Physical Sciences and Mathematics Commons^™

Imprecise Probabilities In Engineering Analyses, Michael Beer, Scott Ferson, Vladik Kreinovich

Departmental Technical Reports (CS)

Probabilistic uncertainty and imprecision in structural parameters and in environmental conditions and loads are challenging phenomena in engineering analyses. They require appropriate mathematical modeling and quantification to obtain realistic results when predicting the behavior and reliability of engineering structures and systems. But the modeling and quantification is complicated by the characteristics of the available information, which involves, for example, sparse data, poor measurements and subjective information. This raises the question whether the available information is sufficient for probabilistic modeling or rather suggests a set-theoretical approach. The framework of imprecise probabilities provides a mathematical basis to deal with these problems which …

Rbd2po4: Room Temprature Synthesis, Chemical And Structural Stablity Upon Heating, Masoud Mollaee

Open Access Theses & Dissertations

Monoclinic RbD2PO4 polycrystals were synthesized via the room temperature crystallization of RbH2PO4 dissolved in D2O. Powder x-ray diffraction (XRD) data collected at T=25 ºC indicate that this deuterated compound crystallizes in space group P21/m with unit cell parameters a=7.688í?, b=6.192í?, c=4.781í? and β=109.02°, and is isomorphic with the intermediate-temperature phase of its hydrogenated counterpart rubidium dihydrogen phosphate (RDP). We found no evidence of previously reported [Phase Transitions 80, 17 (2007)] polymorphic phase transition in rubidium dideuterium phosphate (DRDP) upon heating from room temperature to 210 ºC. All lattice parameters vary smoothly within this temperature range, demonstrating that the P21/m phase …

Model Fusion: A New Approach To Processing Heterogeneous Data, Omar Ochoa

Open Access Theses & Dissertations

In many practical situations, it is necessary to extract

information from data of different types. For example, in geosciences, several sources of data can be used to determine the interior structure of the earth: the first arriving waves from earthquakes and from man-made sources, measurements of the earth's gravity field, measurements of the dispersion of surface waves generated by earthquakes, etc. At present, most existing data processing techniques deal only with data of one type.

A joint use of all the information derived from multiple types of data sources is an important theoretical and practical challenge. Such a joint use …

Novel Copper (Ii) Mediated Transfection Nano-Systems And Biological Properties Of Pyridinium Surfactants, Sarit Pal

Open Access Theses & Dissertations

Efficacy of gene therapy is relied upon the improvement of gene delivery vectors into mammalian cells. Although viral-based polynucleotide carriers are still considered as the most common method for gene delivery but the cost effectiveness, nonspecific lethal immune response has evoked the renaissance of non-viral synthetic delivery systems. An initial discovery by Felgnar et al showed Cationic Liposomes (CLs) (having an overall positive charge) when mixed with DNA to form CL-DNA complexes can enhance the transfer of polynucleotides into cells followed by its expression. Presently, a flurry of experimental works is taking place for the better understanding of structural characterization …

Post-Pareto Optimality Methods For The Analysis Of Large Pareto Sets In Multi-Objective Optimization, Victor Manuel Carrillo

Open Access Theses & Dissertations

Multiple objective optimization involves the simultaneous optimization of more than one, possibly conflicting, objectives. Multiple objective optimization problems arise in a variety of real-world applications. In general, the main difference between single and multi-objective optimization is that in multi-objective optimization there is usually no single optimal solution, but a set of equally good alternatives with different trade-offs, also known as Pareto-optimal solutions. There are two general approaches to solve multiple objective optimization problems: mathematical methods and meta-heuristic methods. The first approach involves the aggregation of the attributes into a linear combination of the objective functions, also known as scalarization. The …

Method Development For A Chemical And Biological Analysis Of Glucocorticoids In Wastewater, Maria Carmen Lozano

Open Access Theses & Dissertations

Glucocorticoids are a class of steroid hormones that can either be produced synthetically or naturally by the adrenal glands. The synthetic glucocorticoids are highly prescribed in the United States for their anti-inflammatory and immunosuppressive properties to treat a variety of ailments and diseases; however, these have been implicated in a number of adverse human conditions such as obesity, metabolic syndrome, immune-suppression, delayed puberty, adrenal insufficiency and Cushing Syndrome, among others. Ongoing research has shown that synthetic and natural hormones are transported to aquatic environments via mammalian excretion or wastewater effluent, and as a result, the release of glucocorticoids into the …

