Engineering Commons^™

Data Center Power System Emulation And Gan-Based High-Efficiency Rectifier With Reactive Power Regulation, Jingjing Sun

Doctoral Dissertations

Data centers are indispensable for today's computing and networking society, which has a considerable power consumption and significant impact on power system. Meanwhile, the average energy usage efficiency of data centers is still not high, leading to significant power loss and system cost.

In this dissertation, effective methods are proposed to investigate the data center load characteristics, improve data center power usage efficiency, and reduce the system cost.

First, a dynamic power model of a typical data center ac power system is proposed, which is complete and able to predict the data center's dynamic performance. Also, a converter-based data center …

Theoretical Analysis Of Experimental Data Of Sodium Diffusion In Oxidized Molybdenum Thin Films, Orlando Ayala, Benjamin Belfore, Tasnuva Ashrafee, John Akwari, Grace Rajan, Shankar Karki, Deewakar Poudel, Sylvain Marsillac

Engineering Technology Faculty Publications

In this work, the diffusion process of sodium (Na) in molybdenum (Mo) thin films while it was deposited on soda lime glass (SLG) was studied. A small amount of oxygen was present in the chamber while the direct-current (DC) magnetron sputtering was used for the deposition. The substrate temperatures were varied to observe its effect. Such molybdenum films, with or without oxidations, are often used in thin film solar cells, either as back contact or as hole transport layers. Secondary ion mass spectrometry (SIMS) was used to quantify the concentration of the species. A grain diffusion mechanistic model incorporating the …

Modeling And Optimization Algorithm For Sic-Based Three-Phase Motor Drive System, Ren Ren

Doctoral Dissertations

More electric aircraft (MEA) and electrified aircraft propulsion (EAP) becomes the important topics in the area of transportation electrifications, expecting remarkable environmental and economic benefits. However, they bring the urgent challenges for the power electronics design since the new power architecture in the electrified aircraft requires many benchmark designs and comparisons. Also, a large number of power electronics converter designs with different specifications and system-level configurations need to be conducted in MEA and EAP, which demands huge design efforts and costs. Moreover, the long debugging and testing process increases the time to market because of gaps between the paper design …

Energy Harvesting Using Flextensional Piezoelectric Energy Harvesters In Resonance And Off-Resonance Modes, Mohamed A. Shabara

Mechanical & Aerospace Engineering Theses & Dissertations

Energy harvesting technologies are integrated into various modern devices and systems. These systems include Artificial Intelligence (AI) systems, Internet of Things (IoT), various types of energy harvesters are integrated in many engineering applications such as automotive, aerospace and ocean engineering. In order to develop a fully functioning stand-alone system, it is essential to integrate it with a built in power source such as a battery or a power generator. Also, in many situations, city power sources might not be available. Therefore, reliable, renewable and sustainable local power generators are desired. Piezoelectric energy harvesting (PEH) technologies, which are piezoelectric material-based devices, …

Linear Quadratic Optimal Control For A Cascaded Converters-Based Microgrid, Amlam Niragire

Graduate Theses and Dissertations

There is a constant transformation of the electric grid due to an ongoing interest in the deployment of renewable energy resources and electric microgrid formation. This transformation, though advantageous in many ways, poses great challenges for the energy industry and there must be a constant improvement in modeling, simulation, analysis and control techniques in order to characterize and optimize the system design and operation. In this light, the scope of this thesis is focused on developing a linear model, analyzing the stability and designing an optimal linear quadratic regulator (LQR) for a microgrid system. The microgrid system used is inspired …

Optimized Sizing And Placing Of Distributed Energy Resources (Ders) In An Island Microgrid Using Der-Cam, Bhuwan B. Bastola

Electrical and Computer Engineering ETDs

The electric grid at La Gomera, an island in the Canary archipelago, has been the subject of interest in optimized integration of Distributed Energy Resources (DERs) primarily because of high distribution losses and concerns about complying with emission regulations. Consequently, the utility that operates the island power system wishes to mitigate the problem with installation of renewable and distributed energy sources like PV and battery, which is the focus of this research.

Specifically, the focus of this thesis is to use Distributed Energy Resource - Customer Adoption Model (DER-CAM) to optimize the installation of PV and battery in terms of …

Modeling, Simulation And Control Of Hybrid Electric Vehicle Drive While Minimizing Energy Input Requirements Using Optimized Gear Ratios, Sanjai Massey

Dissertations, Master's Theses and Master's Reports

This project was conducted to analyze (model and simulate) and optimize an electric motor based drive system to propel a typical passenger vehicle in an urban driving environment. Although there are many HEV and EV type systems on the market today, this paper chose the Toyota Prius HEV system as a baseline using a brushless AC motor.

