Physical Sciences and Mathematics Commons^™

The Effect Of Walnut Shell Ash On The Properties Of Cement Paste And Mortar: A Study On Partial Replacement Of Cement, Ali Shebli, Jamal Khatib, Adel Elkordi

BAU Journal - Science and Technology

In the pursuit of a more sustainable future, the utilization of agricultural waste in cementitious products has emerged as a popular and effective solution. The current study explores the feasibility of incorporating ash derived from walnut nutshells, considered agro residues, into eco-friendly blended cement paste and mortars to examine its impact on their properties. A range of blended cement mixtures was formulated by incorporating walnut shell ash (WSA) in three varying proportions of 5%, 10%, and 15% relative to the weight of the cement. Tests were conducted to investigate the properties of the blended cement paste and mortar incorporating WSA, …

Towards Digital Twins For Optimizing Metrics In Distributed Storage Systems - A Review, May Itani, Layal Abu Daher, Ahmad Hammoud

BAU Journal - Science and Technology

With the exponential data growth, there is a crucial need for highly available, scalable, reliable, and cost-effective Distributed Storage Systems (DSSs). To ensure such efficient and fault tolerant systems, replication and erasure coding techniques are typically used in traditional DSSs. However, these systems are prone to failure and require different failure prevention and recovery algorithms. Failure recovery of DSS and data reconstruction techniques take into consideration different performance metrics optimization in the recovery process. In this paper, DSS performance metrics are introduced. Several recent papers related to adopting erasure coding in DSSs are surveyed together with highlighting related performance metrics …

Molybdenum Versus Tungsten Based Polyoxometalates For Highly Effective Methylene Blue Removal, Roula Abi Saad, Ghassan Younes, Mohammad H. El- Dakdouki, Rami Al-Oweini

BAU Journal - Science and Technology

[SiW₁₂O₄₀]^4-(SiW₁₂) and [Mo₈O₂₆]^4- (Mo₈) were synthesized and characterized by Fourier Transform Infrared spectroscopy (FTIR). The prepared polyoxometalates were studied as potential adsorbents for the removal of methylene blue (MB) from an aqueous solution. Various operational parameters—contact time, adsorbent dose, initial dye concentration, pH, and temperature— were meticulously assessed by UV/Vis spectrophotometry to study its impact on the adsorption efficacy. An inverse relationship was observed between the percentage dye removal and the initial dye concentration, highlighting the complexes' superior adsorption capabilities under lower dye loads. The …

Optimization Of The Bio-Synthesis Of Magnesium Nanoparticles From Staphylococcus Haemolyticus: A Pilot Study, Mariam Bassam, Malak Mezher, Mahmoud Khalil

BAU Journal - Science and Technology

Nanotechnology is developing rapidly. This field has many influences in humans’ life. Nanoparticles (NPs) have many unique properties including the size, shape, morphology, and surface area. The synthesis of NPs could be achieved by three ways: physical, chemical, and biological. However, the biological synthesis of NPs has a priority on the other domains due to its safety and environmental friendship. In this regard, the main objective of this study was to synthesize magnesium (Mg) NPs from the bacterium S. haemolyticus which was isolated from the Lebanese wastewater. Different parameters were applied to detect the best conditions to produce the highest …

Volar V-Y Advancement Flaps In Reconstructing Fingertip Injuries, Sawsan Abiad

BAU Journal - Science and Technology

Fingertip injuries with exposed bones and joints require immediate or early closure for the preservation of function and avoidance of complications. The ideal procedure should maintain the length of the finger and cover the defect with non-tender, well-padded skin with normal sensation. The aim of this study was to evaluate the role of the different types of volar V-Y advancement flaps in reconstructing and resurfacing injuries of the fingertips at different levels and angles. Thirty patients (N=30) sustaining fingertip injuries of variable etiology and lost components, type III & IV according to Allen’s classification were divided into two groups (n=15) …

Research On 3d Object Detection Method With Cross-Module Attention, Renjie Xu, Xiaoming Zhang, Chen Wang, Peng Wu

Journal of System Simulation

Abstract: To address the issue of feature loss that occurs during the extraction and transmission of target features in 3D object detection tasks using point cloud data, this study proposes an object detection method based on cross-module attention. This method incorporates a channel attention module and a spatial attention module to enhance the crucial feature information. Through feature transformation, the features from different stages of the attention module are connected to mitigate the loss of features during the extraction and transmission process. To tackle the problem of inadequate detection performance in target detection networks for objects of different scales, a …

