Physical Sciences and Mathematics Commons^™

Solar-Powered Microgrids In Northern California: An Opportunity For Resilience, Marina Riddle

Master's Projects and Capstones

Planned and unplanned power outages have been increasing in frequency and duration, negatively impacting all public sectors, and threatening public safety. These outages are deadly to those who rely on medical devices. As climate change-fueled extreme weather events (wildfires, earthquakes, storms, etc.) also increase in frequency, our electrical grid must be prepared to bounce back. Microgrids provide necessary redundancy and reliability. Through a novel GIS suitability analysis, based on solar radiation, land use type, local energy demand, distance to transmission lines, distance to roads, and slope, optimal locations for solar-powered microgrids throughout Northern California were determined. The counties of Fresno, …

Templates To Transition: Making Solar-Generated Electricity Accessible For Lagos Residents, Adeola O. Adebajo

Senior Theses

According to the EPA, direct energy production results in at least 25% of the world’s emissions. This refers to emissions produced by burning coal, natural gas, and oil for electricity and heat. With the increasing effects of climate change, sustainable energy is becoming increasingly important as the world shifts away from fossil fuels. However, implementation of renewable energy sources is not as fast or as widespread as necessary. This paper aims to identify feasible solutions to the problem of renewable energy affordability in Nigeria especially in growing megacities like Lagos to ensure long lasting and climatefriendly energy sources. Two major …

Solid Thermal Storage As An Energy Storage Device In Insulated Solar Electric Cookers: Thermal Modeling And Experiment, Michael Antonio Fernandez

Physics

The use of solid thermal storage (STS) as an energy storage device in insulated solar electric cookers (ISEC) was explored using a thermal simulation before retrofitting an existing cooker without energy storage and testing it under several conditions. STS sizing, material selection, and geometry were examined from both theoretical and practical perspectives and re-examined following experimental results. Characterization of the system’s thermal interfaces and methods to improve their thermal conductivities were investigated resulting in several performance enhancements to the system.

"Demeter" Soil Monitoring System, Ryan Matthews, Rachel Rummer, Temilolu Fayomi, Alex Fuller

Williams Honors College, Honors Research Projects

The purpose of this project is to develop a soil monitoring system that can remotely sense and relay soil conditions back to a user. The deMETER soil probe, Demeter is the Greek goddess of the harvest, is designed to aid hobbyist gardeners, small-scale farms, and nurseries to monitor their dynamic soil conditions and maximize their harvest. The probe is a self-powered system that can monitor the moisture and essential nutrients of the soil profile to determine which areas should receive water and fertilizer. This would significantly cut water and fertilizer waste. The solution will include an embedded system with sensors …

An Investigation Of Diode Failure, Nicholas James Adams

Physics

Solar electricity can be used to cheaply cook food and charge electronic devices. We investigate the viability of using diodes as heating elements for insulated solar electric cooking (ISEC). In addition, information on designing and constructing ISEC compatible phone chargers and rechargeable LED lighting systems is included.

Dual-Axis Solar Tracker, Bryan Kennedy

All Undergraduate Projects

Renewable energies, and fuels that are not fossil fuel-based, are one of the prolific topics of debate in modern society. With climate change now becoming a primary focus for scientists and innovators of today, one of the areas for the largest amount of potential and growth is that of the capturing and utilization of Solar Energy. This method involves using a mechanical system to track the progression of the sun as it traverses the sky throughout the day. A dual-axis solar tracker such as the one designed and built for this project, can follow the sun both azimuthally and in …

Software-Defined Infrastructure For Iot-Based Energy Systems, Stephen Lee

Doctoral Dissertations

Internet of Things (IoT) devices are becoming an essential part of our everyday lives. These physical devices are connected to the internet and can measure or control the environment around us. Further, IoT devices are increasingly being used to monitor buildings, farms, health, and transportation. As these connected devices become more pervasive, these devices will generate vast amounts of data that can be used to gain insights and build intelligence into the system. At the same time, large-scale deployment of these devices will raise new challenges in efficiently managing and controlling them. In this thesis, I argue that the IoT …

Application Of Silicon Nanohair Textured P-N Junctions In A Photovoltaic Device, Michael Small