Although a vehicle can be driven many ways, a more standardized Urban Dynamometer Driving Schedule, UDDS, was chosen to simulate real driving conditions. This schedule is determined by the US Environmental Protection Agency, EPA, and is intended to represent the city driving conditions …

Saturable Reactor For Power Flow Control In Electric Transmission Systems: Modeling And System Impact Study, Marcus Aaron Young Ii

Doctoral Dissertations

A Saturable Reactor for Power Flow Control (SRPFC) is a novel application of a concept well known to electronics and power electronics engineers that provides continuous modulation of line reactance by controlling the magnetization in a ferromagnetic core. The novelty of the SRPFC is the target application, which is power flow control in meshed electric power networks. Modulation of the line impedance occurs by altering the current in a DC winding to control the magnetization of the ferromagnetic core, thereby varying the reactance of the AC winding. The deployment of power system equipment, like SRPFC, requires careful planning and study …

A Dc Distribution System For Power System Integration Of Plug-In Electric Vehicles; Modeling, Stability And Operation, Mansour Tabari

Electronic Thesis and Dissertation Repository

This thesis is mainly focused on (i) modeling of dc distribution systems for power system integration of plug-in electric vehicles (PEVs), (ii) proposing a method to enhance the stability of the dc distribution systems, and (iii) proposing an energy management strategy to control the power flow in the dc distribution system. The dc distribution system is expected to be more efficient and economical than a system of ac-dc battery chargers directly interfaced with an ac grid.

In the first part, a systematic method for developing a model for a dc distribution system, based on the configuration of the system is …

Multifrequency Averaging In Power Electronic Systems, Fei Pan

Theses and Dissertations--Electrical and Computer Engineering

Power electronic systems have been widely used in the electrical power processing for applications with power levels ranging from less than one watt in battery-operated portable devices to more than megawatts in the converters, inverters and rectifiers of the utility power systems. These systems typically involve the passive elements such as inductors, capacitors, and resistors, the switching electronic components such as IGBTs, MOSFETS, and diodes, and other electronic circuits. Multifrequency averaging is one of the widely used modeling and simulation techniques today for the analysis and design of power electronic systems. This technique is capable of providing the average behavior …

Modeling Of Power Semiconductor Devices, Tanya Kirilova Gachovska

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

One of the requirements for choosing a proper power electronic device for a converter is that it must possess a low specific on-resistance. The specific on-resistance of a bipolar device is related to the base width and doping concentration of the lightly doped drift region. This means that the doping concentration and the width of the low-doped base region in a bipolar device must be carefully considered to achieve a desired avalanche breakdown voltage and on-resistance. In order to determine the technological parameters of a semiconductor device, a one dimensional analysis is used to calculate the minimum depletion layer width, …

Coupled Electromagnetic And Heat Transfer Model For Microwave Heating In Domestic Ovens, Krishnamoorthy Pitchai, Sohan Birla, Jeyamkondan Subbiah, D. D. Jones, Harshanardhan Thippareddi

Department of Food Science and Technology: Faculty Publications

Microwave ovens are used extensively for heating a variety of not-ready-to-eat food products. Non-uniform heating of foods in microwave ovens is a major concern in assuring microbiological safety of such products. The non-uniform heating of foods is attributed by complex interaction of microwaves with foods. To understand this complex interaction, a comprehensive model was developed to solve coupled electromagnetic and heat transfer equations using finite-difference time-domain based commercial software. The simulation parameters, cell size, heating time step, and number of iterations for steady state electromagnetic field were optimized. The model was validated by 30 s heating profile of a cylindrical …

Steady State Simulation Of Ysz Intermediate-Temperature Fuel Cell, Zi-Jing Lin, Ye Gu, Xiao-Hua Zhang

Journal of Electrochemistry

With a coupled 2D electrochemical and thermal modeling software, the characteristics of the steady state operation of the intermediate-temperature fuel cell with thin yttria-stabilized zirconia(YSZ) electrolyte was analyzed. The parameters of I-V equation were obtained from fitting the experiment results and the choice of grid points was determined by balancing the accuracy requirement and computational efficiency. The temperature fields at different operation circumstances such as flow designs, material choices for interconnect, were examined. The dependences of the output power and cell efficiency on the operating voltage at different temperatures were studied. Based upon the analysis of the temperature profile, it …