Reliable Emergency Rescue Model Of Uavs Based On Blockchain, Mengyao Du, Kai Xu, Miao Zhang, Xiang Fu, Quanjun Yin

Journal of System Simulation

Abstract: Natural disasters may unpredictably disrupt ground communication infrastructure and transportation systems, and UAVs emergency response can deal with such uncertainties and highly dynamic scenarios. Aiming at the robustness requirements of decentralized rescue systems. UAV emergency rescue chain (UERChain) based on blockchain technology is proposed. By deploying UAV backbone nodes within a layered local network, the smart contracts for managing reputation considering UAV social relationships are designed. The blockchain is employed as a trust mechanism to realize the trustworthy interactions among distributed UAVs. Experimental results show that, UERChain has higher robustness, and within controllable resource constraints, the reputation management and …

Automatic Target Recognition Of Substation 3d Scene For Digital Twin, Qian Tu, Jun Li, Dongliang Fan, Qi Kong, Jie Shen

Journal of System Simulation

Abstract: In order to improve the accuracy of automatic target recognition and promote the effect on substation operation and maintenance, automatic target recognition of substation 3D scene for digital twin is proposed. The automatic target recognition model for the three dimensional scene of the substation is constructed. The perception module of the model is used to collect the real-time status data of substation, and the communication module is used to transmit the data to digital twin modules. This module, based on the received data information, realizes the deep fusion and panoramic mapping of substation information through the knowledge base constructed …

Application Of Improved Path Tracking Algorithm In Robot Slam, Qian Li, Ye Tao, Hui Li

Journal of System Simulation

Abstract: Mapping is an important part of automated logistics. At present, SLAM is widely used. However, in large-scale scenes, errors are accumulated because robots often repeatedly measure and scan the region edge, which makes it impossible to quickly build a high-precision and complete map. An autonomous mapping method based on auxiliary path tracking is proposed, in which the given initial sketch is grid denoised and the auxiliary path is fitted and improved by multi segment cubic polynomial. The improved pure pursuit algorithm is used to guide the robot to build the map and improve the total distance and time of …

Simulation On High-Speed Train Carriage Evacuation Considering Passengers Moving To Adjacent Carriages, Zuoan Hu, Tian Zeng, Yidong Wei, Yi Ma

Journal of System Simulation

Abstract: To study the influence of passengers moving to adjacent carriages on high-speed train carriages' evacuation, a cellular automata model considering export selection is established. Taking the CR400BF second-class carriage as the research object, some analytical indexes such as evacuation efficiency, number of conflicts and the congestion degree are used to study the effect of passengers moving to adjacent carriages on carriage evacuation, and the passenger seat distribution, the number of passengers transferred from adjacent carriages and the opening door modes of adjacent carriages are discussed. The simulation results show that the discretized seat distribution reduces the times of conflicts …

Development Of Several Typical Virtual Reality Fusion Technologies, Qiqi Feng, Zhiming Dong, Wencheng Peng, Yi Dai, Bingshan Si

Journal of System Simulation

Abstract: Virtual reality fusion can realize the two-way interaction, mapping and linkage between virtual world and physical world, which attracts the attention of countries in the world. In order to sort out and make statistics on concept connotation, academic status and application of the related new technologies, digital twin, cyber-physical systems, metaverse and live-virtual-constructive simulation are taken as representatives. The comparison on the development process, functional characteristics, target trends, etc. is carried out.

Urban Uav Path Planning Based On Improved Beetle Search Algorithm, Qingqing Yang, Minyi Deng, Yi Peng

Journal of System Simulation

Abstract: An improved SABAS is proposed to improve the safety and path smoothing of UAV missions in urban multi-obstacle environments and to obtain the shortest path. The algorithm no longer completely depends on the difference of odor concentration between the left and the right tentacles of beetle when exploring the path for position update. Instead, it makes full use of the strong searching ability of BAS algorithm, and introduces the annealing algorithm to add the neighborhood position solution of the next position, and finally selects the next best position from the neighborhood position solution. Metropolis criterion of annealing algorithm is …

Airport Operational Efficiency Evaluation Based On Combined Weighting-Topsis Model, Jie Hu, Fan Bao

