Engineering Commons^™

Roofsat: Teaching Students Skills For Software Development For Gis Data Collection And Other Activities, Jeremy Straub, Ronald Marsh, Donovan Torgerson, Christoffer Korvald

Jeremy Straub

Small Spacecraft provide an excellent platform for the collection of geospatial data. In order to enable the low-cost creation of small remote sensing space-craft in a university environment, a training pathway for students is required. The Realistic Operational Ob-ject for Facilitating Software Assessment and Testing (RoofSat) serves to provide students with experience developing software for a small satellite platform typi-cal of those used for remote sensing missions. It al-lows software to be tested with hardware that re-sponds in a similar manner to that found on the satel-lite for a fraction of the cost of development. This poster details the goals …

Educational Outcomes From The Openorbiter Small Spacecraft Development Program, Jeremy Straub

Jeremy Straub

The OpenOrbiter program [1] is developing a low-cost framework for the creation of space-craft by researchers and educators worldwide [8]. In addition to the technical objectives, ed-ucational assessment [2, 3] has also been a key focus. Students working on development of the spacecraft [4] were asked what types of benefits they sought from their participation [5]. The assessment of the attainment of these benefits is ongoing, in conjunction with continued development in pursuit of the crea-tion of a set of designs that can be used to build a spacecraft with a cost of under $5,000 [13] .

Openorbiter Combined Software Work Breakdown Structure, Jeremy Straub, Timothy Whitney, Tyler Leben, Kelton Karboviak, Zach Maguire, Christoffer Korvald, Scott Kerlin

Jeremy Straub

As part of CSCI 297, students created work breakdown structures for different areas of the OpenOrbiter project’s software groups. In CSCI 207, they learned about all aspects of project management via experiential learning. They acted as project management ‘consultants’ to the OpenOrbiter software teams. To facilitate the creation of the work breakdown structures, they interviewed team leads, attended team meetings and discussed current progress and needs with members of the teams. In some cases, they collected additional information from reference sources and/or spoke with other teams which would be the ‘customer’ of a particular area of the software system. These …

Motor Protection Lab Experiment Using Sel-710, Ozro Corulli

Electrical Engineering

Advancements in microprocessor based relay technology for power protection applications provide quicker response times and new methods of mitigation. This project develops a lab experiment for Cal Poly class EE444 - Power Systems Laboratory based on the Schweitzer SEL-710 motor protection relay. Learning objectives for this lab include relay setup, programming, and protection schemes for the following conditions: undervoltage, loss of phase, fault, locked rotor, and thermal overload. Today, utility companies across the globe use SEL relays for primary system protection, putting engineers familiar with their operation in high demand.

A Proposed Learner-Centered Mechatronics Engineering Instructional Program, Patrick N. Currier, Richard Goff, Janis Terpenny

Patrick N. Currier

This paper examines the need and requirements for a mechatronics degree program. The results of a survey of the few existing programs in this field are provided. Then, using a case study example for Virginia Tech, a proposed mechatronics curriculum based on a learner-centered paradigm is described. The curriculum combines existing courses in mechanical, electrical, and computer engineering with new, hands-on courses to provide students with a chance to practice and explore the subject matter in ways consistent with the demands of both industry and accreditation. This program, if implemented, could provide a university with a unique offering to attract …

Visualizing Mechanics: Improving Student Learning Through Video Demonstrations, Blake A. Wetherton, Olumide A. Awofeso, Carolyn E. Creighton, Adam F. Potrzebowski, Charles M. Krousgrill, Jeffrey F. Rhoads

The Summer Undergraduate Research Fellowship (SURF) Symposium

The Purdue Mechanics Freeform Classroom (PMFC) is a project that seeks to reform engineering mechanics education by integrating content and technology; enhancing communication between students, their peers, and instructors; accommodating a broader range of learning styles; and facilitating greater depths of understanding. In an attempt to increase the PMFC’s efficacy, a series of demonstration videos has been produced. As demonstrated by the popularity and pervasiveness of websites such as YouTube, short videos have the potential to captivate audiences. As such, these videos have incredible promise in educational contexts. In the PMFC series of videos, entitled Visualizing Mechanics, each imitates the …

Development Of Pneumatic Robot For Outreach, Eshamogbo E. Ojuba, John Lumkes

The Summer Undergraduate Research Fellowship (SURF) Symposium

To encourage the current generation of high school and middle school students to pursue careers in engineering, it is important to have challenging hands-on engineering activities for them. Such activities should be interesting, compelling, and, most importantly, educative. A mini-excavator was built for fluid power outreach, but this tool only demonstrates fluid power, without showing other important aspects of engineering. The tool being developed is able to demonstrate fluid power, as well as other important aspects of engineering, such as controls, electronics, and programming. This tool is an electronically-controlled device that allows the user control a pneumatic circuit, coupled with …