Electronic Theses and Dissertations

The goal of this project is to design and develop a fabrication process for a silicon photovoltaic device which incorporates a nanohair textured p-n junction. The silicon nanowires are etched into a silicon wafer, comprising an epitaxial p-layer on n-substrate, via metal-assisted chemical etching (MACE). The resulting nanowires contain p-n junctions that lie along the length of the vertical nanowires. This construct has the potential to increase the optical bandwidth of a silicon photovoltaic device by allowing a greater amount of short wavelength light to reach the junction. In addition, the MACE method of nanofabrication has the potential for decreasing …

Solar Powered Single-Axis Heliostat Active Solar Tracking Device, Mason Kyle Roberts

Physics

As a means of cooking food, the burning of biomass accounts for over 4 million premature deaths in third world countries (“Household Air Pollution and Health”). The focus of this project was to explore an alternative that could utilize focused sunlight to cook food. A solar tracker was designed to be affixed to a parabolic, reflective, tilted single axis heliostat to follow the sun throughout the day and focus the reflected light to the bottom of a cooking surface. This surface became hot enough to for the preparation of food or boiling/sterilization of water.

A goal for each project was …

An Economic Analysis Of Residential Photovoltaic Systems With And Without Energy Storage, Rodney Moses Kizito

Graduate Theses and Dissertations

Residential photovoltaic (PV) systems serve as a source of electricity generation that is separate from the traditional utilities. Investor investment into residential PV systems provides several financial benefits such as federal tax credit incentives for installation, net metering credit from excess generated electricity added back to the grid, and savings in price per kilowatt-hour (kWh) from the PV system generation versus the increasing conventional utility price per kWh. As much benefit as stand-alone PV systems present, the incorporation of energy storage yields even greater benefits. Energy storage (ES) is capable of storing unused PV provided energy from daytime periods of …

Visualization And 3d Printing Of A 3d Solar Tracker Model Using Mayavi And Pov-Ray, Aditya Mehra

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

In this work, we have created a realistic model of a solar tracker using Mayavi: 3D scientific data visualization and plotting in Python, Enthought Canopy:a comprehensive Python analysis environment and Persistence of Vision Ray Tracer, or POV-Ray, a ray tracing program which generates photo-realistic images from a text-based scene description, a model of the solar tracker was also 3D printed.

Smart Home Energy Management: An Analysis Of A Novel Dynamic Pricing And Demand Response Aware Control Algorithm For Households With Distributed Renewable Energy Generation And Storage, Jamal Abushnaf

Theses: Doctorates and Masters

Home energy management systems (HEMS) technology can provide a smart and efficient way of optimising energy usage in residential buildings. One of the main goals of the Smart Grid is to achieve Demand Response (DR) by increasing end users’ participation in decision making and increasing the level of awareness that will lead them to manage their energy consumption in an efficient way. This research presents an intelligent HEMS algorithm that manages and controls a range of household appliances with different demand response (DR) limits in an automated way without requiring consumer intervention. In addition, a novel Multiple Users and Load …

Experimental Investigation Of Plasma Dynamics In Jets And Bubbles Using A Compact Coaxial Plasma Gun In A Background Magnetized Plasma, Yue Zhang

Electrical and Computer Engineering ETDs

Numerous solar and astrophysical observations of jet- and bubble-like plasma structures exhibit morphological similarities, suggesting that there may be common plasma physics at work in the formation and evolution processes of these structures at different system scales. The ideal magnetohydrodynamics (MHD) provide the necessary theoretical basis for employing laboratory experiments to investigate key physical processes in nonlinear astrophysical and solar systems, especially when magnetic fields are present.

A coaxial magnetized plasma gun has been designed, installed, and operated in the HelCat linear device at the University of New Mexico. In Region I, a current-driven plasma jet is formed. The plasma …

A Novel Approach For Evaluating The Impact Of Fixed Variables On Photovoltaic (Pv) Solar Installations Using Enhanced Meta Data Analysis Among Higher Education Institutions In The United States, Diane N. De Hoyos

Open Access Theses & Dissertations

The global demand for electric energy has continuously increased over the last few decades. Some mature, alternative generation methods are wind, power, photovoltaic panels, biogas and fuel cells. In order to find alternative sources of energy to aid in the reduction of our nation's dependency on non-renewable fuels, energy sources include the use of solar energy panels. The intent of these initiatives is to provide substantial energy savings and reduce dependence on the electrical grid and net metering savings during the peak energy-use hours.

