Engineering Commons^™

Computational And Experimental Determination Of The Mixing Efficiency Of A Microfluidic Serpentine Micromixer, Siril Arockiam

Theses

In microfluidics, efficiency and mixing time are the greatest disadvantages. These parameters hinder the application of microfluidic devices for biochemical and immunological assays. However, once these disadvantages have been overcome by optimizing the parameters of the microfluidic device, it becomes the important analytical tool. In this experiment, various designs of microfluidic devices have been both simulated using COMSOL software, and experimentally verified to obtain the optimized parameter such as depth and velocity for better mixing efficiency. The COMSOL model has been validated by comparing the results with fluorescent images data of the experiment. The microfluidic device is built with Adhesive …

Cell Laden Hydrogel Microspheres Using 3d Printed Microfluidics, Sanika Nitin Suvarnapathaki

Theses - ALL

Cell laden hydrogel microspheres using 3D printed microfluidics

Abstract

By

Sanika Suvarnapathaki

Current tissue engineering therapies use macro-scale three dimensional (3D) scaffolds to treat tissue defects surgically. Uneven cell seeding and oxygen and media perfusion cause low cell viability in these macro-scale scaffolds. Microencapsulation, a technique of encapsulating cells in biocompatible polymers or hydrogels, has the potential to address these key issues, and therefore this technology has been used for numerous healthcare applications over the last two decades. Cell microencapsulation in hydrogels that mimic the tissue physiology and biochemistry has made it possible to use natural hydrogels like gelatin methacrylate …

Improved Single Molecule Detection Platform Using A Buried Arrow Design, Thomas Allen Wall

Theses and Dissertations

As the microelectronics industry pushes microfabrication processes further, the lab-on-a-chip field has continued to piggy-back off the industry's fabrication capabilities with the goal of producing total chemical and biological systems on small chip-size platforms. One important function of such systems is the ability to perform single molecule detection. There are currently many methods being researched for performing single molecule detection, both macro and micro in scale. This dissertation focuses on an optofluidic, lab-on-a-chip platform called the ARROW biosensor, which possesses several advantages over macro-scale single molecule detection platforms. These advantages include an amplification-free detection scheme, cheap parallel fabrication techniques, rapid …

Three-Dimensional Microfluidic Tumor Vascular Model For Investigating Breast Cancer Metastasis, Anastasiia Vasiukhina, Brian H. Jun, Luis Solorio, Pavlos P. Vlachos

The Summer Undergraduate Research Fellowship (SURF) Symposium

Metastasis is one of the primary reasons for the high mortality rates in female patients diagnosed with breast cancer. It involves the migration of cancer cells into the circulatory system allowing for the dissemination of cancer cells in distal tissues. Understanding the major processes that occur in cells and tissues during metastasis can help improve currently existing therapeutic methods. In order to understand such mechanisms, developing physiologically relevant tissue models is crucial. Advancements in microfluidics have led to the fabrication of 3D culture models with shear stress gradients and flow control that can recapitulate aspects of the tumor microenvironment in …

Multi-Functional System For Biomedical Application Using Ac Electrokinetics, Rakesh Guduru

Theses and Dissertations

Manipulation of fluids in a small volume is often a challenge in the field of Microfluidics. While many research groups have addressed this issue with robust methodologies, manipulating fluids remains a scope of study due to the ever-changing technology (Processing Tools) and increase in the demand for “Lab-On-a-Chip” devices in biological applications. This thesis peruses the flow pattern of the orthogonal electrode pattern and circular electrode providing, examples of the flow patterns and the process micromixing. Characteristics of a multifunctional system were demonstrated using orthogonal electrode and circular electrode patterned device. Conductivity of the fluids were chosen such they reflect …

Custom 3d Printer And Resin For 18 Μm × 20 Μm Mi- Crofluidic Flow Channels, Hua Gong, Bryce P. Bickham, Adam T. Woolley, Gregory P. Nordin