Surface Plasmon Polaritons And Waveguide Modes At Structured And Inhomogeneous Surfaces, Javier Polanco

Open Access Theses & Dissertations

In chapter 1, properties of a p-polarized surface plasmon polariton are studied, propagating circumferentially around a portion of a cylindrical interface between vacuum and a metal, a situation investigated earlier by M. V. Berry (J. Phys. A: Math. Gen. 8, (1975) 1952). When the metal is convex toward the vacuum this mode is radiative and consequently is attenuated as it propagates on the cylindrical surface. An approximate analytic solution of the dispersion relation for this wave is obtained by an approach different from the one used by Berry, and plots of the real and imaginary parts of its wave number …

Thermal Barrier Coatings (Tbc's) For High Heat Flux Thrust Chambers, Christopher Michael Bradley

Open Access Theses & Dissertations

The last 30 years materials engineers have been under continual pressure to develop materials with a greater temperature potential or to produce configurations that can be effectively cooled or otherwise protected at elevated temperature conditions. Turbines and thrust chambers produce some of the harshest service conditions for materials which lead to the challenges engineers face in order to increase the efficiencies of current technologies due to the energy crisis that the world is facing. The key tasks for the future of gas turbines are to increase overall efficiencies to meet energy demands of a growing world population and reduce the …

Analysis Of Vehicle Interactions On Interstate Highways: Discrete Choice And Linear System Approaches, Alicia Romo

Open Access Theses & Dissertations

The research in this dissertation developed statistical and linear system models to predict driving behavior according to driver attributes, vehicle characteristics, car-following dynamics and/or driving conditions. The scope of this research was limited to the interaction of two vehicles traveling in the same direction on interstate highways.

The statistical models proposed in this research investigated the contributions of the different vehicle types on the manner and likelihood of collision. Discrete choice models were used to estimate the probability of the types of collision (rear-end, angle and sideswipe) as functions of driver attributes, striking and struck vehicle types, pre-crash driving actions …

Structural, Optical And Electrical Properties Of Yttrium-Doped Hafnium Oxide Nanocrystalline Thin Films, Abhilash Kongu

Open Access Theses & Dissertations

Hafnium oxide (HfO2) has emerged as the most promising high-k dielectric for Metal-Oxide-Semiconductor (MOS) devices and has been highlighted as the most suitable dielectric materials to replace silicon oxide because of its comprehensive performance. In the present research, yttrium-doped HfO2 (YDH) thin films were fabricated using RF magnetron sputter deposition onto Si (100) and quartz with a variable thickness. Cross-sectional scanning electron microscopy coupled with Filmetrics revealed that film thickness values range from 700 A° to 7500 A°. Electrical properties such as AC Resistivity and current-voltage (I-V) characteristics of YDH films were studied. YDH films that were relatively thin (<1500 A°) crystallized in monoclinic phase while thicker films crystallized in cubic phase. The band gap (Eg) of the films was calculated from the optical measurements. The band gap was found to be ∼5.60 eV for monoclinic while it is ∼6.05 eV for cubic phase of YDH films. Frequency dependence of the electrical resistivity (ρac) and the total conductivity of the films were measured. Resistivity decreased (by three orders of magnitude) with increasing frequency from 100 Hz to 1 MHz, attributed due to the hopping mechanism in YDH films. Whereas, while ρac∼1Ω-m at low frequencies (100 Hz), it decreased to ∼ 104 Ω-cm at higher frequencies (1 MHz). Aluminum (Al) metal electrodes were deposited to fabricate a thin film capacitor with YDH layer as dielectric film thereby employing Al-YDH-Si capacitor structure. The results indicate that the capacitance of the films decrease with increasing film thickness. A detailed analysis of the electrical characteristics of YDH films is presented.

