Mining Engineering Commons^™

Are Natural Fractures In Sandstone Reservoir: Water Wet – Mixed Wet – Or Oil Wet?, Salah Almudhhi, Laila Abdullah, Waleed Al-Bazzaz, Saleh Alsayegh, Hussien Alajaj, Ralph E. Flori

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

This study accurately measures the wettability contact angle of native Kuwaiti sandstone reservoir that hosts mixed pore size distributions in both the tight sandstone matrix as well as the natural fracture (NF) embedded in it. Also, this study, effectively, investigates the geometrical size and shape of natural available voids whether matrix voids or NF voids captured in the rock 2D image frame system. Correspondingly, this study is, successfully, measure tight matrix, NF Pore wall, and NF pore opening wettability performance and recovery efficiency contributions inside the sandstone reservoir. A model pore/ grain contact angle wettability is generated. Therefore, this study …

A Novel Technique For The Quantitative Determination Of Wettability Of A Severely Heterogeneous Tight Carbonate Reservoir, Saleh Al-Sayegh, Ralph E. Flori, Waleed Al-Bazzaz, Abdulaziz Abbas, Ali Qubian, Hasan Al-Saedi

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The objective of this study is to accurately measure the wettability contact angle of a cretaceous carbonate reservoir in a vertical well set-up known for as an unconventional tight carbonate oil reservoir. Also, to investigate the relative heterogeneity of these samples using digitally captured images; these images accurately capture natural pore-system in this carbonate rock samples and their wettability performance attributed towards building a vertical depth wettability/heterogeneity model. To capture, measure and model natural tight matrix static contact angle wettability in order to understand their new physics that will advance unconventional tight oil reservoir characterization. Entire vertical well depth reservoir …

Practical Imaging Applications Of Wettability Contact Angles On Kuwaiti Tight Carbonate Reservoir With Different Rock Types, Saleh Al-Sayegh, Ralph E. Flori, Waleed Al-Bazzaz, Sohaib Kholosy, Hasan Al-Saedi, Abdulaziz Abbas, Ali Qubian

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

This study focuses on a tight carbonate reservoir which is located in Northern Kuwait and is classified as an unconventional reservoir. A practical imaging technique of wettability contact angle (θ°) presents "big data" as well as relative-permeability (Krw and Kro) measurements. Also, modeling, through rock image technology, the vast well-documented grain/pore boundary morphology available inside fresh rock fragments have achieved good results. Conventional laboratory relative-permeability experiments are expensive and time-consuming. This study introduces a novel method to measure/calculate relative permeability through fast, less expensive, non-destructive, and environmentally friendly techniques of imaging technology. One tight carbonate reservoir is selected, imaged, processed, …

Investigating Pore Body, Pore Throat, Nano-Pore Wettability Preference In Several Unconventional Kuwaiti Carbonate Reservoirs, Saleh Al-Sayegh, Ralph E. Flori, Hussain Alajaj, Waleed Hussien Al-Bazzaz

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

This study will investigate measuring the wettability contact angles of native unconventional tight carbonate as well as other unconventional pore system reservoir samples that hosts varied pore shapes and subsequent wettability contact angle distributions in both reservoir matrix and possible natural fractures. Also, the investigation will include validation of the grain/ pore-wall wettability regions and classify the natural wettability preference available inside pores of the rock and their overall wettability performance and recovery efficiency contributions. Further investigation will include modeling pore throat contact angle wettability, and to understand their new physics that will advance reservoir characterization and oil recovery improvement.

Kuwaiti Carbonate Reservoir Oil Recovery Prediction Through Static Wettability Contact Angle Using Machine Learning Modeling, Saleh Al-Sayegh, Ralph E. Flori, Waleed Hussien Al-Bazzaz, Hasan Al-Saedi, Mostafa Al-Kaouri, Ali Qubian

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The objective of this study is to predict EOR efficiencies through static wettability contact angle measurement by Machine Learning (ML) modeling. Unlike conventional methods of measuring static wettability contact angle, the unconventional digital static wettability contact angle is captured and measured, then (ML) modeled in order to forecast the recovery based on wettability distribution phenomenon. Due to success in big data collection from reservoir imaging samples, this study applies data science lifecycle logic and utilizes Machine Learning (ML) models that can predict the recovery through wettability contact angles and thus identify the treatment of oil recovery for a candidate reservoir. …

Findings Report: Virtual Workshop On ‘Resilient Supply Of Critical Minerals’, Marek Locmelis, Angela D. Lueking, Michael S. Moats, Kwame Awuah-Offei, Lana Z. Alagha, Mark W. Fitch, Alanna Krolikowski, Shelby Clark