The focus of this study explores and provides a clearer picture of the adoption of solar …

Photovoltaics: An Investigation Into The Origins Of Efficiency On All Scales, Jeremy Alexander Bannister

Senior Projects Spring 2016

This project is comprised of a set of parallel investigations, which share the common mo- tivation of increasing the efficiency of photovoltaics. First, the reader is introduced to core concepts of photovoltaic energy conversion via a semi-classical description of the phys- ical system. Second, a key player in photovoltaic efficiency calculations, the exciton, is discussed in greater quantum mechanical detail. The reader will be taken through a nu- merical derivation of the low-energy exciton states in various geometries, including a line segment, a circle and a sphere. These numerical calculations are done using Mathematica, a computer program which, due to …

Performance Analysis And Modelling Of Hybrid Photovoltaic-Thermal Solar Panels, Nicole C. Annis

Doctoral Dissertations

A photovoltaic-thermal (PVT) panel was constructed, tested, and modelled using both MATLAB and TRNSYS. During the experimental testing, which took place on the Missouri University of Science and Technology campus in Rolla, Missouri; two identical PVT panels were tested alongside two PV panels to gather an electrical baseline for comparison. Approximately 69 days’ worth of data were of data were collected during the summer of 2014. The PV electrical, PVT electrical, PVT thermal and PVT combined (electrical and thermal) efficiencies were 3.5-5.6%, 3.4-5.4%, 20.9-11.6%, and 24.3-17.0%, respectively.

A MATLAB program was developed using existing equations for one-dimensional, quasi-steady model of …

Life Cycle Assessment Projection Of Photovoltaic Cells: A Case Study On Energy Demand Of Quantum Wire Based Photovoltaic Technology Research, Shilpi Mukherjee

Graduate Theses and Dissertations

With increasing clean-energy demand, photovoltaic (PV) technologies have gained attention as potential long-term alternative to fossil fuel energy. However, PV research and manufacture still utilize fossil fuel-powered grid electricity. With continuous enhancement of solar conversion efficiency, it is imperative to assess whether overall life cycle efficiency is also being enhanced. Many new-material PV technologies are still in their research phase, and life cycle analyses of these technologies have not yet been performed. For best results, grid dependency must be minimized for PV research, and this can be accomplished by an analytical instrument called Life Cycle Assessment (LCA).

LCA is the …

Analysis And Optimization Of The Scheffler Solar Concentrator, Simone Alberti

Master's Theses

The Scheffler reflector is a new solar concentrator design which maintains a fixed focus while only having a single axis tracking mechanism. This design makes the construction and operation of high temperature solar concentrators accessible to developing nations. In this project, I wrote computer simulation codes to better understand the dynamics and the effect of deformation or deviations from ideal conditions in order to define necessary manufacturing and operational tolerances. These tools and knowledge drove the prototyping of new reflector concepts by myself and other students on my team. A fiberglass prototype was able to drive the cost of a …

Application Of A High-Performance Optically Enhanced Solar Thermal Collector System, Timothy H. Cameron

Honors Theses

In an effort to make Union College a more environmentally friendly campus, this research project focuses on the application of Union’s liquid-based solar thermal collector system. The motivation for this research project is due to the increasing demand for renewable energy sources in order to decrease our society’s dependence on fossil fuels. The system features nine, 16-tube, evacuated tube solar modules which absorb radiant solar energy from the sun. Through a two loop system, thermal energy is stored in water within two-80 gallon storage tanks. This research project involves the design, construction, and analysis of two applications in order to …

Gis-Based Suitability Modeling And Multi-Criteria Decision Analysis For Utility Scale Solar Plants In Four States In The Southeast Us, Kata Tisza

