Engineering Commons^™

The Design Estimate Of A Warehouse Refrigeration System, Jackson Dear

Honors Theses

The intention of this project was to provide a design and cost estimate for the refrigeration systems within an industrial cold storage distribution center for Magnolia Country Frozen Foods, Inc. in East Rutherford, NJ. The facility includes eighteen 300,000 ft3 units (200 ft x 100 ft x 15 ft). These units require 200 tons of refrigeration at a maintained temperature of 0oF. This project's scope included choosing an optimal refrigeration system, selecting a refrigerant for use within the system, and providing a cost estimate for the purchase of the refrigeration system equipment and for the yearly cost associated with running …

Features Designing Special Clothing For The Hot Climate Of Uzbekistan, N Kh Mirtalipova, N A. Isaxujayeva

Technical science and innovation

This paper considers the issues of establishing the relationship between the properties of fabric, clothing design and the comfort of clothing; communication of the size of the human body, allowance for free fitting, modern design when developing the design of clothing; connection of the allowance for free fitting with a suitable air gap. A diagram is given that characterizes the dependence of the comfort of clothing on its design and properties of fabrics. A mathematical model of the processes of air exchange in the underwear space is considered, which will allow obtaining more complete information and establishing more stringent dependences …

Optimization And Analysis Of A Styrene Production Process, Alexis Kimpel

Honors Theses

The production of styrene from ethylbenzene in Unit 500 is designed to start up in 2024 and operate for 12 years after startup. The engineering team was tasked with designing the process, creating an economic model, and optimizing the net present value (NPV). The process was simulated in AVEVA PRO/II Simulation for the design process and to estimate the size of equipment. Parametric and topological optimization was performed subsequently on the unit operations in the process. The NPV was improved by $423M from a base case of -$919M to an optimized case of -$496M. The project is recommended to continue …

Design And Perspective Of Amorphous Metal Nanoparticles From Laser Synthesis And Processing, Shun-Xing Liang, Lai-Chang Zhang, Sven Reichenberger, Stephan Barcikowski

Research outputs 2014 to 2021

Amorphous metal nanoparticles (A-NPs) have aroused great interest in their structural disordering nature and combined downsizing strategies (e.g. nanoscaling), both of which are beneficial for highly strengthened properties compared to their crystalline counterparts. Conventional synthesis strategies easily induce product contamination and/or size limitations, which largely narrow their applications. In recent years, laser ablation in liquid (LAL) and laser fragmentation in liquid (LFL) as "green"and scalable colloid synthesis methodologies have attracted extensive enthusiasm in the production of ultrapure crystalline NPs, while they also show promising potential for the production of A-NPs. Yet, the amorphization in such methods still lacks sufficient rules …

Design, Synthesis, And Characterization Of Monometallic And Bimetallic Catalysts, Sonia Eskandari

Theses and Dissertations

Supported catalysts are used extensively in a variety of heterogeneously catalyzed reactions for industrial processes. Techniques for preparing supported noble metal catalysts are typically chosen to achieve high metal dispersions in order to obtain high activity for a given metal loading. Enhancing the catalytic performance of heterogeneous catalysts can be done by increasing active site count as well as modification of the physico-chemical characteristics of the catalyst material. For supported metal nanoparticles this can be achieved by decreasing particle size, thus increasing dispersion or metal utilization on the surface of the particles, while modification of metal properties can be attained …

Computational Materials Characterization, Discovery, And Design With High Performance Computing, Qunfei Zhou, Xiaotao Liu, Tyler Maxwell, Thomas John Balk, Matthew J. Beck

Commonwealth Computational Summit

No abstract provided.

Shear Driven Micro-Fluidic Pump For Cardiovascular Applications, Nihad E. Daidzic

Aviation Department Publications

A valveless shear-driven micro-fluidic pump design (SDMFP) for hemodynamic applications is presented in this work. One of the possible medical and biomedical applications is in-vivo hemodynamic (human blood circulation) support/assist. One or more SDMFPs can be inserted/implanted into vascular lumens in a form of a stent/duct in series and/or in parallel (bypass duct) to support blood circulation in-vivo. A comprehensive review of various micro-pump designs up to about mid 2000’s is given in [1,2]. Many of micropump designs considered are not suitable for in-vivo or even in-vitro medical/biomedical applications.

Operating principles, design, and SDMFP features are given in [3]. A …

Practical Performance Analysis Of An Industrial-Scale Ultrafiltration Membrane Water Treatment Plant

Faculty of Engineering University of Malaya

Common design and operational issues to evaluate the performance of an ultrafiltration (UF) membrane water treatment plant are highlighted with a case study on an industrial-scale drinking water treatment plant located in Malaysia. This treatment plant has been in operation since February 2013 using dead-end polyethersulfone UF membrane filtration system to produce up to 14 million litres a day of drinking water to a small township. Literature solutions are compared with the practised solutions and elucidated with the case study. Gaps between literature solutions which are mainly based on lab-scale research and industry practices are identified. Reducing this gap will …

Study Level Design And Economic Analysis Of A 7 Mw Bromine-Polysulfide Redox Flow Battery, David Lawson Allen, Kelli Jean Byrne, Amanda Marie Jones, Allie Southerland

Chancellor’s Honors Program Projects

No abstract provided.