Synthetic Asphaltene As A Novel Dye In Dye Sensitized Solar Cells Dsscs, Hassan Sharif

Open Access Theses & Dissertations

This dissertation approves the possibility of the first time use of synthetic asphaltene as new dye in dye sensitized solar cells. In which the conversion efficiency of synthetic asphaltene DSSC has improved up to 2.0 %. Synthetic asphaltene sample was prepared from the starting material as in literature and applied for various solar cell parameters of TiO2 based dyesensitized solar cell DSSC. DSSCs were fabricated using the synthetic asphaltene as dye. Different variables and parameters were carried out to test the photovoltaic performance of the cells, these parameters include open-circuit voltage, short-circuit current; fill factor. The first result was obtained …

Pressure And Heat Flux Effects On The Heat Transfer Characteristics Of Liquid Methane, Chance Paul Garcia

Open Access Theses & Dissertations

The heat transfer effects on liquid methane are investigated with the use of a carbo-thermal rig at the Center for Space Exploration Technology Research (cSETR) located at the University of Texas at El Paso (UTEP). The cSETR carbo-thermal rig design approach is presented along with the design of a methane condensing mobile unit (MCMU) to supply the laboratory and rig with liquid methane. The proposed research will generate useful insight in to heat transfer coefficient behavior, non-dimensional correlations, different flow conditions, varied inlet conditions, and varied heat flux for a subscale test article applicable to a regenerative cooled rocket engine …

Investigation Of The Radiative Heat Release Factor Of Premixed Oxy-Syngas Flames, Martin De La Torre

Open Access Theses & Dissertations

A significant part of the United States is being powered by combustion devises relying on coal since it is abundant and is a high emitting source of electricity per unit energy, however; the burning of this fuel is responsible for a significant contribution for the pollutant emissions causing global warming. Because coal is one of the main sources of energy in the U.S. and around the globe, the scientific community has been investigating ways to meet current and future governmental emission requirements. It is now well established that radiating heat from the flame is a major contributor of the heat …

An Evaluation Of The Cerro Process As An Efficient Ro Concentrate Management System, Guillermo Guadalupe Delgado

Open Access Theses & Dissertations

The Concentrate Enhanced Recovery Reverse Osmosis (CERRO) Process is a new method to treat RO concentrate and brackish water with high concentrations of silica and calcium sulfate. Prior investigations have shown that the CERRO process can treat this kind of water without fouling or scaling the membranes, but the main factors that allow the system to operate in such conditions were not studied. The research presented here is an evaluation of the CERRO process as an efficient RO concentrate management system. The parameters of operation of the system were evaluated and improved. The precipitation of calcium sulfate was identified as …

Determinants Of Neighborhood Exposure To Extreme Heat: A Spatial Examination Of El Paso And Juárez, 2010, Faraj Mohamad Aboargob

Open Access Theses & Dissertations

Numerous studies have been conducted on the modification of local weather by the urban environment. In studying urban environmental effects on the urban heat island (UHI), researchers have investigated influences such as land use, vegetation density, topography, population density, and neighborhood socioeconomic status. Many studies have used data collected from field observations, while other studies relied solely on computer modeling. This Dissertation research used a spatial analysis approach, which has been less widely employed, to investigate neighborhood level biophysical, built environmental and socio-demographic determinants of the El Paso and Juárez UHI. The research utilized inexpensive data obtained from US and …

Preparation Of Cobalt/Nickel Molybdenum Sulfide Catalysts Supported By Aqueous Media Soluble Multi-Wall Carbon Nanotubes., Hassan Ahmad Bleibel

Open Access Theses & Dissertations

Multi-walled carbon nanotubes (MWCNTs) have been subjected to chemical treatment in order to introduce hydrophilic functional groups on their surfaces. These covalently bonded groups did enhance the solubility of MWCNTs in aqueous media as expected. Functionalized MWCNTs were characterized using FTIR, Raman spectroscopy, TGA, X-ray diffraction, dispersion test and TEM. Then, functionalized MWCNTs were incorporated in the hydrothermal synthesis method of transition metal sulfide catalysts (CoMo, NiMo, and Ethylenediamine-CoMo Sulfides). Catalysts were characterized using X-ray diffraction, TEM, SEM, N2 Gas adsorption-desorption, elemental analysis, and Hydrodesulfurization (HDS) reaction of dibenzothiophene (DBT). The objective was to study the functionalized MWCNTs' effect; being …

Urban Impact Of Dissolved Metals In The Paso Del Norte Segment Of The Rio Grande, Sumayeh Ahmad Freiwan

