Engineering Commons^™

Educational Outcomes From The Openorbiter Small Spacecraft Development Program, Jeremy Straub

Jeremy Straub

The OpenOrbiter program [1] is developing a low-cost framework for the creation of space-craft by researchers and educators worldwide [8]. In addition to the technical objectives, ed-ucational assessment [2, 3] has also been a key focus. Students working on development of the spacecraft [4] were asked what types of benefits they sought from their participation [5]. The assessment of the attainment of these benefits is ongoing, in conjunction with continued development in pursuit of the crea-tion of a set of designs that can be used to build a spacecraft with a cost of under $5,000 [13] .

Openorbiter Combined Software Work Breakdown Structure, Jeremy Straub, Timothy Whitney, Tyler Leben, Kelton Karboviak, Zach Maguire, Christoffer Korvald, Scott Kerlin

Jeremy Straub

As part of CSCI 297, students created work breakdown structures for different areas of the OpenOrbiter project’s software groups. In CSCI 207, they learned about all aspects of project management via experiential learning. They acted as project management ‘consultants’ to the OpenOrbiter software teams. To facilitate the creation of the work breakdown structures, they interviewed team leads, attended team meetings and discussed current progress and needs with members of the teams. In some cases, they collected additional information from reference sources and/or spoke with other teams which would be the ‘customer’ of a particular area of the software system. These …

A Proposed Learner-Centered Mechatronics Engineering Instructional Program, Patrick N. Currier, Richard Goff, Janis Terpenny

Patrick N. Currier

This paper examines the need and requirements for a mechatronics degree program. The results of a survey of the few existing programs in this field are provided. Then, using a case study example for Virginia Tech, a proposed mechatronics curriculum based on a learner-centered paradigm is described. The curriculum combines existing courses in mechanical, electrical, and computer engineering with new, hands-on courses to provide students with a chance to practice and explore the subject matter in ways consistent with the demands of both industry and accreditation. This program, if implemented, could provide a university with a unique offering to attract …

Visual Literacy And The Integration Of Parametric Modeling In The Problem-Based Curriculum, Matthew Benedict Assenmacher

Master's Theses and Doctoral Dissertations

This quasi-experimental study investigated the application of visual literacy skills in the form of parametric modeling software in relation to traditional forms of sketching. The study included two groups of high school technical design students. The control and experimental groups involved in the study consisted of two randomly selected groups of students. The participants were exposed to eight weeks of technical drawing and parametric modeling instruction prior to the start of the study.

The potential applications of emerging technologies for the purpose of integrating visual literacy into the curriculum are not fully understood. Society is moving towards a more immediate …

Merging Creative Design And Cad Learning Activities In A Product Design Programme, Pearl O'Rourke, Colm O'Kane, Leslie Smith, Michael Ring

Conference Papers

Traditional learning and teaching methods for creativity differ from those used in a scientific context. Although the creative process can benefit from a certain level of prescription and structural constraint - with time allocated to research, problem definition, conceptualisation and idea development - flexibility and fluidity are necessary for creative innovation. In contrast, the more linear and rigid pedagogies associated with science and engineering education facilitate efficient learning of subjects such as those based on software packages, manufacturing and materials theory or mechanics. This paper describes the development of a project which aims to establish constructive links between the learning …

A Curriculum-Integrated Small Spacecraft Program For Interdisciplinary Education, Jeremy Straub, Anders Nervold, Josh Berk

Jeremy Straub

Space generates inspiration, aspiration, and passion in many students, traits that are often lacking in the traditional college classroom. By utilizing a meaningful space project with a tangible product, which serves a valuable purpose in the curriculum, instructors can generate passion in their students with regards to the topics being explored. Additionally, it can fuel interest in aerospace science and commerce, guiding more students towards valuable STEM degrees and job opportunities, which can lead to future growth and fresh blood in the aging aerospace employee pool.

OpenOrbiter is a student-run research project at the University of North Dakota that can …

The Road To A Space Solar Power Cubesat In North Dakota, Corey Bergsrud, Jeremy Straub, Sima Noghanian

Jeremy Straub

Presents current work at the University of North Dakota related to the long-term development of a Solar Power Satellite (SPS).

Defining Characteristics Of An Integrated Stem Curriculum In K-12 Education, Vinson Robert Carter

Graduate Theses and Dissertations

The purpose of the study was to obtain consensus concerning the defining characteristics of integrated STEM (Science, Technology, Engineering, and Mathematics) curriculum. This study utilized a three round modified Delphi study to solicit recommendations from experts of STEM education in order to: 1) create a set of categorical and defining curricular components needed to develop and implement appropriate integrated STEM curriculum; 2) identify the characteristics that set integrated STEM education curriculum apart from single-discipline curricula; 3) discuss the components necessary to gauge whether an initiative, project, or curriculum should be referred to as integrated STEM education; and 4) examine whether …

Why Do Indiana Pre-Service Technology Education Majors Choose The Profession, Traves L. Freeland

Purdue Polytechnic Masters Theses

The purpose of this descriptive study was to look at the factors that influence pre-service technology education majors to choose to become teachers. The pre-service teachers of three Indiana technology education teacher preparatory programs were given an internet survey to collect demographic data and determine what factors influence current pre-service teachers. The results of this study were compared to the results from a study done by Harris (2007). The findings resulted in similar factors that were the most common identified as being influential. Those factors included personal interest or hobbies, high school or middle school teacher, and past experiences in …

Updates To A Sequence Of Thermodynamics Experiments For Mechanical Engineering Technology Students, Roger A. Beardsley

All Faculty Scholarship for the School of Graduate Studies and Research

This paper presents an outline of thermodynamics experiments and lab activities that accompany the introductory thermodynamics course for Mechanical Engineering Technology juniors at Central Washington University (CWU) in Ellensburg, Washington. It outlines and describes the current suite of thermodynamics lab activities, comparing the current suite of seven lab activities to a sequence outlined in an ASEE conference paper presented in 1995. Some lab activities in that paper have been replaced, while others have been updated. For example an experiment to measure the Joule-Thomson coefficient has been replaced with a First Law energy balance activity and the former First Law experiment …

Top-Ten It Issues, 2013: Welcome To The Connected Age, Susan Grajek, David Rotman

Administrative Personnel Publications

No abstract provided.

