Engineering Commons^™

Incorporating Spatial Information Into Gas Plume Detection In Hyperspectral Imagery, Cameron S. Grant

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Detection of chemical plumes in hyperspectral data is a problem having solutions that focus on spectral information. These solutions neglect the presence of the spatial information in the scene. The spatial information is exploited in this work by assignment of prior probabilities to neighborhood configurations of signal presence or absence. These probabilities are leveraged in a total probability approach to testing for signal presence in a pixel of interest. The two new algorithms developed are named spatial information detection enhancement (SIDE) and bolt-on SIDE (B-SIDE). The results are explored in comparison to the clutter matched filter (CMF), a standard spectral …

Retrieval Of Aerosol Mass Concentration From Elastic Lidar Data, Christian C. Marchant

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Agricultural aerosol sources can contribute significantly to air pollution in many regions of the country. Characterization of the aerosol emissions of agricultural operations is required to establish a scientific basis for crafting regulations concerning agricultural aerosols. A new lidar instrument for measuring aerosol emissions is described, as well as two new algorithms for converting lidar measurements into aerosol concentration data. The average daily aerosol emission rate is estimated from a dairy using lidar.

The Aglite Lidar is a portable scanning lidar for mapping the concentration of particulate matter from agricultural and other sources. The instrument is described and performance and …

An Onboard Vision System For Unmanned Aerial Vehicle Guidance, Barrett Bruce Edwards

Theses and Dissertations

The viability of small Unmanned Aerial Vehicles (UAVs) as a stable platform for specific application use has been significantly advanced in recent years. Initial focus of lightweight UAV development was to create a craft capable of stable and controllable flight. This is largely a solved problem. Currently, the field has progressed to the point that unmanned aircraft can be carried in a backpack, launched by hand, weigh only a few pounds and be capable of navigating through unrestricted airspace. The most basic use of a UAV is to visually observe the environment and use that information to influence decision making. …

Comparing Implementations Of Magnetic-Resonance-Guided Fluorescence Molecular Tomography For Diagnostic Classification Of Brain Tumors, Scott C. Davis, Kimberley S. Samkoe, Julia A. O’Hara, Summer L. Gibbs-Strauss, Keith D. Paulsen, Brian W. Pogue

Dartmouth Scholarship

Fluorescence molecular tomography (FMT) systems coupled to conventional imaging modalities such as magnetic resonance imaging (MRI) and computed tomography provide unique opportunities to combine data sets and improve image quality and content. Yet, the ideal approach to combine these complementary data is still not obvious. This preclinical study compares several methods for incorporating MRI spatial prior information into FMT imaging algorithms in the context of in vivo tissue diagnosis. Populations of mice inoculated with brain tumors that expressed either high or low levels of epidermal growth factor receptor (EGFR) were imaged using an EGF-bound near-infrared dye and a spectrometer-based MRI-FMT …

Design And Application Of An Image-Processing-Based Fuzzy Autopilot For Small-Boat Approaching Maneuvers, Sin-Der Lee, Ching-Yaw Tzeng, Young-Zehr Kehr, Chih-Kai Kang, Chi-Chun Huang

Journal of Marine Science and Technology

This paper presents an image-processing-based fuzzy autopilot scheme for accomplishing small-boat approaching maneuvers in a harbor environment. In the proposed approach, two canvas targets are arranged in cascade on the quayside to form a leading line. The targets are detected by a charge coupled device (CCD) camera mounted on the bow of the boat, and their geometric centers are computed by a Hue- and Saturation-based image-processing scheme. The autopilot system calculates the current heading deviation and tracking deviation angles of the boat by analyzing the displacements of the target centers relative to the CCD center line. These angles are then …

Novel Wavelength Diversity Technique For High-Speed Atmospheric Turbulence Compensation, William W. Arrasmith, Sean F. Sullivan

Electrical Engineering and Computer Science Faculty Publications

The defense, intelligence, and homeland security communities are driving a need for software dominant, real-time or near-real time atmospheric turbulence compensated imagery. The development of parallel processing capabilities are finding application in diverse areas including image processing, target tracking, pattern recognition, and image fusion to name a few. A novel approach to the computationally intensive case of software dominant optical and near infrared imaging through atmospheric turbulence is addressed in this paper. Previously, the somewhat conventional wavelength diversity method has been used to compensate for atmospheric turbulence with great success. We apply a new correlation based approach to the wavelength …

Analysis Of Slewing And Attitude Determination Requirements For Ctex, William J. Starr Jr.