Open Access Theses & Dissertations

The Paso del Norte segment of the Rio Grande experiences two seasons per year; the (wet) irrigation season and the (dry) non-irrigation season. The goal of this study was to improve the understanding of occurrence and contribution of dissolved metals in this region during the non-irrigation season. The objectives of this study were to (1) evaluate the impact of anthropogenic sources of metals on the Rio Grande water quality during the non-irrigation season, and (2) estimate the metal loads carried by the flow to the downstream region of El Paso. In order to evaluate the surface water quality of the …

Reduced-Order Modeling Using Orthogonal And Bi-Orthogonal Wavelet Transforms, Miguel Hernandez Iv

Open Access Theses & Dissertations

It is well known that model reduction methods borrow techniques typically found in data compression, and current state-of-the-art techniques for data compression are based on the wavelet transform. Given these facts, it is surprising that model reduction using wavelets has not received much attention and has not been adequately addressed in the literature. This research seeks to determine if wavelets can be used for model reduction and if wavelet model reduction is a viable alternative to existing model reduction methods.

In this work we propose a novel method for model reduction using wavelets. Specifically, we introduce techniques for deriving wavelet …

Crystal Structure, Phase, And Optical Properties Of Yttrium-Doped Hafnium Oxide Nanocrystalline Thin Films, Alejandro Ortega

Open Access Theses & Dissertations

Yttrium-doped hafnium oxide (YDH) nanocrystalline films were produced by sputter-deposition at various substrate times and temperatures, to produce YDH films in a wide range of thicknesses, dYDH∼25 to 1100 nm. The deposition was made onto optical grade quartz and sapphire substrates. Samples deposited on sapphire were subject to post-deposition annealing (PDA) at various times (3-24 hr) and temperatures (1100 - 1500 °C). The effect of d[special characters omitted]YDH on the crystal structure, surface/interface morphology and optical properties of YDH films was investigated. X-ray diffraction analyses revealed the formation of monoclinic phase for relatively thin films (<150nm). The evolution towards stabilized cubic phase with increasing dYDH [special characters omitted]is observed. The scanning electron microscopy results indicate the dense, columnar structure of YDH films as a function of dYDH. Spectrophotometry analyses indicate that the grown YDH films are transparent and exhibit interference fringes. The band gap was found to be ∼ 5.60 eV for monoclinic YDH films while distinct separation and an increase in band gap to 6.03 eV is evident with increasing dYDH and formation cubic YDH films. The PDA films band gaps were found to be between 5.31 and 5.72 eV, all of which exhibit secondary gaps. A correlation between growth conditions, annealing, phase evolution, and optical properties of the YDH nanocrystalline thin films is established.

Efficient, Scalable, Parallel, Matrix-Matrix Multiplication, Enrique Portillo

Open Access Theses & Dissertations

For the past decade, power/energy consumption has become a limiting factor for large-scale and embedded High Performance Computing (HPC) systems. This is especially true for systems that include accelerators, e.g., high-end computing devices, such as Graphics Processing Units (GPUs), with terascale computing capabilities and high power draws that greatly surpass that of multi-core CPUs. Accordingly, improving the node-level power/energy efficiency of an application can have a direct and positive impact on both classes of HPC systems.

The research reported in this thesis explores the use of software techniques to enhance the execution-time and power-consumption performance of applications executed on a …

A Systematic Approach To Manage Missing Data In Pavement Management Systems, Mazin M. Al-Zou'bi

Open Access Theses & Dissertations

Pavements are an important part of the highway transportation infrastructure, accounting for the largest share of the overall investment. A tremendous amount of time and money is spent each year on the construction of new pavements, as well as on the maintenance and rehabilitation of existing pavements.

Transportation agencies use pavement management systems (PMS) for their maintenance and rehabilitation planning, programming, and budgeting. PMS are used to make decisions regarding when maintenance and rehabilitation should be applied. The systems also select what type of treatment should be applied for each pavement section in the network with clear estimations of the …

A Block Operator Splitting Method For Heterogeneous Multiscale Poroelasticity, Paul M. Delgado

Open Access Theses & Dissertations

Traditional models of poroelastic deformation in porous media assume relatively homogeneous material properties such that macroscopic constitutive relations lead to accurate results. Many realistic applications involve heterogeneous material properties whose oscillatory nature require multiscale methods to balance accuracy and efficiency in computation.