Faculty Publications

While there is great interest in 3D printing for microfluidic device fabrication, to-date the achieved feature sizes have not been in the truly microfluidic regime (μm). In this paper we demonstrate that a custom Digital Light Processor stereolithographic (DLP-SLA) 3D printer and a specifically-designed, low cost, custom resin can readily achieve flow channel cross sections as small as 18 μm × 20 μm. Our 3D printer has a projected image plane resolution of 7.6 μm and uses a 385 nm LED, which dramatically increases the available selection of UV absorbers for resin formulation compared to 3D printers with 405 nm …

Poly Drop, Zachary T. Scott, Lilly J. Paul

Computer Engineering

Poly Drop is a software interface to control an Open Drop digital micro-fluidics system. We obtained a hardware system from Gaudi labs. Our task was to create a Graphical User Interface that made the control of the device easier and more automated for better testing. We created software that had 3 parts: a control GUI, arduino code to control the hardware, and Image Analysis that gives the user information such as location and color of liquid drops as they move across the electrode grid of the Open Drop system. The GUI was developed using Java Swing. The communication between the …

Roll-To-Roll Pilot Line For Large-Scale Manufacturing Of Microfluidic Devices, Martin Smolka, Anja Haase, Ursula Palfinger, Dieter Nees, Ladislav Kuna, Jan Hesse, Barbara Stadlober, Sascha. Geidel, Jörg Nestler, Nikolaus Ladenhauf, Andoni Rodriguez, Florian Hasenöhrl, Martin Eibelhuber, Max Sonnleitner, Guggi Kofod, Dan Kofoed, Jan Kafka, Isbaal Ramos, Manuel W. Thesen, Mirko Lohse, Ana Ayerdi, Nerea Briz

Single-use Technologies II: Bridging Polymer Science to Biotechnology Applications

Roll-to-roll (R2R) technologies with roller-based nanoimprinting methods enable manufacturing of highly cost-effective and large-scale sheets of flexible polymer film with precise structures on a micro- and nanoscale 1. Areas that can benefit strongly from such large scale technologies are microfluidics, biosensors, and lab-on-chip products for point of care diagnostics, drug discovery and food control. Here, R2R fabrication could greatly reduce production costs and increase manufacturing capacity with respect to currently used products. A pilot line with this technology is investigated in the European Horizon 2020 project R2R Biofluidics and its capabilities are tested on two Demonstrators: - Demonstrator 1: In-vitro …

Studies In Mesoscopics And Quantum Microscopies, Zhenghao Ding, Gabriel C. Spalding

Honors Projects

This thesis begins with a foundational section on quantum optics. The single-photon detectors used in the first chapter were obtained through the Advanced Laboratory Physics Association (ALPhA), which brokered reduced cost for educational use, and the aim of the single-photon work presented in Chapter 1 is to develop modules for use in Illinois Wesleyan's instructional labs beyond the first year of university. Along with the American Association of Physics Teachers, ALPhA encourages capstone-level work, such as Chapter 1 of this honors thesis, which is explicitly designed to play the role of passing on, to a next generation of physics majors, …

High-Throughput Functional System For Encapsulated Networks Of Model Cell Membranes, Mary-Anne Kim Anh Nguyen

Doctoral Dissertations

Synthetic lipid bilayers provide models of cell membranes to study biomolecular interactions and signal transduction. The droplet interface bilayer (DIB) is a highly versatile technique for assembling planar lipid membranes between water droplets in oil. The DIB method thus provides a unique capability for developing digital, droplet-based membrane platforms for rapid membrane characterization, drug screening and ion channel recordings. In this work, a new microfluidic system is presented that automates droplet generation, sorting, and sequential trapping in designated locations to enable rapid assembly of arrays of DIBs along with in situ electrical measurements. This platform provides repeatable processes for forming …

