Open Access. Powered by Scholars. Published by Universities.®

Life Sciences Commons

Open Access. Powered by Scholars. Published by Universities.®

Articles 1 - 3 of 3

Full-Text Articles in Life Sciences

Seasonal Aeration Rates For The Eastern United States Based On Long-Term Weather Patterns, Michael D. Montross, Samuel G. Mcneill, Thomas C. Bridges Sep 2004

Seasonal Aeration Rates For The Eastern United States Based On Long-Term Weather Patterns, Michael D. Montross, Samuel G. Mcneill, Thomas C. Bridges

Biosystems and Agricultural Engineering Faculty Publications

Most aeration fans are sized to produce a minimum airflow rate of 0.1 m3/min/t (0.1 cfm/bu) in on-farm grain storage structures. At this airflow rate a significant amount of time is required to move a cooling front completely through a bin. The desired grain temperature and prevailing weather conditions will have a significant effect on required fan size. Thirty years of weather data were analyzed for the eastern United States to determine the amount of time available in temperature windows between 0 to 15.C and 0 to 17.C. Contour maps were generated with ArcMap 8.3 for the percentage …


Vertical Wall Loads In A Model Grain Bin With Non-Axial Internal Inserts, Marek Molenda, Michael D. Montross, Jozef Horabik, Sidney A. Thompson Sep 2004

Vertical Wall Loads In A Model Grain Bin With Non-Axial Internal Inserts, Marek Molenda, Michael D. Montross, Jozef Horabik, Sidney A. Thompson

Biosystems and Agricultural Engineering Faculty Publications

A study was conducted to estimate the degree of load asymmetry in a bin with non-axial internal inserts. Internal inserts in the form of an annulus segment were attached to the wall, and their influence on vertical wall loads during centric filling and discharge in a model bin were measured. Wall and floor loads were measured in a corrugated-wall model grain bin with a diameter of 2.44 m and a height of 7.3 m filled with soft red winter wheat to a depth of 6.7 m (height-to-diameter ratio of 2.75). Tests were conducted with inserts that extended circumferentially 30°, 60°, …


Effect Of Moisture Content And Broken Kernels On The Bulk Density And Packing Of Corn, Samuel G. Mcneill, Sidney A. Thompson, Michael D. Montross Jul 2004

Effect Of Moisture Content And Broken Kernels On The Bulk Density And Packing Of Corn, Samuel G. Mcneill, Sidney A. Thompson, Michael D. Montross

Biosystems and Agricultural Engineering Faculty Publications

Shelled yellow dent corn samples were conditioned to three moisture content levels (12%, 15%, and 18% w.b.) and mixed with a prescribed amount of broken corn particles of known size (geometric mean diameter of 1.0, 1.4, 2.0, 2.8, and 4.0 mm) and concentration (2.5%, 5.0%, and 7.5% by weight) levels. The initial bulk density and grain compaction under simulated overburden pressure tests were determined for each sample. Uniaxial compression tests were performed for seven vertical pressure levels (3.4, 6.9, 14, 28, 55, 110, and 165 kPa) with a minimum of three replications each. Tests were performed at two locations with …