Engineering Commons^™

Organic Fouling Mitigation In Forward Osmosis Technology Through The Use Of Oscilatting Alternating Current Electric Fields, Logan Werner

Graduate College Dissertations and Theses

Forward osmosis (FO) is the term given to osmosis in water filtration applications. FO has many advantages to conventional membrane filtration processes. The lack of external pressure needed to force solvent through the membrane is dramatically decreased in FO, resulting in a lower cost of operation compared to reverse osmosis. Lower external pressures also result in decreased fouling on the membrane surface and improved permeate flux. Fouling is one of the foremost challenges within the membrane filtration industry and is one of the biggest contributors to operating costs. While FO results in less fouling than RO, fouling remains a major …

Fabrication Of Alumina Membranes From Uv Resin– Alumina Particle Slurries, Dominique Henry Porcincula

Master's Theses

Ceramics membranes are made in a wide variety of different techniques using a wide variety of different materials. However, many of the common techniques utilize a slurry of ceramic particles, additives, and either organic solvent or water that is shaped into a membrane, left to dry, and then sintered together. Drying is a time consuming process, often requiring several hours for the liquid medium to evaporate. Defect formation caused by development of partial pressures across the drying membrane, including cracks and warpage, also typically occurs during the drying process. To address this, slurries of ceramic particles made with a low …

High-Yield Bioinspired Atmospheric Water Capture Through Hydrogels, Yiwei Gao

UNLV Theses, Dissertations, Professional Papers, and Capstones

Water scarcity is a global issue affecting billions of people, and atmospheric water harvesting (AWH) technology has been identified as a potential solution. However, existing single-material AWH approaches have limited water harvesting yields due to alternated water capture, storage, and release stages, and only function within a high relative humidity range. In my doctoral research project, we developed a bio-inspired, hydrogel-based multi-layer AWH approach that allows for segregated capture, storage, and release stages, and is envisioned to have higher daily water harvesting efficiency even in low-humidity areas. My research began with understanding the relations between hydrogel mechanical stiffness, hydraulic permeability, …

Enhancing Performance Of Gravity Driven Membranes For Water Purification In Small Rural Communities, Amr Ezzat Melligy Mr.

Theses and Dissertations

Due to the rapid population growth in Egypt, providing safe drinking water is becoming an ongoing challenge especially in rural scattered communities. It became more crucial than ever to find innovative and affordable solutions to purify water and reduce water-borne diseases. Ultrafiltration and micro-filtration membranes has been successful in large, centralized plants and is currently one of the popular solutions to provide high quality product water. However, using those membrane systems in rural areas is challenged by several parameters; among which are; the absence of skilled workers, stable energy sources and availability of chemicals. The goal of this thesis is …

Polyethersulfone Thin-Film Nanocomposite Membrane Embedded With Amine-Functionalized Graphene Oxide For Desalination Applications, Ahmed Bahaeldin

Theses and Dissertations

Thin-film nanocomposite (TFN) desalination membranes were prepared based on a polyethersulfone (PES) support, where the polyamide (PA) layer was embedded with amine-functionalized graphene oxide (GO). The effect of adding various concentrations of functionalized and un-functionalized GO on the desalination performance, hydrophilicity, and morphology of the membranes was additionally assessed throughout this work. Scanning electron microscopy (SEM) measurements were used to assess the morphology of the membranes in combination with Brunauer-Emmett-Teller (BET) analysis. Contact angle measurements were used to gauge the hydrophilicity of the synthesized membranes. The membrane with the best desalination performance contained 1x10^-3 wt/vol% of functionalized GO in …

Development Of A New Affinity Membrane For Rapidly Purifying Non-Antibody Proteins, Friendship Edioma

All Theses

This thesis project describes the modification and evaluation of a new affinity membrane for rapid chromatographic purification of non-antibody proteins. The affinity membrane utilizes Im7/CL7 coupling technology developed by Dr. Vassylyev's lab at the University of Alabama Birmingham (UAB), licensed by TriAltus Bioscience. The behavior of the membrane was evaluated using purified CL7-tagged Cas9 as my model protein for static and dynamic binding capacity analysis.