Effect Of Using Adjusted Parameters, Local And Global Optimums, For Phase Equilibrium Prediction On The Synthesis Of Azeotropic Distillation Columns, Claudia Gutierrez-Antonio, Andrea Ojeda-Gasca, Adrian Bonilla-Petriciolet, Juan Gabriel Segovia-Hernández, Abel Briones-Ramírez

Adrian Bonilla-Petriciolet

We analyze the effect of using adjusted parameters, corresponding to local and global optimums, in the NRTL thermodynamic model on the complete process synthesis (design, optimization and control) of homogeneous azeotropic distillation columns. The adjusted parameters that corresponding to a global optimum were obtained with simulated annealing technique, while the adjusted parameters that corresponding to a local optimum were taken from Dechema Collection. Both sets of parameters were used to design a conventional sequence, a side-stream column and a Petlyuk sequence. These designs were used as initial solution to a multiobjective genetic algorithm with constraints handling, coupled to a processes …

Optimization Of Alternative Distillation Sequences For Natural Gas Sweetening, Carlos E. Torres-Ortega, Juan Gabriel Segovia-Hernandez, Fernando I. Gomez-Castro, Salvador Hernandez, Adrian Bonilla-Petriciolet, Beng G. Rong, Massimiliano Errico

Adrian Bonilla-Petriciolet

The separation of CO2 and/or H2S from the natural gas processing is focused on preventing some undesired effects, as decreasing the heat capacity in the natural gas, and so on. Moreover, the carbon dioxide removal has an extensive interest in other application fields, like mitigating CO2 emissions, being an entrainer in EOR (Enhanced Oil Recovery), among others. One novelty alternative to deal with CO2 separation consists in the use of cryogenic extractive distillation by utilizing as entrainer the liquid hydrocarbon fraction obtained in the process. This process has some advantages, such as that the entrainer is CO2 selective, noncorrosive, and …

A Base Case Design And Capital Cost Analysis Of An All Vanadium Redox-Flow Battery, Mark Alan Moore

Masters Theses

Interest in the development of redox-flow batteries (RFBs) for large-scale grid storage is growing, and considerable investments have been made into the research and development of RFBs over the past few decades. Unfortunately, practical implementation has been hampered by various cost and performance issues typical of an immature state of development. One critical factor for the competitiveness of this technology is the installed cost. The purpose of this work is to develop an evolutionary procedure to be used for the base-case design of a Vanadium Redox-Flow Battery, and to incorporate recent developments in all-vanadium RFB research in order to present …

Biodiesel Reactor Design With Glycerol Separation To Increase Biodiesel Production Yield, Budy Rahmat, Imas Siti Setiasih, Roni Kastaman

Makara Journal of Technology

The study consisted of reactor design used for transesterification process, effect of glycerol separation on transesterification reaction, determination of biodiesel quality, and mass balance analysis. The reactor was designed by integrating circulated pump/stirrer, static mixer, and sprayer that intensify the reaction in the outer tank reactor. The objective was to reduce the use of methanol in excess and to shorten the processing time. The results showed that the reactor that applied the glycerol separation was able to compensate for the decreased use of the reactant methanol from 6:1 to 5:1 molar ratio, and changed the mass balance in the product, …

Oxidative Mineralisation Of Petroleum Refinery Effluent Using Fenton-Like Process, Abdul Aziz Abdul Raman

Abdul Aziz Abdul Raman

Petroleum refinery effluents (PREs) are wastewaters characterised by high values of chemical oxygen demand (COD) and total organic carbon (TOC). Mineralisation of PRE is not commonly reported. For Fenton oxidation, in particular, reported PRE mineralisation is low. In this paper, treatability of a petroleum refinery effluent using a Fenton-like oxidative reaction is described. A statistically designed experimental matrix was used to evaluate the individual and combined effects of process variables based on a five-level central composite design (CCD). Response surface methodology (RSM) was employed to optimise the parameters of interest (COD and TOC), and response surface equations were subsequently developed. …

Simulated Annealing Technique To Design Minimum Cost Exchanger, Sandip K. Lahiri

Dr. Sandip Kumar Lahiri

Owing to the wide utilization of heat exchangers in industrial processes, their cost minimization is an important target for both designers and users. Traditional design approaches are based on iterative procedures which gradually change the design and geometric parameters to satisfy a given heat duty and constraints. Although well proven, this kind of approach is time consuming and may not lead to cost effective design as no cost criteria are explicitly accounted for. The present study explores the use of non-traditional optimization technique called simulated annealing (SA), for design optimization of shell and tube heat exchangers from an economic point …