The current study develops a multiscale method for poroelastic deformation based on a fixed point iteration based operator splitting method and a heterogeneous multiscale method using finite volume and direct stiffness methods. To characterize the convergence

of the operator splitting method, we use a numerical root finding algorithm to determine a threshold surface in a non-dimensional parameter space …

A Case Study Towards Verification Of The Utility Of Analytical Models In Selecting Checkpoint Intervals, Michael Joseph Harney

Open Access Theses & Dissertations

As high performance computing (HPC) systems grow larger, with increasing numbers of components, failures become more common. Codes that utilize large numbers of nodes and run for long periods of time must take such failures into account and adopt fault tolerance mechanisms to avoid loss of computation and, thus, system utilization. One of those mechanisms is checkpoint/restart. Although analytical models exist to guide users in the selection of an appropriate checkpoint interval, these models are based on assumptions that may not always be true. This thesis examines some of these assumptions, in particular, the consistency of parameters like Mean Time …

Optimization Of Biomass Logistics System Using Genetic Algorithm And Particle Swarm Optimization For Biofuel Production, Ethel Regina Martinez-Schabez

Open Access Theses & Dissertations

As time goes by, Renewable Energy keeps proving to be an important and potential replacement for fossil fuels. All the different types of Renewable Energy offer a relief to the environmental aftermaths of the prolonged reliance on fossil fuel energy. Bioenergy is one of the types of Renewable Energy that can help by minimizing the emissions of fossil fuels. The Energy Independence and Security Act mandates the use of 21 billion gallons of advanced biofuels including 16 billion gallons of cellulosic biofuels by the year 2022. Biomass and Biofuels can clearly become a significant aid to sustainably supply energy in …

Geochemical Characterization Of Mineral Dust Sources In The Chihuahuan Desert And Southern High Plains Regions, Porfirio Peinado

Open Access Theses & Dissertations

The Chihuahuan Desert (northern Chihuahua, southern New Mexico, and far west Texas) and the southern High Plains (west Texas and eastern New Mexico) regions have been identified as one of the most persistent dust producing regions of North America. Regional-scale dust storms have been observed by satellite imagery to identify sources of dust, resulting in collection and examination of physical soil samples to better understand the source signatures (geochemical characteristics) of dust origins in these two regions.

The soil characteristics were examined through several techniques: Particle Size Distribution, X-Ray Diffraction (XRD), Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES), and Total …

Purification Of Sodium Sulfate By Crystallization, Perla Teresita Torres

Open Access Theses & Dissertations

Sodium sulfate can be recovered from a dilute solution by concentrating it by conventional water treatment techniques like reverse osmosis and electrodialysis; however, those processes also concentrate impurities like arsenic. The sodium sulfate would have commercial use if it can be recovered in an arsenic-free form. This study demonstrated that sodium sulfate could be separated from impurities using slow cooling crystallization in a novel apparatus developed and designed during the experimentation. This device is called a heat exchanger crystallizer and allows slow cooling crystallization in order to grow pure crystals of sodium sulfate decahydrate. Crystals grown in the heat exchanger …

An Approach To Power Efficiency Determination In The Solar Energy Systems Using Central Composite Design And Box-Behnken Design, Juan Venegas Mendez

Open Access Theses & Dissertations

We are living in an industrialized world that relies on fossil fuels. The ways, in which these fossil fuels have damaged the earth, in special the environment is worth of special attention and corrective actions. In our days, the climate change (global warming) it is becoming the number one topic. These changes are affecting our health, comfort and our way of living. Solar systems have been working among us since several years, but the truth is that most of us really don't understand how they work and more important, how they work in time in different conditions. Solar panels are …

Recovering Magnesium Hydroxide And Sodium Chloride From Zero Discharge Desalination Concentrate Streams, Alemayehu Asfaw Yetayew

Open Access Theses & Dissertations

UTEP and Veolia Water Solutions & Technologies have been demonstrating and commercializing the Zero Discharge Desalination (ZDD) technology as part of a three year project sponsored by the U.S. Bureau of Reclamation. ZDD is able to achieve up to 98% recovery by desalinating brackish groundwater. ZDD is typically comprised of a reverse osmosis (RO) or nanofiltration (NF) system and a unique variation of electrodialysis called electrodialysis metathesis (EDM). The ZDD technology increases the yield of fresh water from water supplies that contain enough CaSO4 to cause precipitation problems when the water is treated with RO or NF alone. The EDM …