Engineering Commons^™

Thermoacoustic Refrigerator, Rees Phillip Verleur, Colleen Farrell Mccandless, Anders Matthew Bjork, Yashraj Ashwinkumar Solanki

Mechanical Engineering

In the Thermoacoustic Refrigerator Cal Poly Mechanical Engineering senior project, we designed, built, and tested a thermoacoustic refrigeration system which achieved an average temperature difference of 11.0°C. Our system consists of a resonator tube with an instrumented stack, mounted onto a base with a speaker and amplifier. An external power supply and function generator provide the power and signal to the system, and a thermocouple reader displays the temperature of the top and bottom of the stack. The system consistently achieved a significant temperature difference between the two ends of the stack in various ambient conditions, and it was quick …

Mmteg Heatsink Design, Peyton Nienaber, Kadin Feldis, Alec Savoye, Jack Waeschle

Mechanical Engineering

In this document, Cal Poly Senior Design Team F16 presents a summary of its work developing a suitable heatsink for Gas Technology Institute’s Methane Mitigation Thermoelectric Generator. After several months of iterating between experimental testing and simulated heat transfer, a suitable prototype was selected for use in further refining simulation parameters. This was called the structural prototype and it allowed Team F16 to confirm several remaining unknowns relating to component thermal conductivity. All documentation of this process can be found in Preliminary, Critical, and Interim Design Review documents (PDR, CDR, IDR), included in this report. Having a realistic model …

Mechanized Theatre Turntable, Chloe Huiyi Chou, Ethan Lee Stroh, Ruodolf Reller Quelnat Rumbaoa, Davide Lanfranconi

Mechanical Engineering

This project aimed to create a remote-control and drive system for a theatrical turntable that was constructed by the Theatre and Dance Department of California Polytechnic State University, San Luis Obispo. Over the course of three quarters, the team successfully designed and manufactured a working verification prototype. This verification prototype was then tested, and the project sponsor verified that it met all specifications. The current iteration of the verification prototype can support up to a load of 1400 lbf, rotate a 12 ft diameter turntable clockwise and counterclockwise with a speed range of 1 to 4 rpm, and is able …

Inverted Fluorescence Microscope, Matthew B. Pfeiffer, Spencer George Hann, Thomas James Eggenberger, Trevor Lee Blythe

Mechanical Engineering

Team F13 is composed of Trevor Blythe, Spencer Hann, Matthew Pfeiffer, and Thomas Eggenberger. We are all majoring in mechanical engineering and in our final year of study here at Cal Poly San Luis Obispo. This project is a continuation of a 2019-2020 senior project. The previous team designed and built a functioning inverted fluorescence microscope (IFM) from scratch. This device was created as a lab tool for undergraduate students to be able to perform experiments on microfluidic devices constructed in Cal Poly’s Microfabrication Laboratory. Although substantially functional, several design constraints had not yet been met. Our team has improved …

Adapted Tricycle 2021, Carolyn Graven, Daniel Coleman, Sebin Cho, Farhan Khan

Mechanical Engineering

This document describes and outlines the details of the senior project completed by a team of four mechanical engineering students in their final year at California Polytechnic State University, San Luis Obispo. The team worked with Linda Wolff at California Children’s Services to reach their main goal: to create an exercise tricycle that can be used by Savannah. Savannah is a young adult, and she needs to be able to steer, brake, and power the tricycle using almost entirely her core muscles. Over the course of the project, the team worked to design and build a safe and functional tricycle …

Electromagnetic Actuator For Camless Engines, Nicholas Olesh, Charlie Thomas Glenwright, Tim Wills De Tone, Darya Daniel Darvish

Mechanical Engineering

This document summarizes the research, objectives, project plan, and design for developing an electromagnetic actuator valve for use in a camless internal combustion engine. While electromagnetic valve actuators have not been implemented into a working product to date, there have been many attempts to research and develop working prototypes. Similar products have been developed, but they do not use purely electromagnetic actuation. This research is significant because it shows the challenge that must be overcome and outlines potential design solutions to the problem. The objectives section highlights the problem statement and what is aimed to be achieved in this project. …

Heavenly Bodies Rsvp, Justin Tyler Spitzer, Allison Jean Turnbaugh, Jack William Boulware, Braden Alex Lockwood

Mechanical Engineering

The purpose of the Heavenly Bodies RSVP project was to design and fabricate planet props, as well as a mechanism by which they could be raised and lowered in California Polytechnic State University’s Pavilion theater. The project team was comprised of four fourth year mechanical engineering students: Allison Turnbaugh, Braden Lockwood, Jack Boulware, and Justin Spitzer. We conducted extensive research to determine the ideal solution for the design problem brought to us by our sponsor. In our analysis, we discovered that the most important aspects of our design were the absolute reliability of the system, fire retardant material selection, and …

