Open Access. Powered by Scholars. Published by Universities.®
Articles 1 - 6 of 6
Full-Text Articles in Engineering
Mix Design And Mechanical Properties Of Oil Palm Shell Lightweight Aggregate Concrete: A Review, Hilmi Mahmud
Mix Design And Mechanical Properties Of Oil Palm Shell Lightweight Aggregate Concrete: A Review, Hilmi Mahmud
Hilmi Mahmud
To build environmentally sustainable structures, especially in developing countries, the possibility of using some agricultural wastes and industrial by-products from different industries as construction materials will be highly desirable and has several practical and economic advantages. Oil palm shell (OPS) is a form of agricultural solid waste in the tropical regimes. Research over the last two decades shows that OPS can be used as a lightweight aggregate for producing structural lightweight aggregate concrete. The density of OPS concrete is around 20 - 25% lower than normal weight concrete. Generally, mechanical properties of OPS concrete are slightly lower than the other …
Performance Of Nevada’S Aggregates In Alkali-Aggregate Reactivity Of Portland Cement Concrete, Mohammad Shahidul Islam
Performance Of Nevada’S Aggregates In Alkali-Aggregate Reactivity Of Portland Cement Concrete, Mohammad Shahidul Islam
UNLV Theses, Dissertations, Professional Papers, and Capstones
Alkali-aggregate reaction (AAR) is a form of distress that occurs in concrete and results in serviceability problems, cracks, spalling, and other deterioration mechanisms. There are two categories of AAR, namely, alkali-silica reaction (ASR) and alkali-carbonate reaction (ACR). Alkali-silica reaction is one of the most recognized deleterious phenomena in concrete, and has been a major concern since its discovery in the 1940s. The reaction which occurs between reactive silica or silicates present in some aggregates and alkalis of Portland cement produces an alkali-silica gel that expands in the presence of moisture resulting in concrete cracks. ACR is also a chemical reaction …
Effect Of Aggregate Size And Proportion On Strength Properties Of Palm Kernel Shell Concrete, Hilmi Mahmud
Effect Of Aggregate Size And Proportion On Strength Properties Of Palm Kernel Shell Concrete, Hilmi Mahmud
Hilmi Mahmud
This paper presents information on the physical and mechanical properties of different sizes of palm kernel shells (PKS) used here as lightweight aggregates (LWA) and their influence on mechanical properties of palm kernel shell concrete (PKSC). Silica fume and fly ash were used as cementitious materials and all mixes had 1% superplasticizer on cement weight. It has been found that PKS consists of about 65 to 70% of medium size particles in the range of 5 to 10 mm. The other two sizes, namely, small (0-5 mm) and large (10-15 mm) sizes were found to influence the mechanical properties of …
Development Of Lightweight Concrete Using Industrial Waste Material, Palm Kernel Shell As Lightweight Aggregate And Its Properties, Hilmi Mahmud
Hilmi Mahmud
Agricultural industrial wastes produced after extracting palm oil from palm fruits known as palm kernel shell (PKS) are available in large quantities in Indonesia, Malaysia, Nigeria and other tropical countries. Malaysia is the second largest palm oil producing country in the world. This paper reports the results of an investigation conducted to utilize the PKS as lightweight aggregate to produce grade30 concrete with density of about 1850kg/m 3. The properties of both PKS and crushed granite aggregates were compared. The concrete produced using PKS referred to here after as palm kernel shell concrete (PKSC) and its properties were compared with …
Effect Of Aggregate Size And Proportion On Strength Properties Of Palm Kernel Shell Concrete, Zamin Jumaat
Effect Of Aggregate Size And Proportion On Strength Properties Of Palm Kernel Shell Concrete, Zamin Jumaat
Zamin Jumaat
This paper presents information on the physical and mechanical properties of different sizes of palm kernel shells (PKS) used here as lightweight aggregates (LWA) and their influence on mechanical properties of palm kernel shell concrete (PKSC). Silica fume and fly ash were used as cementitious materials and all mixes had 1% superplasticizer on cement weight. It has been found that PKS consists of about 65 to 70% of medium size particles in the range of 5 to 10 mm. The other two sizes, namely, small (0-5 mm) and large (10-15 mm) sizes were found to influence the mechanical properties of …
Comparison Of Mechanical And Bond Properties Of Oil Palm Kernel Shell Concrete With Normal Weight Concrete, Zamin Jumaat
Comparison Of Mechanical And Bond Properties Of Oil Palm Kernel Shell Concrete With Normal Weight Concrete, Zamin Jumaat
Zamin Jumaat
The comparison of the fresh, mechanical and bond properties of grade 30 lightweight concrete, namely oil palm kernel shell concrete (OPKSC) with normal weight concrete (NWC) of similar strength is presented in this paper. Oil palm kernel shell (OPKS), an industrial waste has been used as lightweight aggregates (LWA) in the OPKSC. In addition, mineral admixtures, 10% of silica fume and 5% fly ash have been used. The OPKSC produced a density reduction of about 20% compared to NWC. The addition of silica fume enhanced the compressive strength and thus OPKSC produced 28-day compressive strength up to 37 MPa. The …