Journal of System Simulation

Abstract: In order to improve the scientificity and comprehensiveness of the airport operational efficiency evaluation, a new method based on the combined weighting-TOPSIS model is proposed. From 4 dimensions of stand operational efficiency, passenger boarding efficiency, aircraft taxiing efficiency, and coordination efficiency, a new airport operational efficiency evaluation system consisting of 11 indicators, such as flight approach rate, corridor bridge turnover rate, stand change ratio, etc., are constructed. G1 method and entropy weight method are implemented respectively to calculate the subjective and objective weights of the evaluation indicators, and the combined weights are calculated by minimizing the deviation of subjective …

Research And Design Of Etc Simulation Platform For Expressway, Fumin Zou, Feng Guo, Sijie Luo, Lüchao Liao, Nan Li, Yue Xing

Journal of System Simulation

Abstract: It is difficult to quantitatively calculate and display the real-time traffic situation of expressway ETC system, and there is no simulation system for ETC to optimize the operating situation. A simulation system based on ETC data in proposed, in witch there are three key algorithms. ETC data feature extraction algorithm provides the feature of generating simulation data for the simulation platform. The improved multitask scheduling algorithm has the computing ability of multitasks in simulation environment. The algorithm of expressway traffic flow control strategy provides the decision index for traffic flow control on the way. The experimental results show that …

Research On Digital Twin Data Modeling And Evaluation Method Of Automated Container Terminal, Guoxuan Xu, Daofang Chang, Jiaqi Li, Qiang Ling

Journal of System Simulation

Abstract: To make full use of the massive operation data of automated container terminals and further realize the digital and intelligent transformation of terminals driven by digital twin, a method for digital twin data modeling and effect verification and evaluation of automated container terminals is proposed. The application framework and operation mechanism based on digital twin are studied. Based on the data processing logic of digital twin framework, a method of terminal operation process evolution and dynamic data modeling based on digital twin is proposed. To verify whether the data could meet the effective operation of the digital twin, a …

Optimized Scheduling Of Distribution Network With Distributed Generation Based On Coronavirus Herd Immunity Optimizer Algorithm, Xiaomeng Wu, Rongze Yuan, Yingliang Li, Qi Zhu

Journal of System Simulation

Abstract: Following the large-scale entry of distributed new energy into the network, the uncertainty factor of the distribution network increases significantly, and the difficulty of reactive power optimization scheduling increases accordingly. Traditional optimization solutions have many limitations and shortcomings, and a dynamic reactive power optimization scheme for active distribution networks based on a multi-scenario approach is proposed. The mathematical modeling is carried out separately for the uncertainty of new energy and load, and the multi-scenario method is used to transform the uncertainty problem into a deterministic problem. A mathematical model is constructed on the distribution network side to pursue the …

Reducing Food Scarcity: The Benefits Of Urban Farming, S.A. Claudell, Emilio Mejia

Journal of Nonprofit Innovation

Urban farming can enhance the lives of communities and help reduce food scarcity. This paper presents a conceptual prototype of an efficient urban farming community that can be scaled for a single apartment building or an entire community across all global geoeconomics regions, including densely populated cities and rural, developing towns and communities. When deployed in coordination with smart crop choices, local farm support, and efficient transportation then the result isn’t just sustainability, but also increasing fresh produce accessibility, optimizing nutritional value, eliminating the use of ‘forever chemicals’, reducing transportation costs, and fostering global environmental benefits.

Imagine Doris, who is …

Data Simulation Testing Framework For Complex Process Equipment Software, Jinkun Zhang, Longfei Shi, Chi Hu, Hao Zhang, Yonghui Yang

Journal of System Simulation

Abstract: Due to the complex task, tight coupling, strict timing, and a large amount of interchange data, the technical threshold of automated testing of bus communication equipment software is high, and the implementation is difficult. The ideas of data-driven testing and keyword-driven testing are introduced, and a data simulation testing framework is proposed. Configuration rules are formulated and implemented in the framework. Testers can simulate peripheral data for complex process equipment software and implement automated testing by only focusing on the task analysis, and configuring interchange data and keywords. There is no need to develop test scripts, which reduces the …

Task Scheduling For Internet Of Vehicles Based On Deep Reinforcement Learning In Edge Computing, Xiang Ju, Shengchao Su, Chaojie Xu, Beibei He

