Open Access. Powered by Scholars. Published by Universities.®
Articles 1 - 12 of 12
Full-Text Articles in Engineering
Detailed Modeling Of A Thermoelectric Generator For Maximum Power Point Tracking, Hayati̇ Mamur, Yusuf Çoban
Detailed Modeling Of A Thermoelectric Generator For Maximum Power Point Tracking, Hayati̇ Mamur, Yusuf Çoban
Turkish Journal of Electrical Engineering and Computer Sciences
Thermoelectric generators (TEGs) are used in small power applications to generate electrical energy from waste heats. Maximum power is obtained when the connected load to the ends of TEGs matches their internal resistance. However, impedance matching cannot always be ensured. Therefore, TEGs operate at lower efficiency. For this reason, maximum power point tracking (MPPT) algorithms are utilized. In this study, both TEGs and a boost converter with MPPT were modeled together. Detailed modeling, simulation, and verification of TEGs depending on the Seebeck coefficient, the hot/cold side temperatures, and the number of modules in MATLAB/Simulink were carried out. In addition, a …
Research On Power-Frequency Electromagnetic Interference Model Of Multicore Twisted Signal Cable Of High-Speed Railway, Bowen Zhang, Jiangjian Xie, Zhixin Wang, Jin Yang, Hao Yan
Research On Power-Frequency Electromagnetic Interference Model Of Multicore Twisted Signal Cable Of High-Speed Railway, Bowen Zhang, Jiangjian Xie, Zhixin Wang, Jin Yang, Hao Yan
Turkish Journal of Electrical Engineering and Computer Sciences
With the increase in the traction power of high-speed railways, the power-frequency electromagnetic interference of traction current to the signal cables becomes increasingly more severe. In this paper, the calculation model of the magnetic interference to signal cable was established on the MATLAB/Simulink platform based on the multiconductor transmission line theory. This model took SPTYWPL03-8B 8-core twist signal cable as an example and the power-frequency interference of external current to the signal cable was analyzed theoretically. In addition, experiments on electromagnetic interference of double-ended and single-ended signal cables were performed to validate the simulation model. Experiments showed that the relative …
A New Semianalytical Method For Analysis Of The Disc-Type Permanent Magnethysteresis Motor In Steady-State Operational Conditions, Ali Behniafar, Ahmad Darabi
A New Semianalytical Method For Analysis Of The Disc-Type Permanent Magnethysteresis Motor In Steady-State Operational Conditions, Ali Behniafar, Ahmad Darabi
Turkish Journal of Electrical Engineering and Computer Sciences
Considering the characteristics of hysteresis and permanent magnet motors, it seems that these two motors are complements of each other. Thus, their combination yields a motor with an excellent performance. In order to preserve the major advantages of both motors in the new motor, a disc-type slotless structure is chosen. This paper presents a new finite-element method for the modeling of disc-type permanent magnet hysteresis synchronous (PMHS) motor. In this modeling method a new iterative algorithm is used. Programming software has been linked to finite- element software because of its limitation in the modeling of hysteresis phenomena. Validity of the …
Rlgc(F) Modeling Of A Busbar Distribution System Via Measured S-Parameters Atcenelec And Fcc Bands, Zeynep Hasirci, İsmai̇l Hakki Çavdar, Mehmet Öztürk
Rlgc(F) Modeling Of A Busbar Distribution System Via Measured S-Parameters Atcenelec And Fcc Bands, Zeynep Hasirci, İsmai̇l Hakki Çavdar, Mehmet Öztürk
Turkish Journal of Electrical Engineering and Computer Sciences
This paper addresses the extraction of accurate frequency-dependent per-unit-length RLGC parameters for busbar distribution systems using measured S-parameters for the CENELEC and FCC bands. A busbar is a distribution system element (three phase, low voltage) with a modular structure that carries electrical energy in buildings. The S-parameters of a busbar distribution system at different current levels (630 A, 1250 A, 2000 A) are measured with a vector network analyzer and then analyzed for three different two-port connections (L1-N, L2-N, L3-N). A frequency- dependent RLGC(f) model is used to characterize the busbar as a transmission line using a derivative-free optimization algorithm. …
Stability Assessment Of Isolated Six-Phase Induction Generator Feeding Static Loads, Kiran Singh, Girish Kumar Singh
Stability Assessment Of Isolated Six-Phase Induction Generator Feeding Static Loads, Kiran Singh, Girish Kumar Singh
Turkish Journal of Electrical Engineering and Computer Sciences
This paper presents the stability analysis of a six-phase self-excited induction generator (SP-SEIG) based on the eigenvalue stability criteria for its linearized model. This demonstrates the small signal stability behavior during steady-state operating conditions. The eigenvalue approach also establishes an opportunity to correlate eigenvalues with machine parameters. The investigation in this paper reveals that the eigenvalues are dependent upon the machine parameters, and the most critical parameter is the variation in magnetizing inductance (L$_{m})$. The eigenvalues are varied in accordance with the machine variables and give focus to the stabilization of the SP-SEIG. A particular voltage build-up phenomenon is also …
Modeling And Rotor Field-Oriented Control Of A Faulty Three-Phase Induction Motor Based On Gsa For Tuning Of Pi Controllers, Ali Monadi, Mohammad Jannati, Nik Rumizi Nik Idris, Ahmad Athif Mohd Faudzi, Frede Blaabjerg
Modeling And Rotor Field-Oriented Control Of A Faulty Three-Phase Induction Motor Based On Gsa For Tuning Of Pi Controllers, Ali Monadi, Mohammad Jannati, Nik Rumizi Nik Idris, Ahmad Athif Mohd Faudzi, Frede Blaabjerg
Turkish Journal of Electrical Engineering and Computer Sciences
modeling and a rotor field-oriented control (RFOC) system for controlling a faulty three-phase induction motor (three-phase IM when one of the phases is disconnected). In the adapted scheme for controlling the faulty IM, it is necessary for the PI controller coefficients to change. For this purpose, the gravitational search algorithm (GSA) is used for tuning of PI controllers. The results show the strength and ability of the technique to improve the performance of the faulty IM control.