High Strollers, Braeden Hammond, Morley Perrin, Reid Bartels, Juan Rodriguez

Mechanical Engineering

This report documents the final product of Jonathon’s new lightweight stroller. The Mechanical Engineering team from Cal Poly, High Strollers, began the project to create a lightweight stroller for the project sponsor, Nina Aguayo, and her son, Jonathon Aguayo, in Fall of 2018. Jonathon is diagnosed with Delayed Brain Development and Hypotonia with some characteristics of Cerebral Palsy. He has a 50lb high intensity stroller to go to and from school. Mrs. Aguayo needed a stroller that is easier to transport while still meeting all of Jonathon’s needs. The re-designed stroller will make leisurely outings for Mrs. Aguayo and Jonathon …

National Society Of Sales Engineers & National Sales Engineering Competition, Joseph Lynes, Tyler Sasse

Industrial and Manufacturing Engineering

Sales Engineering is a popular career choice for many engineers coming out of university. Despite its continuing growth, many students lack the knowledge and preparation to be successful in the early years of their career. A small collection of sales engineering minors and student clubs are the only option for students interested in technical sales.

Using the DMAIC process, the senior project team went step by step to find and implement the best possible solution to better connect college students and the professional sales engineering industry . The team worked side by side with professionals in the industry and students …

Industrial Engineering Consulting, Blake J. Ahrold, Torrey M. Plana

Industrial and Manufacturing Engineering

This paper documents the senior project of Blake Ahrold and Torrey Plana. This project was created to provide a solution to the problem of small to medium Sized enterprises (SMEs) being under represented by lean consulting companies. The project was at first intended to be a lean consulting startup and then pivoted to The Systems Optimization Club. A project charter, Gantt chart, and business model canvas were created for the startup and used as guidelines in the creation of the Systems Optimization club. The club is to be run like a lean consulting company. The club will provide teams of …

Automated Foosball Table Year 1: Final Project Report, Juan David Gutierrez-Franco, John Inlow, Jesse Graham, Larry Huang

Mechanical Engineering

This project is a first iteration of an automated foosball table designed and created using servomotors provided by Yaskawa to create an interactive tradeshow display where guests can play against the algorithms developed in the PLC (programmable logic controller) controlling the servomotors. There will be a second iteration of the project done by a different team directly following this one. The motion components were selected with the intent to be able to surpass the reaction times and speeds of expert human players. There are a total of eight servomotors, four controlling linear actuators for translation of rods, and four controlling …

School Van Access In Nepal, Edgar Corona, Humberto Maldonado, Josh Schiesl

Mechanical Engineering

A need has been identified by a school in Nepal intended for children with Cerebral Palsy, called Sathi Sansar, to develop a more effective solution to loading and unloading students onto the school’s Toyota HiAce van. Currently, a combination of the driver, parents and teachers manually help the students on and off the van. However, this task has proven to be both laborious and time consuming for all parties involved. A solution to this problem needs to be designed and one is currently being developed by a team of engineering students from California Polytechnic State University-San Luis Obispo and Katmandu …

Cal Poly Brocade Challenge 2013, Chandler Morehardt, Alexa Coburn, Juan Silva, Kerry Sun, Greg Wang, Raul Chagoya, Jd Torres

Architectural Engineering

No abstract provided.

Thermodynamic Based Model Eliciting Activities For Undergraduate Mechanical Engineering Education, Paul Nicholas Van Bloemen Waanders

Master's Theses

Undergraduate engineering education is designed to prepare students for their careers. The rise of technology in modern engineering allows for a shift in the way undergraduates are prepared for the modern workplace. Model Eliciting Activities (MEAs) allow students to think critically about their own work and allow instructors to analyze the students’ problem solving methods. To ensure that new MEAs are as effective as possible they are subject to six basic principles: model construction, reality, generalizability, self-assessment, model documentation, and effective prototype.

This document focuses on evaluating new MEAs for their adherence to the six principles from an instructor's and …

Universal Play Frame Vi, Justin Bazant, Cullen Crackel, Anthony Franceschi

Mechanical Engineering

This design report details the design process utilized by Adaptive Exercise Designs (AED) in creating the sixth design of the Universal Play Frame (UPF). The UPF is an adaptive frame which supports a variety of devices that allows athletes in wheelchairs with limited range of motion to participate in physical activity. The past five frame designs do not meet the needs of the Friday Club due to complications with function and time constraints. To ensure all of Fridays Club's needs were met, the problem was better defined by converting the customer requirements into engineering specifications. The design process our team …