Chapter one provides an overview on biopharmaceutical drug production process development. I discuss how protein drugs are produced, isolated, and purified from the cell supernatant after upstream phases are completed. Despite increasing demands for biologics, …

Understanding The Interfacial Processes Of Reactive Nanobubbles Toward Agricultural Applications, Xiaonan Shi

Dissertations

There is a growing interest in nanobubble (NB) technology because of its diverse applications (e.g., detergent-free cleaning, water aeration, ultra-sound imaging and intracellular drug delivery, and mineral processing). NBs have a higher efficiency of mass transfer compared to bulk scale bubbles due to the high specific surface areas. The high specific surface also facilitates physical adsorption and chemical reactions in the gas liquid interface. Furthermore, the collapse of NBs creates shock waves and the formation of hydroxyl radicals (OH).

However, it remains elusive why or how NBs are stabilized in water and particularly, the states of internal pressures of NBs …

Defining Interactions Between Deformable Dna Origami And Lipid Bilayers Through Molecular Dynamics Simulation, Zachary A. Loyd

Chancellor’s Honors Program Projects

No abstract provided.

Quantification Of Slit-Like Pores Through Using Liquid Crystals As A Template, Dominique Savage

Chemical Engineering Undergraduate Honors Theses

The purpose of this research is to manufacture a membrane with slit-like pores to achieve particle filtration. Slit-like pore membranes are preferred over conventional membranes with cylindrical pores since slit-like pores have two length scales that can be manipulated to better control cut off and flux through the membrane. This project focuses on manufacturing slit-like pore membranes through the use of two liquid crystals, 1,4-bis[4-(6-acryloyloxyhexyloxy)benzoyloxy]-2-methylbenzene (RM257) and 4-Cyano-4′-pentylbiphenyl (5CB). This method for making slit-like pores has not been widely investigated nor has the morphology of the membrane pores and mechanical properties of such a membrane been addressed. It was found …

Experimental And Computational Studies Of Functionalized Carbon Nanotubes For Use In Energy Storage Devices And Membranes, Emine S. Karaman

Dissertations

Electrolytes with good interfacial stability are a crucial component of any electrochemical device. The development of novel gel polymer electrolytes (GEs) with good interface stability and better manufacturability is important for the development of the next generation electrochemical devices. Gel electrolytes are hybrid electrolyte materials, combining benefits of both liquid and solid systems. Compared with liquid and solid electrolytes, GEs open new design opportunities and do not require rigorous encapsulation methods. In this dissertation, studies on functionalized carbon nanotubes (fCNTs) and graphene oxide (GO) doped polyvinyl alcohol (PVA) based gel electrolytes (GEs) are reported. The ionic conductivity and mechanical strength …

Inherently Porous Atomically Thin Membranes For Gas Separation, Harpreet Atwal

Electronic Thesis and Dissertation Repository

Membranes made from atomically thin materials promise hundreds of times higher production rates than conventional polymer membranes for separation applications. Graphene is impermeable to gases but becomes selectively permeable once pores are introduced into it but creating trillions of nanopores over large areas is difficult. By instead choosing an inherently porous two-dimensional material with naturally identical pores repeated at high density, we may circumvent this challenge. In this work, we explore the potential of two candidate materials, 2D polyphenylene and graphdiyne. We synthesize cyclohexane-m-phenylene, a monomer of 2D polyphenylene. We then develop an atomic force microscopy technique for measuring the …

Computational Investigation Of Biological Membranes, Allyson Karmazyn

Theses - ALL

Lipids are the building blocks of biological membranes, and the types of lipids that compose these cellular envelopes influence the physicochemical properties of the chemicals that can enter or exit the cell across the membrane. This work focuses on the lipid membrane compositions of eukaryotic (red blood cells) and prokaryotic (Pseudomonas aeruginosa) membranes. By analyzing the lipid-lipid and lipid-protein interactions results of the computational simulations, insights into lipid aggregation, bilayer leaflet behavior, membrane asymmetry, and small molecule transport through protein channels were obtained. The differences between prokaryotic and eukaryotic cell membranes are qualitative known; however, this work provides these concepts …

Reducing The Fouling Of Microfiltration Membranes Through Uv-Initiated Surface Modifications Using Poly (Ethylene Glycol) Based Monomers, Christopher Lo, Matthew Truong