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Executive Summary
On August 2-3, 2021, the Thomas J. O’Keefe Institute for Sustainable Supply of Strategic Minerals at Missouri University of Science and Technology (Missouri S&T) hosted the NSF-funded virtual workshop ‘Resilient Supply of Critical Minerals’. The workshop was convened via Zoom and attracted 158 registrants, including 108 registrants from academia (61 students), 30 registrants from government agencies, and 20 registrants from the private sector. Four topical sessions were covered:

A. Mineral Exploration and Source Diversification.
B. Supply Chain and Policy Issues.
C. Improving Mineral Recycling and Reprocessing Technologies.
D. Technological Alternatives to Critical Minerals.

Each topical session was composed …

Explosive Dust Test Vessel Comparison Using Pulverized Pittsburgh Coal, Jacob Miller, Jay Schafler, Phillip R. Mulligan, Robert Eades, Kyle A. Perry, Catherine E. Johnson

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Explosions of coal dust are a major safety concern within the coal mining industry. The explosion and subsequent fires caused by coal dust can result in significant property damage, loss of life in underground coal mines and damage to coal processing facilities. The United States Bureau of Mines conducted research on coal dust explosions until 1996 when it was dissolved. In the following years, the American Society for Testing and Materials (ASTM) developed a test standard, ASTM E1226, to provide a standard test method characterizing the “explosibility” of particulate solids of combustible materials suspended in air. The research presented herein …

Percussive Penetration Of Unconsolidated Granular Media In A Laboratory Setting, Leslie S. Gertsch

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

This controlled study examined the feasibility of a simple percussive approach to drilling through unconsolidated regolith deposits on Mars. The experiments showed that the approach is feasible at the low power levels and low confining pressures used, and that the rate of impact is more important to the penetration rate than is the mass of the impactor (hammer). More massive impactors tend to lower energy efficiency, as they do in terrestrial pile-driving. Unexpectedly, penetration plotted against applied energy tends to cluster into parallel linear trends. Within a given cluster, penetration is very sensitive to applied energy, while between clusters, the …

Effect Of Water Ice Content On Excavatability Of Lunar Regolith, Leslie S. Gertsch, Robert Gustafson, Richard E. Gertsch

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The amount of water ice contained within prepared samples of JSC-1 lunar regolith simulant strongly affects the excavatability of the material. As part of a NASA Phase I SBIR project, load-penetration testing of JSC-1 lunar regolith simulant was performed at water ice concentrations ranging from zero to 11% by mass (approximately saturated), after compaction and cooling to simulate probable lunar conditions. After mixing dry JSC-1 simulant with the appropriate amount of water, the samples were individually compressed into containment rings under 48 MPa of pressure. Thermocouples embedded in the samples monitored internal temperature while they were cooled in a bath …

Assessment Of Engineering Mechanics Instructional Multimedia In A Variety Of Instructional Settings, Richard H. Hall, Nancy Hubing, Timothy A. Philpot, Ralph E. Flori, Vikas Yellamraju

Business and Information Technology Faculty Research & Creative Works

Students from Ten Schools, Representing Seven Countries, Used Interactive Multimedia as a Part of their Engineering Statics Classes. the Software Consisted of Four Modules, Which Focused On: Mohr's Circle; Centroid and Moment of Inertia; Stress Transformation; and Structural Analysis. the Students Completed On-Line Surveys About their Experience with the Software. Analysis of the Results Indicated that Students Rated their Knowledge of the Subject Matter Covered in the Software as Increasing Significantly as a Consequence of using the Software. However, This Increase Was Substantially More Pronounced for Students in U.S. Schools. Students Rated the Software as Significantly More Effective Than their …

Interactive Learning Tools: Animating Statics, Nancy Hubing, David B. Oglesby, Timothy A. Philpot, Vikas Yellamraju, Richard H. Hall, Ralph E. Flori

Business and Information Technology Faculty Research & Creative Works

Computer-Based Modules for Engineering Instruction Must Be Concise, Flexible, Educational and Engaging in Order to Effectively Supplement Traditional Classroom Teaching Tools. a Computer Example that Takes More Time Than a Chalkboard Presentation is Not Likely to Be Useful in Today's Engineering Classroom. Flexible Navigation is Necessary So that the Instructor Can Quickly and Easily Respond to Student Questions. Useful Modules Must Also Improve Problem-Solving Skills or Clarify Troublesome Concepts in Order to Be Considered Worthy of Inclusion in the Limited Class Time Available. Finally, and Perhaps Most Importantly, Effective Computer-Based Modules Must Meet the Challenge of Holding the Student's Attention. …