Physical Sciences and Mathematics Commons^™

Electrocatalytic “Volcano-Type” Effect Of Nano-Tio2 (A)/(R) Phase Content In Pt/Tio2-CnX Catalyst, Ai-Lin Cui, Yang Bai, Hong-Ying Yu, Hui-Min Meng

Journal of Electrochemistry

The relationship between the electrochemical activity of fuel cell catalysts and Pt particle size, as well as the catalyst support and co-catalyst is still unclear. In this work, FESEM, XRD, BET, TEM and CV techniques were adopted to investigate the effects of TiO₂ anatase (A)/rutile (R) phases content on the electrochemical activity of Pt electrocatalyst. The results showed that the anatase-rutile phase transformation occurred during the heat treatment of TiO₂ at 700 ~ 900 oC accompanied by the growth of two-phase crystalline size, and anatase was completely transformed into rutile at 900 oC. TEM results revealed that the …

Sensitive Photoelectrochemical Assay Of Nucleic Acids Based On Catalytic Hairpin Assembly And Ru(Nh3)63+, Ya-Min Fu, Xiao-Xia Yan, Xiao-Hua Zhang, Jin-Hua Chen

Journal of Electrochemistry

A simple “signal-on” photoelectrochemical (PEC) sensing platform for sensitive assay of nucleic acids was developed by coupling catalytic hairpin assembly (CHA) signal amplification strategy with Ru(NH₃)₆³⁺. Herein, cadmium sulfide (CdS) was deposited on the TiO₂/indium tin oxide (ITO) electrode by a method of successive ionic layer adsorption and reaction (SILAR), serving as one kind of photoelectric material to broaden absorption range of TiO₂ and to improve the photoelectric conversion efficiency. Thereafter, the capture DNA (C-DNA) was immobilized on the CdS/TiO₂/ITO electrode. Simultaneously, Au-hairpin DNA probe 1 (Au-HP1) and hairpin DNA …

Recent Progress On Tio2-Based Anode Materials For Sodium-Ion Batteries, Si-Tian Lian, Jian-Shuai Lv, Qiang Yu, Guang-Wu Hu, Zhuo Chen, Liang Zhou, Li-Qiang Mai

Journal of Electrochemistry

Titanium dioxide (TiO₂) represents a stable, low-cost, and nontoxic anode material for sodium-ion batteries (SIBs). However, the low electrical conductivity limits its electrochemical activity (specific capacity) and rate capability, hindering its widespread applications. In this article, we show that different crystal forms of TiO₂ have different pore structures, resulting in the distinct sodium storage capacities. Accordingly, the article introduces how TiO₂ microstructures influence sodium storage. The nanoparticle structure can improve the rate performance of the material due to its short ion diffusion distance, and the internal cavity of the hollow structure is beneficial to cycle stability. …

Real Time Monitoring Of Photocatalysis: An Application And Expansion Of The Quartz Crystal Microbalance, Perrin Godbold

Senior Honors Projects, 2010-2019

There are many applications of photocatalytic chemistry, with hundreds of researchers investigating photocatalytic materials. Another method of investigation could aid these researchers and contribute significantly to this field. This study attempts to develop a new method of analysis by expanding the capabilities of the Quartz Crystal Microbalance (QCM) into the realm of photocatalysis. We coated QCM crystals with the stable and well-known photocatalyst, titanium dioxide, and utilized these coated crystals to begin to develop an analysis procedure for our modified instrument. Some indication of the QCM’s sensitivity was seen, but the UV irradiation elicited a frequency change independent of the …

An Effective Method For The Preparation Of High Temperature Stable Anatase Tio2 Photocatalysts, Rachel Fagan, Declan Mccormack, Suresh Pillai, Damian Synnott

Articles

An efficient, rapid and straightforward method for the preparation of nitrogen and fluorine (N, F) codoped high temperature stable anatase using a microwave pre-treatment is reported. Using a single source, ammonium fluoride (NH₄F) for both nitrogen and fluorine, effective doping of the precursor titanium isopropoxide (TTIP) was possible. These samples were characterised for their structural and optical properties using X-ray diffraction (XRD), Fourier transform IR (FTIR), Raman spectroscopy and UV-vis spectroscopy. In terms of the anatase to rutile transition enhancement using a novel microwave assisted technique, the sample prepared in a composition of 1:8 TiO₂: NH …

Improved High Temperature Stability Of Anatase Tio2 Photocatalysts By N, F, P Co-Doping, Rachel Fagan, Declan Mccormack, Steven Hinder, Suresh Pillai

Articles

Among the three commonly occurring phases (anatase, rutile, and brookite) of TiO2, the anatase form is reported to be the best photocatalyst due to the improved charge-carrier mobility and the greater number of surface hydroxyl groups. The anatase to rutile transition in titania photocatalysts usually occurs at a temperature between 500 °C to 700 °C. Development of a high temperature stable (above 1000 °C) anatase phase is important for various environmental applications (e.g. self-cleaning ceramic tiles, anti-microbial sanitary wares, etc.). In this study, the use of ammonium hexafluorophosphate as a single source dopant (method A) and urea, trifluoroacetic acid and …