Materials Engineering

Meissner Filtration Product Inc. designs and manufactures membranes for food and beverage, microelectronics, ultrapure chemicals, and pharmaceutical industries. Membrane filters utilized in these industries have lifetimes greatly limited due to membrane fouling. Increasing membrane lifetime will reduce downtime, waste, and cost of operation. The proposed project is aimed to develop a methodology for synthesizing a fouling-resistant polymer coating layer on hydrophobic membrane surfaces for reducing membrane fouling and increasing membrane filterability (membrane lifetime) that are critical for effective membrane operations in the pharmaceutical industry. In this study, commercial membranes were coated with a solution containing a monomer, crosslinker, and photoinitiator …

Evaluation And Sizing Of Solar Powered Reverse Osmosis Water Desalination System, Sandip Subedi

Honors Theses

About 71 % of the surface of Earth is water, out of which around 2.5 % is freshwater. The majority of the surface of Earth is occupied by seawater which also contains dissolved salt. The salt concentration in seawater makes it toxic to humans because the human body is unable to get rid of the salt that comes from seawater. The demand for fresh water is increasing due to the rise in global population. In this context, desalinated seawater is considered as a viable resource to meet the growing demand for fresh water. Desalination process is highly energy intensive due …

The Effects Of Solution Condition On Virus Filtration Performance, Fnu Namila

Graduate Theses and Dissertations

Virus filtration is an integral part of the downstream purification of mammalian cell culture-derived biotherapeutics to assure the viral safety of the products. Virus filtration membranes remove viruses based on a size-exclusion mechanism. Commercial parvovirus filers possess unique membrane structure and are designed to remove smaller non-enveloped parvoviruses with size 18-26 nm. However, some filters face issues, such as pre-mature fouling, the decline of filtrate flux, and reduction in virus retention. This doctoral dissertation focused on identifying the factors that influence the filtrate flux and the virus retention capability of commercial virus filters. The effects of solution pH and ionic …

Optimization And Longevity Of Functionalized Multi-Walled Carbon Nanotube-Enabled Membranes For Water Treatment, Madeleine Michael Isabella White

Master's Theses

Water scarcity is a growing concern at the global scale. Large scale water reuse is growing both in necessity and popularity. Before water reuse can be performed efficiently on a large scale or be used for potable supply, even indirectly, contaminants of emerging concern (CECs) will need to be treated at the full scale. Advanced oxidation processes (AOPs) are a form of advanced water treatment capable of treating a wide range of CECs. This study contributes to the growing field of AOPs and more specifically AOPs using ozone combined with functionalized multi-walled carbon nanotubes (MWCNTs). Ozonation of MWCNTs has been …

Scale-Up Of Polyaniline Cellulose Membranes, Isaac Bodemann

Chemical Engineering Undergraduate Honors Theses

Polyaniline coated cellulose membranes show impressive conductive properties that may be used to innovate traditional charged separation techniques, such as electrodeionization. However, these membranes are not sold to consumers, so they cannot be easily integrated into such systems. This research focuses on the scale-up and development of positively charged anion exchange membranes to be used in EDI cells. Novel cellulose membranes were made using lab-specific cellulose. These membranes were then coated using a polyaniline technique adopted from a paper titled, “Flexible Electrically Conductive Nanocomposite Membrane Based on Bacterial Cellulose and Polyaniline." This paper details the methods used to add the …

Methods For Film Coating Electrospun Fibers, Kristopher Dejean

Williams Honors College, Honors Research Projects

Electrospinning uses high voltages to form polymer nanofiber membranes. These membranes have potential for use in filtration, tissue engineering, drug delivery, and catalysis. The nonwoven fiber mat is malleable but has a low tensile strength compared to a solid film of the same polymer. Joining the fibers with a thin film is desired to balance the strength and flexibility. Three methods of producing a film on fiber membrane were tested. The techniques are spraying then melting, spin coating, and dip coating. Electrospinning setup conditions, solvent ratios, damage to fibers, and spin coating speeds were determined. Research was abruptly stopped and …

Ab Initio Investigation On The Surface Chemistry Of Functionalized Titania Membranes, Evan Hyde