Towards A “Cloud Curriculum” In Art And Science?, Roger Malina

The STEAM Journal

Recently an email hit my desk from Paul Thomas in Australia with a proposal to work together on a “Cloud Curriculum for Art and Science”. I immediately agreed to collaborate. I don’t yet have a clue of what a cloud curriculum is, but what I do know is that we are ‘backing into the future’ in educational institutions and we desperately need a ‘cloud curriculum.’ We need to look over the ten year horizon. And in the emerging art-science field I doubt that the usual approach to curriculum development will work.

Steam...Now!, John Eger

The STEAM Journal

With America slowly awakening to the need to turn out creative and innovative workers who can join the 21^st century (its already 2012) workplace -- because they have the new thinking skills --we have to change the current emphasis on STEM, for Science, Technology, Engineering and Math to STEAM, by insuring that the whole brain is nurtured through the arts: thus STEAM.

Getting Real About The E In Steam, James Catterall

The STEAM Journal

STEM and STEAM are in the news. Researchers and educators in my field (cognition, art, and creativity) argue reasons for adding the A to STEM. While I visit this below, my focus is elsewhere. In this brief essay, I want to explore the meaning and importance of the E appearing in both STEM and STEAM. What’s engineering doing in this mix? And what are some reasons for affirming the arts when the role of engineering is clarified?

I2StemE - What, Who, Where?, Kania Greer, Bob Mayes

Interdisciplinary STEM Teaching & Learning Conference (2012-2019)

I²STEM^e is a new Institute on the campus of GSU whose focus is to increase opportunities for K-20 students, teachers, and businesses to partner together to improve STEM Education in Georgia around the tenets of place-based learning, problem based learning and teaching for understanding.

Feedback Dynamics In The Academic And Industrial Environment, David Kennedy, Dermot Mcgarthy

Conference Papers

Feedback is essential in all companies, in society and in educational environments. We learn, improve and develop from it in our examinations, group work, work environment and relationships. Feedback however must be supported with good communications and be consistent. In the classroom environment this means providing feedback in a positive and supportive manner, and being consistent to all. Most if not all managers and leaders, including lecturers have not undertaken any form of training in feedback methods and therefore it is not translated effectively, causing stress or misguidance to students and colleagues. This paper highlights the importance of good feedback, …

Using Plankton Imaging Technology And Computer Science For Biological Oceanographic Advancement And Education, Adam T. Greer

Adam T. Greer

Oceanography is an inherently interdisciplinary subject that combines observations of physics, biology, chemistry, and their interactions. While most physical and chemical measurements can be made on small scales (cm to m) through the use of sensors (temperature, salinity, pH, etc.), traditional tools to understand the biology of the ocean have only allowed for coarse sampling resolution (i.e., plankton nets sample large portions of the water column). New imaging technology enables the biological component of the ocean to be sampled on the same scale as the physical and chemical, allowing scientists to finally address the interactions among different oceanographic processes. Image …

The Openorbiter Program: Intrepreneurship, Entrepreneurship And Innovation, Jeremy Straub

Jeremy Straub

The University of North Dakota’s OpenOrbiter program is providing an interdisciplinary learning experience for students from numerous STEM and non-STEM fields. OpenOrbiter allows student participants to experience not just the engineering and other technical aspects of the space program, it also involves students from diverse, non-STEM fields (including communications, entrepreneurship, management, visual arts, public policy and English). Traditional STEM fields such as mathematics, physics, electrical engineering, mechanical engineering, computer science and technology are also well represented. Students from specially programs at the University of North Dakota including atmospheric sciences, Earth System Sciences and Policy, aviation, Space Studies and Air Traffic …

The International Trafficking In Arms Regulations: Precluding Innovation In Academic Spacecraft Engineering — Or Are They?, Jeremy Straub, Joe Vacek

Jeremy Straub

Government regulations and uncertainty about their enforcement can be a significant barrier to innovation. In business, it is undesirable to consume time and other resources developing a product that cannot be sold or which requires navigating significant bureaucracy for each sale. In academ-ia, where limited funding is available prior to the submission of a grant pro-posal and receipt of an award, proposal-stage compliance costs can derail a project long before it begins. This paper reviews the International Traffick-ing in Arms Regulations (ITAR) and their impact on spacecraft research in academia, private research labs and industry. It reviews the exemptions available, …

The Nucleus 2012-2013, Rrosalie A. Richards

Science Education Center

No abstract provided.

Risk Analysis & Management In Student-Centered Spacecraft Development Projects, Jeremy Straub, Ronald Fevig, James Casler, Om Yadav

Jeremy Straub

Student involvement in any engineering project introduces an element of risk. This risk is particularly pronounced with small spacecraft projects, as a failure of the spacecraft on-orbit can result in a complete failure of the mission. However, student involvement in these projects is critical to allow research aims to be accomplished, in a university setting, and to train the next generation of spacecraft engineering professionals. The nature of risks posed by student involvement is discussed and a framework for assessing and mitigating these risks presented.