All Theses

Photovoltaic (PV) development shows significantly smaller growth in the Southeast U.S., than in the Southwest; which is mainly due to the low cost of fossil-fuel based energy production in the region and the lack of solar incentives. However, the Southeast has appropriate insolation conditions (4.0-6.0 KWh/m2/day) for photovoltaic deployment and in the past decade the region has experienced the highest population growth for the entire country. These factors, combined with new renewable energy portfolio policies, could create an opportunity for PV to provide some of the energy that will be required to sustain this growth. The goal of the study …

Carbon Nitride And Conjugated Polymer Composite Materials, Josh Byers

Electronic Thesis and Dissertation Repository

The semiconductor and photovoltaic properties of carbon nitride (CNx) thin films prepared using a reactive magnetron sputtering technique were investigated both individually and as composites with the organic conjugated polymers polybithiophene (PBT) and poly(3-hextlthiophene) (P3HT). At low nitrogen content, the film structure was dominated by graphitic sp² percolation networks, whereas at higher nitrogen contents CNx films started to demonstrate semiconductor properties, as evidenced by the occurrence of photoconductivity and the development of a space charge region. When CNx was deposited onto a PBT substrate, it was found to function as an acceptor material improving the photocurrent generation both in …

Csp Desalination/Water Purification Unit, Sean Goodison

Industrial Technology and Packaging

An estimated 3.4 million people die each year from unsanitary water or inaccessible water supply. Most of these deaths take place in the developing, third world (99%). There is a dilemma arising on the world stage as well. The water demand/supply deficit is expected to increase significantly over the next 37 years if preemptive action isn’t taken. 97% of the world water supply is oceanic, making it an attractive solution to the water deficit. Providing autonomous, “deploy and watch” systems for utilizing sustainable energy to provide purified water for unitized low pricing has the potential to penetrate a large world …

An Approach To Power Efficiency Determination In The Solar Energy Systems Using Central Composite Design And Box-Behnken Design, Juan Venegas Mendez

Open Access Theses & Dissertations

We are living in an industrialized world that relies on fossil fuels. The ways, in which these fossil fuels have damaged the earth, in special the environment is worth of special attention and corrective actions. In our days, the climate change (global warming) it is becoming the number one topic. These changes are affecting our health, comfort and our way of living. Solar systems have been working among us since several years, but the truth is that most of us really don't understand how they work and more important, how they work in time in different conditions. Solar panels are …

Multipolymer Interactions In Bulk Heterojunction Photovoltaic Devices, Grant Olson

Physics

Multipolymer photovoltaics, single layer devices made up of multiple photoactive polymers, can create organic photovoltaics (OPVs) with a wider spectral response than single polymer systems without the difficult fabrication of a tandem. Our group has successfully created multipolymer solar devices with 2% power conversion efficiency. We have analyzed the optical and electrical properties of these devices, and found that it may be possible for polymers to assist each other with charge extraction, though combining polymers disrupts single polymer crystallinity.

Dynamic Modelling Of Single Phase Grid Connected Photovoltaic System, Gopi Krishna Ari

UNLV Theses, Dissertations, Professional Papers, and Capstones

Grid-connected photovoltaic (PV) power systems have been sustaining an exponential growth rate during the past decade. This steep growth is driven by a growing concern about climate change, the adoption of an aggressive regional renewable portfolio standard, rebates and tax incentives, and reduction in PV system cost. One of the main technical barriers that can ultimately limit further PV penetration is the fast variations in the PV system's output power induced by cloud transients. Such events are known to cause voltage fluctuations which may lead to excessive operations of voltage regulation equipment and light flickering.

Solar irradiance variability, which can …

Spatial Light Dilution As A Technique For Conversion Of Solar Energy To Algal Biomass, Daniel J. Dye

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

A photobioreactor has been designed and developed to efficiently utilize solar irradiance through spatial dilution of sunlight. The concept of spatial light dilution is simple: incident sunlight is spread over a large surface area, thus reducing the photon flux density of the light. The implementation of this technique, however, is difficult. The reactor described within uses a new approach to spatial light dilution, utilizing recently-developed optical components to diffuse concentrated sunlight inside an algae culture. Preliminary productivity tests indicate a 2-3 fold increase in productivity per unit aperture (sunlight collection area) over a control reactor with direct-sunlight. Aperture productivity of …