Theses and Dissertations--Chemical and Materials Engineering

Titania (titanium dioxide) is a metal oxide which has recently been investigated as a photocatalyst, most commonly for use in hydrolysis, which absorbs mostly in the UV range. However, the range of absorption can be shifted to fall within the visible light range either by doping or by functionalizing the surface with atomic or molecular adsorbates. Over the course of this research, a series of Density Functional Theory (DFT) calculations are performed to ascertain the effects of these different methods on the photocatalytic performance of titania. While the effects of nitrogen doping and oxygen vacancies are well known, more recent …

Quantification Of Mitochondrial Membrane Potential In The Isloated Rat Lung Using R6g, Anthony Cammarata

Master's Theses (2009 -)

Mitochondrial membrane potential (Δm) plays a key role in vital mitochondrial functions, and its dissipation is a hallmark of mitochondrial dysfunction in various cell types. The objective of this study was to develop an experimental and computational approach for estimating Δm in intact rat lungs using the lipophilic fluorescent cationic dye rhodamine 6G (R6G). Rat lungs were isolated and connected to a ventilation-perfusion system. The experimental Protocol consisted of three single-pass phases: loading, wash, and uncoupling, in which the lungs were perfused with R6G-containing perfusate, fresh R6G-free perfusate, or R6G-free perfusate containing the mitochondrial uncoupler FCCP, respectively. This Protocol was …

Bioengineering Extracellular Matrix Scaffolds For Volumetric Muscle Loss, Kevin Roberts

Graduate Theses and Dissertations

Volumetric muscle loss overwhelms skeletal muscle’s ordinarily capable regenerative machinery, resulting in fibrosis and severe functional deficits which have defied clinical repair strategies. My work spans the design and preclinical evaluation of implants intended to drive the cell community of injured muscle toward a regenerative state, as well as the development of an understanding of the molecular responses of this cell community to biomaterial interventions. I demonstrate a new class of biomaterial by leveraging the productive capacity of sacrificial hollow fiber membrane cell culture; I show specifically that unique threads of whole extracellular matrix can be isolated by solvent degradation …

Chemical And Physical Modification Of Thiol-Ene And Epoxy-Amine Networks For Advanced Control Of Gas Transport And Flame Retardant Behavior, Vivek Vasagar

Dissertations

Crosslinked polymers are widely used due to its several advantages not limited to high mechanical strength combined with the easy processability. Despite of its popular usage, the fundamental understanding of polymer structure affecting the desired properties is still lacking. This PhD thesis is in two parts, the first part is devoted to the design and developing a basic understanding of structure and chemical composition dependencies of gas transport, whereas in the second part a fundamental relationship between structure to the fire-retardant properties is established.

Membrane based gas separation technique has attracted interest of selective removal of carbon dioxide gas from …

Developments Towards High-Flux Silica Nanosphere Substrates To Support Conforming Self-Assembled Gold Nanoparticle Monolayers For Applications In Size-Selective Filtration, Ryan Baker Vincent

Theses, Dissertations and Capstones

Hydrophobic thiol coated gold nanoparticles have recently been investigated for their ability to self-assemble into robust, ultra-thin, porous membranes at a liquid-vapor interface. Due to the well-ordered, hexagonal close-packed nanoparticle arrays formed during the self-assembly process, these 2-dimensional sheets have very well-defined pore structures and have been shown to span gaps of several microns under ideal conditions. While these self-assembled nanoparticle monolayers have very promising applications in the field of size-selective filtration due to their well-defined pore structure, they need to be supported by a rigid substrate with a large amount of open area. Here, tightly packed arrays of silica …

Wrinkling Of Membrane And Thin Film Under Torsion, Tingting Chen

Dissertations and Theses

Membranes and thin film structures are widely used in modern technologies. Applications include solar sails and sunshields in space missions, biological membranes and flexible circuit boards. Wrinkling of membrane or a stiff film on a soft substrate may occur in either desired or unwanted patterns. This work tries to obtain some understanding on the wrinkling phenomenon and provide guidance in avoiding wrinkling or effectively controlling the wrinkle patterns.

