Physical Sciences and Mathematics Commons^™

Hydrodynamic Modeling Of The Green Bay Of Lake Michigan Using The Environmental Fluid Dynamics Code, Paula Estefania Cedillo

Theses and Dissertations

In this project we created a hydrodynamic model of the Lower Green Bay of Lake Michigan in Wisconsin, United States using the Visual Environmental Fluid Dynamics Code (EFDC). The model includes four tributary rivers to Lower Green Bay as well as the open boundary flow conditions at Chambers Island. This case study is used to: 1) compare the results obtained with a previous study of Lower Green Bay to validate the creation of the model 2) examine the hydrodynamics of the bay, and 3) create a framework for future studies at Lower Green Bay. The Geographic Information used to build …

Production And Harvest Of Microalgae In Wastewater Raceways With Resource Recycling, Alexander Colin Roberts

Master's Theses

Microalgae can be grown on municipal wastewater media to both treat the wastewater and produce feedstock for algae biofuel production. However the reliability of treatment must be demonstrated, as well as high areal algae productivity on recycled wastewater media and efficient sedimentation harvesting. This processes was studied at pilot scale in the present research.

A pilot facility was operated with nine CO₂-supplemented raceway ponds, each with a 33-m² surface area and a 0.3-m depth, continuously from March 6, 2013 through September 24, 2014. The ponds were operated as three sets of triplicates with two sets continuously fed …

Alkali-~Activated Fly Ash Binders: Feasibility As A Sustainable Alternative To Ordinary Portland Cement For Pre-~Cast Systems, Kimberly Sierra

UNLV Theses, Dissertations, Professional Papers, and Capstones

Fresh, load-dependent, transport, and durability properties of alkali-activated fly ash mortars were studied. The influences of activator concentration, solution-to-binder ratio, curing condition, activator type, and sodium silicate-to-total solution ratio on the properties of the studied alkali-activated mortars were examined. This study was divided in two phases. The first phase dealt with the use of sodium hydroxide as the sole activator. The second phase of the study was divided into two parts, both of which used a combination of sodium hydroxide and sodium silicate as the activator solution. Part I of phase II used elevated temperature curing conditions, whereas part II …

Evaluation Of Low-Cost Low Impact Development Practices In Southwest Florida For The Control Of Urban Runoff, Laura Kathren Rankin

USF Tampa Graduate Theses and Dissertations

Stormwater management is required due to development and alteration of the natural environment. It is heavily regulated in Florida and at the national level. Over the last two decades, Low Impact Development (LID) has been promoted as a sustainable and environmentally friendly method of controlling urban runoff. Case studies, provided in Chapter 2, show that LIDs can restore watershed hydrology by balancing the water budget. The difference in runoff between pre-development and post-development appears to increase with soil perviousness. However, the potential for mitigating the impacts of urbanization through runoff reduction is also greater for pervious, sandy soils that dominate …

A Risk Assessment Of The Impacts Of Coastal Flooding And Sea Level Rise On The Existing And New Pump Stations 113, Norfolk, Va, David A. Pezza

Civil & Environmental Engineering Theses & Dissertations

The author assessed the risk to a wastewater pump station and a planned replacement located nearby due to coastal flooding and rising sea levels. The locations for the pump stations are in the Larchmont neighborhood by the Lafayette River tidal estuaries in Norfolk, Virginia. The Lafayette River is a tributary to the Elizabeth River, which flows to the Chesapeake Bay. The low-lying areas along the river are subject to coastal surges caused by tropical and extra-tropical storms that flood the bay.

The region is considered one of the urban areas most exposed to the accelerating rate of rising sea levels. …

Tropical Cyclone Wind Hazard Assessment For Southeast Part Of Coastal Region Of China, Sihan Li

Electronic Thesis and Dissertation Repository

Tropical cyclone (TC) or typhoon wind hazard and risk are significant for China. The return period value of the maximum typhoon wind speed is used to characterize the typhoon wind hazard and assign wind load in building design code. Since the historical surface observations of typhoon wind speed are often scarce and of short period, the typhoon wind hazard assessment is often carried out using the wind field model and TC track model. For a few major cities in the coastal region of mainland China, simple or approximated wind field models and a circular subregion method (CSM) have been used …

Development Of A Decision Support Framework For The Planning Of Sustainable Transportation Systems, Pankaj Maheshwari

UNLV Theses, Dissertations, Professional Papers, and Capstones

With the rapid increase in economic development throughout the world, there is stress on the resources used to support global economy, including petroleum, coal, silver, and water. Currently, the world is consuming energy at an unprecedented rate never seen before. The finite nature of such non-renewable natural resources as petroleum and coal puts pressure on the environmental system, and ultimately reduces the availability of resources for future generations. Hence, it is critical to develop planning and operational strategies that seek to achieve a sustainable use of existing natural resources.