Theses and Dissertations

This thesis examines the slewing and attitude determination requirements for the Chromotomographic Experiment (CTEX), a chromotomographic-based hyperspectral imager, to be mounted on-board the Japanese Experiment Module (JEM) External Facility (EF). The in-track slewing requirement is driven by the facts that CTEx has a very small field of view (FOV) and is required to collect 10 seconds of data for any given collection window. The need to slew in the cross-track direction is a product of the small FOV and target/calibration site access. CTEx incorporates a two-axis slow-steering dwell mirror with a range of ± 8 degrees and an accuracy of …

Design Analysis Of A Sapce Based Chromotomographic Hyperspectral Imaging Experiment, Todd A. Book

Theses and Dissertations

This research develops the design of several components and/or systems for an experimental space-based chromotomographic hyperspectral imager that is being built by the Air Force Institute of Technology. The design work includes three separate topics. The first topic was the development of a structure utilizing finite element analysis and eigenanalysis for the ground-based version of the chromotomographic experiment (CTEx). The ground-based experiment was performed as a risk mitigation measure for the space-based experiment. The second topic includes a design review of a contractor's proposed off-axis Mersenne telescope for the space-based chromotomographic hyperspectral imager. The work included the creation of preliminary …

Jpeg Compression Of Monochrome 2d-Barcode Images Using Dct Coefficient Distributions, Keng Teong Tan, Douglas Chai

Research outputs pre 2011

Two dimensional (2D) barcodes are becoming a pervasive interface for mobile devices, such as camera phones. Often, only monochrome 2D-barcodes are used due to their robustness in an uncontrolled operating environment of camera phones. Most camera phones capture and store such 2D-barcode images in the baseline JPEG format. As a lossy compression technique, JPEG does introduce a fair amount of error in the decoding of captured 2D-barcode images. In this paper, we introduce an improved JPEG compression scheme for such barcode images. By altering the JPEG compression parameters based on the DCT coefficient distribution of such barcode images, the improved …

Heating Performance Assessment Of Domestic Microwave Ovens, Krishnamoorthy Pitchai, Sohan Birla, Jeyamkondan Subbiah, David D. Jones

Department of Biological Systems Engineering: Conference Presentations and White Papers

Due to inherent nature of standing wave patterns of microwaves inside a cavity and dielectric properties of different components in a food, microwave heating leaves non-uniform distribution of energy inside the food volumetrically. Achieving heating uniformity plays critical role in improving the safety of microwave heated products. In this paper, we present a method for assessing heating uniformity within domestic microwave ovens. A custom designed container
was used to assess heating uniformity of a range of microwave ovens using IR camera. The study suggested that the best place to place food in a microwave oven is not at center but …

A Study Of Hough Transform For Weld Extraction, Rakesh Gunaseelan

LSU Master's Theses

The process of joining metals is called welding. At times, selecting a poor quality material or improper usage of welding technologies may cause defects in welded joints. Some of these welded joints have to be tested nondestructively, because their failure can cause lot of damage, for instance in power plants. Radiography is a very common method for non-destructive testing of welds. It is done by certified weld inspectors who have knowledge about weld flaws, looking at the radiograph of the welded joint with naked eye. The judgment of the weld inspector can be biased; subjective, because it is dependent on …

Compressive Sensing With Prior Information Applied To Magnetic Resonance Imaging, Cristiano Jacques Miosso

Open Access Theses & Dissertations

This dissertation introduces the theory of compressive sensing with prior information about a signal's sparse representation. We show, mathematically and in numerical simulations, that prior information improves signal reconstruction, in terms of number of required measurements, computation time and signal-to-noise ratios. Following, we present a set of methods for enhanced magnetic resonance imaging and tomography that can be combined with prior information, for enhanced image quality.

In developing the theory of compressive sensing with prior information, we provide a mathematical proof of the required condition (in terms of number of linear measurements) for reconstruction using the ideal approach of l0-minimization, …