Mining Engineering Commons^™

Evaluation Of The 20 L Dust Explosibility Testing Chamber And Comparison To A Modified 38 L Vessel For Underground Coal, Robert Quentin Eades, Kyle A. Perry, Catherine E. Johnson, Jacob Miller

Mining Engineering Faculty Research & Creative Works

The phenomenon of combustible dust explosions is present within many industries. Tests for explosibility of dust clouds per ASTM E1226 use a 20 L explosive chamber that places the combustible dust directly below the dispersion nozzle which generates a thorough mixture for testing purposes. However, in the underground coal mining industry, there are a number of geologic, mining, and regulatory factors that change the deposition scheme of combustible coal dust. This causes the atmosphere of a coal mine to have a variable rock dust-coal dust mixture at the time of ignition. To investigate the impact of this variable atmosphere, a …

Explosive Dust Test Vessel Comparison Using Pulverized Pittsburgh Coal, Jacob Miller, Jay Schafler, Phillip R. Mulligan, Robert Eades, Kyle A. Perry, Catherine E. Johnson

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Explosions of coal dust are a major safety concern within the coal mining industry. The explosion and subsequent fires caused by coal dust can result in significant property damage, loss of life in underground coal mines and damage to coal processing facilities. The United States Bureau of Mines conducted research on coal dust explosions until 1996 when it was dissolved. In the following years, the American Society for Testing and Materials (ASTM) developed a test standard, ASTM E1226, to provide a standard test method characterizing the “explosibility” of particulate solids of combustible materials suspended in air. The research presented herein …

Additive Manufacturing Of Liners For Shaped Charges, Jason Ho, Cody Lough, Phillip R. Mulligan, Edward C. Kinzel, Catherine E. Johnson

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

A Shaped Charge (SC) is an explosive device used to focus a detonation in a desired direction, and has applications in oil extraction, weaponry and demolition. The focusing relies on a void in the explosive mass, shaped by a metal liner that becomes a super-heated projectile during detonation. Additive Manufacturing (AM) allows greater design freedom and geometric complexity for the liner portion of the SC. Specifically, hierarchical structuring and functional grading can potentially provide greater velocity, directionality, and efficiency. In this work, Selective Laser Melting (SLM) is used to explore different geometries for an SC liner made out of SS …

Nanometer Ultrastructural Brain Damage Following Low Intensity Primary Blast Wave Exposure, Hailong Song, Landry M. Konan, Jiankun Cui, Catherine E. Johnson, Graham K. Hubler, Ralph G. Depalma, Zezong Gu

Mining Engineering Faculty Research & Creative Works

Blast-induced mild traumatic brain injury (mTBI) is of particular concern among military personnel due to exposure to blast energy during military training and combat. The impact of primary low-intensity blast mediated pathophysiology upon later neurobehavioral disorders has been controversial. Developing a military preclinical blast model to simulate the pathophysiology of human blast injury is an important first step. This article provides an overview of primary blast effects and perspectives of our recent studies demonstrating ultrastructural changes in the brain and behavioral disorders resulting from open-field blast exposures up to 46.6 kPa using a murine model. The model is scalable and …

Holmium And Samarium Detectability In Post-Blast Residue, James Seman, Catherine E. Johnson, Carlos Henry Castano Giraldo

Mining Engineering Faculty Research & Creative Works

The creation of an identification taggant that survives detonation and can easily be recovered would prove invaluable in situations such as a terrorist attack where the explosives have been detonated and need to be traced by law enforcement. This paper shows that traces of two elements, samarium (Sm) and holmium (Ho), can be identified from explosive post-blast residue. This is the first step to creating a viable taggant system that survives detonation. The two elements were introduced to the explosive before detonation, and the post-blast residue was analyzed by neutron activation analysis (NAA). These data indicate the presence of these …

Detonation Synthesis Of Alpha-Variant Silicon Carbide, Martin Langenderfer, Catherine E. Johnson, William Fahrenholtz, Vadym Mochalin

Mining Engineering Faculty Research & Creative Works

A recent research study has been undertaken to develop facilities for conducting detonation synthesis of nanomaterials. This process involves a familiar technique that has been utilized for the industrial synthesis of nanodiamonds. Developments through this study have allowed for experimentation with the concept of modifying explosive compositions to induce synthesis of new nanomaterials. Initial experimentation has been conducted with the end goal being synthesis of alpha variant silicon carbide (α-SiC) in the nano-scale. The α-SiC that can be produced through detonation synthesis methods is critical to the ceramics industry because of a number of unique properties of the material. Conventional …

Multi-Auv Cooperative Target Hunting Based On Improved Potential Field In A Surface-Water Environment, Hengqing Ge, Guibin Chen, Guang Xu