Application Of Natural Clay To Formulate Nontraditional Completion Fluid That Triples Oil Productivity, Abdul Aziz Abdul Raman

Abdul Aziz Abdul Raman

Adverse effect of the highly biorecalcitrant compound phenol to the environment is well established and its concentrations in industrial effluents vary greatly from 2.8 to 6,800 mg/l depending on the source. Fenton process effectively mineralises to CO(2) and H(2)O but reported works consumed more reagents and require longer reaction times. Due to the strong interaction between the several predictor variables in the Fenton oxidation, response surface methodology was used to optimise the mineralization treatment. Efficient, faster and economical operating conditions for phenol removal were explored by investigating four parameters namely the concentration ratio of hydrogen peroxide to phenol - ((H(2)O(2)):(Phenol)), …

Design Of Equipment For The Study Of Non-Isothermal Flow In Polymer Fluid, Opeoluwa Oluwaseun Kolawole

Masters Theses

The polymer industry is an ever growing industry, and, as it grows, companies are continuously looking for ways to study and understand the behaviors of polymers in relation to the processing and production. This is to ensure the production of high quality products and to improve existing products.
An important parameter during polymer processing is temperature. Temperature control affects several rheological parameters such as viscosity, and in turn the quality of the final products. Frictional or viscous heating is a very important part of polymer processing and occurs in almost every polymer processing operation.
The objective of this research is …

Design Of Novel Drug Delivery System And Optimal Dosage Regimens, Kwang Seok Kim

Dissertations

Three representative drug delivery systems were analyzed to emphasize the roles of mathematical models and computer-aided simulations in pharmaceutical research. In the first project, a protocol was developed so that the optimal regimen, consisting of the intravenous boluses and subsequent infusion of theophylline, could be obtained once information on the pharmacokinetics became available. The method was based on a two-compartment model of the human body. A module was created and posted on a website for free access. The second project dealt with the transdermal heat-assisted delivery of corticosterone. Heat conduction and drug diffusion through the patch and the skin were …

Comparative Studies On Oxygen Mass Transfer For The Design And Development Of A Single-Use Fermentor, Kristan L. Sorenson

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Accurate experimental oxygen mass transfer coefficient, a measure of how quickly oxygen travels from a gas bubble to the bulk liquid, is important for comparing performance and for evaluating the oxygen transfer capability of a fermentor. Delays in probe response and changing gas volumes upon start-up of gassing affect the accuracy of oxygen transfer measurements. To mitigate these inaccuracies, a standard correction procedure for oxygen mass transfer data was established for highly oxygenated, well-mixed fermentation systems. Probe response time correction was generated by applying a second-order response model to dissolved oxygen probes and shown to be effective within 4%. By …

Hydrodynamic Aspects And Correlations For The Design Of Draft-Tube Conical Spouted Beds, H. Altzibar, S. Alvarez, M.J. San José, R. Aguado, J. Bilbao, Martin Olazar

The 12th International Conference on Fluidization - New Horizons in Fluidization Engineering

A study has been carried out on the hydrodynamics of conical spouted beds with draft tube. Correlations have been proposed for calculating minimum spouting velocity, operating pressure drop and peak pressure drop as functions of dimensionless module that take into account geometric factors, particle characteristics and operating conditions.

Development And Model Formulation Of Scalable Carbon Nanotube Processes: Hipco And Comocat Process Models, Adedeji Ebenezer Agboola

LSU Master's Theses

Carbon nanotubes are seamless cylindrical tubes, consisting of carbon atoms arranged in a regular hexagonal structure. It is considered as the ultimate engineering material because of its unique and distinct electronic, mechanical and material characteristics. The discovery of these materials pioneered the nanotechnology revolution, which encompasses a broad and multidisciplinary spectrum, including nanomaterials, nanobiotechnology, and nanoelectronics. Hundreds of published articles of laboratory scale and pilot plant processes were reviewed that describe potential synthesis and post–synthesis purification methods for large scale production of carbon nanotubes. The main production technologies include electric arc discharge, laser vaporization, and catalytic chemical vapor deposition. These …

Mathematical Model Of A Lithium/Polypyrrole Cell, Taewhan Yeu, Ralph E. White

Faculty Publications

A mathematical model to simulate the charge/discharge behavior of a lithium/lithium perchlorate-propylene carbonate/polypyrrole(Li/LiClO₄-PC/PPy) secondary battery cell is presented. The model can be used to gain a better understanding of the behavior of this cell and to provide guidance toward the design of new secondary batteries which utilize an electronically conductive polymer such as polypyrrole (PPy) as the cathode. The model includes the capability of handling charge and discharge behavior and is used to study the effect of various design parameters on the performance of the cell.