Dc Electrical Conductivity Retention And Electrical Compensation Of Polyaniline By Tio2 At Higher Loading Percentages In Polyaniline@Tio2 Nanocomposites, Mohammad Mansoob Khan Dr, M. O. Ansari, S. A. Ansari, M. H. Cho

Dr. Mohammad Mansoob Khan

Electrically conductive HCl-doped polyaniline Pani)@titanium dioxide (TiO2) nanocomposites were prepared by the in-situ oxidative polymerization of aniline in the presence of different amounts of TiO2 nanoparticles. The synthesized Pani@TiO2 nanocomposites were confirmed by transmission electron microscopy, X-ray diffraction, UV-visible spectroscopy, and thermogravimetric analysis. The stability of the Pani@TiO2 nanocomposites in terms of their electrical conductivity retention was examined under isothermal and cyclic aging conditions, and compared with that of pure Pani. The Pani@TiO2 nanocomposites showed higher thermal stability than pure Pani. The effect of competitive doping/de-doping by TiO2 was examined at different Pani to TiO2 weight ratios. TiO2 at a …

Improved Electrode Performance In Microbial Fuel Cells And The Enhanced Visible Light-Induced Photoelectrochemical Behaviour Of Ptox@M-Tio2 Nanocomposites, Mohammad Mansoob Khan Dr

Dr. Mohammad Mansoob Khan

Visible light active PtOx@M-TiO2 and PtOx@P-TiO2 (x = 0, 1 and 2) nanocomposites were fabricated via a simple, green and environmentally benign process using an electrochemically active biofilm. The formation of the PtOx@M-TiO2 and PtOx@P-TiO2 nanocomposites was confirmed by X-ray diffraction, ultraviolet–visible–near infrared spectrophotometry, photoluminescence spectroscopy, and X-ray photoelectron spectroscopy (XPS). XPS revealed the presence of Pt0, Pt2+ (PtO) and Pt4+ (PtO2) species on the surface of M-TiO2 and P-TiO2. The presence of mixed valence states of PtOx on the surface of the PtOx@M-TiO2 nanocomposite and defect states in M-TiO2 helps absorb visible light more efficiently compared to the PtOx@P-TiO2 …

Preparation Of Pt-Tio2/Graphene Composites With High Catalytic Activity Towards Methanol Oxidation And Oxygen Reduction Reaction, Li Qi, Ying Yin, Wen-Guang Tu, Bing-Bing Wu, Zhao-Sheng Wang, Jian-Guo Liu, Jun Gu, Zhi-Gang Zou

Journal of Electrochemistry

A series of graphene-supported TiO₂ nanoparticles (TiO₂/G) with different TiO₂ contents were prepared by a facile hydrothermal method, and then the Pt-TiO₂/G catalysts were successfully prepared by reducing Pt-precursor with microwave technique. Compared with Pt-G catalysts, the catalytic performance toward oxygen reduction reaction (ORR) and methanol oxidation reaction (MOR) of Pt-TiO₂/G catalysts was improved due to the addition of TiO₂. However, the excessive TiO₂ would lead to a poor catalytic performance of Pt-TiO₂/G catalysts because of the low electrical conductivity of TiO₂.

A Highly Efficient Tio2-Xcx Nano-Heterojunction Photocatalyst For Visible-Light Induced Antibacterial Applications, Vinodkumar Etacheri, Michael Seery, Stephen Hinder, Georg Michlits, Suresh Pillai

Articles

Visible-light-induced antibacterial activity of carbon-doped anatase-brookite titania nano-heterojunction photocatalysts are reported for the first time. These heterostructures were prepared using a novel low temperature (100 °C) non-hydrothermal low power microwave (300 W) assisted method. Formation of interband C 2p states was found to be responsible for the band gap narrowing of the carbon doped heterojunctions. The most active photocatalyst obtained after 60 minutes of microwave irradiation exhibits a 2-fold higher visible-light induced photocatalytic activity in contrast to the standard commercial photocatalyst Evonik-Degussa P-25. Staphylococcus aureus inactivation rate constant for carbon-doped nano-heterojunctions and the standard photocatalyst was 0.0023 and -0.0081 min …

A Review On The Visible Light Active Titanium Dioxide Photocatalysts For Environmental Applications, Miguel Pelaez, Nicholas Nolan, Suresh Pillai, Michael Seery, Polycarpos Falaras, Athanassios G. Kontos, Patrick S.M. Dunlop, Jeremy W.J. Hamiltone, J. Anthony Byrne, Kevin O’Shea, Mohammad H. Entezari, Dionysios D. Dionysiou