Jet Bounce In Low Gravity, Caleb Turner

Undergraduate Research & Mentoring Program

Liquid jets rebound (‘bounce’) from superhydrophobic surfaces when they impinge at oblique angles. We call this interesting phenomena ‘jet bounce’ and in this work we investigate the phenomena at large length scales in a reduced gravitational environment. For example, for water at Reynolds numbers 0 < Re < 3500 and surface normal Weber numbers 0 < We < 60 we characterize the response of the jets on the hydrophobic surface in the brief 2.1s micro-gravity environment achieved using a drop tower. It is observed that by varying jet velocity, flow rate, jet diameter, and incident angle we observe up to four distinct regimes of behavior. The various regimes may be targeted for specific applications and we demonstrate a variety of unique jet bounce behaviors for applications such as no-touch, no-contact fluid-thermal transport for spacecraft unit operations such as contaminated water processing, device cooling, and cryogenic fluids transport and management.

Stable jet bounce from small diameter jet ≈ 1 mm and low impact angle. Characterizing Reynolds number ≈ 900 and normal Weber number ≤ 10 allow jet bounce to rebound in non-destructive behavior.

Shear Driven Micro-Fluidic Pump For Cardiovascular Applications, Nihad E. Daidzic

Aviation Department Publications

A valveless shear-driven micro-fluidic pump design (SDMFP) for hemodynamic applications is presented in this work. One of the possible medical and biomedical applications is in-vivo hemodynamic (human blood circulation) support/assist. One or more SDMFPs can be inserted/implanted into vascular lumens in a form of a stent/duct in series and/or in parallel (bypass duct) to support blood circulation in-vivo. A comprehensive review of various micro-pump designs up to about mid 2000’s is given in [1,2]. Many of micropump designs considered are not suitable for in-vivo or even in-vitro medical/biomedical applications.

Operating principles, design, and SDMFP features are given in [3]. A …

Improvement Of Fluorescence-Based Microfluidic Dna Analyzers, Collin Tranter

Doctoral Dissertations

A tremendous effort continues in the development of micro-total-analysis-systems; in support of this, many chemical passivation methods have been developed to enhance the biocompatibility of such microfluidic systems. However, the suitability of these passivation techniques to many fluorescence-based assays still remains inconsistent. This part of this work is focused on the performance of a third generation intercalating DNA dye when used within microfluidic devices treated with a select variety of passivating coatings. The results of these tests indicate that passivation coatings which are intended to shed DNA based on electrostatic repulsion will in fact imbibe the fluorescent DNA intercalating dye …

Development Of Spectroscopic Methods For Dynamic Cellular Level Study Of Biochemical Kinetics And Disease Progression, Anna M. Sitarski

Electronic Theses and Dissertations

One of the current fundamental objectives in biomedical research is understanding molecular and cellular mechanisms of disease progression. Recent work in genetics support the stochastic nature of disease progression on the single cell level. For example, recent work has demonstrated that cancer as a disease state is reached after the accumulation of damages that result in genetic errors. Other diseases like Huntingtons, Parkinsons, Alzheimers, cardiovascular disease are developed over time and their cellular mechanisms of disease transition are largely unknown. Modern techniques of disease characterization are perturbative, invasive and fully destructive to biological samples. Many methods need a probe or …

Assessing Dprestin & Nadc1 (Indy) Interaction On Calcium Oxalate Crystal Formation In A Drosophila Model Of Kidney Stones, Jessica Lin

Undergraduate Research Symposium Posters

Calcium oxalate (CaOx) accounts for >70%of kidney stones, yet why CaOx stones form is poorly understood. While several factors contribute to the stone aggregation and growth, elucidating the roles of oxalate transporters can help demystify this phenomenon. Using a Drosophila model to study the formation and inhibition of CaOx crystals in the fly Malpighian tubule (MT), oxalate transport via dPrestin—the fly Slc26a6 Cl^-/Ox^2- exchanger was studied using both electrophysiology and MT dissection with CaOx birefringence assays. Here, the fly model suffices as it recapitulates renal oxalate excretion. Additionally, the mammalian dicarboxylate transporter NaDC1 (Indy in Drosophila) …