Mining Engineering Faculty Research & Creative Works

In this paper, target hunting aims to detect target and surround the detected target in a surface-water using Multiple Autonomous Underwater Vehicles (multi-AUV) in a given area. The main challenge in multi-AUV target hunting is the design of AUV's motion path and coordination mechanism. To conduct the cooperative target hunting by multi-AUV in a surface-water environment, an integrated algorithm based on improved potential field (IPF) is proposed. First, a potential field function is established according to the information of the surface-water environment. Then, the dispersion degree, the homodromous degree, and district-difference degree are introduced to increase the cooperation of the …

The Status Of The Local Community In Mining Sustainable Development Beyond The Triple Bottom Line, Sisi Que, Liang Wang, Kwame Awuah-Offei, Yao Chen, Wei Yang

Mining Engineering Faculty Research & Creative Works

Mineral products provide essential fuels and raw materials for industrialization and our daily life, but their influences on other aspects of life need to be taken into consideration. While the whole world benefits from mining's contributions, most of the resulting detrimental impacts on the environment and society fall on the local communities. The participation of the local community is one solution to decrease the risks from community-related problems. Subsequently, the requirements of mining sustainable development can be met. A literature review was conducted on mining sustainability and stakeholder participation, and the shortcomings of existing research and difficulties of further study …

Study On The Effect Of Iron-Based Deoxidizing Inhibitors For Coal Spontaneous Combustion Prevention, Chaoyu Hao, Yanling Chen, Jiren Wang, Cunbao Deng, Guang Xu, Fengwei Dai, Rui Si, Hongfei Wang, Haoyu Wang

Mining Engineering Faculty Research & Creative Works

To improve the prevention of spontaneous coal combustion, reduced iron powder and other ingredients should be added together to form an iron-based deoxidizing inhibitor, with the dual effect of oxygen consumption and inhibition. The oxygen consumption rate of the inhibitor was studied through experiments. According to the theory of coordination resistance, the coordination resistance of Fe³⁺ was studied via the density functional method. Subsequently, a comparative experiment of the effects on spontaneous coal combustion was conducted. The research shows that several kinds of common resistance agents that are added to the reduced iron powder can consume oxygen. However, the …

Focus Energy Determination Of Mining Microseisms Using Residual Seismic Wave Attenuation In Deep Coal Mining, Mingwei Zhang, Shengdong Liu, Shuzhao Chen, Yanlong Chen, Guang Xu, Deyu Qian

Mining Engineering Faculty Research & Creative Works

Based on the energy attenuation characteristics of residual wave in deep rock, a method was developed to determine the microseismic focus energy. Differential energy loss in infinitesimal spreading distance is logically deduced, upon which energy attenuation equation was established. With a logarithmic transformation, a linear relation of the residual seismic energy with distance is formulated. Its intercept was used to determine the microseismic focus energy. The result is compared with that determined by the energy density method. The reliability of the determined focus energy and the impact of the built-in velocity threshold on the residual wave energy computation are discussed. …

Imaging And Mitigating Karst Features, Kenneth Joseph Bansah

Doctoral Dissertations

"Over the last three years, a comprehensive subsurface investigation that combines both conventional and geophysical techniques has been conducted near Springfield in southwest Missouri, United States. This study, which forms part of the comprehensive subsurface investigation, aimed to (1) image and characterize the subsurface, (2) map variations in engineering properties of soil/rock, (3) map variable depth to top of rock, (4) explore the utility of the geophysical techniques, (5) determine the factors contributing to karst processes, and (6) propose karst mitigation. Electrical resistivity tomography (ERT) and multichannel analysis of surface waves (MASW) were employed for the acquisition of subsurface geophysical …

Mitigation Of Environmental Hazards Of Sulfide Mineral Flotation With An Insight Into Froth Stability And Flotation Performance, Muhammad Badar Hayat

Doctoral Dissertations

"Today's major challenges facing the flotation of sulfide minerals involve constant variability in the ore composition; environmental concerns; water scarcity and inefficient plant performance. The present work addresses these challenges faced by the flotation process of complex sulfide ore of Mississippi Valley type with an insight into the froth stability and the flotation performance. The first project in this study was aimed at finding the optimum conditions for the bulk flotation of galena (PbS) and chalcopyrite (CuFeS₂) through Response Surface Methodology (RSM). In the second project, an attempt was made to replace toxic sodium cyanide (NaCN) with the biodegradable chitosan …

Computational Dynamics And Virtual Dragline Simulation For Extended Rope Service Life, Muhammad Wardeh

Doctoral Dissertations

"The dragline machinery is one of the largest equipment for stripping overburden materials in surface mining operations. Its effectiveness requires rigorous kinematic and dynamic analyses. Current dragline research studies are limited in computational dynamic modeling because they eliminate important structural components from the front-end assembly. Thus, the derived kinematic, dynamic and stress intensity models fail to capture the true response of the dragline under full operating cycle conditions. This research study advances a new and robust computational dynamic model of the dragline front-end assembly using Kane's method. The model is a 3-DOF dynamic model that describes the spatial kinematics and …