Many works have been published about wrinkling in the thin sheets since the 20^th century. However, there is no simple analytical way to systematically characterize the wrinkling in these studies. In …

Graphene Oxides In Water: Characterization, Reactivity, And Application, Siyuan An

McKelvey School of Engineering Theses & Dissertations

Recently discovered, graphene and graphene oxide materials have drawn considerable research attention due to outstanding and novel properties, which underpin wide material potential for a number of advanced applications including supercapacitors, solar cells, sensors, catalysts, semiconductors, sorbents, and membranes, among others. Graphene oxides (GO), which are considered as a family of oxidized graphene materials (derivatives), is a key precursor to the synthesis of free-standing graphene via oxidation-exfoliation-reduction pathways. GO properties depend on the synthesis routes/conditions (i.e. derivatization), including partially maintaining graphene (i.e. sp2) properties. Further, oxygen-containing functionalities (epoxy, hydroxyl, carbonyl, and carboxyl groups) render GO hydrophilic – and correspondingly stability …

Wafer Enhanced Electrodeionization For Conversion Of Co2 Into Bicarbonate Feed For Algae Cultured Photobioreactors, Kayvan Afrasiabi

Chemical Engineering Undergraduate Honors Theses

The world has acknowledged climate change as a global crisis that demands considerable attention, with one of the largest culprit being carbon emissions from industrial processing and power generation. While reduction in carbon emissions is the principal action towards mitigating the effects of climate change, scientists and engineers have given increased attention to alternative sources of energy as well as methods of carbon sequestration to coax traditional manufactory and industry into environmentally friendly and sustainable practices. One technology of this nature is the use of wafer-enhanced electrodeionization (WE-EDI) membranes to convert gaseous carbon dioxide (CO₂) from industrial flue …

Phase Field Model Of Thermally Induced Phase Separation (Tips) For The Formation Of Porous Polymer Membranes, Ashley Green, Aria Green

Mechanical Engineering Undergraduate Honors Theses

Most membrane research and development has been done through experimental work, which can be costly and time consuming. An accurate computational model would greatly reduce the need for these experiments. The focus of the research presented in this paper is to create an accurate computational model for membrane formation using thermally induced phase separation (TIPS). A phase field model is employed to create this model including the Cahn Hilliard Equation and Flory Huggins Theory. This model produced computational results that correspond well with theoretical and experimental results. The model was then adapted to correspond to the PVDF/DPC polymer-solvent system by …

Evaluation Of Commercial Pervaporation Membranes For Desalination Of Saline And Brackish Waters, Andres F. Sanchez

Open Access Theses & Dissertations

Pervaporation is a solution separation method that occurs by vapor transport through a selective membrane. As the need to provide drinking water to the growing population increases, pervaporation has potential merit as an alternative desalination technology, especially for water with very high salinity.

To our knowledge, there are no commercially available pervaporation membranes made specifically for desalination applications. Thus, the membranes PERVAP 4100 and PERVAP 4101 manufactured by DeltaMemAG were tested to evaluate their performance in desalination. Because the driving force in pervaporation is the difference in vapor pressure between the feed side and the permeate side of the membrane, …

Membrane Surface Engineering For Biochemical Applications, Anh T. Vu

Graduate Theses and Dissertations

Synthetic membranes have been frequently used for many fields, such as, the food and beverage, biopharmaceutical, and biofuel industries. In the beer industry, microfiltration frequently suffers from fouling due to the interaction between different species. It is shown that polyphenols can form cross-links with protein molecules, forming insoluble aggregates. However, by adding an optimal amount of polysaccharides these aggregates can be disrupted thus reducing fouling by the aggregates. Confocal laser scanning microscopy (CLSM) is a powerful technique to locate the foulants inside the wet membrane in order to understand more about the behavior of fouling in microfiltration.

Membrane surface modification …

Convection In Corrugated Slots, Seyed Arman Abtahi

Electronic Thesis and Dissertation Repository

This thesis consists of two parts. The first part deals with the development of proper methodology, i.e. a spectrally accurate algorithm suitable for analysis of convection problems in corrugated slots. The second part is devoted to the study of natural convection in corrugated slots.

The algorithm uses the immersed boundary conditions (IBC) concept to deal with the irregular form of the solution domain associated with the presence of corrugated plates. The field equations are discretized on a regular domain surrounding the flow domain using Fourier expansions in the horizontal direction and Chebyshev expansions in the vertical direction. The boundary conditions …