Magnetic Field Sensor Based On A Combination Of A Microfiber Coupler Covered With Magnetic Fluid And A Sagnac Loop, Fangfang Wei, Arun Mallik, Dejun Liu, Qiang Wu, Gang-Ding Peng, Gerald Farrell, Yuliya Semenova

Articles

This paper proposes a novel magnetic field sensor based on a microfiber coupler (MFC) combined with a magnetic fluid (MF) in a Sagnac loop formed from a polarization maintaining fiber (PMF). Thanks to the small (~2.6 μm) waist diameter of the MFC, the resulting interference is strongly influenced by the presence of the MF and this leads to the desirable high sensitivity of the structure to the applied magnetic field. The maximum magnetic field sensitivities of −100 pm/mT and −488 pm/mT have been experimentally demonstrated with the PMF lengths of 75 cm and 20 cm respectively in the range of …

Evaluation Of A Microfluidic Mixer Utilizing Staggered Herringbone Channels: A Computational Fluid Dynamics Approach, Brian Hama

ETD Archive

Microfluidic platforms offer a variety of advantages including improved heat transfer, low working volumes, ease of scale-up, and strong user control on parameters. However, flow within microfluidic channels occurs at low Reynolds numbers, which makes mixing difficult to accomplish. Adding V-shaped ridges to channel walls, a pattern called the staggered herringbone design (SHB), might alleviate this problem by introducing transverse flow patterns that enable enhanced mixing. However, certain factors affecting the SHB mixer’s performance remain largely unexplored.

In this work, a microfluidic mixer utilizing the SHB geometry was developed and characterized using computational fluid dynamics based simulations and complimentary experiments. …

Manufacturing Microfluidic Flow Focusing Devices For Stimuli Responsive Alginate Microsphere Generation And Cell Encapsulation, Michael A. Karasinski

Graduate College Dissertations and Theses

In this paper a novel stimuli responsive hydrogel material, methacrylated sodium alginate beta-cyclodextrin (Alg-MA-β-CD), was used in combination with a microfluidic device to create microspheres. Currently there is no reliable method for fabricating homogeneous stimuli-responsive microspheres, in-house microfluidic devices are not reliable in manufacture quality or long-term use. Alginate hydrogels have many attractive characteristics for bioengineering applications and are commonly used to mimic the features and properties of the extracellular matrix (ECM). Human mesenchymal stem cells (hMSCs) are of top interest to tissue engineers. hMSCs are widely available and can be harvested and cultured directly out of human bone marrow. …

Precise Flow-Control Using Photo-Actuated Hydrogel Valves And Pid-Controlled Led Actuation, Colm Delaney, Simon Coleman, Jeff Whyte, Nigel Kent, Dermot Diamond

Articles

Herein we demonstrate remarkable control of flow within fluidic channels using photo-actuated hydrogel valves. By polymerizing the valves in situ it has been possible to create highly reproducible valves. Through the use of an LED platform and a PID algorithm we have generated extremely accurate flow control and created prototype devices to document their potential application within the microfluidics field.

Improving Sensitivity Of Electrochemical Sensors With Convective Transport In Free-Standing, Carbon Nanotube Structures, Benjamin J. Brownlee, Kevin M. Marr, Jonathan C. Claussen, Brian D. Iverson

Faculty Publications

High-aspect-ratio, porous membrane of vertically-aligned carbon nanotubes (CNTs) were developed through a templated microfabrication approach for electrochemical sensing. Nanostructured platinum (Pt) catalyst was deposited onto the CNTs with a facile, electroless deposition method, resulting in a Pt-nanowire-coated, CNT sensor (PN-CNT). Convection mass transfer enhancement was shown to improve PN-CNT sensor performance in the non-enzymatic, amperometric sensing of hydrogen peroxide (H₂O₂). In particular, convective enhancement was achieved through the use of high surface area to fluid volume structures and concentration boundary layer confinement in a channel. Stir speed and sensor orientation especially influenced the measured current in …