With this motivation, this dissertation focuses to develop a decision support …

Accuracy Comparison Of Numerical Integration Algorithms For Real-Time Hybrid Simulations, Ganesh Anant Reddy

Civil & Environmental Engineering Theses & Dissertations

The use of accurate numerical integration algorithms is one of the key factors for a successful real-time hybrid simulation (RTHS). In RTHSs, explicit integration algorithms are preferred more than implicit methods since all calculations need to be completed within a given time step during simulation. Explicit methods require the use of effective stiffness and damping for experimental substructures, which are incorporated into the calculation of the integration parameters. In general, those values that are greater than the expected stiffness and damping of the experimental substructure are used to ensure the stability of simulation. If a rate-dependent and nonlinear experimental substructure …

Power Maximization Of A Three-Phase Hydrokinetic Turbine, Matthew Carleson

Senior Theses

As Earth`s expendable resources dwindle, the need for alternative, renewable energy sources grows. Out of this need, an old favorite source is rising in popularity: small water turbines. Water-driven turbines first began as a means for turning mills and eventually evolved into massive dams that can power whole regions. This project focused on the construction of, and testing the properties of, a small pico-hydro power turbine. By using compressed air to drive the turbine, a representation of the peak power output was measured, serving as a basis for determining the value of pico-power systems in regards to the world`s current …

Feasibility Study: The Evaluation Of Polymer Coatings To Prevent Weathering Of Weak Rocks, Lauren Distler

Senior Honors Projects, 2010-2019

The weathering and erosion of weak rocks along roadways can cause dangerous and potentially fatal rockfalls.   Various slope stabilization methods exist, but each presents a set of challenges and trade-offs.   The focus of the project is to understand the feasibility of utilizing of a polymerbased slope stabilization technique. Rock samples were collected along US Route 33 in Virginia and West Virginia, and preliminary tests were conducted to evaluate the absorption of water (% mass) and durability. The study evaluates three polymer options in regard to the following criteria: adhesion to rock, layer thickness, semi-permeability, insolubility, and non-toxicity. The polymer selection …

Decision Environments To Encourage More Sustainable Infrastructure Outcomes, Earl Shealy

All Dissertations

Physical infrastructure (i.e. roads, pipelines, airports, dams, landfills, and water treatment systems) contributes directly to sustainability outcomes such as energy and water use and climate changing emissions. The infrastructure built today will likely impact future generations for many years. Planning, design and development decisions about infrastructure are critical to the future performance of these systems. Such decisions about infrastructure are complex with multiple variables, alternative options, and design stages. To manage decisions that exceed cognitive capacity to consider all options, decision makers often create mental shortcuts (heuristics), and accompanied errors (biases). The potential cognitive biases when dealing with complex decisions …

Downward Model Development Of The Soil Moisture Accounting Loss Method In Hec-Hms: Revelations Concerning The Soil Profile, Jessica Holberg

Open Access Theses

Despite the fact that the soil profile is known to impact streamflow, most Curve Number (CN)-based models ignore subsurface processes. This study explores the influence of soil storage on peak flows. Two watersheds in flat, humid west-central Indiana were modeled using both the Natural Resources Conservation Service (NRCS) Curve Number and four versions of the Soil Moisture Accounting (SMA) loss methods in the United States Army Core of Engineers-developed (USACE) Hydrologic Engineering Center Hydrologic Modeling System (HEC-HMS). One watershed encompasses the Wabash and Tippecanoe Rivers' confluence; the other contains an ephemeral stream, Plum Creek. The CN-based model was developed using …

Spatial Analysis Of Passenger Vehicle Use And Ownership And Its Impact On The Sustainability Of Highway Infrastructure Funding, Matthew Volovski