Journal of System Simulation

Abstract: Aiming at the offloading and execution of delay-constrained computing tasks for internet of vehicles in edge computing, a task scheduling method based on deep reinforcement learning is proposed. In multi-edge server scenario, a software-defined network-aided internet of vehicles task offloading system is built. On this basis, the task scheduling model of vehicle computation offloading is given. According to the characteristics of task scheduling, a scheduling method based on an improved pointer network is designed. Considering the complexity of task scheduling and computing resource allocation, the deep reinforcement learning algorithm is used to train the pointer network. The vehicle offloading …

Unrelated Parallel Machine Scheduling With Additional Resource And Learning Effect, Youlian Zheng, Deming Lei

Journal of System Simulation

Abstract: To solve unrelated parallel machine scheduling problem(UPMSP) with additional resource and learning effect, a dynamical artificial bee colony(DABC) algorithm is proposed to minimize the makespan. A new representation and decoding process is given and two initial bee swarms are constructed. A swarm evaluation method is applied to dynamically decide employed bee swarms and onlooker bee swarms. Employed bee phase and onlooker bee phase are implemented in different ways to increase exploration ability. The experimental results show that the new strategies of DABC are effective and reasonable, and can obtain results with better convergence, average value and stability, which d …

Research On Network Public Opinion Propagation Model Of Major Epidemics Under Cross-Infection Of Double Emotions, Yaming Zhang, Yanyuan Su, Guiru Zhao, Xiaoyu Guo

Journal of System Simulation

Abstract: Major epidemics provoke a variety of netizens' emotions. To some degree, the interaction of netizens' intense emotions determine the development direction of public opinion. Considering the complexity and dual emotional contagion, the impact of emotional factors in network public opinion is quantified to three dimensions indicators, emotional enhancement, differences and conversion rates. SIPINR public opinion propagation model is constructed. The equilibrium points and the transmission threshold are estimated and the stability is proved. The law of network public opinion propagation during major epidemics is revealed through numerical simulation. The results show that the dual emotional contagion would lead to …

Modeling And Simulation On Production Logistics Of Intelligent Workshop Manufacturing System Based On Efsm, Liuzhen Li, Chao Jin, Tingyu Lin, Yaoqin Zhu

Journal of System Simulation

Abstract: The production logistics mode of manufacturing industry is developing rapidly, on which the modeling and simulation can provide the decision support for the design, analysis and transformation of manufacturing system. A description of the entity elements in intelligent workshop manufacturing system is given according to the classification of "human machine material environment rule". A production and logistics componentized EFSM model is created on the basis of EFSM and componentized modeling ideas. The modeling process for multi-job production in smart shop and the component model instantiation methodology are elaborated. The simulation running through the automatic conversion of EFSM-DEVS model and …

Research And Development Of Simulation Training Platform For Multi-Agent Collaborative Decision-Making, Cheng Cheng, Zhijie Chen, Ziming Guo, Ni Li

Journal of System Simulation

Abstract: Reinforcement learning simulation platform can be an interactive and training environment for reinforcement learning. In order to make the simulation platform compatible with the multi-agent reinforcement learning algorithms and meet the needs of simulation in military field, the similar processes in multi-agent reinforcement learning algorithms are refined and a unified interface is designed to embed and verify different types of deep reinforcement learning algorithms on the simulation platform and to optimize the back-end service of the simulation platform to accelerate the training process of the algorithm model. The experimental results show that, by unifing the interface, the simulation platform …

Nitrogen-Doped Graphite Felt On The Performance Of Aqueous Quinone-Based Redox Flow Batteries, Heng Zhang, Li-Xing Xia, Shan Jiang, Fu-Zhi Wang, Zhan-Ao Tan

Journal of Electrochemistry

Modification of electrode is vitally important for achieving high energy efficiency in aqueous quinone-based redox flow batteries (AQRFBs). The modification of graphite felt (GF) was carried out by means of urea hydrothermal reaction, and simultaneously, the effects of hydrothermal reaction time on the functional groups and surface structure of nitrogen-doped graphite felt were studied. The surface morphology and defect, element content and surface chemical state of the modified electrode were characterized by scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET) test, Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS). The electrochemical performance of the modified electrodes was evaluated by cyclic voltammetry, electrochemical impedance …