Scholarly Collaboration In Engineering Education: From Big-Data Scientometrics To User-Centered Software Design, Hanjun Xian

Open Access Dissertations

Engineering education research has grown into a flourishing community with an-ever increasing number of publications and scholars. However, recent studies show that a significant amount of engineering education knowledge retains a clear disciplinary orientation. If the gaps in scholarly collaboration continue to be prevalent within the entire community, it will become increasingly difficult to sustain community memory. This will eventually inhibit the propagation of innovations and slow the movement of research findings into practice.

This dissertation studies scholarly collaboration in the engineering education research community. It provides a clear characterization of collaboration problems and proposes potential solutions. The dissertation is …

Visual Literacy And The Integration Of Parametric Modeling In The Problem-Based Curriculum, Matthew Benedict Assenmacher

Master's Theses and Doctoral Dissertations

This quasi-experimental study investigated the application of visual literacy skills in the form of parametric modeling software in relation to traditional forms of sketching. The study included two groups of high school technical design students. The control and experimental groups involved in the study consisted of two randomly selected groups of students. The participants were exposed to eight weeks of technical drawing and parametric modeling instruction prior to the start of the study.

The potential applications of emerging technologies for the purpose of integrating visual literacy into the curriculum are not fully understood. Society is moving towards a more immediate …

Issues In Organisation And Management Of Multidisciplinary Group Design Projects, Ken Keating, Claire Brougham, Graham Gavin, Ger Reilly

Conference Papers

No abstract provided.

Merging Creative Design And Cad Learning Activities In A Product Design Programme, Pearl O'Rourke, Colm O'Kane, Leslie Smith, Michael Ring

Conference Papers

Traditional learning and teaching methods for creativity differ from those used in a scientific context. Although the creative process can benefit from a certain level of prescription and structural constraint - with time allocated to research, problem definition, conceptualisation and idea development - flexibility and fluidity are necessary for creative innovation. In contrast, the more linear and rigid pedagogies associated with science and engineering education facilitate efficient learning of subjects such as those based on software packages, manufacturing and materials theory or mechanics. This paper describes the development of a project which aims to establish constructive links between the learning …

A Curriculum-Integrated Small Spacecraft Program For Interdisciplinary Education, Jeremy Straub, Anders Nervold, Josh Berk

Jeremy Straub

Space generates inspiration, aspiration, and passion in many students, traits that are often lacking in the traditional college classroom. By utilizing a meaningful space project with a tangible product, which serves a valuable purpose in the curriculum, instructors can generate passion in their students with regards to the topics being explored. Additionally, it can fuel interest in aerospace science and commerce, guiding more students towards valuable STEM degrees and job opportunities, which can lead to future growth and fresh blood in the aging aerospace employee pool.

OpenOrbiter is a student-run research project at the University of North Dakota that can …

Defining Characteristics Of An Integrated Stem Curriculum In K-12 Education, Vinson Robert Carter

Graduate Theses and Dissertations

The purpose of the study was to obtain consensus concerning the defining characteristics of integrated STEM (Science, Technology, Engineering, and Mathematics) curriculum. This study utilized a three round modified Delphi study to solicit recommendations from experts of STEM education in order to: 1) create a set of categorical and defining curricular components needed to develop and implement appropriate integrated STEM curriculum; 2) identify the characteristics that set integrated STEM education curriculum apart from single-discipline curricula; 3) discuss the components necessary to gauge whether an initiative, project, or curriculum should be referred to as integrated STEM education; and 4) examine whether …

Analysis Of Brownsville Public Utilities Board Hybrid Wind And Solar Energy Systems: Case Study And Analysis In Brownsville, Texas, Lina L. Chavez

Theses and Dissertations - UTB/UTPA

Engineers are tasked and responsible for studying and designing environmentally safer forms of electrical generation including wind and solar sources. A national effort to reduce dependency on foreign oil due to economic and environmental impacts is underway and race to full scale implementation of alternate energy sources is eminent. The question looms: Is renewable energy generation for residences feasible from an engineering and economic perspective? Although wind and solar generators are gaining ground on conventional generation methods in different sectors, lack of information with regards to design, implementation, and payback still remain a major roadblock. The objective of this case …

Why Do Indiana Pre-Service Technology Education Majors Choose The Profession, Traves L. Freeland

