Open Access. Powered by Scholars. Published by Universities.®
Articles 1 - 6 of 6
Full-Text Articles in Life Sciences
The Effects Of Extrusion Processing Of Distillers Dried Grains With Solubles (Ddgs)-Based Yellow Perch (Perca Flavescens) Feeds, Ferouz Y. Ayadi, Kasiviswanathan Muthukumarappan, Kurt A. Rosentrater, Michael L. Brown
The Effects Of Extrusion Processing Of Distillers Dried Grains With Solubles (Ddgs)-Based Yellow Perch (Perca Flavescens) Feeds, Ferouz Y. Ayadi, Kasiviswanathan Muthukumarappan, Kurt A. Rosentrater, Michael L. Brown
Kurt A. Rosentrater
This study was conducted to investigate the production of balanced diets for juvenile yellow perch (Perca flavescens) feeds. Six isocaloric (~ 3.21 kcal/g), isonitrogenous (31.5% db) ingredient blends were formulated with 0, 10, 20, 30, 40, and 50% distillers dried grains with solubles (DDGS) at a feed moisture content of 60-65% db, with appropriate amounts of soybean meal, fish meal, vitamin and mineral mix. Extrusion cooking was performed using a laboratory-scale single screw extruder at a constant barrel temperature profile of 40ºC-90ºC-100ºC, and a constant screw speed of 230 rpm (24.1 rad/s). During processing the mass flow rate was determined, …
Extrusion Studies Of Aquaculture Feed Using Distillers Dried Grains With Solubles And Whey, Nehru Chevanan, Kasiviswanathan Muthukumarappan, Kurt A. Rosentrater
Extrusion Studies Of Aquaculture Feed Using Distillers Dried Grains With Solubles And Whey, Nehru Chevanan, Kasiviswanathan Muthukumarappan, Kurt A. Rosentrater
Kurt A. Rosentrater
Three isocaloric (3.5 kcal/g) ingredient blends containing 20, 30, and 40% distiller-dried grains with solubles (DDGS) along with 5% whey were prepared with a net protein content adjusted to 28% (wet basis [wb]). Other ingredients in the blends included soy flour, corn flour, fish meal, vitamin, and mineral mix. These blends were extruded in a single-screw extruder at 15, 20, and 25% (wb) moisture content and at 130 and 160 rpm screw speeds. Compared to previous research, the durability and unit density of the extrudates in this study were found to increase substantially by the addition of whey to the …
Effects Of Ingredients And Extrusion Parameters On Properties Of Aquafeeds Containing Ddgs And Corn Starch, Kurt A. Rosentrater, Kasiviswanathan Muthukumarappan, S. Kannadhason
Effects Of Ingredients And Extrusion Parameters On Properties Of Aquafeeds Containing Ddgs And Corn Starch, Kurt A. Rosentrater, Kasiviswanathan Muthukumarappan, S. Kannadhason
Kurt A. Rosentrater
Isocaloric (3.05 kcal g-1) ingredient blends were factorially formulated using 3 levels each of DDGS (20, 25 and 30% db), protein (30, 32.5 and 35% db) and feed moisture content (25, 35 and 45% db), along with appropriate quantities of corn starch, soybean meal, fish meal, whey, vitamin and mineral mix to produce a balanced diet for tilapia feed. The ingredient blends were extruded using a laboratory-scale single screw extruder with varying screw speeds (100, 150 and 200 rpm) and extruder barrel temperatures (100, 125 and 150°C). The resulting extrudates were subjected to extensive analyses of physical properties, which included …
Performance Characteristics Of Nile Tilapia (Oreochromis Niloticus) Fed Diets Containing Graded Levels Of Fuel-Based Distillers Dried Grains With Solubles, Travis W. Schaeffer, Michael L. Brown, Kurt A. Rosentrater
Performance Characteristics Of Nile Tilapia (Oreochromis Niloticus) Fed Diets Containing Graded Levels Of Fuel-Based Distillers Dried Grains With Solubles, Travis W. Schaeffer, Michael L. Brown, Kurt A. Rosentrater
Kurt A. Rosentrater
A feeding trial was performed to investigate levels of corn-based Distillers Dried Grains with solubles (DDGS), a co-product of fuel ethanol manufacturing, used as a nutrient source for juvenile Nile tilapia (Oreochromis niloticus). Three isocaloric (15.7±0.7 MJ kg-1 dry matter), isonitrogenous (29.6±1.0% crude protein) experimental diets were formulated to contain 20, 30 and 40% DDGS; a commercial diet containing fishmeal was used as a reference diet. Glass aquaria (110 L) were stocked with Nile tilapia (mean weight = 6.7 g) with four replicates per diet. Weight gains, conversion ratios and hepatosomatic indices did not significantly differ between fish fed 20% …
Effects Of Ingredients And Extrusion Parameters On Aquafeeds Containing Ddgs And Tapioca Starch, S. Kannadhason, Kasiviswanathan Muthukumarappan, Kurt A. Rosentrater
Effects Of Ingredients And Extrusion Parameters On Aquafeeds Containing Ddgs And Tapioca Starch, S. Kannadhason, Kasiviswanathan Muthukumarappan, Kurt A. Rosentrater
Kurt A. Rosentrater
Isocaloric (3.05 kcal g-1) ingredient blends were factorially formulated using three levels each of DDGS (20, 25 and 30% db), protein (30, 32.5 and 35% db) and feed moisture content (25, 35 and 45% db), along with appropriate quantities of tapioca starch, soybean meal, fish meal, whey, vitamin and mineral mix to produce a balanced diet for tilapia feed. The ingredient blends were extruded using a laboratory-scale single screw extruder with varying screw speeds (100, 150 and 200 rpm) and extruder barrel temperatures (100, 125 and 150°C). The resulting extrudates were subjected to extensive analyses of physical properties, which included …
Effects Of Ingredients And Extrusion Parameters On Aquafeeds Containing Ddgs And Potato Starch, Kurt A. Rosentrater, Kasiviswanathan Muthukumarappan, S. Kannadhason
Effects Of Ingredients And Extrusion Parameters On Aquafeeds Containing Ddgs And Potato Starch, Kurt A. Rosentrater, Kasiviswanathan Muthukumarappan, S. Kannadhason
Kurt A. Rosentrater
Isocaloric (3.05 kcal g-1) ingredient blends were factorially formulated using three levels each of DDGS (20, 25 and 30% db), protein (30, 32.5 and 35% db) and feed moisture content (25, 35 and 45% db), along with appropriate quantities of potato starch, soybean meal, fish meal, whey, vitamin and mineral mix to produce a balanced diet for tilapia feed. The ingredient blends were extruded using a laboratory-scale single screw extruder with varying screw speeds (100, 150 and 200 rpm) and extruder barrel temperatures (100, 125 and 150°C). The resulting extrudates were subjected to extensive analyses of physical properties, which included …