An In-Situ Raman Spectroscopic Study On The Interfacial Process Of Carbonate-Based Electrolyte On Nanostructured Silver Electrode, Yu Gu, Yuan-Fei Hu, Wei-Wei Wang, En-Ming You, Shuai Tang, Jian-Jia Su, Jun Yi, Jia-Wei Yan, Zhong-Qun Tian, Bing-Wei Mao

Journal of Electrochemistry

The solid-electrolyte interphase (SEI) plays a key role in anodes for rechargeable lithium-based battery technologies. However, a thorough understanding in the mechanisms of SEI formation and evolution remains a major challenge, hindering the rapid development and wide applications of Li-based batteries. Here, we devise a borrowing surface-enhanced Raman scattering (SERS) activity strategy by utilizing a size optimized Ag nanosubstrate to in-situ monitor the formation and evolution of SEI, as well as its structure and chemistry in an ethylene carbonate-based electrolyte. To ensure a reliable in-situ SERS investigation, we designed a strict air-tight Raman cell with a three-electrode configuration. Based on …

Electrochemical Performance Of Porous Ceramic Supported Tubular Solid Oxide Electrolysis Cell, Heng-Ji Wang, Wen-Guo Chen, Zhou-Yi Quan, Kai Zhao, Yi-Fei Sun, Min Chen, Ogenko Volodymyr

Journal of Electrochemistry

Solid oxide electrolysis cell (SOEC) is an efficient and clean energy conversion technology that can utilize electricity obtained from renewable resources, such as solar, wind, and geothermal energy to electrolyze water and produce hydrogen. The conversion of abundant intermittent energy to hydrogen energy would facilitate the efficient utilization of energy resources. SOEC is an all-ceramic electrochemical cell that operates in the intermediate to high temperature range of 500–750 ℃. Compared with traditional low temperature electrolysis technology (e.g., alkaline or proton exchange membrane cells operating at ~100 ℃), the high-temperature SOEC can increase the electrolysis efficiency from 80% to ~100%, providing …

Table Of Contents, The Editors

Coal Geology & Exploration

No abstract provided.

Critical Links And Development Trends Of Research On Active Tectonics, Yuan Daoyang, Wang Youlin, Li Shuwu, Wang Wanhe, Li Linyuan, Zou Xiaobo, Wen Yameng

Coal Geology & Exploration

Following a brief introduction of the general characteristics of active tectonics in China, this study analyzed two new features of large earthquakes with M_s ≥ 7 that have struck continental China since the beginning of the 21st century: (1) Large earthquakes occur primarily in clusters along the boundary fault zone of the Bayanhar active tectonic block—part of the Qinghai-Tibet ateau active tectonic block. (2) Reverse fault-fold earthquakes have occurred multiple times within active basins or at basin-mountain boundaries. In response to the new seismic activity features and the new demand for disaster prevention and mitigation of engineering construction and …

Optimization Of Data Acquisition Parameters For Deep Seismic Reflection Surveys In Complex Terrain, Yan Yunxiang, Li Pei, Zhi Min, Liu Jianda, Wang Zichen, Zhang Ying, Pei Gendi, Li Linyuan, Mou Qi, Jia Jin

Coal Geology & Exploration

Fujian, located in the orogen region of the coastal areas of southeast China, exhibits well-developed structures and complex surface conditions, which make deep seismic reflection surveys challenging. In response to the diversity and complexity of seismogeological conditions in Fujian, this study optimized the seismic excitation means based on previous deep seismic surveys. Specifically, the combination of large, medium, and small guns was transitioned into the layout of normal guns (spacing of shot points: 600 m) and large shots (spacing of shot points: 15 km), leading to enhanced folds of large shots. Through simulation analysis, this study calculated the spacing of …

Analogue Modeling Of Love-Type Channel Waves And Their Response To Faults, Liu Qiang, Hu Jiwu, Wang Pan, Shi Xianxin, Jia Qian

Coal Geology & Exploration

Owing to its high resolution and low energy attenuation, channel wave-based seismic exploration has been widely applied in the geophysical prospecting of hidden disaster-causing factors in underground coal mines. However, its accuracy fails to meet the requirements of intelligent mine mining presently. At present, the analogue modeling of channel waves mostly focuses on Rayleigh-type channel waves using 2D models, leading to a lack of research on Love-type channel waves. To explore the propagation law of Love-type channel waves, this study investigated the waves in the 3D analogue modeling of channel waves. Firstly, the wave and particle vibration characteristics of Love-type …