Purdue Polytechnic Masters Theses

The purpose of this descriptive study was to look at the factors that influence pre-service technology education majors to choose to become teachers. The pre-service teachers of three Indiana technology education teacher preparatory programs were given an internet survey to collect demographic data and determine what factors influence current pre-service teachers. The results of this study were compared to the results from a study done by Harris (2007). The findings resulted in similar factors that were the most common identified as being influential. Those factors included personal interest or hobbies, high school or middle school teacher, and past experiences in …

National Infrastructure Protection Priorities For Nuclear Electromagnetic Pulse (Emp) And Solar Storm Geomagnetic Disturbance Catastrophes, George H. Baker Iii

George H Baker

The Commission to Assess the Threat to the United States from Electromagnetic Pulse Attack has provided a compelling case for protecting civilian infrastructure against the effects of EMP and geomagnetic disturbances (GMD) caused by severe solar storms. Similar to protecting critical infrastructure against any hazard, it will be important to take a risk-based priority approach for these two electromagnetic threats, recognizing that it will be fiscally impracticable to protect everything. In this regard, EMP and GMD are particularly challenging in that they interfere with electrical and electronic data, control, transmission, and communication systems organic to nearly all critical infrastructures, simultaneously, …

Protecting The Electric Power Grid From Electromagnetic Pulse: Legal And Policy Aspects, George H. Baker Iii, William R. Harris, Thomas S. Popik

George H Baker

Since the release of the 2004 and 2008 reports of the congressionally-authorized Commission to Assess the Threat to the United States from Electromagnetic Pulse Attack (“EMP Commission”), there has been a growing societal realization that civilian infrastructure is vulnerable to electromagnetic pulse (EMP) threats. And among the DHS list of critical infrastructure sectors, the electric power grid is both the most vulnerable, because EMP couples most efficiently to long power lines, and the most critical, because the grid is the keystone infrastructure upon which all other infrastructures depend. Simply put, grid failure is an existential threat to national governance and …

Updates To A Sequence Of Thermodynamics Experiments For Mechanical Engineering Technology Students, Roger A. Beardsley

All Faculty Scholarship for the School of Graduate Studies and Research

This paper presents an outline of thermodynamics experiments and lab activities that accompany the introductory thermodynamics course for Mechanical Engineering Technology juniors at Central Washington University (CWU) in Ellensburg, Washington. It outlines and describes the current suite of thermodynamics lab activities, comparing the current suite of seven lab activities to a sequence outlined in an ASEE conference paper presented in 1995. Some lab activities in that paper have been replaced, while others have been updated. For example an experiment to measure the Joule-Thomson coefficient has been replaced with a First Law energy balance activity and the former First Law experiment …

Operating Standards For The High Altitude Ballooning Community, Jeremy Straub, John Nordlie, Ernest Anderson

Jeremy Straub

This paper provides an overview of work to define a set of standards for adoption by the academic high altitude balloon community. These standards go above-and-beyond the requirements imposed by §101 of the Federal Aviation Regulations, incorporating best practices and suggesting how §101 requirements should be interpreted and applied in several situations.

One area where FAR§101 is extremely vague is with regards to the operations of balloons with small payloads. These payloads are exempt from most requirements; however, they are required to not create a “hazard”. Problematically, what exactly qualifies as a “hazard” is not defined in FAR§101 or elsewhere …

An Investigation Of The Impact Of Requirements Engineering Skills On Project Success, Cynthia Atkins

Electronic Theses and Dissertations

A survey of project managers and requirements engineers was conducted to determine what skills, qualifications, and experiences were associated with project success. Survey results indicated that projects using Joint Application Development (JAD) sessions, use cases, and prototypes to engineer requirements were most successful. Other indicators of project success, according to participants, included an adequate allotment of time for requirements engineering—at least 15% of a project's time—and the use of project managers and requirements engineers with professional work experience. In particular, data indicated that Project Managers with at least five years of experience in Information Technology resulted in more successful projects.

A Review Of Online Collaboration Tools Used By The Und Openorbiter Program, Jeremy Straub, Christoffer Korvald

Jeremy Straub

The OpenOrbiter program at the University of North Dakota is a student-initiated, student-run effort to design, develop, test, launch and operate a CubeSat-class spacecraft to validate the designs of the Open Prototype for Educational NanoSatellites (a framework that will be made publically-available to allow faster and lower-cost missions at other educational institutions worldwide). OpenOrbiter involves (at various participation levels) over 200 faculty and students spanning five colleges and ten departments. To coordinate this large group of participants who comprise over seventeen teams and work at disjoint hours in a plethora of locations, online project management, software source control and hardware …

Top-Ten It Issues, 2013: Welcome To The Connected Age, Susan Grajek, David Rotman

Administrative Personnel Publications

No abstract provided.