Management Of Coal Dust Explosions In United States' Coal Mines Using Bag Type Passive Explosion Barriers, Jay Robert Schafler

Masters Theses

"The most significant and powerful hazard that exists in an underground coal mine is a coal dust explosion. A coal dust explosion has the potential to propagate throughout a mine resulting in massive damage to the mine and equipment, as well as tragic loss of life. An assessment of current global regulations and practices uncovered four main control methods utilized to prevent coal dust explosions in coal mines world-wide. The United States is one of the few countries that does not regulate or employ all four of these safety practices. Additionally, a review of past research into coal dust explosions …

The Effect Of Overloading On Reliability Of Wheel Loader Structural Components, Eric Raymond Achelpohl

Doctoral Dissertations

"This research attempts to provide a fundamental understanding into the relationship between the productivity of material handling equipment, specifically wheel loaders, and their ability to operate reliably when subjected to high overload conditions. The overall aim is to determine the effect of overloading the bucket on wheel loader reliability. The specific objectives of the research are to: 1) evaluate the effect of overloading the bucket on wheel loader productivity; 2) examine the effect of overloading the bucket on hydraulic pressures in the hoist cylinders (used as a proxy for forces on a wheel loader); and 3) investigate the effect of …

A New Signal Processing Method For Acoustic Emission/Microseismic Data Analysis, Charles Mborah

Doctoral Dissertations

"The acoustic emission/microseismic technique (AE/MS) has emerged as one of the most important techniques in recent decades and has found wide applications in different fields. Extraction of seismic event with precise timing is the first step and also the foundation for processing AE/MS signals. However, this process remains a challenging task for most AE/MS applications. The process has generally been performed by human analysts. However, manual processing is time consuming and subjective. These challenges continue to provide motivation for the search for new and innovative ways to improve the signal processing needs of the AE/MS technique. This research has developed …

Calibration Of Mine Ventilation Network Models Using The Non-Linear Optimization Algorithm, Guang Xu, Jinxin Huang, Baisheng Nie, Duncan Chalmers, Zhuoming Yang

Mining Engineering Faculty Research & Creative Works

Effective ventilation planning is vital to underground mining. To ensure stable operation of the ventilation system and to avoid airflow disorder, mine ventilation network (MVN) models have been widely used in simulating and optimizing the mine ventilation system. However, one of the challenges for MVN model simulation is that the simulated airflow distribution results do not match the measured data. To solve this problem, a simple and effective calibration method is proposed based on the non-linear optimization algorithm. The calibrated model not only makes simulated airflow distribution results in accordance with the on-site measured data, but also controls the errors …

Correlation Between Delay Time And Measured Concentration And Concentration Uncertainty By Neutron Activation Analysis, James Thomas Seman

Doctoral Dissertations

"For the last several decades, it has been apparent that new methods of identifying explosives can help investigators trace their origins. One way to identify an explosive is through the use of taggants: materials added to a product that encodes information about the product such as when it was manufactured.

This research investigates the survivability of a new identification taggant called the Nuclear Barcode that overcomes some of the downfalls that have been identified in prior taggants. The Nuclear Barcode encodes information as a unique combination of concentrations of rare earths (Ho, Eu, Sm, Lu, and Dy) and precious metals …

Dragline Excavation Simulation, Real-Time Terrain Recognition And Object Detection, Godfred Somua-Gyimah

Doctoral Dissertations

"The contribution of coal to global energy is expected to remain above 30% through 2030. Draglines are the preferred excavation equipment in most surface coal mines. Recently, studies toward dragline excavation efficiency have focused on two specific areas. The first area is dragline bucket studies, where the goal is to develop new designs which perform better than conventional buckets. Drawbacks in the current approach include operator inconsistencies and the inability to physically test every proposed design. Previous simulation models used Distinct Element Methods (DEM) but they over-predict excavation forces by 300% to 500%. In this study, a DEM-based simulation model …

Discrete Element And Artificial Intelligence Modeling Of Rock Properties And Formation Failure In Advance Of Shovel Excavation, Muhammad Waqas

Doctoral Dissertations

"Rock tests are performed before the start of every mining or civil engineering project as part of a detailed feasibility study. The feasibility study is costly and it comprises drilling, sample collection, sample handling and laboratory testing. Numerical modeling techniques, such as Particle Flow Code (PFC), can be used to provide reliable estimates of rock strength values. The numerical models for unconfined compressive strength (UCS), direct tension, and Brazilian tests were developed in PFC, and validated using data from literature. A particle size range of 3-5 mm with D_max/D_min = 1.67 gave the best results. The numerical …