Design And Implementation Of A New Manet Simulator Model For Aodv Simulation, Si̇nan Tüncel, Hüseyi̇n Eki̇z, Ahmet Zengi̇n
Design And Implementation Of A New Manet Simulator Model For Aodv Simulation, Si̇nan Tüncel, Hüseyi̇n Eki̇z, Ahmet Zengi̇n
Turkish Journal of Electrical Engineering and Computer Sciences
No abstract provided.
Adaptive Network-Based Inference System Models On Multiband Patch Antenna Design, Erdem Demi̇rci̇oğlu, Murat Hüsnü Sazli, Orhan Şengül, Şehabeddi̇n Taha İmeci̇, Hakki Alparslan Ilgin
Adaptive Network-Based Inference System Models On Multiband Patch Antenna Design, Erdem Demi̇rci̇oğlu, Murat Hüsnü Sazli, Orhan Şengül, Şehabeddi̇n Taha İmeci̇, Hakki Alparslan Ilgin
Turkish Journal of Electrical Engineering and Computer Sciences
In this study, an adaptive network-based fuzzy inference system (ANFIS) for multiband microstrip patch antenna (MMPA) modeling is proposed. The MMPA includes a single patch with inverted L-shaped stubs on the edges. The antenna production process needs iterative runs of the electromagnetic (EM) simulator, fabricating and testing the simulated antenna to find the optimum geometry. Production processes (design, simulation, fabrication, and testing) and the cost computation time add to the overall manufacturing expenses. A computer-aided modeling approach using the ANFIS is developed and trained with data acquired from the EM simulators, Sonnet Suites and AWR AXIEM, and measurement data. The …
Design Of A Double-Stator Linear Switched Reluctance Motor For Shunting Railway Channels, El Manaa Barhoumi, Mansour Hajji, Boujemaa Ben Salah
Design Of A Double-Stator Linear Switched Reluctance Motor For Shunting Railway Channels, El Manaa Barhoumi, Mansour Hajji, Boujemaa Ben Salah
Turkish Journal of Electrical Engineering and Computer Sciences
This paper presents the design and modeling of a double-stator linear switched reluctance motor for motorizing a railway channels' shunting system. The magnetic behavior of this actuator is nonlinear due to the saturation and nonlinear magnetization curves of the materials used in this actuator. For this reason, the electromagnetic quantities such as force, flux linkage, and inductance are calculated with the finite element method using the Maxwell tool. The obtained results are presented and discussed. In order to elaborate some control strategies, a new model for the proposed actuator, based on the flux and force characteristics, is validated by the …
Foster Impedance Data Modeling Via Singly Terminated Lc Ladder Networks, Meti̇n Şengül
Foster Impedance Data Modeling Via Singly Terminated Lc Ladder Networks, Meti̇n Şengül
Turkish Journal of Electrical Engineering and Computer Sciences
In this work, a lossless model is developed for the given Foster impedance data. In the model, a 2-port short- or open-terminated LC ladder is used. After applying the proposed algorithm, a realizable driving-point reactance function that fits the given data is obtained. Next, this function is synthesized, resulting in the desired model. In the algorithm, there is no need to select a circuit topology for the model. Two examples are given to illustrate the utilization of the proposed modeling algorithm.
Simulation Of A Large Electric Distribution System Having Intensive Harmonics In The Industrial Zone Of Konya, Hasan Eroğlu, Musa Aydin
Simulation Of A Large Electric Distribution System Having Intensive Harmonics In The Industrial Zone Of Konya, Hasan Eroğlu, Musa Aydin
Turkish Journal of Electrical Engineering and Computer Sciences
In this study, measurements were taken at different points of a sample distribution system in order to analyze the levels of harmonics that appear as a day-to-day increasing problem in electrical distribution systems. According to the measurement values, the dominant harmonics have been determined and an electrical model of the system has been prepared using the SimPowerSystems toolbox from MATLAB and Simulink. The accuracy of the electrical model has been verified by the measurement and simulation values. In addition, the transformer connection types' and impedances' simulations have been presented to understand and solve the harmonic problems in electrical distribution systems. …
Model Of A Photovoltaic Panel Emulator In Matlab-Simulink, Hayretti̇n Can
Model Of A Photovoltaic Panel Emulator In Matlab-Simulink, Hayretti̇n Can
Turkish Journal of Electrical Engineering and Computer Sciences
Being able to behave electrically similar to photovoltaic (PV) panels, PV emulator systems make it possible to perform different PV system tests under various operation conditions. In this paper, a model of a PV panel emulator is presented using the Power System Blockset under MATLAB-Simulink. The simulation of the emulator system is developed for testing a controller prior to a real-time implementation. The model can handle the dependence of all of the parameters in the model with respect to solar radiation and temperature. The simulation results show that the output characteristics of the simulator have good agreement with those of …