Cleerhub.Org Adoption By Eafit University Engineering Faculty Members: A Longitudinal Study, Diego M. Mendez Mena

Purdue Polytechnic Masters Theses

The main purpose of this study is to identify and comprehend faculty members’ perception of attributes of the diffusion of the technological innovation CLEERhub.org at EAFIT University, College of Engineering, in Medellin, Colombia. Moreover, this work attempts to understand causes and motivators that might lead to innovation adoption or rejection. The Diffusion of Innovations Theory serves as the framework to develop an appropriate assessing instrument that allows accurate measuring of user opinions towards the practice of CLEERhub.org in their educational research work in Engineering. In order to correctly assess user perception of the embracement process of such technological/cyberinfrastructure innovation, the …

Towards A “Cloud Curriculum” In Art And Science?, Roger Malina

The STEAM Journal

Recently an email hit my desk from Paul Thomas in Australia with a proposal to work together on a “Cloud Curriculum for Art and Science”. I immediately agreed to collaborate. I don’t yet have a clue of what a cloud curriculum is, but what I do know is that we are ‘backing into the future’ in educational institutions and we desperately need a ‘cloud curriculum.’ We need to look over the ten year horizon. And in the emerging art-science field I doubt that the usual approach to curriculum development will work.

Steam...Now!, John Eger

The STEAM Journal

With America slowly awakening to the need to turn out creative and innovative workers who can join the 21^st century (its already 2012) workplace -- because they have the new thinking skills --we have to change the current emphasis on STEM, for Science, Technology, Engineering and Math to STEAM, by insuring that the whole brain is nurtured through the arts: thus STEAM.

Getting Real About The E In Steam, James Catterall

The STEAM Journal

STEM and STEAM are in the news. Researchers and educators in my field (cognition, art, and creativity) argue reasons for adding the A to STEM. While I visit this below, my focus is elsewhere. In this brief essay, I want to explore the meaning and importance of the E appearing in both STEM and STEAM. What’s engineering doing in this mix? And what are some reasons for affirming the arts when the role of engineering is clarified?

I2StemE - What, Who, Where?, Kania Greer, Bob Mayes

Interdisciplinary STEM Teaching & Learning Conference (2012-2019)

I²STEM^e is a new Institute on the campus of GSU whose focus is to increase opportunities for K-20 students, teachers, and businesses to partner together to improve STEM Education in Georgia around the tenets of place-based learning, problem based learning and teaching for understanding.

Feedback Dynamics In The Academic And Industrial Environment, David Kennedy, Dermot Mcgarthy

Conference Papers

Feedback is essential in all companies, in society and in educational environments. We learn, improve and develop from it in our examinations, group work, work environment and relationships. Feedback however must be supported with good communications and be consistent. In the classroom environment this means providing feedback in a positive and supportive manner, and being consistent to all. Most if not all managers and leaders, including lecturers have not undertaken any form of training in feedback methods and therefore it is not translated effectively, causing stress or misguidance to students and colleagues. This paper highlights the importance of good feedback, …

Using Plankton Imaging Technology And Computer Science For Biological Oceanographic Advancement And Education, Adam T. Greer

Adam T. Greer

Oceanography is an inherently interdisciplinary subject that combines observations of physics, biology, chemistry, and their interactions. While most physical and chemical measurements can be made on small scales (cm to m) through the use of sensors (temperature, salinity, pH, etc.), traditional tools to understand the biology of the ocean have only allowed for coarse sampling resolution (i.e., plankton nets sample large portions of the water column). New imaging technology enables the biological component of the ocean to be sampled on the same scale as the physical and chemical, allowing scientists to finally address the interactions among different oceanographic processes. Image …

The Openorbiter Program: Intrepreneurship, Entrepreneurship And Innovation, Jeremy Straub

Jeremy Straub

The University of North Dakota’s OpenOrbiter program is providing an interdisciplinary learning experience for students from numerous STEM and non-STEM fields. OpenOrbiter allows student participants to experience not just the engineering and other technical aspects of the space program, it also involves students from diverse, non-STEM fields (including communications, entrepreneurship, management, visual arts, public policy and English). Traditional STEM fields such as mathematics, physics, electrical engineering, mechanical engineering, computer science and technology are also well represented. Students from specially programs at the University of North Dakota including atmospheric sciences, Earth System Sciences and Policy, aviation, Space Studies and Air Traffic …