semiconductor nanocrystals also attract lots of attention due to their large Stock shift, long fluorescence lifetime and high defect tolerance, making them attractive emitters for applications in bioimaging, photovoltaics and light emitting diodes.

In the first project, we …

Development Of Forward Osmosis Based Separations: A Novel Approach In Membrane Technology, Yu-Hsuan Chiao

Graduate Theses and Dissertations

Tackling the worldwide severe water shortage, the membrane technology is considered to be the most efficient approach and hence, used widely as a cost-effective sustainable solution. “Forward osmosis (FO)” has been the major attention in recent time. FO uses osmotic pressure as the driving force to draw the water passing the membrane and achieve the desired separation performance. In general, it is considered to be a process with tremendous potential to resolve the present-day water shortage with extremely low energy consumption. However, the challenges of membrane and draw solution regeneration associated with FO processes must be conquered prior to their …

Understanding And Controlling Lithium Microstructure During Electroplating For Energy Applications, Yang Tian

Graduate Theses and Dissertations

Lithium-ion batteries are reaching the specific theoretical capacity limit, while lithium metal batteries are regarded as the ideal energy storage system for the next generation “beyond lithium-ion” battery systems. The lithium metal anode is considered as the “Holy grail” of anodes due to its relatively low electrochemical potential (-3.04 V vs SHE) and high theoretical capacity (3860 mAh g-1). However, the application of lithium metal anodes is hindered because of significant reaction between metallic lithium and electrolytes, as well as uneven electro-plating, which leads to dendrite formation, causing safety problems.

The kinetic parameters of Li ions such as diffusion coefficient …

Controlled Synthesis And Utilization Of Metal And Oxide Hybrid Nanoparticles, Cameron Cowgur Crane

Graduate Theses and Dissertations

This dissertation reports the development of synthetic methods concerning rationally-designed, hybrid, and multifunctional nanomaterials. These methods are based on a wet chemical, solution phase approach that utilizes the knowledge of synthetic organic and inorganic chemistry to generate building blocks in solution for the growth of nanocrystals and hybrid nanostructures. This work builds on the prior knowledge of shape-controlled synthesis of noble metal nanocrystals and expands into the challenging realm of the more reactive first row transition metals. Specifically, a microemulsion sol-gel method was developed to synthesize Au-SiO2 dimers as precursors for the synthesis of segmented heterostructures of noble metals that …

Role Of The Inner Shell Architecture On The Various Blinking States And Decay Dynamics Of Core-Shell And Core-Multishell Quantum Dots, Pooja Bajwa

Graduate Theses and Dissertations

Colloidal semiconductor nanocrystals (quantum dots, QDs) have received much attention in recent years due to their uniquely size-tunable properties leading to a number of promising applications. Some of their most popular applications include their use as fluorescent probes in biology, as electro-optical components and in photovoltaic devices. CdSe-based QDs are particularly important because of their ease of synthesis, high photoluminescence quantum yields (PL QYs) across the whole visible spectrum and their photostabilty. Shelling of core QDs is usually carried out to improve their optical properties, minimize outer environmental effects on their properties, and avoid toxic element exposure to the environment. …

Influence Of Shelling Temperature And Time On The Optical And Structural Properties Of Cuins2/Zns Quantum Dots, Colette Robinson

Graduate Theses and Dissertations

CIS/ZnS core/shell QDs are an important class of nanomaterials for optoelectronic, photovoltaic and photoluminescence applications. They consist of lower toxicity materials than the prototypical II-VI Cd-based QDs and show long fluorescence lifetimes, which generates prospective in biological imaging applications. It is vital to develop reproducible synthetic methods for this new class of nanomaterials in order to maintain small sizes with high QYs. CIS core QDs have been shelled with ZnS at various temperatures from 90-210°C for reaction times ranging from 20-140 minutes to examine the role of thermodynamics and kinetics on the shell growth. Using HR-TEM and ICP-MS, it was …

An Investigation Of The Electronic Coupling In Some Dimeric Ruthenium (Ii) Polypyridine Complexes, Roland Ngebichie Njabon

Graduate Theses and Dissertations

A detailed understanding of respiration at the molecular level requires an understanding of the many electron transfer steps involved in the process. These electron transfer processes are extremely fast and are impossible to measure by simple rapid mixing techniques. In order to get around this problem, scientists have used laser flash photolysis. This technique relies on the fact that under proper conditions, a reactant can be generated by a very short laser pulse. Once generated, the course of the reaction can be monitored by various techniques capable of very rapid time response. Many applications of this methodology rely on the …