Open Access Dissertations

Across the United States, the sustainability of highway funding is at risk due to increasing need and uncertainty in the factors that drive revenue. Past studies on highway funding sustainability have identified that the root cause of changing highway revenue are the shifts in social demographics and economic characteristics. Unfortunately, from the revenue perspective (the focus of this dissertation), the ability of previous research to account for these factors has been rather limited in two ways; first, the inability to accurately assess current regional vehicle use (a typical prerequisite for statistical modeling of highway revenues) due to difficulties associated with …

Modeling And Simulation Of Evacuation Plan For Hancock Stadium, Nirmal Neranjan Weerasekara

Theses and Dissertations

The goal of this study is to use Modeling and Simulation of Evacuation Plan (MSEP) to support management to execute proper evacuation plan in case of emergency at Hancock Stadium in Illinois State University. Analyses of the research literature and evacuation scenarios are used to build a simulation system that will connect a description of emergency and evacuation situation with its context. It shows how an evacuation plan actually functions. The results of the study will help safety managers to understand the current situations of evacuation according to the specific simulation scenarios. The evacuation simulation is categorized according to the …

Functional Characterization Of Green Sorption Media And Scaling Of Pilot Studies For Copper Removal In Stormwater Runoff, Cameron Houmann

Electronic Theses and Dissertations

Green adsorption media with the inclusion of renewable and recycled materials can be applied as a stormwater best management practice for copper removal. A green adsorption media mixture composed of recycled tire chunk, expanded clay aggregate, and coconut coir was physicochemically evaluated for its potential use in an upflow media filter. The results found that the use of the green adsorption media mixture in isolation or the coconut coir with an expanded clay filtration chamber could be an effective and reliable stormwater best management practice for copper removal. A suite of tests were conducted on the media mixture and the …

Double Vault Composting Latrines In Rural Paraguay : Feasible Construction And Optimal Use, Paul T. Pebler

Dissertations, Master's Theses and Master's Reports - Open

Water resource depletion and sanitation are growing problems around the world. A solution to both of these problems is the use of composting latrines, as it requires no water and has been recommended by the World Health Organization as an improved sanitation technology. However, little analysis has been done on the decomposition process occurring inside the latrine, including what temperatures are reached and what variables most affect the composting process. Having better knowledge of how outside variables affect composting latrines can aid development workers on the choice of implementing such technology, and to better educate the users on the appropriate …

Commercialization Of A Small, Lightweight, Low-Cost Seismic Borehole Receiver, Rachel Adams

Theses and Dissertations--Civil Engineering

Herein, conceptualization of a recently patented seismic borehole receiver and its components is developed for commercialization. The device is significantly cheaper, lighter, and smaller than existing technologies on the market. Additionally, it has the potential to achieve better seismic readings than its competitors via patented sensor-to-borehole coupling mechanism. It is the hope that the commercialization of this device will not only provide a more affordable alternative to engineers and geophysicists in the existing market, but the significant cost difference may open new seismic measurement opportunities in the developing world. Its compact size and light weight will increase mobility, allowing investigators …

Parameters Estimation Of Material Constitutive Models Using Optimization Algorithms, Kiswendsida Jules Kere

Williams Honors College, Honors Research Projects

Optimization Algorithms are very useful for solving engineering problems. Indeed, optimization algorithms can be used to optimize engineering designs in terms of safety and economy. Understanding the proprieties of materials in engineering designs is very important in order to make designs safe. Materials are not really perfectly homogeneous and there are heterogeneous distributions in most materials. In this paper, Self-OPTIM which is an inverse constitutive parameter identification framework will be used to identify parameters of a linear elastic material constitutive model. Data for Self-OPTIM will be obtained using ABAQUS simulation of a dog-bone uniaxial test. Optimization Algorithms will be used …

The Simulation & Evaluation Of Surge Hazard Using A Response Surface Method In The New York Bight, Michael H. Bredesen

UNF Graduate Theses and Dissertations

Atmospheric features, such as tropical cyclones, act as a driving mechanism for many of the major hazards affecting coastal areas around the world. Accurate and efficient quantification of tropical cyclone surge hazard is essential to the development of resilient coastal communities, particularly given continued sea level trend concerns. Recent major tropical cyclones that have impacted the northeastern portion of the United States have resulted in devastating flooding in New York City, the most densely populated city in the US. As a part of national effort to re-evaluate coastal inundation hazards, the Federal Emergency Management Agency used the Joint Probability Method …