Articles

Development of visible light active (VLA) titania photocatalysts

Fujishima and Honda (1972) demonstrated the potential of titanium dioxide (TiO 2) semiconductor mate-rials to split water into hydrogen and oxygen in a photo-electrochemical cell. Their work triggered the development of semiconductor photocatalysis for a wide range of environmental and energy applica-tions. One of the most significant scientific and commercial advances to date has been the development of visible light active (VLA) TiO2 photocatalytic materials. In this review, a background on TiO2 struc-ture, properties and electronic properties in photocatalysis is presented. The development of different strategies to modify TiO2 for the utilization …

Preparation And Electrochemical Performance Of Tio2/Gns Nanocomposite As Anode Materials For Lithium-Ion Batteries, Lin-Lin Qin, Huan Zhang, Xiao-Jing Liu, Jian-Hui Xu, Yi-Ning Shi, Ming-Sen Zheng, Quan-Feng Dong

Journal of Electrochemistry

The honeycomb-like porous TiO2/graphenes (TiO2/GNs) nanocomposite was prepared by a reflux method. SEM and TEM results showed that nanosized anatase TiO2 (about 5~10 nm) were dispersed uniformly on the surface of the GNs. The TiO2/GNs composite showed excellent rate and cycling performance: A stable charge capacity of 169.5 mAh?g-1 was obtained at 30C, and can restore to 241.7 mAh?g-1 while current went back to 1C. The stable charge capacity of TiO2/GNs nanocomposite electrode up to 201.9 mAh?g-1 was achieved at 10C in the first cycle, and could be maintained at 181.4 mAh?g-1 after 300 times of cycling.

Superhydrophilic/Superhydrophobic Surface Constructions On Titanium And Their Effects On Anti-Bacterial Properties, Guo-Wei Wang, Qiao-Ling Huang, Ren Hu, Chang-Jian Lin, Hao Wang, Li-Hai Zhang, Pei-Fu Tang

Journal of Electrochemistry

The microbial infection of biomaterials often causes clinic problems and sometimes even leads to the prosthesis failure. It is, therefore, important to prevent the biomaterials from bacterial contamination. This can be done by using anti-bacteria drugs. However, this method causes physiological burdens to the patients and does not always work. To stop the contamination from the just beginning is believed to be a better choice. The first step for infection is the attachment of bacteria on the material. In this work, the thin TiO2 nanotubes array films were constructed with totally different wettabilities showing either superhydrophobic or superhydrophilic. The bacterial …

A Systematic Study Of The Effect Of Silver On The Chelation Of Formic Acid To A Titanium Precursor And The Resulting Effect On The Anatase To Rutile Transformation Of Tio2, Nicholas Nolan, Michael Seery, Steve Hinder, Linda Healy, Suresh Pillai

Articles

Anatase to rutile transition in an unmodified synthetic titania usually occurs at a temperature range of 600 – 700 °C. Various methods such as addition of metallic and non-metallic dopants and modifying the precursor have previously been reported to influence the anatase to rutile transition temperature. In the current study, the effect of addition of increasing amounts of silver to the extent of chelation of a formate group to a titanium precursor and the resulting effects on the transformation of anatase to rutile has been studied. The addition of silver (0, 1, 3 and 5 mol %) on the anatase …

Spectroscopic Investigation Of The Anatase-To-Rutile Transformation Of Sol-Gel Synthesised Tio2 Photocatalysts, Nicholas Nolan, Suresh Pillai, Michael Seery

Articles

Among the three major phases in titania, anatase is reported to be a better photocatalytically active phase. Anatase to rutile transformations, under normal conditions, usually occurs at a temperatue range of 600- 700 °C. Various chemical additives have previously been employed to extend the anatase transition to higher temperatures. Effect of employing various concentrations of formic acid and water on phase transition has systematically been studied by XRD, FTIR and Raman spectroscopy. A considerably higher anatase phase (41%) has been obtained at 800 ºC and 10% anatase composition is retained after annealing the materials at 900 ºC for the optimised …

Photoelectrochemical Properties Of Tio_2 Nanoparticles, Jie Qu, Ying Li, Qi-Wei Jiang, Xue-Ping Gao

Journal of Electrochemistry

The protonated titanate nanoparticles were obtained at room temperature and subsequently calcined at different temperatures(300 ℃,400 ℃,500 ℃,600 ℃ and 700 ℃) in air.The obtained products were characterized by XRD,TEM and UV-Vis.It is found that the grain sizes of TiO2 nanoparticles calcined at 300 ℃ were about 20 nm,and increased gradually with the temperature rise.Photoelectric performance was measured with I～V curve and electrochemical impedance spectroscopy(EIS).The TiO2 nanoparticles obtained at 500 ℃ showed the best photoelectrochemical properties with a photovoltaic conversion efficiency of 6.39%,which is much higher than those at other temperatures.In addition,it is also demonstrated that the charge transfer resistance …