Development Of An Automated Method For Identification Of Wet And Dry Channel Segments Using Lidar Data And Fuzzy Logic Cluster Analysis, Chris Rowney

Electronic Theses and Dissertations

Research into the use of LiDAR data for purposes other than simple topographic elevation determination, such as urban land cover classification and the identification of forest biomass, has become prominent in recent years. In many cases, alternative analysis methodologies conducted using airborne LiDAR data are possible because the raw data collected during a survey can include information other than the classically used elevation and coordinate points, the X, Y, and Z of the plane. In particular, intensity return values for each point in a LiDAR grid have been found to provide a useful data set for wet and dry channel …

Dynamic Behavior Of Operational Wind Turbines Considering Aerodynamic And Seismic Load Interaction, Mohammad-Amin Asareh

Doctoral Dissertations

"With the advancements in the wind energy production industry, the demand for a cost effective and safe design of wind turbine structures is growing rapidly. The wide deployment of wind turbines in locations with high seismic hazard has lead engineers to take into account a more comprehensive seismic design of such structures. In response to the need for a computational tool that can perform coupled simulations of wind and seismic loads, a seismic module has been developed for the publicly available National Renewable Energy Laboratory (NREL) code, FAST, at the first step of this research. This achievement allows engineers working …

Performance Analysis And Modelling Of Hybrid Photovoltaic-Thermal Solar Panels, Nicole C. Annis

Doctoral Dissertations

A photovoltaic-thermal (PVT) panel was constructed, tested, and modelled using both MATLAB and TRNSYS. During the experimental testing, which took place on the Missouri University of Science and Technology campus in Rolla, Missouri; two identical PVT panels were tested alongside two PV panels to gather an electrical baseline for comparison. Approximately 69 days’ worth of data were of data were collected during the summer of 2014. The PV electrical, PVT electrical, PVT thermal and PVT combined (electrical and thermal) efficiencies were 3.5-5.6%, 3.4-5.4%, 20.9-11.6%, and 24.3-17.0%, respectively.

A MATLAB program was developed using existing equations for one-dimensional, quasi-steady model of …

Advanced Sustainable Concrete Materials For Infrastructure Applications, Kaylea Ann Smith

Masters Theses

"This study was performed to examine the effects of cement replaced by high volumes of Class C fly-ash on durability characteristics of concrete up to 120 days. Specifically, this study investigates possibility of amending American Society for Testing and Materials (ASTM) to allow High Volume Fly-ash (HVFA) concrete to cure until later ages prior to testing instead of 28 days. Five mix designs were compared with varying fly-ash percentages from 0 to 70% (by total cementitious mass). No other additives were present in any of the five mix designs. Water-to-cementitious ratio (w/cm) and total cementitious material remained constant as 0.40 …

Mechanical Characteristics Of Organically Modified Fly Ash-Kaolinite Mixtures, Xin Kang

Doctoral Dissertations

"Fly ash is a hazardous waste material to the environment. Beneficial reuse of fly ash, however, brings economic and environmental benefits, i.e., decreases the cost of disposal, reduces greenhouse gas emission, and improves mechanical properties of construction materials. Due to the lack of pozzolanic properties, the reuse rate of Class F fly ash in geotechnical engineering is relatively low (ACAA 2013). In order to promote the effectiveness and sustainability of high volume reuse of class F fly ash in geotechnical engineering, biopolymers (Chitosan, and Xanthan gum) and synthetic polymers (Polyethylene Oxide, PEO) were used instead of the traditional stabilizers to …

Evaluation Of Key Geomechanical Aspects Of Shallow And Deep Geothermal Energy, Robert Alexander Caulk

Graduate College Dissertations and Theses

Geothermal energy has become a focal point of the renewable energy revolution. Both shallow and deep types of geothermal energy have the potential to offset carbon emissions, reduce energy costs, and stimulate the economy. Before widespread geothermal exploration and exploitation can occur, both shallow and deep technologies require improvement by theoretical and experimental investigations. This thesis investigated one aspect of both shallow and deep geothermal energy technologies. First, a group of shallow geothermal energy piles was modeled numerically. The model was constructed, calibrated, and validated using available data collected from full-scale in-situ experimental energy piles. Following calibration, the model was …